PPPisut Painmanakul

Pisut Painmanakul

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pisut Painmanakul has a total of 51 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Integrating circular economy in food waste management: insights from Thailand’s shopping mall and community

    by Pavinee Pongpunpurt, Nattawin Chawaloesphonsiya, Rapeeporn Rungsithong, Ligia Tiruta-Barna, Unruan Leknoi, Pisut Painmanakul, Dao Janjaroen, Thaksina Poyai

    This study introduces circular food waste management strategies that promote collaboration between large enterprises and community-based sectors. Thermal dehydration and anaerobic digestion were implemented as treatment technologies in a shopping mall and a local community, respectively. Thermally treated food waste from the shopping mall showed an average moisture content of 1.86% with 49.3% carbohydrates, 21.0% protein, 12.9% fat, 7.0% fiber, 8.7% ash, and a carbon-to-nitrogen (C/N) ratio of 10.4. This dried organic material can be directly used as a soil amendment or supplied to communities as a cosubstrate for anaerobic digestion to improve digestate quality. Community food waste, with a moisture content of 75.6% and a C/N ratio of 12, was anaerobically digested to produce a nutrient-rich digestate (nitrogen = 2.38%, phosphorus = 6.01%, potassium = 0.6%, and C/N ratio = 15.6) that meets Thailand’s fertilizer standards. The generated biogas, containing 41.1% methane and 32.7% carbon dioxide, is suitable for use as cooking fuel. Thermal dehydration exhibited strong economic feasibility in the shopping mall (SROI = 1.34), whereas anaerobic digestion yielded moderate social returns under the current operational scale (SROI = 0.59). Integrating these two technologies establishes a circular business model that can be successfully scaled through government support in training, product certification, market development, export facilitation, and infrastructure investment. The findings provide practical insights into addressing food waste challenges in Thailand while strengthening public–private partnerships and advancing SDG12 in alignment with circular economy principles.


  • Open Access

    Study the effects of flotation agents on ABS – PS flotation

    by Pattarasiri Fagkaew, Nattawin Chawaloesphonsiya, Pisut Painmanakul

    The use of appropriate flotation agents is mandatory to effectively separate plastic mixtures with analogous physicochemical characteristics by flotation. In this study, both virgin and post-consumer ABS and PS plastics were chosen as research objects to investigate the effects of flotation agents in ABS – PS flotation and an appropriate condition was then identified for effective separation. The wetting behaviors of wetting agents on ABS and PS surfaces were further studied. As a result, TA demonstrated better selective performance than LS in ABS – PS flotation due to its selective wettability on the ABS surface, referring to a greater surface free energy and a stronger repulsive interfacial interaction. Additionally, laureth-5 was found to be used potentially as a frother in ABS – PS flotation as well as MIBC; however, its application was limited at high concentrations due to its tendency to rapidly reduce surface tension. These findings suggest that the selection of a suitable frother for ABS – PS flotation should not only consider the ability to produce fine bubbles and stabilize the froth but also the ability to reduce the surface tension of the liquid medium. Overall, high recovery and purity of both virgin and post-consumer ABS – PS flotation were achieved by more than 90% under the conditions of TA concentration of 5 mg/L, MIBC concentration of 5 mg/L, and conditioning time of 15 minutes.

  • Open Access

    Effect of catalyst and irradiation characteristics on volatile organic compounds degradation in aqueous phase using TiO2 photocatalyst

    by Phaly Ham, Saret Bun, Kritchart Wongwailikhit, Pisut Painmanakul

    Titanium dioxide (TiO2) has been regarded as the most suitable photocatalyst due to its cost-effectiveness, high stability, and great potential to degrade various volatile organic compounds (VOCs). However, there is a knowledge limitation through the characteristics of TiO2-based photocatalysts for practical application in the aqueous phase as well as its suitable irradiation source. Therefore, the present work aims to investigate the relative effect of various irradiation sources and TiO2 catalysts types for VOCs degradation in an aqueous solution for optimization purposes. The experiment was conducted in a cylindrical photocatalytic oxidation column (PCO) with a 6-cm diameter to carry a 650 mL volume of VOC (benzene) solution. For irradiation investigation, lamp types (visible, UVA, VUV, and UVC) and lamp power (6 – 15 W) were investigated, under 1 g of TiO2 commercial powder. Moreover, types of TiO2 catalyst (commercial powder, coating on ring-shaped plastic media at different TiO2 percentage by mass: 1% (1TPcB), 3% (3TPcB), and 5% (5TPcB), and coating 5% by mass on alumina ball) were studied at the identical mass usage of TiO2. To identify the optimum dose, the different volume loading (5% – 20% v/v) of selective catalyst type was examined. The result indicated that the UVC lamp showed a significant degradation efficiency among other types of lamps. Additionally, when using the UVC at different powers, the degradation efficiencies at 100 minutes were at 30%, 40%, and 31% for 6, 12, and 15 W, respectively. This indicates that the UVC lamp at 12 W was the suitable wavelength and power for the degradation of benzene. Further investigation showed that coating TiO2 on ring-shaped plastic media provided the highest degradation efficiency over the spherical and powder forms. It was because the light from the lamp had a better transmission through the hollow of the ring-shaped catalyst and, therefore, provided a better reaction rate than other types of catalysts. At the same condition and 100 min of operation time, the degradation efficiency of each catalyst is orderly: 5TPcB (56%)>3TPcB (49%)>1TPcB (43%)>alumina ball (32%)>powder (20%). In addition, it was also found that the optimum volume loading of ring-shaped 5TPcB catalyst in the column was 15% v/v. It provided the best degradation efficiency about 58% which was significantly higher among other conditions. This finding has proven the suitability of photocatalysis as an alternative polishing VOCs degradation in aqueous phase for further absorbent regeneration.

  • Open Access

    Effect of solid media addition on mass transfer and bubble dynamics in bubble column reactor

    by Bonita Pen, Phaly Ham, Saret Bun, Pattarasiri Fagkaew, Pichet Chaiwiwatworakul, Pisut Painmanakul

    The development of a bubble column reactor (BCR) has been investigated in terms of various related aspects for improving gas-liquid mass transfer. However, a co


  • Open Access

    Improving the Separation of PS and ABS Plastics Using Modified Induced Air Flotation with a Mixing Device

    by Pattarasiri Fagkaew, Nattawin Chawaloesphonsiya, Saret Bun, Pisut Painmanakul

    A dramatic increase in plastic waste has resulted in a strong need to increase plastic recycling accordingly. A selective flotation has been highlighted due to its outstanding efficiency for the separation of mixed plastics with analogous physicochemical characteristics. In this study, the effects of design and operational factors on the bubble’s hydrodynamic and mixing parameters in induced air flotation (IAF) with a mixing device were investigated through a design of experiment method (DOE) analysis for improving the plastic separation efficiency (i.e., PS and ABS). As a result of DOE analysis, the increase in the induced air tube diameter together with the rotational speed could generate a smaller bubble size. This led to the enhancement of the ratio of interfacial area to velocity gradient (a/G), which was interestingly found to be a significant factor affecting plastic recovery apart from the chemical agents. It demonstrates that operating IAF with a mixing device at a greater a/G ratio improved the plastic separation performance. These findings suggest that operating an IAF process with a mixing device at suitable a/G conditions could be a promising technique for separating plastic wastes, which have similar physicochemical characteristics as PS and ABS.


  • Open Access

    Studying Waste Separation Behaviors and Environmental Impacts toward Sustainable Solid Waste Management: A Case Study of Bang Chalong Housing, Samut Prakan, Thailand

    by Pavinee Pongpunpurt, Pakornkeat Muensitthiroj, Pat Pinitjitsamut, Pavisorn Chuenchum, Pisut Painmanakul, Nattawin Chawaloesphonsiya, Thaksina Poyai

    This study aims to develop more inclusive and sustainable waste management practices to be implemented in Bang Chalong Housing, a model community with unsatisfactory waste separation and recycling rate. The extended theory of planned behavior was employed to investigate the effect of attitude, subjective norm, perceived behavioral control, knowledge, and situational factors on household waste separation intention and behavior, using structural equation modeling as a tool. Based on the questionnaire responses of 321 residents, the house owner’s status exhibited a considerable impact on waste-sorting behavior. Knowledge (β = 0.653; p < 0.001) and subjective norm (β = 0.160; p < 0.05) were two significant predictors of the respondents’ intention, which showed a strong influence on household waste separation behavior (β = 0.804; p < 0.001). Various waste management scenarios were also evaluated through material flow analysis and life cycle assessment. Installing a waste-sorting plant in addition to the current approach (recycling and landfilling) could annually reduce 26.4 tons of solid waste from being landfilled and mitigate GHG emissions by up to 47.4 tons CO2 equivalent. Finally, the implications of these results on designing interventions and amending waste management schemes were discussed.


  • Open Access

    Development of Integrated Electrocoagulation-Sedimentation (IECS) in Continuous Mode for Turbidity and Color Removal

    by Saret Bun, Penghour Hong, Nattawin Chawaloesphosiya, Sreynich Pang, Sreyla Vet, Phaly Ham, Rathborey Chan, Pisut Painmanakul

    The present work focused on the development and evaluation of a compact electrocoagulation (EC) reactor, combined between EC and clarifier processes in continuous modes for decolorization and turbidity removal, named the integrated electrocoagulation-sedimentation reactor (IECS). The experiments were firstly conducted in the four-liter batch column in order to optimize the EC configuration and operation condition. The removal kinetics were also investigated and predicted for kinetic correlations. After various optimization steps, the IECS reactor was conducted, consisting of EC and clarifier compartments. Liquid flow pattern in EC compartment was examined through resident time distribution technique for defining the number of EC units and divided baffles. In summary, four units of EC were placed in the EC compartment of the IECS reactor with 90% in the width of three baffles. Each EC unit had two pairs of aluminum electrode plats in monopolar arrangement with a 1.5 cm gap and required a current density of 13.5 mA/cm2. For the clarifier compartment, it was mainly designed based on the batch settling test for separating the precipitated particles. The treatment performance of the IECS reactor was tested at different liquid flows in order to reduce the pollutant to a certain level. For the individual condition, liquid flow rates of 3 and 1 L/min were defined for turbidity and color, respectively. If both pollutants are presented simultaneously, a liquid flow rate of 1–2 L/min can be used for decreasing turbidity from 250 to <20 NTU and color from 6000 to <300 ADMI.


  • Open Access

    Effective Analysis of Different Gas Diffusers on Bubble Hydrodynamics in Bubble Column and Airlift Reactors towards Mass Transfer Enhancement

    by Phaly Ham, Saret Bun, Pisut Painmanakul, Kritchart Wongwailikhit

    Even bubble column reactors (BCR) and airlift reactors (ALR) have been developed in terms of various related aspects towards mass transfer enhancement, the effective analysis of gas diffuser types on mass transfer and gas–liquid hydrodynamic characteristics is still limited. Therefore, the present study aims to analyze the relative effect of different types of air diffusers on bubble hydrodynamics and mass transfer performance to understand their behaviors and define the best type. The experiments were conducted by varying different diffuser types, reactor types (BCR and ALR), and superficial gas velocity (Vg) (0.12 to 1.00 cm/s). Five air diffusers including commercial fine sand (F-sand) and coarse sand (C-sand) diffusers, and acrylic perforated diffusers with orifice sizes of 0.3 mm (H-0.3), 0.6 mm (H-0.6), and 1.2 mm (H-1.2), were used in this study. For every condition, it was analyzed in terms of bubble hydrodynamics and oxygen mass transfer coefficient (KLa). Lastly, the selected diffusers that provided the highest KLa coefficient were evaluated with a solid media addition case. The results of both reactor classes showed that F-sand, the smallest orifice diffuser, showed the smallest air bubbles (3.14–4.90 mm) compared to other diffusers, followed by C-sand, which larger about 22–28% on average than F-sand. ALR exhibited a better ability to maintain smaller bubbles than BCR. Moreover, F-sand and C-sand diffusers showed a slower rising velocity through their smaller bubbles and the tiny bubble recirculation in ALR. Using F-sand in ALR, the rising velocity is about 1.60–2.58 dm/s, which is slower than that in BCR about 39–54%. F-sand and C-sand were also found as the significant diffusers in terms of interfacial area and gas hold-up. Then, the KLa coefficient was estimated in every diffuser and reactor under the varying of Vg. Up to 270% higher KLa value was achieved from the use of F-sand and C-sand compared to other types due to their smaller bubbles generated/maintained and longer bubble retention time through slower rising velocity. After adding 10% ring shape plastic media into the reactors with F-sand and C-sand diffusers, a better performance was achieved in terms of KLa coefficient (up to 39%) as well as gas hold-up and liquid mixing. Lastly, ALR also had a larger portion of mixed flow pattern than BCR. This eventually promoted mass transfer by enhancing the mixed flow regime.


  • Open Access

    A Survey of Household Water Use and Groundwater Quality Index Assessment in a Rural Community of Cambodia

    by Saret Bun, Sreymao Sek, Chantha Oeurng, Manabu Fujii, Phaly Ham, Pisut Painmanakul

    To propose an efficient system for addressing water scarcity in a rural area through groundwater use, the information on water consumption and interpretation of groundwater quality are essential for estimating the optimal preparation of the comprehensive water system. Hence, this study aimed to estimate the current household domestic water consumption and groundwater quality index of currently accessed wells in a small rural community of Preyveng province, Cambodia as a practical and beneficial as well as a model for the water resource sector in rural areas. The questionnaire survey was designed as the main instrument for collecting the household water use as face-to-face interviews. The result showed that the average daily water consumption in the Preal commune is about 71 L per capita, which is almost two times lower than the minimum water quantity recommended by the World Health Organization (WHO), 150 L/day per capita. Moreover, 100% of the households in this commune heavily rely on groundwater wells for domestic water use and more than 50% confirmed that they used raw groundwater as drinking water without a proposer treatment system. Approximately 70% of the people in Preal wishes to have a clean water supply and more than 80% of the household had a positive willingness to pay for clean water supply. In terms of groundwater quality in the Preal commune, it is mainly contaminated by iron, arsenic, fluoride, and manganese, which are mainly associated with human health effects from daily consumption. About 75% of groundwater wells are presented in poor conditions and were unsuitable for drinking purposes. Lastly, the suitable water treatment and supply should be considered in order to reduce the effects on people’s health as well as to improve living conditions.


  • Open Access

    Relative Effect of Additional Solid Media on Bubble Hydrodynamics in Bubble Column and Airlift Reactors towards Mass Transfer Enhancement

    by Prajak Sastaravet, Saret Bun, Kritchart Wongwailikhit, Nattawin Chawaloesphonsiya, Manabu Fujii, Pisut Painmanakul

    Many researchers have focused on multi-phase reactor development for improving mass transfer performance. However, solid particle addition in gas–liquid contactor for better oxygen mass transfer performance is still limited. Hence, this study aims to analyze the relative effect of different types of local solid media on the bubble hydrodynamic characteristics towards mass transfer enhancement in bubble columns (BCR) and airlift reactors (ALR). This was investigated by varying solid media types (ring, sphere, cylinder, and square), solid loadings (0%–15%), and superficial gas velocities (Vg) (2.6–15.3 × 10−3 m/s) in terms of the bubble hydrodynamic and oxygen mass transfer parameters. The result showed that bubble size distribution in BCR and ALR with additional plastic media was smaller than that without media addition, approximately 22%–27% and 5%–29%, respectively, due to the increase of the bubble breaking rate and the decrease of the bubble rising velocity (UB). Further, adding media in both reactors significantly decreased the UB value. Since media increased flow resistance, resulting in decreased liquid velocity, it can also be the moving bed to capture or block the bubbles from free rising. Therefore, oxygen mass transfer performance was investigated. The oxygen transfer coefficient (KLa) in BCR with solid media addition was enhanced up to 31%–56% compared to a non-addition case, while this enhancement was greater at higher solid loading due to its higher effective surface, resulting in a higher bubble break-up rate compared to the lower loading. In ALR, up to 38.5% enhanced KLa coefficient was archived after adding plastic media over the non-addition case. In conclusion, ring and cylinder media were found to be the most significant for improving KLa value in BCR and ALR, respectively, without extra energy.