NSNathan A. Simmons

Nathan A. Simmons

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nathan A. Simmons has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Improved Regional Moment Tensor Inversion for Moderately Large Earthquakes in the Western United States Using a 3D Earth Model Based on Full Waveform Tomography

    by Andrea Chiang, Arthur J. Rodgers, Lion Krischer, Michael Afanasiev, Christian Boehm, Claire Doody, Nathan Simmons

    The nature of seismic sources for moderately large (moment magnitude, Mw 5.0–6.5) events are commonly characterized by their moment tensor (MT) solutions and obtained by inversion of regional distance (200–1600 km) long-period (20–50 s) waveforms. Regional MT estimates are often calculated from average plane-layered, one-dimensional (1D) velocity models. However, 1D model calculations can produce misfits in the arrival times and waveform shapes that introduce errors, particularly at longer distances or for shorter periods, which are necessary for analyzing lower magnitude events. Approximate Earth models (e.g., 1D) representing broad areas may be inadequate, particularly in the crust and uppermost mantle of tectonically complex regions. In this study, we show how a three-dimensional (3D) Earth model obtained from full waveform inversion tomography can improve waveform fits and decrease phase errors. We developed a platform and workflow to perform routine 3D MT inversions and inverted MTs for 25 earthquakes in the western United States and seven nuclear explosions using an average 1D and a recent 3D Earth model, WUS256 (Rodgers et al., 2022). Using the 3D model improves waveform fits (variance reduction and phase time shifts) compared with the 1D model, and the 3D MT solutions are stable across large distances. This study shows that 3D models obtained from full waveform tomography can improve MTs and source characterization especially at far regional distances (>800 km).


  • Bayesian Inference for the Seismic Moment Tensor Using Regional Waveforms and Teleseismic-P Polarities with a Data-Derived Distribution of Velocity Models and Source Locations

    by Andrea Chiang, Sean R. Ford, Michael E. Pasyanos, Nathan A. Simmons

    The largest source of uncertainty in any source inversion is the velocity model used in the transfer function that relates observed ground motion to the seismic moment tensor. However, standard inverse procedure often does not quantify uncertainty in the seismic moment tensor due to error in the Green’s functions from uncertain event location and Earth structure. We incorporate this uncertainty into an estimation of the seismic moment tensor using a data-derived distribution of velocity models based on complementary geophysical data sets, including thickness constraints, velocity profiles, gravity data, surface-wave group velocities, and regional body-wave travel times. The data-derived distribution of velocity models is then used as a prior distribution of Green’s functions for use in Bayesian inference of an unknown seismic moment tensor using regional and teleseismic-P waveforms. The use of multiple data sets is important for gaining resolution to different components of the moment tensor. The combined likelihood is estimated using data-specific error models and the posterior of the seismic moment tensor is estimated and interpreted in terms of the most probable source type.


  • Adjoint Waveform Tomography for Crustal and Upper Mantle Structure of the Middle East and Southwest Asia for Improved Waveform Simulations Using Openly Available Broadband Data

    by Arthur J. Rodgers, Lion Krischer, Michael Afanasiev, Christian Boehm, Claire Doody, Nathan Simmons

    We present a new model of radially anisotropic seismic wavespeeds for the crust and upper mantle of a broad region of the Middle East and Southwest Asia (MESWA) derived from adjoint waveform tomography. The new model enables fully 3D simulations of complete three‐component waveforms and provides improved fits that were not possible with previous models. We inverted over 32,000 waveforms from 192 earthquakes recorded by over 1000 openly available broadband seismic stations from permanent and temporary networks in the region with highly uneven coverage. Inversion iterations proceeded from the period band 50–100 s in six stages and 54 total iterations reducing the minimum period to 30 s. Our final model, MESWA, improves waveform fits compared to the starting and other models for both the data used in the inversion and an independent validation set of 66 events. Restitution tests indicate that the model resolves features in the central part of the model to depths of about 150 km. The new model reveals tectonic features imaged by other studies and methods but in a new holistic model of anisotropic shear and compressional wavespeeds (⁠ VS and VP⁠, respectively) covering a larger domain with smaller scale length and amplified features. Examples include low crustal VS in the Tethyan belt and low mantle VS following divergent (Gulf of Aden, Red Sea) and transform (Dead Sea fault) margins of the Arabian plate. Low VS is imaged below Cenozoic volcanic centers of the Mecca–Madina–Nafud Line, Arabian Peninsula, and the Türkiye–Iran border region. Elevated VS tracks Makran subduction under southeast Iran with near vertical dip. MESWA could be used as a starting model for further improvements, say, using waveforms from in‐country seismic networks that are not currently openly available and/or smaller‐scale studies targeting a shorter period. The model could be used to improve earthquake hazard studies and nuclear explosion monitoring.


  • Open Access

    Emulation of seismic-phase traveltimes with machine learning

    by Gemma J Anderson, Stephen C Myers, Nathan Simmons

    SUMMARY: We present a machine learning (ML) method for emulating seismic-phase traveltimes that are computed using a global-scale 3-D earth model and physics-based ray tracing. Accurate traveltime predictions based on 3-D earth models are known to reduce the bias of event location estimates, increase our ability to assign phase labels to seismic detections and associate detections to events. However, practical use of 3-D models is challenged by slow computational speed and the unwieldiness of pre-computed lookup tables that are often large and have prescribed computational grids. In this work, we train a ML emulator using pre-computed traveltimes, resulting in a compact and computationally fast way to approximate traveltimes that are based on a 3-D earth model. Our model is trained using approximately 850 million P-wave traveltimes that are based on the global LLNL-G3D-JPS model, which was developed for more accurate event location. The training-set consists of traveltimes between 10 393 global seismic stations and randomly sampled event locations that provide a prescribed, distance-dependent geographic sample density for each station. Prediction accuracy is dependent on event-station distance and whether the station was included in the training set. For stations included in the training set the mean absolute deviation (MAD) of the difference between traveltimes computed using ray tracing through the 3-D model and the ML emulator for local, regional, and teleseismic distances are 0.090, 0.125 and 0.121 s, respectively. For tested station locations not included in the training set, MAD values for the three distance ranges increase to 0.173, 0.219 and 0.210 s, respectively. Empirical traveltime residuals for a global reference data are indistinguishable when ML emulation or the 3-D model is used to compute traveltimes. This result holds regardless of whether the recording station is used in ML training or not.


  • Open Access

    WUS256: An Adjoint Waveform Tomography Model of the Crust and Upper Mantle of the Western United States for Improved Waveform Simulations

    by A. Rodgers, L. Krischer, M. Afanasiev, C. Boehm, C. Doody, A. Chiang, N. Simmons

    We report a new model (WUS256) of radially anisotropic seismic wavespeeds of the crust and upper mantle of the western United States (WUS) obtained from adjoint waveform tomography for the purpose of improving synthetic waveform fits to observed data. WUS256 is based on inversion of over 94,000 waveforms from 72 earthquakes recorded by nearly 3,400 stations. We started with the SPiRaL global model (Simmons et al., 2021, https://doi.org/10.1093/gji/ggab277) and waveforms in the period band of 50–120 s. We followed a conservative multiscale inversion approach with eight stages and 256 total inversion iterations which enabled monotonic misfit reduction to 20‐s minimum‐period waves. WUS256 relied on time‐frequency (TF) phase misfits and a trust region limited memory Broyden–Fletcher–Goldfarb–Shanno (L‐BFGS) optimization. Hessian‐vector products were used to qualitatively assess model resolution. Results indicate that WUS256 has good coverage of the continental regions to depths of about 150 km and is able to resolve features on lateral scales of about 200 km. We quantify waveform fits by the reduction in TF and normalized amplitude difference misfits between WUS256 and the SPiRaL starting model. WUS256 significantly improves waveform fits with misfit reduction 64% for both inversion and validation data sets compared to the SPiRaL starting model and shows even better fits compared to other models. Waveform fits illustrate that WUS256 reproduces body‐waves, fundamental mode surface waves as well as late arriving dispersed and/or scattered short period surface waves. The improvement in waveform fit indicates that WUS256 can be used to reproduce path effects on regional complete waveforms and moment tensor inversions.


  • Open Access

    SPiRaL: a multiresolution global tomography model of seismic wave speeds and radial anisotropy variations in the crust and mantle

    by N A Simmons, S C Myers, C Morency, A Chiang, D R Knapp

    SPiRaL is a joint global-scale model of wave speeds (P and S) and anisotropy (vertical transverse isotropy, VTI) variations in the crust and mantle. The model is comprised of >2.1 million nodes with five parameters at each node that capture velocity variations for P- and S-waves travelling at arbitrary directions in transversely isotropic media with a vertical symmetry axis (VTI). The crust (including ice, water, sediments and crystalline layers) is directly incorporated into the model. The default node spacing is approximately 2° in the lower mantle and 1° in the crust and upper mantle. The grid is refined with ∼0.25° minimum node spacing in highly sampled regions of the crust and upper mantle throughout North America and Eurasia. The data considered in the construction of SPiRaL includes millions of body wave traveltimes (crustal, regional and teleseismic phases with multiples) and surface wave (Rayleigh and Love) dispersion. A multiresolution inversion approach is employed to capture long-wavelength heterogeneities commonly depicted in global-scale tomography images as well as more localized details that are typically resolved in more focused regional-scale studies. Our previous work has demonstrated that such global-scale models with regional-scale detail can accurately predict both teleseismic and regional body wave traveltimes, which is necessary for more accurate location of small seismic events that may have limited signal at teleseismic distances. SPiRaL was constructed to predict traveltimes for event location and long-period waveform dispersion for seismic source inversion applications in regions without sufficiently tuned models. SPiRaL may also serve as a starting model for full-waveform inversion (FWI) with the goal of fitting waves with periods 10–50 s over multiple broad regions (thousands of kilometres) and potentially the globe. To gain insight to this possibility, we simulated waveforms for a small set of events using SPiRaL and independent waveform-based models for comparison. For the events tested, the performance of the traveltime-based SPiRaL model is shown to be generally on par with regional 3-D waveform-based models in three regions (western United States, Middle East, Korean Peninsula) suggesting SPiRaL may serve as a starting model for FWI over broad regions.


  • Open Access

    Resolution and Covariance of the LLNL-G3D-JPS Global Seismic Tomography Model: Applications to Travel time Uncertainty and Tomographic Filtering of Geodynamic Models

    by N A Simmons, B S A Schuberth, S C Myers, D R Knapp

    Resolution and covariance of global seismic tomography models are most often unknown quantities. However, there are many potential applications of these matrices in the broad solid Earth research community as well as more focused scientific groups including the nuclear explosion monitoring research community. In this study, we construct both the resolution and covariance matrices for the recent LLNL-G3D-JPS global joint model of P- and S-wave velocity. The global model consists of >1 million free parameters, creating matrices with >1 trillion elements. Given the scale of the problem and computational limitations, we used a custom method to calculated impulse responses at every node in the earth model and produced sparse, yet representative, resolution and covariance matrices that can be practically used for several real applications. We apply the matrices to real problems as example use cases. Utilizing the covariance matrix, we computed traveltime uncertainties for thousands of P waves emanating from (or coming to) specified points around the globe and constructed maps of the traveltime error to illustrate the variability of path-specific traveltime uncertainty. Utilizing the resolution matrix as a tomographic filter, we converted geodynamically derived renditions of Earth structure to images that may be visible through the often-distorted lens of seismic tomography.


  • Evidence for long‐lived subduction of an ancient tectonic plate beneath the southern Indian Ocean

    by N. A. Simmons, S. C. Myers, G. Johannesson, E. Matzel, S. P. Grand

    Ancient subducted tectonic plates have been observed in past seismic images of the mantle beneath North America and Eurasia, and it is likely that other ancient slab structures have remained largely hidden, particularly in the seismic‐data‐limited regions beneath the vast oceans in the Southern Hemisphere. Here we present a new global tomographic image, which shows a slab‐like structure beneath the southern Indian Ocean with coherency from the upper mantle to the core‐mantle boundary region—a feature that has never been identified. We postulate that the structure is an ancient tectonic plate that sank into the mantle along an extensive intraoceanic subduction zone that migrated southwestward across the ancient Tethys Ocean in the Mesozoic Era. Slab material still trapped in the transition zone is positioned near the edge of East Gondwana at 140 Ma suggesting that subduction terminated near the margin of the ancient continent prior to breakup and subsequent dispersal of its subcontinents.


  • Top Cited Papers

    LLNL‐G3Dv3: Global P wave tomography model for improved regional and teleseismic travel time prediction

    by N. A. Simmons, S. C. Myers, G. Johannesson, E. Matzel

    We develop a global‐scale P wave velocity model (LLNL‐G3Dv3) designed to accurately predict seismic travel times at regional and teleseismic distances simultaneously. The model provides a new image of Earth's interior, but the underlying practical purpose of the model is to provide enhanced seismic event location capabilities. The LLNL‐G3Dv3 model is based on ∼2.8 millionP and Pnarrivals that are re‐processed using our global multiple‐event locator called Bayesloc. We construct LLNL‐G3Dv3 within a spherical tessellation based framework, allowing for explicit representation of undulating and discontinuous layers including the crust and transition zone layers. Using a multiscale inversion technique, regional trends as well as fine details are captured where the data allow. LLNL‐G3Dv3 exhibits large‐scale structures including cratons and superplumes as well numerous complex details in the upper mantle including within the transition zone. Particularly, the model reveals new details of a vast network of subducted slabs trapped within the transition beneath much of Eurasia, including beneath the Tibetan Plateau. We demonstrate the impact of Bayesloc multiple‐event location on the resulting tomographic images through comparison with images produced without the benefit of multiple‐event constraints (single‐event locations). We find that the multiple‐event locations allow for better reconciliation of the large set of direct P phases recorded at 0–97° distance and yield a smoother and more continuous image relative to the single‐event locations. Travel times predicted from a 3‐D model are also found to be strongly influenced by the initial locations of the input data, even when an iterative inversion/relocation technique is employed.