Kazuhiro Takahashi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Kazuhiro Takahashi has a total of 104 co-authors. Here are the top co-authors by number of shared publications:
- Yong-Joon Choi
Toyohashi University of Technology
17 shared publications - Kazuaki Sawada
Toyohashi University of Technology
15 shared publications Kazuaki Sawada
14 shared publications- Toshihiko Noda
Toyohashi University of Technology
13 shared publications - Kazuaki Sawada
Department of Electrical and Electronic Information Engineering, Toyohashi University of Technology, Toyohashi, Aichi 441-8580, Japan
7 shared publications - Tatsuya Iwata
Toyohashi University of Technology
5 shared publications
Latest Publications
- Open Access
- 6 April 2026
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 460
Multimodal detection of molecular mass and particle number using an electrothermally driven graphene resonant sensor
- 6 April 2026
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 460
Open AccessMultimodal detection of molecular mass and particle number using an electrothermally driven graphene resonant sensor
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (36) , 1724
(Invited) Filter-Free Wavelength Sensor for Multi-Analyte Fluorescence Detection in Biofield Applications
Wavelength and light intensity detection are critical in diverse analytical fields, including medical, environmental, chemical, biofield, and agricultural analyses. In biofield research, optical detection of wavelength information and light intensity variations, such as absorption, fluorescence, and spectral shift, is paramount for disease prediction, diagnosis, and analysis. Conventional methods employ filter cubes in fluorescence microscopes and monochromators for detecting cell information while offering high sensitivity and selectivity often present limitations due to their bulky size and high cost, thereby hindering their integration into portable point-of-care testing (POCT) devices. To address these challenges, significant research efforts have been directed toward developing high-performance, miniaturized systems leveraging semiconductor processes. On-chip photodetection devices, including fluorescence detection sensors integrating interference or absorption filters on CMOS image sensors, offer enhanced selectivity and sensitivity. However, detecting multi-wavelength changes associated with fluorescent reagents remains challenging due to the inherent integration of optical filters. Building upon these advancements in miniaturized photodetection, we reported the development of a filter-free wavelength sensor incorporating a photogate structure in our previous work [1, 2]. This sensor enables the simultaneous detection of both light intensity and wavelength without the necessity of optical filters, capitalizing on the intrinsic wavelength-dependent light absorption depth within silicon. The sensor was fabricated using a 1-polysilicon, 2-metal process at the LSI facility of the Toyohashi University of Technology, Japan. It features a three-layer architecture comprising deep n-well and p-well regions formed on a p-type silicon substrate. The application of a voltage to the photogate and n-well generates a potential peak (W) beneath the sensing area, effectively dividing the incident light-generated photocurrent into a surface component (Ifd) and a bottom component (Inw) based on the potential peak W. Wavelength identification is achieved through the analysis of the current ratio (Inw/Ifd). For biofield applications involving multi-peak light sources, the centroid wavelength is correlated with this current ratio, with experimental validation confirming a proportional relationship attributed to silicon's light absorption characteristics. Notably, the current ratio remains invariant to changes in light intensity, allowing for light intensity estimation by summing the individual current components. This paper introduces fluorescence detection methods utilizing our developed filter-free wavelength sensor. First, we demonstrate the sensor's capability for multiple fluorescence reagent detection by successfully identifying and quantifying different fluorescent dyes, showcasing its potential for multiplexed assays [2]. Building upon this, we present the results of multi-fluorescence sphere detection, where distinct fluorescently labeled microspheres were clearly distinguished based on their emission wavelengths, highlighting the sensor's spatial resolution and spectral discrimination abilities, with potential applications in microflow cytometry [3]. Finally, we successfully identified fluorescence emitted from multiple Legionella bacteria. By employing specific fluorescent labeling techniques targeting different strains or cellular components of Legionella, our filter-free wavelength image sensor enabled the simultaneous detection and differentiation of these bacteria, demonstrating its applicability in rapid and label-specific pathogen detection for biofield applications [4]. These diverse applications highlight the potential of the filter-free wavelength sensor as a versatile tool for various bioanalytical assays, underscoring its utility in biological and medical diagnostics, particularly in scenarios requiring cost-effective, portable, and multi-analyte detection capabilities. In the future, we will continue research to develop an optical sensor system that is more compact, sensitive, and selective and can be applied to various fields; furthermore, we will explore the potential of this sensor to detect other physical information beyond wavelength, such as temperature or hydrogen ion exponent, potentially broadening the sensor's utility in integrated microfluidic systems. [1] Multi-wavelength fluorescence detection of submicromolar concentrations using a filter-free fluorescence sensor, Sensors and Actuators B: Chemical, 256, pp.38-47 (2018) [2] Demonstrating a Filter-Free Wavelength Sensor with Double-Well Structure and Its Application, Biosensors , 12(11), p.1033 (2022) [3] Development of an on-chip microfluidic system with filter-free multiple-wavelength sensor for microflow cytometry, Sensors and Actuators B: Chemical, 350(1), p.130896 (2022) [4] Simultaneous visualization of multiple wavelengths by filter-free wavelength imaging system, Sensors and Actuators A: Physical, 365(1), p.114816 (2024)
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (36) , 1724
(Invited) Filter-Free Wavelength Sensor for Multi-Analyte Fluorescence Detection in Biofield Applications
Wavelength and light intensity detection are critical in diverse analytical fields, including medical, environmental, chemical, biofield, and agricultural analyses. In biofield research, optical detection of wavelength information and light intensity variations, such as absorption, fluorescence, and spectral shift, is paramount for disease prediction, diagnosis, and analysis. Conventional methods employ filter cubes in fluorescence microscopes and monochromators for detecting cell information while offering high sensitivity and selectivity often present limitations due to their bulky size and high cost, thereby hindering their integration into portable point-of-care testing (POCT) devices. To address these challenges, significant research efforts have been directed toward developing high-performance, miniaturized systems leveraging semiconductor processes. On-chip photodetection devices, including fluorescence detection sensors integrating interference or absorption filters on CMOS image sensors, offer enhanced selectivity and sensitivity. However, detecting multi-wavelength changes associated with fluorescent reagents remains challenging due to the inherent integration of optical filters. Building upon these advancements in miniaturized photodetection, we reported the development of a filter-free wavelength sensor incorporating a photogate structure in our previous work [1, 2]. This sensor enables the simultaneous detection of both light intensity and wavelength without the necessity of optical filters, capitalizing on the intrinsic wavelength-dependent light absorption depth within silicon. The sensor was fabricated using a 1-polysilicon, 2-metal process at the LSI facility of the Toyohashi University of Technology, Japan. It features a three-layer architecture comprising deep n-well and p-well regions formed on a p-type silicon substrate. The application of a voltage to the photogate and n-well generates a potential peak (W) beneath the sensing area, effectively dividing the incident light-generated photocurrent into a surface component (Ifd) and a bottom component (Inw) based on the potential peak W. Wavelength identification is achieved through the analysis of the current ratio (Inw/Ifd). For biofield applications involving multi-peak light sources, the centroid wavelength is correlated with this current ratio, with experimental validation confirming a proportional relationship attributed to silicon's light absorption characteristics. Notably, the current ratio remains invariant to changes in light intensity, allowing for light intensity estimation by summing the individual current components. This paper introduces fluorescence detection methods utilizing our developed filter-free wavelength sensor. First, we demonstrate the sensor's capability for multiple fluorescence reagent detection by successfully identifying and quantifying different fluorescent dyes, showcasing its potential for multiplexed assays [2]. Building upon this, we present the results of multi-fluorescence sphere detection, where distinct fluorescently labeled microspheres were clearly distinguished based on their emission wavelengths, highlighting the sensor's spatial resolution and spectral discrimination abilities, with potential applications in microflow cytometry [3]. Finally, we successfully identified fluorescence emitted from multiple Legionella bacteria. By employing specific fluorescent labeling techniques targeting different strains or cellular components of Legionella, our filter-free wavelength image sensor enabled the simultaneous detection and differentiation of these bacteria, demonstrating its applicability in rapid and label-specific pathogen detection for biofield applications [4]. These diverse applications highlight the potential of the filter-free wavelength sensor as a versatile tool for various bioanalytical assays, underscoring its utility in biological and medical diagnostics, particularly in scenarios requiring cost-effective, portable, and multi-analyte detection capabilities. In the future, we will continue research to develop an optical sensor system that is more compact, sensitive, and selective and can be applied to various fields; furthermore, we will explore the potential of this sensor to detect other physical information beyond wavelength, such as temperature or hydrogen ion exponent, potentially broadening the sensor's utility in integrated microfluidic systems. [1] Multi-wavelength fluorescence detection of submicromolar concentrations using a filter-free fluorescence sensor, Sensors and Actuators B: Chemical, 256, pp.38-47 (2018) [2] Demonstrating a Filter-Free Wavelength Sensor with Double-Well Structure and Its Application, Biosensors , 12(11), p.1033 (2022) [3] Development of an on-chip microfluidic system with filter-free multiple-wavelength sensor for microflow cytometry, Sensors and Actuators B: Chemical, 350(1), p.130896 (2022) [4] Simultaneous visualization of multiple wavelengths by filter-free wavelength imaging system, Sensors and Actuators A: Physical, 365(1), p.114816 (2024)
- 23 January 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (8) , 4365-4371
Elastomer-assisted graphene transfer technique for enhanced resonance characteristics in chemisorption-based graphene resonant mass sensors
We develop a graphene-based resonant sensor to enhance the resonant properties by applied strain. An aptamer-modified sensor exhibited a frequency shift in response to inactivated SARS-CoV-2 virus, demonstrating a mass sensitivity of 0.99 zg Hz −1 .
- 23 January 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (8) , 4365-4371
Elastomer-assisted graphene transfer technique for enhanced resonance characteristics in chemisorption-based graphene resonant mass sensors
We develop a graphene-based resonant sensor to enhance the resonant properties by applied strain. An aptamer-modified sensor exhibited a frequency shift in response to inactivated SARS-CoV-2 virus, demonstrating a mass sensitivity of 0.99 zg Hz −1 .
- 8 January 2025
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 64 (1)
Machine learning-based wavelength detection system
This study proposes an AI-based filter-free wavelength sensor (FFS) system that identifies wavelengths using the absorption coefficient of silicon. Conventional systems rely on optical components, making them complex and difficult to miniaturize. Additionally, signals are prone to environmental and electrical interference. The proposed system, which consists of an analog circuit for signal conversion and a microcontroller with machine learning algorithms, processes signals and calculates wavelengths in real-time. It can detect central wavelengths in the 400–700 nm range with a 1.74% error rate, even with varying light intensities (0.20, 0.25, and 0.30 mW/cm²). This system enables accurate, real-time wavelength detection without optical components, overcoming challenges of traditional systems.
- 8 January 2025
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 64 (1)
Machine learning-based wavelength detection system
This study proposes an AI-based filter-free wavelength sensor (FFS) system that identifies wavelengths using the absorption coefficient of silicon. Conventional systems rely on optical components, making them complex and difficult to miniaturize. Additionally, signals are prone to environmental and electrical interference. The proposed system, which consists of an analog circuit for signal conversion and a microcontroller with machine learning algorithms, processes signals and calculates wavelengths in real-time. It can detect central wavelengths in the 400–700 nm range with a 1.74% error rate, even with varying light intensities (0.20, 0.25, and 0.30 mW/cm²). This system enables accurate, real-time wavelength detection without optical components, overcoming challenges of traditional systems.
- Open Access
Sensitivity Analysis of an Optical Interferometric Surface Stress Ethanol Gas Sensor with a Freestanding Nanosheet
Ethanol (EtOH) gas detection has garnered considerable attention owing to its wide range of applications in industries such as food, pharmaceuticals, medical diagnostics, and fuel management. The development of highly sensitive EtOH-gas sensors has become a focus of research. This study proposes an optical interferometric surface stress sensor for detecting EtOH gas. The sensor incorporates a 100 nm-thick freestanding membrane of Parylene C and gas-sensitive polymethylmethacrylate (PMMA) fabricated within a microcavity on a Si substrate. The results showed that reducing the thickness of the freestanding Parylene C membrane is essential for achieving higher sensitivity. Previously, a 100-nm-thick membrane transfer onto microcavities was achieved using a surfactant-assisted release technique. However, polymerization inhibition caused by the surfactant presented challenges in forming ultrathin membranes of several tens of nanometers. In this study, we employed a surfactant-free release technique using a hydrophilic natural oxide layer to successfully form a 14-nm-thick freestanding Parylene C membrane. In contrast, the optimum thickness of the gas-adsorbed PMMA membrane was approximately 295 nm. Moreover, we demonstrated that this thinner membrane improved EtOH gas detection sensitivity by a factor of eight compared with our previously reported sensor. Thus, this study advances the field of nanoscale materials and sensor technology.
Open AccessSensitivity Analysis of an Optical Interferometric Surface Stress Ethanol Gas Sensor with a Freestanding Nanosheet
Ethanol (EtOH) gas detection has garnered considerable attention owing to its wide range of applications in industries such as food, pharmaceuticals, medical diagnostics, and fuel management. The development of highly sensitive EtOH-gas sensors has become a focus of research. This study proposes an optical interferometric surface stress sensor for detecting EtOH gas. The sensor incorporates a 100 nm-thick freestanding membrane of Parylene C and gas-sensitive polymethylmethacrylate (PMMA) fabricated within a microcavity on a Si substrate. The results showed that reducing the thickness of the freestanding Parylene C membrane is essential for achieving higher sensitivity. Previously, a 100-nm-thick membrane transfer onto microcavities was achieved using a surfactant-assisted release technique. However, polymerization inhibition caused by the surfactant presented challenges in forming ultrathin membranes of several tens of nanometers. In this study, we employed a surfactant-free release technique using a hydrophilic natural oxide layer to successfully form a 14-nm-thick freestanding Parylene C membrane. In contrast, the optimum thickness of the gas-adsorbed PMMA membrane was approximately 295 nm. Moreover, we demonstrated that this thinner membrane improved EtOH gas detection sensitivity by a factor of eight compared with our previously reported sensor. Thus, this study advances the field of nanoscale materials and sensor technology.
- 9 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (24) , 40196-40203
CMOS-Based Ion Image Sensor Enabling pH Measurement Under Light Irradiation
The use of conventionally developed pH image sensors under light irradiation is challenging owing to the strong influence of light signal contamination. Thus, this study developed a pH image sensor that achieves pH measurement without light signal contamination. We propose a method to separate light and pH information by combining and arraying two types of pixels with different characteristics. A proof-of-concept sensor was designed as a 32 × 32-pixel image sensor. The characterization results of the fabricated sensor demonstrated its capability to simultaneously measure two types of information with a pH and light intensity measurement error of 10%. The proposed method enabled pH imaging under light irradiation, which was previously only possible under dark environments. Consequently, applications in smart agriculture, wherein the sensor must operate under light irradiation, were rendered possible. The proposed method is expected to be deployed for real-time monitoring of ion information in plants, which was not previously possible.
- 9 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (24) , 40196-40203
CMOS-Based Ion Image Sensor Enabling pH Measurement Under Light Irradiation
The use of conventionally developed pH image sensors under light irradiation is challenging owing to the strong influence of light signal contamination. Thus, this study developed a pH image sensor that achieves pH measurement without light signal contamination. We propose a method to separate light and pH information by combining and arraying two types of pixels with different characteristics. A proof-of-concept sensor was designed as a 32 × 32-pixel image sensor. The characterization results of the fabricated sensor demonstrated its capability to simultaneously measure two types of information with a pH and light intensity measurement error of 10%. The proposed method enabled pH imaging under light irradiation, which was previously only possible under dark environments. Consequently, applications in smart agriculture, wherein the sensor must operate under light irradiation, were rendered possible. The proposed method is expected to be deployed for real-time monitoring of ion information in plants, which was not previously possible.
- 1 April 2024
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 63 (4) , 04SP43
Wireless wavelength measurement system with temperature compensation using filter-free wavelength sensors
Portable wavelength detection systems have been developed for various environmental and biochemical applications. Conventional systems have some limitations as they are unable to adapt to changes in wavelength and rely on optical filters or slits to distinguish between different wavelengths. To address these limitations, a filter-free wavelength sensor system was proposed, utilizing the absorption coefficient of silicon to identify wavelengths. The proposed system comprises an analog circuit for measuring photocurrent from a filter-free wavelength sensor, integrated with a temperature sensor and microcontroller for signal processing. The proposed system can measure currents with a resolution of 1.2 pA within a 30 nA range, achieving a coefficient of determination of 0.999 for measured currents in relation to light intensity. The microcontroller features a temperature compensation algorithm, enabling wireless control and data transmission. Applying temperature compensation reduced the rate of errors in the data by 61%. By eliminating the need for optical components, a wireless measurement system was developed that can accurately identify wavelengths.
- 1 April 2024
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 63 (4) , 04SP43
Wireless wavelength measurement system with temperature compensation using filter-free wavelength sensors
Portable wavelength detection systems have been developed for various environmental and biochemical applications. Conventional systems have some limitations as they are unable to adapt to changes in wavelength and rely on optical filters or slits to distinguish between different wavelengths. To address these limitations, a filter-free wavelength sensor system was proposed, utilizing the absorption coefficient of silicon to identify wavelengths. The proposed system comprises an analog circuit for measuring photocurrent from a filter-free wavelength sensor, integrated with a temperature sensor and microcontroller for signal processing. The proposed system can measure currents with a resolution of 1.2 pA within a 30 nA range, achieving a coefficient of determination of 0.999 for measured currents in relation to light intensity. The microcontroller features a temperature compensation algorithm, enabling wireless control and data transmission. Applying temperature compensation reduced the rate of errors in the data by 61%. By eliminating the need for optical components, a wireless measurement system was developed that can accurately identify wavelengths.
- 22 December 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-02 (30) , 1544
(Invited) Detection of Wavelength Information by Filter-Free Wavelength Sensor and Its Applications
This paper introduces the wavelength and light intensity detection method using the filter-free wavelength sensor without optical filters. Optical detection methods are widely used in medical, environmental, chemical, biofield, and agricultural analyses. In the biofield, the optical detection method makes it possible to predict, diagnose, and analyze diseases by detecting the wavelength information and light intensity, such as absorption, fluorescence, and spectral shift. In order to measure a specific wavelength and intensity of light, mainly used a detection method such as a filter cube of a fluorescence microscope or a monochromator of a spectrometer system. Even if this system has high sensitivity and selectivity, it is not easy to apply to POCTs that require portability due to the high price and increased system volume due to the integration of optical filters and other parts. Therefore, various studies have reported using semiconductor processes to detect the wavelength and light intensity with a high-performance and miniaturized system. An on-chip photodetection device has been reported, such as a fluorescence detection sensor to integrate interference or absorption filters on CMOS image sensors with high selectivity and sensitivity. Since the specific wavelength of light intensity detection is possible, it can apply to biofields such as fluorescence analysis. However, detecting different wavelength changes by fluorescent reagent is difficult because the optical filter is integrated into the CMOS image sensor. A method of multi-wavelength analysis with the single-pixel without an optical filter is reported using a CMOS-buried quad p-n junction photodetector. Since the light wavelength has a different absorption depth depending on the silicon absorption coefficient, it is possible to separate wavelength by measuring the current generated at each p-n junction. Therefore, it will provide a high-space-resolution image in the biofield. However, the possibility detection wavelength band is fixed according to the buried p-n junction numbers and depth. Previously, we reported a filter-free wavelength sensor with a photogate structure. Sensor can detect light intensity and wavelength without optical filters based on the dependence of the light absorption depth in silicon. The sensor fabricates using the 1-polysilicon, 2-metal process in the LSI facility of the Toyohashi University of Technology in Japan, as shown in Fig1(a). The sensor consists of a three-layer structure where deep n-well and p-well were formed on a p-type silicon substrate, as shown in Fig1(b). Applying a voltage to the photogate and n-well forms a potential peak W as a mountain shape below the sensing area. Therefore, the photocurrent generated by the incident light was divided into the surface side (I PG), and bottom side (I n-well) based on the potential peak W and wavelength identification is possible from the current ratio (I n-well/I PG). To detect the wavelength information of multi-peak light for applications in the biofield, compare the centroid wavelength and current ratio. We experimentally confirmed that the centroid wavelength was proportional to the current ratio by the light absorption depth of silicon. Since the light absorption depth depends on the light wavelength, the current ratio is constant even when the light intensity changes. Therefore, estimation of the light intensity is possible by the sum of each current. We proposed a wavelength, spectral shift, and absorbance measure method using a filter-free wavelength sensor to apply various fields. Figure 2(a) shows a schematic for detecting the fluorescence wavelength. Without using optical filters, fluorescence can be quantified by calculating the centroid wavelength of the light even when the excitation light is emitted simultaneously. In addition, it successfully identified fluorescence emitted from Legionella bacteria [1]. Figure 2(b) shows a schematic diagram that can identify the change in the spectrum using a sensor. Integrating an LSPR biosensor into a filter-free wavelength sensor makes it possible to measure the amount of spectrum changed by molecular binding. Therefore, miniaturization of the LSPR detection system becomes possible, and we succeeded in detecting and quantifying the S-protein of SARS-CoV-2 [2]. Figure 2(c) shows a schematic diagram of the absorbance measurements method for samples that absorb a specific wavelength range. By the proposed absorbance measurement method was possible to measure the ratio of chlorophyll content and chlorophyll a/b ratio contributing to plant photosynthesis [3]. The filter-free wavelength sensor fabricated by the semiconductor process has been confirmed for its application as an optical detection system. In the future, we will continue research to develop an optical sensor system that is more compact, sensitive, and selective and can be applied to various fields. [1] Biosensors, vol.12, no.11, p.1033 (2022) [2] Applied Physics Express, vol.16, no.1, p.012012 (2023) [3] Jpn. J. Appl. Phys., vol.61, p.SD1041 (2022) Figure 1
- 22 December 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-02 (30) , 1544
(Invited) Detection of Wavelength Information by Filter-Free Wavelength Sensor and Its Applications
This paper introduces the wavelength and light intensity detection method using the filter-free wavelength sensor without optical filters. Optical detection methods are widely used in medical, environmental, chemical, biofield, and agricultural analyses. In the biofield, the optical detection method makes it possible to predict, diagnose, and analyze diseases by detecting the wavelength information and light intensity, such as absorption, fluorescence, and spectral shift. In order to measure a specific wavelength and intensity of light, mainly used a detection method such as a filter cube of a fluorescence microscope or a monochromator of a spectrometer system. Even if this system has high sensitivity and selectivity, it is not easy to apply to POCTs that require portability due to the high price and increased system volume due to the integration of optical filters and other parts. Therefore, various studies have reported using semiconductor processes to detect the wavelength and light intensity with a high-performance and miniaturized system. An on-chip photodetection device has been reported, such as a fluorescence detection sensor to integrate interference or absorption filters on CMOS image sensors with high selectivity and sensitivity. Since the specific wavelength of light intensity detection is possible, it can apply to biofields such as fluorescence analysis. However, detecting different wavelength changes by fluorescent reagent is difficult because the optical filter is integrated into the CMOS image sensor. A method of multi-wavelength analysis with the single-pixel without an optical filter is reported using a CMOS-buried quad p-n junction photodetector. Since the light wavelength has a different absorption depth depending on the silicon absorption coefficient, it is possible to separate wavelength by measuring the current generated at each p-n junction. Therefore, it will provide a high-space-resolution image in the biofield. However, the possibility detection wavelength band is fixed according to the buried p-n junction numbers and depth. Previously, we reported a filter-free wavelength sensor with a photogate structure. Sensor can detect light intensity and wavelength without optical filters based on the dependence of the light absorption depth in silicon. The sensor fabricates using the 1-polysilicon, 2-metal process in the LSI facility of the Toyohashi University of Technology in Japan, as shown in Fig1(a). The sensor consists of a three-layer structure where deep n-well and p-well were formed on a p-type silicon substrate, as shown in Fig1(b). Applying a voltage to the photogate and n-well forms a potential peak W as a mountain shape below the sensing area. Therefore, the photocurrent generated by the incident light was divided into the surface side (I PG), and bottom side (I n-well) based on the potential peak W and wavelength identification is possible from the current ratio (I n-well/I PG). To detect the wavelength information of multi-peak light for applications in the biofield, compare the centroid wavelength and current ratio. We experimentally confirmed that the centroid wavelength was proportional to the current ratio by the light absorption depth of silicon. Since the light absorption depth depends on the light wavelength, the current ratio is constant even when the light intensity changes. Therefore, estimation of the light intensity is possible by the sum of each current. We proposed a wavelength, spectral shift, and absorbance measure method using a filter-free wavelength sensor to apply various fields. Figure 2(a) shows a schematic for detecting the fluorescence wavelength. Without using optical filters, fluorescence can be quantified by calculating the centroid wavelength of the light even when the excitation light is emitted simultaneously. In addition, it successfully identified fluorescence emitted from Legionella bacteria [1]. Figure 2(b) shows a schematic diagram that can identify the change in the spectrum using a sensor. Integrating an LSPR biosensor into a filter-free wavelength sensor makes it possible to measure the amount of spectrum changed by molecular binding. Therefore, miniaturization of the LSPR detection system becomes possible, and we succeeded in detecting and quantifying the S-protein of SARS-CoV-2 [2]. Figure 2(c) shows a schematic diagram of the absorbance measurements method for samples that absorb a specific wavelength range. By the proposed absorbance measurement method was possible to measure the ratio of chlorophyll content and chlorophyll a/b ratio contributing to plant photosynthesis [3]. The filter-free wavelength sensor fabricated by the semiconductor process has been confirmed for its application as an optical detection system. In the future, we will continue research to develop an optical sensor system that is more compact, sensitive, and selective and can be applied to various fields. [1] Biosensors, vol.12, no.11, p.1033 (2022) [2] Applied Physics Express, vol.16, no.1, p.012012 (2023) [3] Jpn. J. Appl. Phys., vol.61, p.SD1041 (2022) Figure 1
- 29 September 2023
- Published by The Electrochemical Society in ECS Transactions
- Vol. 112 (1) , 139-146
(Invited) Detection of Wavelength Information by Filter-Free Wavelength Sensor and Its Applications
This paper introduces the wavelength and light intensity detection method using the filter-free wavelength sensor without optical components. Using a modified CMOS process, we developed a filter-free wavelength sensor with a photogate structure. The sensor can detect light intensity and wavelength without optical filters based on the dependence of the light absorption depth in silicon. Using a developed sensor, we demonstrated a wavelength, spectral shift, and light absorption detection method to apply various fields. In the future, we will continue research to realize an optical sensor system that is more compact, sensitive, and selective.
- 29 September 2023
- Published by The Electrochemical Society in ECS Transactions
- Vol. 112 (1) , 139-146
(Invited) Detection of Wavelength Information by Filter-Free Wavelength Sensor and Its Applications
This paper introduces the wavelength and light intensity detection method using the filter-free wavelength sensor without optical components. Using a modified CMOS process, we developed a filter-free wavelength sensor with a photogate structure. The sensor can detect light intensity and wavelength without optical filters based on the dependence of the light absorption depth in silicon. Using a developed sensor, we demonstrated a wavelength, spectral shift, and light absorption detection method to apply various fields. In the future, we will continue research to realize an optical sensor system that is more compact, sensitive, and selective.
- 1 March 2023
- Published by IOP Publishing in Applied Physics Express
- Vol. 16 (3) , 032004
Polarization-independent transmission color sheet using 2D plasmonic metasurface embedded in elastomer nanosheet
This paper reports the construction of a transmission 2D plasmonic metasurface embedded in an elastomer nanosheet. The transmission color sheet made up of metal nanodots of subwavelength scale can be used as an electronic skin for imaging multicolor spectra. The thicknesses of the polystyrene–polybutadiene–polystyrene nanosheet and Al nanodots were designed to be 200 nm and 50 nm, respectively. Measurements were performed under different duty ratios of subwavelength Al nanodots. The results revealed that a duty ratio of 0.85 yielded the brightest transmitted colors. We successfully demonstrated the realization of 2D plasmonic nanodots without polarization dependency.
- 1 March 2023
- Published by IOP Publishing in Applied Physics Express
- Vol. 16 (3) , 032004
Polarization-independent transmission color sheet using 2D plasmonic metasurface embedded in elastomer nanosheet
This paper reports the construction of a transmission 2D plasmonic metasurface embedded in an elastomer nanosheet. The transmission color sheet made up of metal nanodots of subwavelength scale can be used as an electronic skin for imaging multicolor spectra. The thicknesses of the polystyrene–polybutadiene–polystyrene nanosheet and Al nanodots were designed to be 200 nm and 50 nm, respectively. Measurements were performed under different duty ratios of subwavelength Al nanodots. The results revealed that a duty ratio of 0.85 yielded the brightest transmitted colors. We successfully demonstrated the realization of 2D plasmonic nanodots without polarization dependency.