Donald Raboud
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Donald Raboud has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Christopher R. Dennison
Department of Mechanical Engineering, University of Victoria, Victoria, Canada
5 shared publications - Kevin Adanty
Department of Mechanical Engineering, University of Alberta, Edmonton, Canada
5 shared publications - Paris Vakiel
Department of Mechanical Engineering, University of Victoria, Victoria, Canada
5 shared publications - Simon Ouellet
Weapons Effects and Protection Section, Defence R&D Valcartier Research Center, Quebec, Canada
5 shared publications - Yizhao Li
School of Mechatronic Engineering and Automation, Shanghai University, Shanghai, China
5 shared publications - Albert H. Vette
Department of Mechanical Engineering, University of Alberta, Donadeo Innovation Centre for Engineering, Edmonton, Alberta, T6G 1H9, Canada; Department of Biomedical Engineering, University of Alberta, Donadeo Innovation Centre for Engineering, Edmonton, Alberta, T6G 1H9, Canada; Glenrose Rehabilitation Hospital, Alberta Health Services, 10230-111 Avenue, NW, Edmonton, Alberta, T5G 0B7, Canada
4 shared publications
Latest Publications
- Open Access
- 2 November 2023
- Published by Springer Nature in Annals of Biomedical Engineering
- Vol. 52 (3) , 734
Correction: Evaluating the Intracranial Pressure Biofidelity and Response Repeatability of a Physical Head-Brain Model in Frontal Impacts
- 2 November 2023
- Published by Springer Nature in Annals of Biomedical Engineering
- Vol. 52 (3) , 734
Open AccessCorrection: Evaluating the Intracranial Pressure Biofidelity and Response Repeatability of a Physical Head-Brain Model in Frontal Impacts
- Open Access
- 29 May 2023
- Published by Springer Nature in Annals of Biomedical Engineering
- Vol. 51 (8) , 1834
Publisher Correction: Evaluating the Intracranial Pressure Biofidelity and Response Repeatability of a Physical Head-Brain Model in Frontal Impacts
- 29 May 2023
- Published by Springer Nature in Annals of Biomedical Engineering
- Vol. 51 (8) , 1834
Open AccessPublisher Correction: Evaluating the Intracranial Pressure Biofidelity and Response Repeatability of a Physical Head-Brain Model in Frontal Impacts
- 24 April 2023
- Published by Springer Nature in Annals of Biomedical Engineering
- Vol. 51 (8) , 1816-1833
Evaluating the Intracranial Pressure Biofidelity and Response Repeatability of a Physical Head-Brain Model in Frontal Impacts
Headforms are widely used in head injury research and headgear assessment. Common headforms are limited to replicating global head kinematics, although intracranial responses are crucial to understanding brain injuries. This study aimed to evaluate the biofidelity of intracranial pressure (ICP) and the repeatability of head kinematics and ICP of an advanced headform subjected to frontal impacts. Pendulum impacts were performed on the headform using various impact velocities (1–5 m/s) and impactor surfaces (vinyl nitrile 600 foam, PCM746 urethane, and steel) to simulate a previous cadaveric experiment. Head linear accelerations and angular rates in three axes, cerebrospinal fluid ICP (CSFP), and intraparenchymal ICP (IPP) at the front, side, and back of the head were measured. The head kinematics, CSFP, and IPP demonstrated acceptable repeatability with coefficients of variation generally being less than 10%. The BIPED front CSFP peaks and back negative peaks were within the range of the scaled cadaver data (between the minimum and maximum values reported by Nahum et al.), while side CSFPs were 30.9–92.1% greater than the cadaver data. CORrelation and Analysis (CORA) ratings evaluating the closeness of two time histories demonstrated good biofidelity of the front CSFP (0.68–0.72), while the ratings for the side (0.44–0.70) and back CSFP (0.27–0.66) showed a large variation. The BIPED CSFP at each side was linearly related to head linear accelerations with coefficients of determination greater than 0.96. The slopes for the BIPED front and back CSFP-acceleration linear trendlines were not significantly different from cadaver data, whereas the slope for the side CSFP was significantly greater than cadaver data. This study informs future applications and improvements of a novel head surrogate.
- 24 April 2023
- Published by Springer Nature in Annals of Biomedical Engineering
- Vol. 51 (8) , 1816-1833
Evaluating the Intracranial Pressure Biofidelity and Response Repeatability of a Physical Head-Brain Model in Frontal Impacts
Headforms are widely used in head injury research and headgear assessment. Common headforms are limited to replicating global head kinematics, although intracranial responses are crucial to understanding brain injuries. This study aimed to evaluate the biofidelity of intracranial pressure (ICP) and the repeatability of head kinematics and ICP of an advanced headform subjected to frontal impacts. Pendulum impacts were performed on the headform using various impact velocities (1–5 m/s) and impactor surfaces (vinyl nitrile 600 foam, PCM746 urethane, and steel) to simulate a previous cadaveric experiment. Head linear accelerations and angular rates in three axes, cerebrospinal fluid ICP (CSFP), and intraparenchymal ICP (IPP) at the front, side, and back of the head were measured. The head kinematics, CSFP, and IPP demonstrated acceptable repeatability with coefficients of variation generally being less than 10%. The BIPED front CSFP peaks and back negative peaks were within the range of the scaled cadaver data (between the minimum and maximum values reported by Nahum et al.), while side CSFPs were 30.9–92.1% greater than the cadaver data. CORrelation and Analysis (CORA) ratings evaluating the closeness of two time histories demonstrated good biofidelity of the front CSFP (0.68–0.72), while the ratings for the side (0.44–0.70) and back CSFP (0.27–0.66) showed a large variation. The BIPED CSFP at each side was linearly related to head linear accelerations with coefficients of determination greater than 0.96. The slopes for the BIPED front and back CSFP-acceleration linear trendlines were not significantly different from cadaver data, whereas the slope for the side CSFP was significantly greater than cadaver data. This study informs future applications and improvements of a novel head surrogate.
- 19 September 2022
- Published by ASME International in Journal of Biomechanical Engineering
- Vol. 145 (1)
Review of Mechanisms and Research Methods for Blunt Ballistic Head Injury
Head injuries account for 15%–20% of all military injuries and pose a high risk of causing functional disability and fatality. Blunt ballistic impacts are one of the threats that can lead to severe head injuries. This review aims to examine the mechanisms and injury risk assessment associated with blunt ballistic head injury (BBHI). The review further discusses research methods and instrumentation used in BBHI studies, focusing on their limitations and challenges. Studies on the mechanisms of focal and diffuse brain injuries remain largely inconclusive and require further effort. Some studies have attempted to associate BBHIs with head mechanics, but more research is required to establish correlations between head mechanics and injury severity. Limited access to experimental models and a lack of instrumentation capable of measuring the mechanics of brain tissue in situ are potential reasons for the lack of understanding of injury mechanisms, injury correlations, and injury tolerance levels specific to this loading regime. Targeted research for understanding and assessing head injuries in blunt ballistic impacts is a necessary step in improving our ability to design protection systems to mitigate these injuries.
- 19 September 2022
- Published by ASME International in Journal of Biomechanical Engineering
- Vol. 145 (1)
Review of Mechanisms and Research Methods for Blunt Ballistic Head Injury
Head injuries account for 15%–20% of all military injuries and pose a high risk of causing functional disability and fatality. Blunt ballistic impacts are one of the threats that can lead to severe head injuries. This review aims to examine the mechanisms and injury risk assessment associated with blunt ballistic head injury (BBHI). The review further discusses research methods and instrumentation used in BBHI studies, focusing on their limitations and challenges. Studies on the mechanisms of focal and diffuse brain injuries remain largely inconclusive and require further effort. Some studies have attempted to associate BBHIs with head mechanics, but more research is required to establish correlations between head mechanics and injury severity. Limited access to experimental models and a lack of instrumentation capable of measuring the mechanics of brain tissue in situ are potential reasons for the lack of understanding of injury mechanisms, injury correlations, and injury tolerance levels specific to this loading regime. Targeted research for understanding and assessing head injuries in blunt ballistic impacts is a necessary step in improving our ability to design protection systems to mitigate these injuries.
- 1 March 2019
- Published by The Angle Orthodontist (EH Angle Education & Research Foundation) in The Angle Orthodontist
- Vol. 89 (2) , 228-234
Non-invasive evaluation of periodontal ligament stiffness during orthodontic tooth movement
Objectives: To evaluate the longitudinal changes in periodontal ligament (PDL) stiffness during orthodontic tooth movement using the Advanced System for Implant Stability Testing (ASIST). Materials and Methods: ASIST measurements of maxillary canines that were actively retracted into an extraction space were collected approximately once per month for 12 adolescent female patients. The ASIST Stability Coefficient (ASC) values, which are directly related to PDL stiffness, were determined for each visit to examine longitudinal changes for individual canines as they were exposed to different forces (approximately 80 and 150 g) during retraction. Results: The pattern of longitudinal changes in ASC was similar for both canines (regardless of the two force levels applied) in individual patients and across patients. All patients showed some decrease in ASC, with an average maximum reduction in stiffness of 73.4 ± 7.7%. Some recovery was observed for most patients; however, none of the patients had the PDL stiffness return to the pre-treatment value at the final measurement appointment which was some time close after space closure was completed. On average, the ASC value at the final measured visit was 48.1 ± 12.2% of the initial value. No measurements are available after removal of orthodontic appliances and during retention. Conclusions: The ASIST was able to detect changes in PDL stiffness during orthodontic treatment, providing some insight into the mechanical changes that occur at the tooth root interface.
- 1 March 2019
- Published by The Angle Orthodontist (EH Angle Education & Research Foundation) in The Angle Orthodontist
- Vol. 89 (2) , 228-234
Non-invasive evaluation of periodontal ligament stiffness during orthodontic tooth movement
Objectives: To evaluate the longitudinal changes in periodontal ligament (PDL) stiffness during orthodontic tooth movement using the Advanced System for Implant Stability Testing (ASIST). Materials and Methods: ASIST measurements of maxillary canines that were actively retracted into an extraction space were collected approximately once per month for 12 adolescent female patients. The ASIST Stability Coefficient (ASC) values, which are directly related to PDL stiffness, were determined for each visit to examine longitudinal changes for individual canines as they were exposed to different forces (approximately 80 and 150 g) during retraction. Results: The pattern of longitudinal changes in ASC was similar for both canines (regardless of the two force levels applied) in individual patients and across patients. All patients showed some decrease in ASC, with an average maximum reduction in stiffness of 73.4 ± 7.7%. Some recovery was observed for most patients; however, none of the patients had the PDL stiffness return to the pre-treatment value at the final measurement appointment which was some time close after space closure was completed. On average, the ASC value at the final measured visit was 48.1 ± 12.2% of the initial value. No measurements are available after removal of orthodontic appliances and during retention. Conclusions: The ASIST was able to detect changes in PDL stiffness during orthodontic treatment, providing some insight into the mechanical changes that occur at the tooth root interface.
- 1 July 2018
- Published by Wolters Kluwer Health in Otology & Neurotology
- Vol. 39 (6) , e489-e495
Longitudinal Evaluation of Bone-Anchored Hearing Aid Implant Stability Using the Advanced System for Implant Stability Testing (ASIST)
Objective: This study aims to provide a clinical evaluation of the Advanced System for Implant Stability Testing (ASIST) for assessment of implant stability for bone-anchored hearing aid patients. We evaluate the longitudinal changes in implant interface stability during the first year following surgery. Methods: ASIST measurements were collected for 39 patients selected to receive a bone anchored hearing aid for hearing loss. Measurements were collected at the time of surgery and at 3 days, 2 weeks, 1 month, 3 months, 6 months, and 12 months following surgery. Longitudinal changes in ASIST Stability Coefficient (ASC) were determined for each patient. Correlations were investigated between initial implant stability as measured by the ASC and clinical parameters such as operating surgeon, patient age at surgery, and implant type. Results: ASC values ranged from 11.9 to 137.0 (31.9 ± 18.0). On average, there was a slight decrease in ASC up to 3 months after surgery followed by an increase up to 1 year. Preliminary results presented in this study suggest that there may be differences in the initial stability between operating surgeons (p = 0.0012; p = 0.0049) and there was a trend toward possible differences between different implant types. Conclusion: We have shown promising results using the ASIST in a clinical setting for longitudinal evaluation of bone–implant interface integrity. Isolating the interface properties from the implant–abutment system allows for objective comparisons across patients that are not possible with other stability measurement systems.
- 1 July 2018
- Published by Wolters Kluwer Health in Otology & Neurotology
- Vol. 39 (6) , e489-e495
Longitudinal Evaluation of Bone-Anchored Hearing Aid Implant Stability Using the Advanced System for Implant Stability Testing (ASIST)
Objective: This study aims to provide a clinical evaluation of the Advanced System for Implant Stability Testing (ASIST) for assessment of implant stability for bone-anchored hearing aid patients. We evaluate the longitudinal changes in implant interface stability during the first year following surgery. Methods: ASIST measurements were collected for 39 patients selected to receive a bone anchored hearing aid for hearing loss. Measurements were collected at the time of surgery and at 3 days, 2 weeks, 1 month, 3 months, 6 months, and 12 months following surgery. Longitudinal changes in ASIST Stability Coefficient (ASC) were determined for each patient. Correlations were investigated between initial implant stability as measured by the ASC and clinical parameters such as operating surgeon, patient age at surgery, and implant type. Results: ASC values ranged from 11.9 to 137.0 (31.9 ± 18.0). On average, there was a slight decrease in ASC up to 3 months after surgery followed by an increase up to 1 year. Preliminary results presented in this study suggest that there may be differences in the initial stability between operating surgeons (p = 0.0012; p = 0.0049) and there was a trend toward possible differences between different implant types. Conclusion: We have shown promising results using the ASIST in a clinical setting for longitudinal evaluation of bone–implant interface integrity. Isolating the interface properties from the implant–abutment system allows for objective comparisons across patients that are not possible with other stability measurement systems.
- 1 March 2018
- Published by Elsevier in Journal of Biomechanics
- Vol. 69, 129-137
Application of the advanced system for implant stability testing (ASIST) to natural teeth for noninvasive evaluation of the tooth root interface
- 1 March 2018
- Published by Elsevier in Journal of Biomechanics
- Vol. 69, 129-137
Application of the advanced system for implant stability testing (ASIST) to natural teeth for noninvasive evaluation of the tooth root interface
- 1 January 2018
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 119 (1) , 178-184
Comparison of implant stability measurement devices for bone-anchored hearing aid systems
- 1 January 2018
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 119 (1) , 178-184
Comparison of implant stability measurement devices for bone-anchored hearing aid systems
- 1 November 2016
- Published by Elsevier in Journal of Biomechanics
- Vol. 49 (15) , 3651-3659
Advanced System for Implant Stability Testing (ASIST)
- 1 November 2016
- Published by Elsevier in Journal of Biomechanics
- Vol. 49 (15) , 3651-3659
Advanced System for Implant Stability Testing (ASIST)