Bhuvenesh Rajamony
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bhuvenesh Rajamony has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
B. Abdulnasser
1,2 (School of Manufacturing Engineering, University Malaysia Perlis, Kampus Tetap Ulu Pauh, Jalan Arau –Changlun, 02600 Arau, Perlis, Malaysia )
1 shared publication- Thong Sze Yee
Universiti Malaysia Perlis (UniMAP)
1 shared publication - Zuraidah Bt. Mohd Zain
School of Manufacturing Engineering, University Malaysia Perlis, Pauh Putra Campus, 02600 Arau, Perlis, Malaysia
1 shared publication
Latest Publications
- 1 January 2016
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1756 (1) , 060002
Plasma arc cutting optimization parameters for aluminum alloy with two thickness by using Taguchi method
Manufacturing companies define the qualities of thermal removing process based on the dimension and physical appearance of the cutting material surface. The surface roughness of the cutting area for the material and the material removal rate being removed during the manual plasma arc cutting process were importantly considered. Plasma arc cutter machine model PS-100 was used to cut the specimens made from aluminium alloy 1100 manually based on the selected parameters setting. Two different thicknesses of specimens, 3mm and 6mm were used. The material removal rate (MRR) was measured by determining the difference between the weight of specimens before and after the cutting process. The surface roughness (Ra) was measured by using MITUTOYO CS-3100 machine and analysis was conducted to determine the average roughness (Ra) value, Taguchi method was utilized as an experimental layout to obtain MRR and Ra values. The results indicate that the current and cutting speed is the most significant parameters, followed by the arc gap for both rate of material removal and surface roughness.
- 1 January 2016
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1756 (1) , 060002
Plasma arc cutting optimization parameters for aluminum alloy with two thickness by using Taguchi method
Manufacturing companies define the qualities of thermal removing process based on the dimension and physical appearance of the cutting material surface. The surface roughness of the cutting area for the material and the material removal rate being removed during the manual plasma arc cutting process were importantly considered. Plasma arc cutter machine model PS-100 was used to cut the specimens made from aluminium alloy 1100 manually based on the selected parameters setting. Two different thicknesses of specimens, 3mm and 6mm were used. The material removal rate (MRR) was measured by determining the difference between the weight of specimens before and after the cutting process. The surface roughness (Ra) was measured by using MITUTOYO CS-3100 machine and analysis was conducted to determine the average roughness (Ra) value, Taguchi method was utilized as an experimental layout to obtain MRR and Ra values. The results indicate that the current and cutting speed is the most significant parameters, followed by the arc gap for both rate of material removal and surface roughness.
- 20 January 2015
- Published by Atlantis Press SARL
- p. 275-282
Non Production Direct Workforce Work Measurement Challenges and Case Study
- 20 January 2015
- Published by Atlantis Press SARL
- p. 275-282
Non Production Direct Workforce Work Measurement Challenges and Case Study