Kyoungdoug Min
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Kyoungdoug Min has a total of 359 co-authors. Here are the top co-authors by number of shared publications:
Jaebong Sim
15 shared publicationsJeongwoo Lee
Department of Autonomous Vehicle System Engineering, Chungnam National University, Daejeon, South Korea
14 shared publications- Nam Won Kim
Department of Land, Water and Environment Research, Korea Institute of Civil Engineering and Building Technology (KICT), 283 Goyang-daero, Ilsanseo-Gu, Goyang-Si 10223, Korea
12 shared publications Sanghyun Chu
Department of Mechanical Engineering, Seoul National University, Seoul, Republic of Korea
10 shared publicationsHoimyung Choi
Department of Mechanical Engineering, Gachon University, Seongnam, Republic of Korea
9 shared publications- Il-Moon Chung
Department of Hydro Science and Engineering Research, Korea Institute of Civil Engineering and Building Technology, Goyang 10223, Republic of Korea
9 shared publications
Latest Publications
- Open Access
- 23 October 2026
- Published by Elsevier in SSRN Electronic Journal
A Turbulent Flame Speed Model for Consistent Burning Rate Prediction in LES of Lean-Burn Spark-Ignition Engines
Lean-burn spark-ignition (SI) engines are regarded as a promising solution for improving thermal efficiency in next-generation hybrid powertrains; however, their application is limited by increased cycle-to-cycle variation (CCV) caused by unstable early combustion. Large-eddy simulation (LES) is a powerful tool for analyzing CCV because it resolves large-scale turbulence while modeling subgrid-scale effects. In premixed combustion LES, both resolved and modeled turbulence contribute to the burning rate through flame surface wrinkling and turbulent flame speed, respectively.,However, as the filter size decreases, the modeled turbulent flame speed is reduced due to diminished subgrid-scale turbulence, while the increase in resolved flame surface area is insufficient to compensate for this reduction. This imbalance leads to inconsistent burning-rate predictions in LES combustion simulations, particularly in cases involving mesh refinement.,In this study, a turbulent flame speed model is reformulated based on the assumption that the contribution of resolved turbulence approaches an asymptotic limit defined by a reference cell size. The model constants are redefined as functions of the reference cell value, enabling consistent treatment of resolved and modeled turbulence across different resolutions without case-by-case tuning.,The proposed model is first evaluated using a spherical premixed flame configuration to examine flame surface area, turbulent flame speed, and burning-rate consistency. It is then validated in a lean-burn SI engine under practical operating conditions through multi-cycle LES. Simulation results from 40 consecutive cycles are compared with 100 experimental cycles using in-cylinder pressure traces and interquartile range analysis of mass fraction burned. The results demonstrate that the proposed model significantly improves burning-rate consistency and successfully reproduces CCV characteristics under lean-burn conditions.
- 23 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessA Turbulent Flame Speed Model for Consistent Burning Rate Prediction in LES of Lean-Burn Spark-Ignition Engines
Lean-burn spark-ignition (SI) engines are regarded as a promising solution for improving thermal efficiency in next-generation hybrid powertrains; however, their application is limited by increased cycle-to-cycle variation (CCV) caused by unstable early combustion. Large-eddy simulation (LES) is a powerful tool for analyzing CCV because it resolves large-scale turbulence while modeling subgrid-scale effects. In premixed combustion LES, both resolved and modeled turbulence contribute to the burning rate through flame surface wrinkling and turbulent flame speed, respectively.,However, as the filter size decreases, the modeled turbulent flame speed is reduced due to diminished subgrid-scale turbulence, while the increase in resolved flame surface area is insufficient to compensate for this reduction. This imbalance leads to inconsistent burning-rate predictions in LES combustion simulations, particularly in cases involving mesh refinement.,In this study, a turbulent flame speed model is reformulated based on the assumption that the contribution of resolved turbulence approaches an asymptotic limit defined by a reference cell size. The model constants are redefined as functions of the reference cell value, enabling consistent treatment of resolved and modeled turbulence across different resolutions without case-by-case tuning.,The proposed model is first evaluated using a spherical premixed flame configuration to examine flame surface area, turbulent flame speed, and burning-rate consistency. It is then validated in a lean-burn SI engine under practical operating conditions through multi-cycle LES. Simulation results from 40 consecutive cycles are compared with 100 experimental cycles using in-cylinder pressure traces and interquartile range analysis of mass fraction burned. The results demonstrate that the proposed model significantly improves burning-rate consistency and successfully reproduces CCV characteristics under lean-burn conditions.
- Open Access
Tank-to-Wheel Greenhouse Gas Emissions of Methanol–Gasoline Blends: Vehicle Emissions and Fuel-Based Emission Factors
Renewable methanol has attracted increasing attention as an alternative fuel for reducing greenhouse gas (GHG) emissions from transport. However, comprehensive evaluations of tank-to-wheel (TTW) GHG emissions, including CO2, CH4, and N2O, from methanol–gasoline blends across wide blend ratios and vehicle operating conditions remain limited. This study investigated the effects of methanol blending and driving conditions on TTW GHG emissions and compared fuel-property-based CO2 emission factors with vehicle-based GHG emission factors. Two conventional internal combustion engine vehicles and one hybrid electric vehicle were tested with M0–M20 over five driving cycles, with city, highway, and combined emissions evaluated using the 5-cycle method. A flex-fuel vehicle was also tested with M0–M100. For low-level blends, CO2 emissions generally decreased with increasing methanol content; among the statistically significant relationships, the regression-predicted reductions at M20 ranged from 1.9% to 6.2% depending on the vehicle and driving cycle. Using the 5-cycle method, the combined TTW GHG emissions of M20 were 3.5%, 4.1%, and 2.6% lower than those of M0 for Vehicles A, B, and C, respectively, while CH4 and N2O showed no consistent trends. In the flex-fuel vehicle, CO2, CH4, and N2O emissions decreased significantly with increasing methanol content, with predicted reductions at M100 relative to M0 of 8.8%, 64.3%, and 58.5%, respectively. Vehicle-based CO2 emission factors were 0.2–0.5% lower than fuel-property-based values, whereas vehicle-based TTW GHG emission factors were 0.1–0.6% higher when CH4 and N2O were included. These findings highlight the importance of considering fuel properties and actual vehicle emissions when evaluating methanol–gasoline blends.
Open AccessTank-to-Wheel Greenhouse Gas Emissions of Methanol–Gasoline Blends: Vehicle Emissions and Fuel-Based Emission Factors
Renewable methanol has attracted increasing attention as an alternative fuel for reducing greenhouse gas (GHG) emissions from transport. However, comprehensive evaluations of tank-to-wheel (TTW) GHG emissions, including CO2, CH4, and N2O, from methanol–gasoline blends across wide blend ratios and vehicle operating conditions remain limited. This study investigated the effects of methanol blending and driving conditions on TTW GHG emissions and compared fuel-property-based CO2 emission factors with vehicle-based GHG emission factors. Two conventional internal combustion engine vehicles and one hybrid electric vehicle were tested with M0–M20 over five driving cycles, with city, highway, and combined emissions evaluated using the 5-cycle method. A flex-fuel vehicle was also tested with M0–M100. For low-level blends, CO2 emissions generally decreased with increasing methanol content; among the statistically significant relationships, the regression-predicted reductions at M20 ranged from 1.9% to 6.2% depending on the vehicle and driving cycle. Using the 5-cycle method, the combined TTW GHG emissions of M20 were 3.5%, 4.1%, and 2.6% lower than those of M0 for Vehicles A, B, and C, respectively, while CH4 and N2O showed no consistent trends. In the flex-fuel vehicle, CO2, CH4, and N2O emissions decreased significantly with increasing methanol content, with predicted reductions at M100 relative to M0 of 8.8%, 64.3%, and 58.5%, respectively. Vehicle-based CO2 emission factors were 0.2–0.5% lower than fuel-property-based values, whereas vehicle-based TTW GHG emission factors were 0.1–0.6% higher when CH4 and N2O were included. These findings highlight the importance of considering fuel properties and actual vehicle emissions when evaluating methanol–gasoline blends.
- Open Access
- 7 September 2026
- Published by Elsevier in SSRN Electronic Journal
Lower Temperature–Accelerated Degradation of Large-Format High-Ni NMC Pouch Cells Associated with Cathode Oxygen Loss
Temperature-dependent degradation of Ni-rich lithium-ion batteries is commonly attributed to high-temperature cathode degradation or low-temperature lithium plating. However, behavior at moderate temperatures in commercial-format cells remains poorly understood because most previous studies have focused on temperature extremes or small-format cells. Herein, 58.3-Ah commercial Ni-rich NMC811/graphite pouch cells were cycled using a 2C–1.5C–1C multistage fast-charging protocol with a full-cell cutoff voltage of 4.15 V at average cell temperatures of 20°C, 29°C, 37°C, and 41°C. Capacity fading accelerated as temperature decreased despite the smaller accessible depth of discharge at lower temperature.,Electrochemical analysis indicated that the severe degradation was associated with increased loss of lithium inventory, loss of negative-electrode active material, and Li-ion transport resistance. Post-mortem microscopy and depth-resolved X-ray photoelectron spectroscopy (XPS) revealed a dense, oxygen-rich inorganic interphase on the anode cycled at 20°C, without persistent morphological evidence of lithium plating or transition metal crossover. On the cathode, X-ray diffraction with Rietveld refinement and O 1s XPS revealed pronounced lattice distortion, structural disorder, and strong oxygen-loss signatures at lower temperatures, without increased bulk Li/Ni cation mixing or a corresponding increase in the Ni²⁺-associated satellite contribution. Li-transport limitations and increased polarization at lower temperatures are therefore proposed to amplify reaction and Li-concentration heterogeneity across the electrode thickness and within individual secondary particles. Local Li-deficient regions may promote TM–O destabilization and oxygen-loss-associated reactions, accelerating electrolyte and LiPF₆ decomposition and the growth of an O-, F-, and P-rich inorganic interphase on the anode.
- 7 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessLower Temperature–Accelerated Degradation of Large-Format High-Ni NMC Pouch Cells Associated with Cathode Oxygen Loss
Temperature-dependent degradation of Ni-rich lithium-ion batteries is commonly attributed to high-temperature cathode degradation or low-temperature lithium plating. However, behavior at moderate temperatures in commercial-format cells remains poorly understood because most previous studies have focused on temperature extremes or small-format cells. Herein, 58.3-Ah commercial Ni-rich NMC811/graphite pouch cells were cycled using a 2C–1.5C–1C multistage fast-charging protocol with a full-cell cutoff voltage of 4.15 V at average cell temperatures of 20°C, 29°C, 37°C, and 41°C. Capacity fading accelerated as temperature decreased despite the smaller accessible depth of discharge at lower temperature.,Electrochemical analysis indicated that the severe degradation was associated with increased loss of lithium inventory, loss of negative-electrode active material, and Li-ion transport resistance. Post-mortem microscopy and depth-resolved X-ray photoelectron spectroscopy (XPS) revealed a dense, oxygen-rich inorganic interphase on the anode cycled at 20°C, without persistent morphological evidence of lithium plating or transition metal crossover. On the cathode, X-ray diffraction with Rietveld refinement and O 1s XPS revealed pronounced lattice distortion, structural disorder, and strong oxygen-loss signatures at lower temperatures, without increased bulk Li/Ni cation mixing or a corresponding increase in the Ni²⁺-associated satellite contribution. Li-transport limitations and increased polarization at lower temperatures are therefore proposed to amplify reaction and Li-concentration heterogeneity across the electrode thickness and within individual secondary particles. Local Li-deficient regions may promote TM–O destabilization and oxygen-loss-associated reactions, accelerating electrolyte and LiPF₆ decomposition and the growth of an O-, F-, and P-rich inorganic interphase on the anode.
- Open Access
- 27 March 2026
- Published by Elsevier in SSRN Electronic Journal
Integrated multiscale modeling and coordinated balance-of-plant optimization to maximize vehicle system efficiency in a heavy-duty fuel cell electric vehicle
This study presents an integrated multiscale modeling and optimization framework for polymer electrolyte membrane fuel cell (PEMFC) systems in a heavy-duty fuel cell electric vehicle (FCEV). The influence of balance-of-plant (BoP) operation on parasitic power consumption and vehicle system efficiency was quantitatively investigated. The integrated model combined the air supply system, thermal management system (TMS), and a quasi-three-dimensional stack model to capture the coupled electrochemical and thermal behavior under realistic operating conditions. The air supply system was validated using component-level experimental data, while the TMS was validated via full-scale chassis dynamometer tests. The model accurately reproduced transient responses, including temperature and pressure, with coefficients of determination (R2) exceeding 0.95. Vehicle-level analysis identified the radiator hydraulic fan pump as the dominant contributor to parasitic losses across the entire operating range. To maximize stack voltage and vehicle system efficiency, the coordinated BoP control parameters were optimized using a Box-Behnken design, Pareto analysis, and response surface methodology under a thermal constraint on the stack coolant outlet temperature. At the maximum stack load of 95 kW, the fan pump consumed 17.18 kW, while the air compressor and coolant pump consumed 12.45 kW and 0.80 kW per stack, respectively. Under the coordinated BoP strategy, the stack voltage and vehicle system efficiency improved by 1.88 and 4.03 %, respectively, demonstrating that coordinated BoP control effectively reduces parasitic losses under high-load conditions. The proposed framework provides a validated foundation for system-level BoP optimization and supports the development of high-efficiency control strategies in commercial heavy-duty FCEVs.
- 27 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessIntegrated multiscale modeling and coordinated balance-of-plant optimization to maximize vehicle system efficiency in a heavy-duty fuel cell electric vehicle
This study presents an integrated multiscale modeling and optimization framework for polymer electrolyte membrane fuel cell (PEMFC) systems in a heavy-duty fuel cell electric vehicle (FCEV). The influence of balance-of-plant (BoP) operation on parasitic power consumption and vehicle system efficiency was quantitatively investigated. The integrated model combined the air supply system, thermal management system (TMS), and a quasi-three-dimensional stack model to capture the coupled electrochemical and thermal behavior under realistic operating conditions. The air supply system was validated using component-level experimental data, while the TMS was validated via full-scale chassis dynamometer tests. The model accurately reproduced transient responses, including temperature and pressure, with coefficients of determination (R2) exceeding 0.95. Vehicle-level analysis identified the radiator hydraulic fan pump as the dominant contributor to parasitic losses across the entire operating range. To maximize stack voltage and vehicle system efficiency, the coordinated BoP control parameters were optimized using a Box-Behnken design, Pareto analysis, and response surface methodology under a thermal constraint on the stack coolant outlet temperature. At the maximum stack load of 95 kW, the fan pump consumed 17.18 kW, while the air compressor and coolant pump consumed 12.45 kW and 0.80 kW per stack, respectively. Under the coordinated BoP strategy, the stack voltage and vehicle system efficiency improved by 1.88 and 4.03 %, respectively, demonstrating that coordinated BoP control effectively reduces parasitic losses under high-load conditions. The proposed framework provides a validated foundation for system-level BoP optimization and supports the development of high-efficiency control strategies in commercial heavy-duty FCEVs.
- Open Access
- 25 March 2026
- Published by Elsevier in SSRN Electronic Journal
Hydration-dependent electrochemical parameters for improved performance modeling of polymer electrolyte membrane fuel cells
Membrane hydration affects not only proton conductivity but also the accessibility of catalytic sites and hydrogen permeation in polymer electrolyte membrane fuel cells (PEMFCs). However, most performance models treat the electrochemical surface area (ECSA) and hydrogen crossover current density as constant parameters, potentially leading to misinterpretation of activation overpotentials under low-humidity operation. In this study, the hydration- and temperature-dependent behaviors of ECSA and hydrogen crossover were quantified for an expanded polytetrafluoroethylene-reinforced membrane electrode assembly. Water vapor sorption was measured by dynamic vapor sorption and analyzed with a new dual-mode sorption model to determine equilibrium hydration states and identify a clustering-related regime transition. In-situ cyclic voltammetry and linear sweep voltammetry were conducted over a wide range of relative humidity and temperature, yielding empirical correlations for ECSA and hydrogen crossover current density with adjusted coefficients of determination (Radj2) exceeding 0.990. Both parameters exhibited a two-regime dependence on hydration, consistent with a clustering-based transition in the membrane water structure. Incorporation of the hydration- and temperature-dependent correlations into a quasi-three-dimensional PEMFC model significantly improved the prediction of activation overpotentials in the low current density regime, reducing the maximum root mean squared error from 14.1 to 7.3 mV under dry conditions. These results support the need to include hydration- and temperature-dependent electrochemical parameters for reliable PEMFC performance prediction under low-humidity operation.
- 25 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessHydration-dependent electrochemical parameters for improved performance modeling of polymer electrolyte membrane fuel cells
Membrane hydration affects not only proton conductivity but also the accessibility of catalytic sites and hydrogen permeation in polymer electrolyte membrane fuel cells (PEMFCs). However, most performance models treat the electrochemical surface area (ECSA) and hydrogen crossover current density as constant parameters, potentially leading to misinterpretation of activation overpotentials under low-humidity operation. In this study, the hydration- and temperature-dependent behaviors of ECSA and hydrogen crossover were quantified for an expanded polytetrafluoroethylene-reinforced membrane electrode assembly. Water vapor sorption was measured by dynamic vapor sorption and analyzed with a new dual-mode sorption model to determine equilibrium hydration states and identify a clustering-related regime transition. In-situ cyclic voltammetry and linear sweep voltammetry were conducted over a wide range of relative humidity and temperature, yielding empirical correlations for ECSA and hydrogen crossover current density with adjusted coefficients of determination (Radj2) exceeding 0.990. Both parameters exhibited a two-regime dependence on hydration, consistent with a clustering-based transition in the membrane water structure. Incorporation of the hydration- and temperature-dependent correlations into a quasi-three-dimensional PEMFC model significantly improved the prediction of activation overpotentials in the low current density regime, reducing the maximum root mean squared error from 14.1 to 7.3 mV under dry conditions. These results support the need to include hydration- and temperature-dependent electrochemical parameters for reliable PEMFC performance prediction under low-humidity operation.
- Open Access
- 22 March 2026
- Published by Elsevier in SSRN Electronic Journal
Integrated multiscale modeling and coordinated balance-of-plant optimization to maximize vehicle system efficiency in a heavy-duty fuel cell electric vehicle
This study presents an integrated multiscale modeling and optimization framework for polymer electrolyte membrane fuel cell (PEMFC) systems in a heavy-duty fuel cell electric vehicle (FCEV). The influence of balance-of-plant (BoP) operation on parasitic power consumption and vehicle system efficiency was quantitatively investigated. The integrated model combined the air supply system, thermal management system (TMS), and a quasi-three-dimensional stack model to capture the coupled electrochemical and thermal behavior under realistic operating conditions. The air supply system was validated using component-level experimental data, while the TMS was validated via full-scale chassis dynamometer tests. The model accurately reproduced transient responses, including temperature and pressure, with coefficients of determination (R2) exceeding 0.95. Vehicle-level analysis identified the radiator hydraulic fan pump as the dominant contributor to parasitic losses across the entire operating range. To maximize stack voltage and vehicle system efficiency, the coordinated BoP control parameters were optimized using a Box-Behnken design, Pareto analysis, and response surface methodology under a thermal constraint on the stack coolant outlet temperature. At the maximum stack load of 95 kW, the fan pump consumed 17.18 kW, while the air compressor and coolant pump consumed 12.45 kW and 0.80 kW per stack, respectively. Under the coordinated BoP strategy, the stack voltage and vehicle system efficiency improved by 1.88 and 4.03 %, respectively, demonstrating that coordinated BoP control effectively reduces parasitic losses under high-load conditions. The proposed framework provides a validated foundation for system-level BoP optimization and supports the development of high-efficiency control strategies in commercial heavy-duty FCEVs.
- 22 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessIntegrated multiscale modeling and coordinated balance-of-plant optimization to maximize vehicle system efficiency in a heavy-duty fuel cell electric vehicle
This study presents an integrated multiscale modeling and optimization framework for polymer electrolyte membrane fuel cell (PEMFC) systems in a heavy-duty fuel cell electric vehicle (FCEV). The influence of balance-of-plant (BoP) operation on parasitic power consumption and vehicle system efficiency was quantitatively investigated. The integrated model combined the air supply system, thermal management system (TMS), and a quasi-three-dimensional stack model to capture the coupled electrochemical and thermal behavior under realistic operating conditions. The air supply system was validated using component-level experimental data, while the TMS was validated via full-scale chassis dynamometer tests. The model accurately reproduced transient responses, including temperature and pressure, with coefficients of determination (R2) exceeding 0.95. Vehicle-level analysis identified the radiator hydraulic fan pump as the dominant contributor to parasitic losses across the entire operating range. To maximize stack voltage and vehicle system efficiency, the coordinated BoP control parameters were optimized using a Box-Behnken design, Pareto analysis, and response surface methodology under a thermal constraint on the stack coolant outlet temperature. At the maximum stack load of 95 kW, the fan pump consumed 17.18 kW, while the air compressor and coolant pump consumed 12.45 kW and 0.80 kW per stack, respectively. Under the coordinated BoP strategy, the stack voltage and vehicle system efficiency improved by 1.88 and 4.03 %, respectively, demonstrating that coordinated BoP control effectively reduces parasitic losses under high-load conditions. The proposed framework provides a validated foundation for system-level BoP optimization and supports the development of high-efficiency control strategies in commercial heavy-duty FCEVs.
- Open Access
- 26 February 2026
- Published by Elsevier in SSRN Electronic Journal
A novel approach to modeling of polymer electrolyte membrane fuel cells with vehicle-level validation in a hydrogen electric vehicle
This study presents a novel modeling approach for polymer electrolyte membrane fuel cells (PEMFCs), validated at both the single-cell and stack levels in a hydrogen electric vehicle. An extensive single-cell experiment was conducted to investigate the impacts of operating conditions (i.e., temperature, relative humidity, and pressure), leading to the development of a detailed PEMFC model incorporating newly derived water transport properties of a reinforced composite membrane (RCM). Unlike conventional models (CM) based on Nafion correlations, the RCM model successfully reproduced the distinct transport characteristics of the reinforced membrane. As a result, predictive accuracy was markedly enhanced, with the maximum root mean square error (RMSE) reduced from 41.0 mV (CM) to 6.3 mV (RCM). The model achieved an adjusted coefficient of determination (Radj2) of 0.988 and a maximum relative error below 2.01 %. Additionally, the model enabled analysis of through-plane distributions of temperature and water concentration (vapor and liquid), highlighting the saturation factor in the serpentine flow field configuration. At the stack level, chassis dynamometer tests under dynamic loads validated the model, with correction factors applied to account for flow channel differences. With these refinements, the stack model achieved an Radj2 of 0.994 and a maximum relative error below 3.15 %. This study bridges the gap between single-cell and stack-scale operation by integrating electrochemical and water transport effects into a scalable framework, providing a robust tool for predicting PEMFC performance under dynamic conditions.
- 26 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessA novel approach to modeling of polymer electrolyte membrane fuel cells with vehicle-level validation in a hydrogen electric vehicle
This study presents a novel modeling approach for polymer electrolyte membrane fuel cells (PEMFCs), validated at both the single-cell and stack levels in a hydrogen electric vehicle. An extensive single-cell experiment was conducted to investigate the impacts of operating conditions (i.e., temperature, relative humidity, and pressure), leading to the development of a detailed PEMFC model incorporating newly derived water transport properties of a reinforced composite membrane (RCM). Unlike conventional models (CM) based on Nafion correlations, the RCM model successfully reproduced the distinct transport characteristics of the reinforced membrane. As a result, predictive accuracy was markedly enhanced, with the maximum root mean square error (RMSE) reduced from 41.0 mV (CM) to 6.3 mV (RCM). The model achieved an adjusted coefficient of determination (Radj2) of 0.988 and a maximum relative error below 2.01 %. Additionally, the model enabled analysis of through-plane distributions of temperature and water concentration (vapor and liquid), highlighting the saturation factor in the serpentine flow field configuration. At the stack level, chassis dynamometer tests under dynamic loads validated the model, with correction factors applied to account for flow channel differences. With these refinements, the stack model achieved an Radj2 of 0.994 and a maximum relative error below 3.15 %. This study bridges the gap between single-cell and stack-scale operation by integrating electrochemical and water transport effects into a scalable framework, providing a robust tool for predicting PEMFC performance under dynamic conditions.
- Open Access
- 16 February 2026
- Published by Elsevier in SSRN Electronic Journal
Curl Turbulent Kinetic Energy as a Flame-Surface-Related Indicator for Cycle-to-Cycle Variation in LES of Lean-Burn Spark-Ignition Engines
As the automotive industry transitions toward electrification, the role of internal combustion engines has been increasingly questioned. However, life cycle analyses indicate that hybrid powertrains can significantly reduce carbon emissions by 2030 through improved efficiency and optimized driving strategies, resulting in carbon footprints comparable to those of current battery electric vehicles. To further enhance thermal efficiency, next-generation hybrid engines are expected to operate under low-temperature combustion conditions by exploiting lean-burn operation within a narrow “sweet spot.” Because hybrid systems can actively maintain engine operation within this regime using motor assistance, efficiency gains in the sweet spot become particularly effective.,Lean-burn combustion, however, is inherently limited by increased cycle-to-cycle variation (CCV) caused by poor initial ignition stability. Although strategies such as enhanced spark energy and strengthened tumble motion have been proposed to mitigate this issue, a fundamental understanding of the flow and turbulence parameters governing CCV remains essential. Large-eddy simulation (LES) is a powerful tool for this purpose, as it enables multicycle analysis while resolving large-scale turbulent structures and modeling subgrid-scale (SGS) turbulence. Both resolved and SGS eddies influence the combustion process: resolved eddies deform the flame front and increase flame surface area, whereas SGS eddies affect the turbulent flame speed through flame surface density.,In this study, the limitations of resolved turbulent kinetic energy (TKE) as an indicator of combustion enhancement in LES are identified. To address these limitations, a new turbulence metric, termed Curl TKE, is proposed. Curl TKE represents the smallest resolved eddy energy directly associated with flame surface stretching and is inherently zero in ensemble-averaged and RANS fields. The relationship between Curl TKE and SGS TKE is shown to be consistent with the turbulence energy cascade. Furthermore, multicycle LES combustion analysis under lean-burn conditions demonstrates that cycles with higher Curl TKE exhibit increased flame front area and accelerated burning rates. These results indicate that Curl TKE provides a physically meaningful and quantitatively relevant indicator for linking resolved turbulence to combustion variability in lean-burn spark-ignition engines.
- 16 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessCurl Turbulent Kinetic Energy as a Flame-Surface-Related Indicator for Cycle-to-Cycle Variation in LES of Lean-Burn Spark-Ignition Engines
As the automotive industry transitions toward electrification, the role of internal combustion engines has been increasingly questioned. However, life cycle analyses indicate that hybrid powertrains can significantly reduce carbon emissions by 2030 through improved efficiency and optimized driving strategies, resulting in carbon footprints comparable to those of current battery electric vehicles. To further enhance thermal efficiency, next-generation hybrid engines are expected to operate under low-temperature combustion conditions by exploiting lean-burn operation within a narrow “sweet spot.” Because hybrid systems can actively maintain engine operation within this regime using motor assistance, efficiency gains in the sweet spot become particularly effective.,Lean-burn combustion, however, is inherently limited by increased cycle-to-cycle variation (CCV) caused by poor initial ignition stability. Although strategies such as enhanced spark energy and strengthened tumble motion have been proposed to mitigate this issue, a fundamental understanding of the flow and turbulence parameters governing CCV remains essential. Large-eddy simulation (LES) is a powerful tool for this purpose, as it enables multicycle analysis while resolving large-scale turbulent structures and modeling subgrid-scale (SGS) turbulence. Both resolved and SGS eddies influence the combustion process: resolved eddies deform the flame front and increase flame surface area, whereas SGS eddies affect the turbulent flame speed through flame surface density.,In this study, the limitations of resolved turbulent kinetic energy (TKE) as an indicator of combustion enhancement in LES are identified. To address these limitations, a new turbulence metric, termed Curl TKE, is proposed. Curl TKE represents the smallest resolved eddy energy directly associated with flame surface stretching and is inherently zero in ensemble-averaged and RANS fields. The relationship between Curl TKE and SGS TKE is shown to be consistent with the turbulence energy cascade. Furthermore, multicycle LES combustion analysis under lean-burn conditions demonstrates that cycles with higher Curl TKE exhibit increased flame front area and accelerated burning rates. These results indicate that Curl TKE provides a physically meaningful and quantitatively relevant indicator for linking resolved turbulence to combustion variability in lean-burn spark-ignition engines.
- Open Access
Particle number and size distribution in hybrid electric vehicles using Low-Level Methanol–Gasoline blends