Hualiang Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hualiang Zhang has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Haisheng Chen
Institute of Engineering Thermophysics, Chinese Academy of Sciences
6 shared publications Yujie Xu
5 shared publications- Zhao Yin
Institute of Engineering Thermophysics
4 shared publications Haisheng Chen
3 shared publicationsYu Liu
3 shared publicationsHongtao Tang
Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, PR China
2 shared publications
Latest Publications
- 20 July 2026
- Published by Elsevier in Aerospace Science and Technology
- Vol. 179
Thermodynamic performance and exergy destruction of an NH3-fueled SOFC-GT system for green energy applications
- 20 July 2026
- Published by Elsevier in Aerospace Science and Technology
- Vol. 179
Thermodynamic performance and exergy destruction of an NH3-fueled SOFC-GT system for green energy applications
- 13 May 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 240 (14) , 2033-2048
Experimental and numerical study on the impact of shock wave intensity on film cooling
In transonic high-load turbines, interactions between trailing-edge shock waves and suction-side film cooling can severely compromise thermal protection and may even lead to localized cooling failure. To investigate the underlying mechanisms and critical effects associated with shock intensity, combined experimental and numerical studies are conducted at an inlet Mach number of 1.45. Weak to moderate shock interference is found to primarily accelerate the vorticity dissipation of the coolant-jet-induced counter-rotating vortex pair (CRVP). As shock intensity further increases, a normal shock forms above the interaction region and, under strong baroclinic effects, induces a sustained reversal of the CRVP, thereby leading to a rapid deterioration of film cooling effectiveness within the shock wave-film interaction region. To quantitatively characterize the severity of SWFI, a wall-pressure-based shock wave interaction intensity parameter (φ) is introduced. When φ exceeds 0.30, film cooling performance is observed to enter a markedly degraded regime. Entropy generation analysis demonstrates that viscous dissipation is the primary source of the entropy generation rate (EGR). Within the SWFI region, more than 70% of the total EGR originates from the coolant–mainstream shear layer, while direct shock-induced compression contributes negligibly.
- 13 May 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 240 (14) , 2033-2048
Experimental and numerical study on the impact of shock wave intensity on film cooling
In transonic high-load turbines, interactions between trailing-edge shock waves and suction-side film cooling can severely compromise thermal protection and may even lead to localized cooling failure. To investigate the underlying mechanisms and critical effects associated with shock intensity, combined experimental and numerical studies are conducted at an inlet Mach number of 1.45. Weak to moderate shock interference is found to primarily accelerate the vorticity dissipation of the coolant-jet-induced counter-rotating vortex pair (CRVP). As shock intensity further increases, a normal shock forms above the interaction region and, under strong baroclinic effects, induces a sustained reversal of the CRVP, thereby leading to a rapid deterioration of film cooling effectiveness within the shock wave-film interaction region. To quantitatively characterize the severity of SWFI, a wall-pressure-based shock wave interaction intensity parameter (φ) is introduced. When φ exceeds 0.30, film cooling performance is observed to enter a markedly degraded regime. Entropy generation analysis demonstrates that viscous dissipation is the primary source of the entropy generation rate (EGR). Within the SWFI region, more than 70% of the total EGR originates from the coolant–mainstream shear layer, while direct shock-induced compression contributes negligibly.
- 25 November 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
- Vol. 239 (1) , 34-45
Investigating endwall flow mechanisms and improving the loss model under diverse operating conditions
Accurate prediction and comprehension of off-design turbine performance hold paramount importance in the development of highly efficient turbines capable of operating across a diverse range of conditions. This research concentrates on a highly loaded turbine cascade endwall flow and endeavors to scrutinize the impact of both incidence angle and inlet free stream turbulence intensity (FSTI). The investigation involves a meticulous analysis leading to substantial improvements in the existing endwall loss model (the Benner model correlated with the Moustapha incidence loss correction model), tailored for off-design scenarios. The findings underscore the pronounced influence of both incidence angle and FSTI on the dynamics of the endwall flow. Notably, alterations in the incidence angle have been identified as exerting a discernible impact on the flow structure, particularly when encountering large positive incidence angles. At an incidence angle of +20°, a distinctive vortex known as the Concentrated Shedding Vortex emerges as a pivotal factor in shaping the endwall flow structure, resulting in a substantial escalation in endwall losses. Furthermore, variations in FSTI predominantly affect the intensity of secondary vortices, thereby influencing endwall loss. Leveraging these discernments, an expressive formulation for endwall loss is derived by refining the higher-order terms of the incidence loss correction model and introducing a corrective term associated with FSTI. It has been validated that the proposed model controls the prediction error of endwall loss within a margin of ±0.02.
- 25 November 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
- Vol. 239 (1) , 34-45
Investigating endwall flow mechanisms and improving the loss model under diverse operating conditions
Accurate prediction and comprehension of off-design turbine performance hold paramount importance in the development of highly efficient turbines capable of operating across a diverse range of conditions. This research concentrates on a highly loaded turbine cascade endwall flow and endeavors to scrutinize the impact of both incidence angle and inlet free stream turbulence intensity (FSTI). The investigation involves a meticulous analysis leading to substantial improvements in the existing endwall loss model (the Benner model correlated with the Moustapha incidence loss correction model), tailored for off-design scenarios. The findings underscore the pronounced influence of both incidence angle and FSTI on the dynamics of the endwall flow. Notably, alterations in the incidence angle have been identified as exerting a discernible impact on the flow structure, particularly when encountering large positive incidence angles. At an incidence angle of +20°, a distinctive vortex known as the Concentrated Shedding Vortex emerges as a pivotal factor in shaping the endwall flow structure, resulting in a substantial escalation in endwall losses. Furthermore, variations in FSTI predominantly affect the intensity of secondary vortices, thereby influencing endwall loss. Leveraging these discernments, an expressive formulation for endwall loss is derived by refining the higher-order terms of the incidence loss correction model and introducing a corrective term associated with FSTI. It has been validated that the proposed model controls the prediction error of endwall loss within a margin of ±0.02.
- 10 September 2024
- Published by Wiley in Journal of Turbomachinery
- Vol. 147 (2) , 1-43
Understanding Unsteady Vortex Structure and Shedding Frequency of Cylindrical Hole Film Cooling: Insights From Experimental and Numerical Approaches
To enhance film cooling effectiveness and reduce mixing loss, it is imperative to understand the dynamics of the unsteady vortex system and its interaction with the mainstream flow. In this study, a comprehensive experimental investigation was conducted to assess the film cooling effectiveness of a flat-plate cylindrical hole, along with the structure of the vortex system and the frequency of vortex shedding. This was achieved using a variety of techniques including pressure-sensitive paint (PSP), particle image velocimetry (PIV), hot-wire anemometry, and dynamic pressure sensors. To complement the experimental findings, a detailed analysis of the evolution mechanisms of unsteady coherent vortices was performed using the detached eddy simulation (DES) numerical method. The findings of the study revealed that the Kelvin–Helmholtz (K–H) shear vortex patterns on the windward side undergo a transition from clockwise to counterclockwise rotation with increasing blowing ratios. Large-scale vortex sheds from the K–H shear vortices, ultimately evolving into the hairpin vortex in the downstream region. Additionally, the study proposed two evolution models for the vortex systems in the film cooling flow field at different blowing ratios and elucidated the evolution mechanisms of counter-rotating vortex pair (CRVP). The results of the spectral analysis revealed a notable discrepancy in the slopes of the eigenfrequencies, which could be attributed to variations in the evolution patterns of the vortex systems.
- 10 September 2024
- Published by Wiley in Journal of Turbomachinery
- Vol. 147 (2) , 1-43
Understanding Unsteady Vortex Structure and Shedding Frequency of Cylindrical Hole Film Cooling: Insights From Experimental and Numerical Approaches
To enhance film cooling effectiveness and reduce mixing loss, it is imperative to understand the dynamics of the unsteady vortex system and its interaction with the mainstream flow. In this study, a comprehensive experimental investigation was conducted to assess the film cooling effectiveness of a flat-plate cylindrical hole, along with the structure of the vortex system and the frequency of vortex shedding. This was achieved using a variety of techniques including pressure-sensitive paint (PSP), particle image velocimetry (PIV), hot-wire anemometry, and dynamic pressure sensors. To complement the experimental findings, a detailed analysis of the evolution mechanisms of unsteady coherent vortices was performed using the detached eddy simulation (DES) numerical method. The findings of the study revealed that the Kelvin–Helmholtz (K–H) shear vortex patterns on the windward side undergo a transition from clockwise to counterclockwise rotation with increasing blowing ratios. Large-scale vortex sheds from the K–H shear vortices, ultimately evolving into the hairpin vortex in the downstream region. Additionally, the study proposed two evolution models for the vortex systems in the film cooling flow field at different blowing ratios and elucidated the evolution mechanisms of counter-rotating vortex pair (CRVP). The results of the spectral analysis revealed a notable discrepancy in the slopes of the eigenfrequencies, which could be attributed to variations in the evolution patterns of the vortex systems.
- Open Access
Review of Coupling Methods of Compressed Air Energy Storage Systems and Renewable Energy Resources
With the strong advancement of the global carbon reduction strategy and the rapid development of renewable energy, compressed air energy storage (CAES) technology has received more and more attention for its key role in large-scale renewable energy access. This paper summarizes the coupling systems of CAES and wind, solar, and biomass energies from the perspective of system topology, and points out the advantages and limitations of each system. It is shown that the coupling of wind energy and CAES is mainly combined in series and in parallel, and sometimes part of the wind power can be converted into thermal energy when coupled to CAES. The coupling between solar heat and CAES is an important form of coupling between solar energy and CAES. Solar-heat-coupled CAES mainly uses solar energy to heat expander inlet air. The coupling forms of solar energy and CAES are based on various CAES forms, various heat heating sequences, reheating, bottom cycle, and other factors. The combination of biomass and CAES is generally based on biomass gasification power generation technology. In the future, a wind–solar–CAES multiple coupling system is expected to become a promising large-scale form for the utilization of renewable energy, and this integrated system has great potential as a system configuration, but has some technical challenges.
Open AccessReview of Coupling Methods of Compressed Air Energy Storage Systems and Renewable Energy Resources
With the strong advancement of the global carbon reduction strategy and the rapid development of renewable energy, compressed air energy storage (CAES) technology has received more and more attention for its key role in large-scale renewable energy access. This paper summarizes the coupling systems of CAES and wind, solar, and biomass energies from the perspective of system topology, and points out the advantages and limitations of each system. It is shown that the coupling of wind energy and CAES is mainly combined in series and in parallel, and sometimes part of the wind power can be converted into thermal energy when coupled to CAES. The coupling between solar heat and CAES is an important form of coupling between solar energy and CAES. Solar-heat-coupled CAES mainly uses solar energy to heat expander inlet air. The coupling forms of solar energy and CAES are based on various CAES forms, various heat heating sequences, reheating, bottom cycle, and other factors. The combination of biomass and CAES is generally based on biomass gasification power generation technology. In the future, a wind–solar–CAES multiple coupling system is expected to become a promising large-scale form for the utilization of renewable energy, and this integrated system has great potential as a system configuration, but has some technical challenges.
- 22 December 2022
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 237 (12) , 2696-2713
Adaptive prediction of turbine profile loss and multi-objective optimization in a wide incidence range
The loss prediction model plays a crucial role in turbine design for fast performance prediction and a shorter design cycle. Owing to the design requirements of high-efficiency turbines under a wide range of operating conditions, the loss prediction of the off-design incidence is increasingly important. However, limited by the modeling database and traditional modeling methods, the accuracy and adaptability of the existing off-design incidence loss predictions are insufficient. This paper proposes an adaptive prediction method based on machine learning and develops a multi-objective optimization process based on adaptive prediction. Machine learning (neural network) is applied for more flexible and accurate loss predictions over a wide incidence range. Compared with two classic loss models (Ainley and Mathieson model and Benner model), the adaptive prediction model significantly improves the ability to predict turbine profile loss with off-design incidence, particularly under large incidence conditions. The prediction root mean square error can be reduced by up to 73.8% (absolute value: 0.063). Furthermore, the multi-objective optimization method based on adaptive prediction is applied to the aerodynamic optimization of the original cascades with a wide incidence range. The weighted objective of the optimized cascade (Cri = 0.211) is reduced by 8.7% compared with that of the original cascade (Cri = 0.231). Within the range of full incidence angle (−40° to +20°), the variation of profile loss is reduced by 24.0%. This study is a preliminary exploration aimed at establishing an accurate turbine loss prediction system based on machine learning, the feasibility, and superiority of this approach are confirmed.
- 22 December 2022
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 237 (12) , 2696-2713
Adaptive prediction of turbine profile loss and multi-objective optimization in a wide incidence range
The loss prediction model plays a crucial role in turbine design for fast performance prediction and a shorter design cycle. Owing to the design requirements of high-efficiency turbines under a wide range of operating conditions, the loss prediction of the off-design incidence is increasingly important. However, limited by the modeling database and traditional modeling methods, the accuracy and adaptability of the existing off-design incidence loss predictions are insufficient. This paper proposes an adaptive prediction method based on machine learning and develops a multi-objective optimization process based on adaptive prediction. Machine learning (neural network) is applied for more flexible and accurate loss predictions over a wide incidence range. Compared with two classic loss models (Ainley and Mathieson model and Benner model), the adaptive prediction model significantly improves the ability to predict turbine profile loss with off-design incidence, particularly under large incidence conditions. The prediction root mean square error can be reduced by up to 73.8% (absolute value: 0.063). Furthermore, the multi-objective optimization method based on adaptive prediction is applied to the aerodynamic optimization of the original cascades with a wide incidence range. The weighted objective of the optimized cascade (Cri = 0.211) is reduced by 8.7% compared with that of the original cascade (Cri = 0.231). Within the range of full incidence angle (−40° to +20°), the variation of profile loss is reduced by 24.0%. This study is a preliminary exploration aimed at establishing an accurate turbine loss prediction system based on machine learning, the feasibility, and superiority of this approach are confirmed.
- Open Access
- 16 July 2021
- Published by ASME International
A Feature Weighted Kernel Extreme Learning Machine Ensemble Method for Gas Turbine Fault Diagnosis
Gas turbine is very popular in aviation, power system and many other fields due to its large power density, short loading time, low frequency noise, and favorable emission performance. Gas turbine usually works in high velocity, high temperature and high pressure environment, which is susceptible to corrosion, erosion, and foreign object damage as well as other physical problems.
- 16 July 2021
- Published by ASME International
Open AccessA Feature Weighted Kernel Extreme Learning Machine Ensemble Method for Gas Turbine Fault Diagnosis
Gas turbine is very popular in aviation, power system and many other fields due to its large power density, short loading time, low frequency noise, and favorable emission performance. Gas turbine usually works in high velocity, high temperature and high pressure environment, which is susceptible to corrosion, erosion, and foreign object damage as well as other physical problems.
- 15 May 2009
- Published by Springer Nature in Science China Technological Sciences
- Vol. 52 (6) , 1471-1477
Flow separation control by using bowed blade in highly loaded turbine cascades
- 15 May 2009
- Published by Springer Nature in Science China Technological Sciences
- Vol. 52 (6) , 1471-1477
Flow separation control by using bowed blade in highly loaded turbine cascades