Paramita Das
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Paramita Das has a total of 111 co-authors. Here are the top co-authors by number of shared publications:
- Hongwei Duan
School of Chemistry, Chemical Engineering and Biotechnology, Nanyang Technological University, 70 Nanyang Drive, Singapore 637457, Singapore
7 shared publications - Andreas Walther
DWI – Leibniz-Institute for Interactive Materials, 52074 Aachen, Germany
5 shared publications - Roop Singh Lodhi
Department of Chemical Engineering Indian Institute of Science Education and Research Bhopal Bhopal Bypass Road Bhopal Madhya Pradesh 462066 India
4 shared publications Van Cuong Mai
School of Chemical and Biomedical Engineering Nanyang Technological University 62 Nanyang Drive Singapore 637459 Singapore
4 shared publicationsAndreas Walther
DWI-Leibniz-Institute for Interactive Materials, Forckenbeckstr. 50, 52056 Aachen, Germany
3 shared publicationsPankaj Kumar
Indian Institute of Science Education and Research
3 shared publications
Latest Publications
- 29 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (19) , 17410-17420
Self-Assembled Template Assisted Gram-Scale Synthesis of Uniform Silica Nanotubes for Proton Conductivity Enhancement
Marine organisms such as diatoms and sponges fabricate hierarchically ordered siliceous architectures with nanoscale precision under benign conditions. Inspired by these biological strategies, biomimetic approaches have been developed to synthesize chiral silica-based materials under mild conditions. Here, we employed the molecular self-assembly of a small molecule viz. l-NapF-EDA to template the formation of chiral, anisotropic silica nanotubular structures. The self-assembly of l-NapF-EDA spontaneously generates a localized basic microenvironment near the nanofiber surface, directing silica condensation and enabling the controlled formation of uniform silica nanotubes without the need for an external base. The resulting nanotubes exhibit a well-defined hollow tubular morphology with an outer diameter of 61.26 ± 12.5 nm and an inner diameter of 39.6 ± 4.3 nm, yielding a high aspect ratio characteristic of one-dimensional (1D) nanostructures. Notably, the self-assembly templated mineralization process affords a remarkably high product yield: 1.5 g of silica nanotubes can be produced from as little as 100 mg of gelator, underscoring the efficient templating capability of the supramolecular scaffold. Postsynthetic amine functionalization imparts tunable surface chemistry while preserving the nanotubular morphology. Leveraging the elongated architecture and interfacial functionality of these silica nanotubes, they were incorporated into sulfonated poly(vinyl alcohol) (SPVA) membranes, achieving 45% enhancement in proton conductivity at room temperature (61.1 ± 1.2 vs 42.1 ± 1.6 mS cm–1) with an ultralow filler loading of 0.1 wt % relative to pristine SPVA. These results demonstrate how biomimetic mineralization and interfacial engineering can be integrated to develop functional materials with tailored properties.
- 29 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (19) , 17410-17420
Self-Assembled Template Assisted Gram-Scale Synthesis of Uniform Silica Nanotubes for Proton Conductivity Enhancement
Marine organisms such as diatoms and sponges fabricate hierarchically ordered siliceous architectures with nanoscale precision under benign conditions. Inspired by these biological strategies, biomimetic approaches have been developed to synthesize chiral silica-based materials under mild conditions. Here, we employed the molecular self-assembly of a small molecule viz. l-NapF-EDA to template the formation of chiral, anisotropic silica nanotubular structures. The self-assembly of l-NapF-EDA spontaneously generates a localized basic microenvironment near the nanofiber surface, directing silica condensation and enabling the controlled formation of uniform silica nanotubes without the need for an external base. The resulting nanotubes exhibit a well-defined hollow tubular morphology with an outer diameter of 61.26 ± 12.5 nm and an inner diameter of 39.6 ± 4.3 nm, yielding a high aspect ratio characteristic of one-dimensional (1D) nanostructures. Notably, the self-assembly templated mineralization process affords a remarkably high product yield: 1.5 g of silica nanotubes can be produced from as little as 100 mg of gelator, underscoring the efficient templating capability of the supramolecular scaffold. Postsynthetic amine functionalization imparts tunable surface chemistry while preserving the nanotubular morphology. Leveraging the elongated architecture and interfacial functionality of these silica nanotubes, they were incorporated into sulfonated poly(vinyl alcohol) (SPVA) membranes, achieving 45% enhancement in proton conductivity at room temperature (61.1 ± 1.2 vs 42.1 ± 1.6 mS cm–1) with an ultralow filler loading of 0.1 wt % relative to pristine SPVA. These results demonstrate how biomimetic mineralization and interfacial engineering can be integrated to develop functional materials with tailored properties.
- 19 August 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (34) , 15310-15325
Superior Catalytic Performance of Nickel-Doped Graphitic Carbon Nitride Toward Visible-Light-Mediated Synthesis of Functionalized 4 H -Chromenes: A Green and Sustainable Approach
Among the diverse photocatalyst, nickel-doped graphitic carbon nitride (Ni@g-C3N4) has become a focus of extensive research as an efficient photocatalyst due to its excellent chemical stability, favorable band structure, and ease of synthesis. In this report, we have documented the synthesis of functionalized 4H-chromene using Ni@g-C3N4 as a heterogeneous photocatalyst. Various spectroscopic techniques were employed to characterize the catalyst. The photocatalytic activity of the synthesized Ni@g-C3N4 was examined for the synthesis of 4H-chromene derivatives in an aqueous medium. Ni@g-C3N4 showcased much better catalytic activity than g-C3N4 itself. Moreover, it demonstrated excellent recyclability, retaining its catalytic efficiency and affording consistently high product yield over five cycles without any distinct decline in efficiency. Gram-scale synthesis of the reaction illustrates the industrial applicability of the present protocol. Additionally, high product yields, wide functional group tolerance, operational simplicity, and facile catalyst recovery contribute to the process toward green and sustainable development.
- 19 August 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (34) , 15310-15325
Superior Catalytic Performance of Nickel-Doped Graphitic Carbon Nitride Toward Visible-Light-Mediated Synthesis of Functionalized 4 H -Chromenes: A Green and Sustainable Approach
Among the diverse photocatalyst, nickel-doped graphitic carbon nitride (Ni@g-C3N4) has become a focus of extensive research as an efficient photocatalyst due to its excellent chemical stability, favorable band structure, and ease of synthesis. In this report, we have documented the synthesis of functionalized 4H-chromene using Ni@g-C3N4 as a heterogeneous photocatalyst. Various spectroscopic techniques were employed to characterize the catalyst. The photocatalytic activity of the synthesized Ni@g-C3N4 was examined for the synthesis of 4H-chromene derivatives in an aqueous medium. Ni@g-C3N4 showcased much better catalytic activity than g-C3N4 itself. Moreover, it demonstrated excellent recyclability, retaining its catalytic efficiency and affording consistently high product yield over five cycles without any distinct decline in efficiency. Gram-scale synthesis of the reaction illustrates the industrial applicability of the present protocol. Additionally, high product yields, wide functional group tolerance, operational simplicity, and facile catalyst recovery contribute to the process toward green and sustainable development.
- 9 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (50) , 23857-23876
Electrochemical Sensor Based on Polydopamine-Coated Silver Nanowire/Defect-Ridden UiO-66-NH 2 Nanocomposites for Trace Detection of Cd(II) and Pb(II) Ions in Water
- 9 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (50) , 23857-23876
Electrochemical Sensor Based on Polydopamine-Coated Silver Nanowire/Defect-Ridden UiO-66-NH 2 Nanocomposites for Trace Detection of Cd(II) and Pb(II) Ions in Water
- 11 April 2025
- Published by Wiley in Macromolecular Chemistry and Physics
- Vol. 226 (13)
Efficient Removal of Cationic Dye Using Rice Straw‐Derived Cellulose Nanocrystal‐Based Adsorptive Nanocomposite Membranes
This work demonstrates the development of adsorptive nanocomposite membranes for the efficient removal of cationic dye from water. The bio‐based adsorptive membrane is prepared using polyvinyl alcohol (PVA) and polydopamine (PDA)‐modified cellulose nanocrystals (PDA@CNCs) supported on a Whatman filter paper via vacuum filtration. The structural characterizations, surface morphology, effects of different operational parameters on methylene blue (MB) dye adsorption by the PVA/PDA@CNC membranes are evaluated. The synthesized membrane with PVA to PDA@CNC feed ratio at 50/50 (PVA/PDA@CNC‐50/50) achieved 98.2% removal efficiency and 1.18 mg g −1 adsorption capacity in 48 h. under the optimized conditions. The adsorption study under shaking at 150 RPM speed further enhanced the membrane performance, exhibiting 93.2% removal efficiency within 8 h of contact time. Regeneration studies demonstrated that the PVA/PDA@CNC = 50/50 membrane maintained over 95% removal efficiency even after five adsorption‐desorption cycles. The pseudo second‐order model best described the kinetics of the adsorption process of the nanocomposite membranes. The experimental data also fitted well with the Freundlich isotherm model predicting that the adsorbent has multilayer adsorption sites on its heterogeneous surface. The nanocomposite membrane also shows good removal performance for Janus Green B, thus displaying its versatility in adsorbing different cationic dyes from water.
- 11 April 2025
- Published by Wiley in Macromolecular Chemistry and Physics
- Vol. 226 (13)
Efficient Removal of Cationic Dye Using Rice Straw‐Derived Cellulose Nanocrystal‐Based Adsorptive Nanocomposite Membranes
This work demonstrates the development of adsorptive nanocomposite membranes for the efficient removal of cationic dye from water. The bio‐based adsorptive membrane is prepared using polyvinyl alcohol (PVA) and polydopamine (PDA)‐modified cellulose nanocrystals (PDA@CNCs) supported on a Whatman filter paper via vacuum filtration. The structural characterizations, surface morphology, effects of different operational parameters on methylene blue (MB) dye adsorption by the PVA/PDA@CNC membranes are evaluated. The synthesized membrane with PVA to PDA@CNC feed ratio at 50/50 (PVA/PDA@CNC‐50/50) achieved 98.2% removal efficiency and 1.18 mg g −1 adsorption capacity in 48 h. under the optimized conditions. The adsorption study under shaking at 150 RPM speed further enhanced the membrane performance, exhibiting 93.2% removal efficiency within 8 h of contact time. Regeneration studies demonstrated that the PVA/PDA@CNC = 50/50 membrane maintained over 95% removal efficiency even after five adsorption‐desorption cycles. The pseudo second‐order model best described the kinetics of the adsorption process of the nanocomposite membranes. The experimental data also fitted well with the Freundlich isotherm model predicting that the adsorbent has multilayer adsorption sites on its heterogeneous surface. The nanocomposite membrane also shows good removal performance for Janus Green B, thus displaying its versatility in adsorbing different cationic dyes from water.
- Open Access
- 10 March 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Enzymatic Crosslinking of Polyelectrolyte Complexes Produces Strong, Reconstitutable Biomedical Adhesives
Tissue adhesives that offer rapid wound sealing, reduce blood loss, enhance aesthetic outcomes, and lower biomedical issues can significantly augment the wound treatment regimen. Taking inspiration from proteinaceous adhesives secreted by marine organisms, herein we designed anionic and cationic polyamide polyelectrolytes (PEs) containing Horseradish Peroxidase (HRP)-responsive phenolic pendants. These PEs underwent facile polyelectrolyte complex (PEC) formation in aqueous medium. The PEC-rich phase was employed to formulate water-based biomedical adhesives that demonstrated robust adhesion to diverse surfaces - from biological tissues like bone to materials such as wood, glass, and metal. The PEC adhesive worked on both dry and wet substrates and its adhesive strength increased with environmental humidity. The strongest adhesion was found for wood with adhesive strength up to 10 MPa. The adhesive could be kept in a lyophilized powder form and reconstituted prior to use without significant impact on the adhesive performance. Furthermore, the PEC adhesive exhibited strong hemostatic and wound-healing capabilities in vivo in mice, significantly surpassing the commercial cyanoacrylate-based tissue adhesives in performance. These findings, coupled with the adhesive's biocompatibility and hemocompatibility, position these enzyme-cured PEC adhesives as promising contender in wound healing applications.
- 10 March 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessEnzymatic Crosslinking of Polyelectrolyte Complexes Produces Strong, Reconstitutable Biomedical Adhesives
Tissue adhesives that offer rapid wound sealing, reduce blood loss, enhance aesthetic outcomes, and lower biomedical issues can significantly augment the wound treatment regimen. Taking inspiration from proteinaceous adhesives secreted by marine organisms, herein we designed anionic and cationic polyamide polyelectrolytes (PEs) containing Horseradish Peroxidase (HRP)-responsive phenolic pendants. These PEs underwent facile polyelectrolyte complex (PEC) formation in aqueous medium. The PEC-rich phase was employed to formulate water-based biomedical adhesives that demonstrated robust adhesion to diverse surfaces - from biological tissues like bone to materials such as wood, glass, and metal. The PEC adhesive worked on both dry and wet substrates and its adhesive strength increased with environmental humidity. The strongest adhesion was found for wood with adhesive strength up to 10 MPa. The adhesive could be kept in a lyophilized powder form and reconstituted prior to use without significant impact on the adhesive performance. Furthermore, the PEC adhesive exhibited strong hemostatic and wound-healing capabilities in vivo in mice, significantly surpassing the commercial cyanoacrylate-based tissue adhesives in performance. These findings, coupled with the adhesive's biocompatibility and hemocompatibility, position these enzyme-cured PEC adhesives as promising contender in wound healing applications.
- Top Cited Papers
- 16 January 2025
- Published by Wiley in Chempluschem
- Vol. 90 (3) , e202400643
A Review on Sustainable Slow‐Release N, P, K Fertilizer Hydrogels for Smart Agriculture
The agricultural sector of any country plays a pivotal role in its economy. Irrigation and the provision of appropriate nutrient levels in soil are essential for optimizing plant growth and enhancing crop productivity. To support the increasing need for food due to the growing population worldwide, synthetic fertilizers have been widely used in the agricultural sector. These fertilizers could readily dissolve in the irrigation water or soil moisture, causing excessive release of the nutrients that plants cannot uptake from the root zone. The excess nutrients in the soil further harm the environment via surface run‐off, leaching, and volatilization. Thus, materials with high water absorption and retention capacity, and precise control over the prolonged fertilizer release offer a potential solution to address these issues. To meet these requirements, the development of slow‐release fertilizer hydrogels (SRFHs) represents a promising approach. SRFHs serve as natural agrochemicals to enhance crop growth and yield through controlled and self‐sustained delivery of water and nutrients. This review provides a comprehensive study on the recent advancements in SRFHs, including their preparation methods, properties, slow‐release behavior, and applications in smart agriculture. The response of soil microbial diversity to slow‐release fertilizers is briefly discussed, and the future potential of SRFHs is highlighted herein.
- 16 January 2025
- Published by Wiley in Chempluschem
- Vol. 90 (3) , e202400643
Top Cited PapersA Review on Sustainable Slow‐Release N, P, K Fertilizer Hydrogels for Smart Agriculture
The agricultural sector of any country plays a pivotal role in its economy. Irrigation and the provision of appropriate nutrient levels in soil are essential for optimizing plant growth and enhancing crop productivity. To support the increasing need for food due to the growing population worldwide, synthetic fertilizers have been widely used in the agricultural sector. These fertilizers could readily dissolve in the irrigation water or soil moisture, causing excessive release of the nutrients that plants cannot uptake from the root zone. The excess nutrients in the soil further harm the environment via surface run‐off, leaching, and volatilization. Thus, materials with high water absorption and retention capacity, and precise control over the prolonged fertilizer release offer a potential solution to address these issues. To meet these requirements, the development of slow‐release fertilizer hydrogels (SRFHs) represents a promising approach. SRFHs serve as natural agrochemicals to enhance crop growth and yield through controlled and self‐sustained delivery of water and nutrients. This review provides a comprehensive study on the recent advancements in SRFHs, including their preparation methods, properties, slow‐release behavior, and applications in smart agriculture. The response of soil microbial diversity to slow‐release fertilizers is briefly discussed, and the future potential of SRFHs is highlighted herein.
- 18 October 2024
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 6 (21) , 12947-12963
Poly(lactic acid)/Cellulose Nanocrystal-Based Compositional Gradient Nanocomposites with Higher Toughness: Potential for Flexible Packaging
- 18 October 2024
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 6 (21) , 12947-12963
Poly(lactic acid)/Cellulose Nanocrystal-Based Compositional Gradient Nanocomposites with Higher Toughness: Potential for Flexible Packaging
- 7 September 2023
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 6 (18) , 16580-16594
Bioinspired Nanocomposites of Sodium Carboxymethylcellulose and Polydopamine-Modified Cellulose Nanocrystals for UV-Protective Packaging
- 7 September 2023
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 6 (18) , 16580-16594
Bioinspired Nanocomposites of Sodium Carboxymethylcellulose and Polydopamine-Modified Cellulose Nanocrystals for UV-Protective Packaging