Hydration-dependent electrochemical parameters for improved performance modeling of polymer electrolyte membrane fuel cells
Authors:
- Sehyeon KimSKSehyeon Kim
- Jiwoong KimJKJiwoong Kim
- Hyunsoo ChunHCHyunsoo Chun
- Junghyo ChangJCJunghyo Chang
- Jihun ShinJSJihun Shin
- Sanggyu KangSKSanggyu Kang
- Kyoungdoug MinKMKyoungdoug Min
Preprint
- 25 March 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
Membrane hydration affects not only proton conductivity but also the accessibility of catalytic sites and hydrogen permeation in polymer electrolyte membrane fuel cells (PEMFCs). However, most performance models treat the electrochemical surface area (ECSA) and hydrogen crossover current density as constant parameters, potentially leading to misinterpretation of activation overpotentials under low-humidity operation. In this study, the hydration- and temperature-dependent behaviors of ECSA and hydrogen crossover were quantified for an expanded polytetrafluoroethylene-reinforced membrane electrode assembly. Water vapor sorption was measured by dynamic vapor sorption and analyzed with a new dual-mode sorption model to determine equilibrium hydration states and identify a clustering-related regime transition. In-situ cyclic voltammetry and linear sweep voltammetry were conducted over a wide range of relative humidity and temperature, yielding empirical correlations for ECSA and hydrogen crossover current density with adjusted coefficients of determination (Radj2) exceeding 0.990. Both parameters exhibited a two-regime dependence on hydration, consistent with a clustering-based transition in the membrane water structure. Incorporation of the hydration- and temperature-dependent correlations into a quasi-three-dimensional PEMFC model significantly improved the prediction of activation overpotentials in the low current density regime, reducing the maximum root mean squared error from 14.1 to 7.3 mV under dry conditions. These results support the need to include hydration- and temperature-dependent electrochemical parameters for reliable PEMFC performance prediction under low-humidity operation.Keywords
This publication has 38 references indexed in Scilit:
- SulfoMg organophyllosilicate − infused nafion membranes: overcoming hydration and stability challenges in HT-PEMFCsChemical Engineering Journal, 2025
- Polynorepinephrine-regulated filler sulfonation toward interfacial reformation and conductive promotion of nanocomposite proton exchange membraneChemical Engineering Journal, 2024
- Experimental investigation and decoupling of voltage losses distribution in proton exchange membrane fuel cells with a large active areaChemical Engineering Journal, 2022
- Pore-scale study of effects of relative humidity on reactive transport processes in catalyst layers in PEMFCApplied Energy, 2022
- A unified catalyst layer design classification criterion on proton exchange membrane fuel cell performance based on a modified agglomerate modelChemical Engineering Journal, 2022
- Combining proton and anion exchange membrane fuel cells for enhancing the overall performance and self-humidificationChemical Engineering Journal, 2022
- Modeling of PEM fuel cell with thin MEA under low humidity operating conditionApplied Energy, 2019
- Diagnosis of water failures in proton exchange membrane fuel cell with zero-phase ohmic resistance and fixed-low-frequency impedanceApplied Energy, 2019
- An experimental study on the hydrogen crossover in polymer electrolyte membrane fuel cells for various current densitiesApplied Energy, 2016
- A review of recent development: Transport and performance modeling of PEM fuel cellsApplied Energy, 2016