CSCaitlin Smythe

Caitlin Smythe

*This is an algorithmically generated author record based on publicly available information.

Caitlin Smythe has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • On the Influence of a Hubside Exducer Cavity and Bleed Air in a Close-Coupled Centrifugal Compressor Stage

    by Peter Kaluza, Christian Landgraf, Philipp Schwarz, Peter Jeschke, Caitlin Smythe

    In aero-engine applications, centrifugal compressors are often close-coupled with their respective diffusers to increase efficiency at the expense of a reduced operating range. The aim of this paper is to show that state-of-the art steady-state computational fluid dynamics (CFD) simulations can model a hubside cavity between an impeller and a close-coupled diffuser and to enhance the understanding of how the cavity affects performance. The investigated cavity is located at the impeller trailing edge, and bleed air is extracted through it. Due to geometrical limitations, the mixing plane is located in the cavity region. Therefore, the previous analyses used only a cut (“simple”) model of the cavity. With the new, “full” cavity model, the region inside the cavity right after the impeller trailing edge is not neglected anymore. The numerical setup is validated using the experimental data gathered on a state-of-the art centrifugal compressor test-rig. For the total pressure field in front of the diffuser throat, a clear improvement is achieved. The results presented reveal a drop in stage efficiency by 0.5%-points caused by a new loss mechanism at the impeller trailing edge. On the hubside, the fundamentally different interaction of the cavity with the coreflow increases the losses in the downstream components resulting in the mentioned stage efficiency drop. Finally, varying bleed air extraction is investigated with both cavity models. Only the full cavity (FC) model captures the changes measured in the experiment.


  • Numerical Investigation of the Unsteady Interaction Within a Close-Coupled Centrifugal Compressor Used in an Aero Engine

    by Benjamin Wilkosz, Markus Zimmermann, Philipp Schwarz, Peter Jeschke, Caitlin Smythe

    The present work forms part of a research project of the Institute of Jet Propulsion and Turbomachinery at the RWTH Aachen University in collaboration with GE Aviation. The subject is the detailed numerical analysis of the unsteady flow field, focusing on the interaction between the impeller and the passage diffuser of a close-coupled transonic centrifugal compressor used in an aero engine. The centrifugal compressor investigated is characterized by a close-coupled impeller and passage diffuser with a radial gap of only 3.6%. The close coupling tends to provide a high aerodynamic efficiency but simultaneously cause a high unsteady interaction between the impeller and the diffuser. These unsteady effects can have a significant impact on the performance of both components and present a challenge to state-of-the-art numerical methods. With increasing compressor efficiency, the more important it is to have an understanding of the detailed unsteady flow physics. Experimental data was obtained from a state-of-the art centrifugal compressor test rig located at the Institute of Jet Propulsion. Steady and unsteady pressure measurements within the impeller and diffuser are used to gain detailed information on the temporal, time-averaged, and spectral pressure distributions within the stage to validate the CFD. The work presented here shows the unsteady phenomena caused by the interaction and the location and propagation of these phenomena within the centrifugal stage. Within the impeller, the exducer is in first order excited by the blade passing frequency (BPF) of the diffuser, whereas in the diffuser both the BPF and the passage passing frequency (PPF), are present up until the end of the pipe-diffuser. Significant effects on the integral component performance could only be identified for the impeller. Special focus is paid to evaluate the diffuser upstream pressure field, since this is the major source of unsteadiness within the impeller. The performance of the rotor decreases due to the unsteady interaction. This effect is traced back to the unsteady tip-clearance flow, in which the time-averaged mass transport decreases, whereas the specific entropy production increases in a nonlinear way. Within the diffuser, local effects counteracting with respect to the integral performance are found. In front of the throat, there is less decay in the total pressure as a result of tangentially expanding pressure waves. Within the passage a decrease in flow uniformity in the unsteady flow is identified as the reason for the lower diffusion up until the throat and higher losses within the downstream diffuser passage.


  • Numerical and Experimental Comparison of a Tandem and Single Vane Deswirler Used in an Aero Engine Centrifugal Compressor

    by Benjamin Wilkosz, Johannes Schmidt, Christian Guenther, Philipp Schwarz, Peter Jeschke, Caitlin Smythe

    The present work is part of the research project at the Institute of Jet Propulsion and Turbomachinery at the RWTH Aachen University in collaboration with GE Aviation. The subject is the numerical and experimental analysis of two blading strategies used in the diffusion system of an aero engine centrifugal compressor. The transonic centrifugal compressor investigated contains a close-coupled impeller and passage diffuser, followed by a deswirler system. The deswirler redirects the flow towards the combustion chamber, while decreasing swirl and recovering pressure. It is characterized by a high aerodynamic loading, due to a moderate inlet Mach number of 0.35, in combination with a required flow redirection of 70 deg in circumferential and 135 deg in meridional direction. For this purpose, two different blading strategies are investigated, both retaining the same meridional flow path and integral chord length. The first design is a tandem configuration with 30 vanes in the first row and 60 vanes in the second row. In principal, this approach benefits from the small wetted surface, the short and thereby stable boundary layers as well as the positive blade interaction due to the close alignment. The second design contains one row of 75 vanes. The higher solidity is needed to compensate for the longer boundary layers. The two deswirlers investigated are compared to a less compact baseline deswirler with simple prismatic vanes. Experimental and numerical data shows that both new configurations have very similar stage efficiency. The single row design shows a higher static pressure recovery, resulting in a +0.2%-points total-to-static isentropic efficiency increase compared to the tandem design. Detailed flow analysis in the deswirler system shows different characteristics in terms of losses, loss mechanisms and pressure build-up. Due to the required high turning, both designs suffer from flow separation. Nevertheless, the single row design shows its robustness under the impact of 3D flow, whereas the tandem suffers from end wall induced losses. The results show that the classical mechanisms making a tandem favorable for high flow turning in 2D flow are counteracted by 3D flow mechanisms caused by the spanwise pressure gradient. The low aspect ratio even increases the effect of 3D end wall mechanisms. These results, combined with a higher manufacturing effort, show that a tandem configuration is not necessarily the superior design for highly 3D flow conditions.


  • Experimental Investigation of a Truncated Pipe Diffuser With a Tandem Deswirler in a Centrifugal Compressor Stage

    by Robert Kunte, Peter Jeschke, Caitlin Smythe

    The subject of this paper is the experimental investigation of three different geometric configurations of the diffusing system in a high pressure centrifugal compressor stage for a jet engine application. The objective of this study is twofold. On the one hand, it seeks to explain the impact of truncating a diffuser and a redesigned tandem deswirler on the global stage performance; on the other hand, it aims to correlate the performance differences with local flow phenomena. For this purpose, a state-of-the-art centrifugal compressor test rig was used. Particle image velocimetry measurements visualize the separation behavior in the pipe diffuser passage. Thereby it is shown that the truncation of the diffuser changed the boundary conditions for the downstream deswirler including a high incidence. Thus, a new tandem deswirler design was implemented and measured. Moreover, the relative position of the two tandem rows is investigated. An optimal relative circumferential position for the stage efficiency and static pressure rise was found. This paper gives fundamental insight into the physical mechanisms of the influence of three geometric configurations in a centrifugal compressor stage, especially in the pipe diffuser and the deswirler. Hence, this study contributes in furthering knowledge of the fundamental principles of flow phenomena in the diffusing system of a centrifugal compressor.


  • Experimental and Numerical Investigation of Tip Clearance and Bleed Effects in a Centrifugal Compressor Stage With Pipe Diffuser

    by Robert Kunte, Philipp Schwarz, Benjamin Wilkosz, Peter Jeschke, Caitlin Smythe

    The subject of this paper is the experimental and numerical investigation of a state-of-the-art high pressure centrifugal compressor stage with pipe diffuser for a jet engine application. This study shows the impact of impeller tip clearance- and bleed-variation on the centrifugal stage. The purpose of this paper is threefold. In the first place, it investigates the effects on the stage performance. Secondly, it seeks to explain local flow-phenomena, especially in the diffuser. Finally, it shows that steady CFD simulations are capable of predicting these phenomena. Experimental data were gathered using conventional pitot and three-hole-probes as well as particle-image-velocimetry. Numerical simulations with the CFD solver TRACE were conducted to get fundamental insight into the flow. Thus, this study contributes greatly towards understanding the principle of the flow phenomena in the pipe diffuser of a centrifugal compressor.