Emky Valdebenito-Rolack
Emky Valdebenito-Rolack has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Felipe Hansen
Modela Limited, 272 Bath Street, Glasgow G2 4JR, UK
4 shared publications - Daniel Gómez
ProCycla SpA, Camino Fundo El Junco SN, Melipilla 9580000, Chile
3 shared publications - Felipe Sanhueza
University of Concepcion
2 shared publications A. Donoso-Bravo
1 shared publication- Ana Aguilar-Paredes
Molecular Microbiology and Environmental Biotechnology Laboratory, Department of Chemistry & Center of Biotechnology “Dr. Daniel Alkalay Lowitt”, Universidad Técnica Federico Santa María, Valparaíso, Chile
1 shared publication - Andres Donoso-Bravo
Cetaqua, Centro Tecnológico del Agua, Los Pozos 7340, Santiago, Chile
1 shared publication
Latest Publications
- Top Cited PapersOpen Access
Microbial Community in the Composting Process and Its Positive Impact on the Soil Biota in Sustainable Agriculture
Conventional agriculture has important challenges to guarantee soil fertility and sustainable food production. Many agricultural soils in the world are degraded and multiple strategies are currently being developed to restore them. The study of beneficial soil microorganisms has attracted increasing interest due to their relevant role in sustainable agricultural development. The balance and maintenance of ecosystem services, such as biomass transformation, nutrient cycling, plant growth, and health, are directly dependent on soil microbial activity. Therefore, it is important to promote its establishment and propagation. An ancient technique that favors soil biodiversity is the production and application of compost. While numerous studies have focused on the benefits of plant cultivation, fewer studies have focused on the benefits for soil microbiota. The objective of this review was to elucidate the role of the microbiota in the composting process and its impact on soil microorganisms in agriculture. The review presents the advances in the knowledge and importance of microorganisms involved in the composting process and how compost promotes the maintenance and multiplication of beneficial microbial consortia and their ecosystem functions in agricultural soils, shifting towards a more sustainable and resilient agriculture.
Top Cited PapersOpen AccessMicrobial Community in the Composting Process and Its Positive Impact on the Soil Biota in Sustainable Agriculture
Conventional agriculture has important challenges to guarantee soil fertility and sustainable food production. Many agricultural soils in the world are degraded and multiple strategies are currently being developed to restore them. The study of beneficial soil microorganisms has attracted increasing interest due to their relevant role in sustainable agricultural development. The balance and maintenance of ecosystem services, such as biomass transformation, nutrient cycling, plant growth, and health, are directly dependent on soil microbial activity. Therefore, it is important to promote its establishment and propagation. An ancient technique that favors soil biodiversity is the production and application of compost. While numerous studies have focused on the benefits of plant cultivation, fewer studies have focused on the benefits for soil microbiota. The objective of this review was to elucidate the role of the microbiota in the composting process and its impact on soil microorganisms in agriculture. The review presents the advances in the knowledge and importance of microorganisms involved in the composting process and how compost promotes the maintenance and multiplication of beneficial microbial consortia and their ecosystem functions in agricultural soils, shifting towards a more sustainable and resilient agriculture.
- Open Access
- 30 April 2022
- Published by MDPI AG in Microorganisms
- Vol. 10 (5) , 948
Comprehensive ADM1 Extensions to Tackle Some Operational and Metabolic Aspects in Anaerobic Digestion
Modelling in anaerobic digestion will play a crucial role as a tool for smart monitoring and supervision of the process performance and stability. By far, the Anaerobic Digestion Model No. 1 (ADM1) has been the most recognized and exploited model to represent this process. This study aims to propose simple extensions for the ADM1 model to tackle some overlooked operational and metabolic aspects. Extensions for the discontinuous feeding process, the reduction of the active working volume, the transport of the soluble compound from the bulk to the cell interior, and biomass acclimation are presented in this study. The model extensions are included by a change in the mass balance of the process in batch and continuous operation, the incorporation of a transfer equation governed by the gradient between the extra- and intra- cellular concentration, and a saturation-type function where the time has an explicit influence on the kinetic parameters, respectively. By adding minimal complexity to the existing ADM1, the incorporation of these phenomena may help to understand some underlying process issues that remain unexplained by the current model structure, broadening the scope of the model for control and monitoring industrial applications.
- 30 April 2022
- Published by MDPI AG in Microorganisms
- Vol. 10 (5) , 948
Open AccessComprehensive ADM1 Extensions to Tackle Some Operational and Metabolic Aspects in Anaerobic Digestion
Modelling in anaerobic digestion will play a crucial role as a tool for smart monitoring and supervision of the process performance and stability. By far, the Anaerobic Digestion Model No. 1 (ADM1) has been the most recognized and exploited model to represent this process. This study aims to propose simple extensions for the ADM1 model to tackle some overlooked operational and metabolic aspects. Extensions for the discontinuous feeding process, the reduction of the active working volume, the transport of the soluble compound from the bulk to the cell interior, and biomass acclimation are presented in this study. The model extensions are included by a change in the mass balance of the process in batch and continuous operation, the incorporation of a transfer equation governed by the gradient between the extra- and intra- cellular concentration, and a saturation-type function where the time has an explicit influence on the kinetic parameters, respectively. By adding minimal complexity to the existing ADM1, the incorporation of these phenomena may help to understand some underlying process issues that remain unexplained by the current model structure, broadening the scope of the model for control and monitoring industrial applications.
- Open Access
Markers for the Comparison of the Performances of Anoxic Biotrickling Filters in Biogas Desulphurisation: A Critical Review
The agriculture and livestock industry generate waste used in anaerobic digestion to produce biogas containing methane (CH4), useful in the generation of electricity and heat. However, although biogas is mainly composed of CH4 (~65%) and CO2 (~34%), among the 1% of other compounds present is hydrogen sulphide (H2S) which deteriorates engines and power generation fuel cells that use biogas, generating a foul smell and contaminating the environment. As a solution to this, anoxic biofiltration, specifically with biotrickling filters (BTFs), stands out in terms of the elimination of H2S as it is cost-effective, efficient, and more environmentally friendly than chemical solutions. Research on the topic is uneven in terms of presenting performance markers, underestimating many microbiological indicators. Research from the last decade was analyzed (2010–2020), demonstrating that only 56% of the reviewed publications did not report microbiological analysis related to sulphur oxidising bacteria (SOB), the most important microbial group in desulphurisation BTFs. This exposes fundamental deficiencies within this type of research and difficulties in comparing performance between research works. In this review, traditional and microbiological performance markers of anoxic biofiltration to remove H2S are described. Additionally, an analysis to assess the efficiency of anoxic BTFs for biogas desulphurisation is proposed in order to have a complete and uniform assessment for research in this field.
Open AccessMarkers for the Comparison of the Performances of Anoxic Biotrickling Filters in Biogas Desulphurisation: A Critical Review
The agriculture and livestock industry generate waste used in anaerobic digestion to produce biogas containing methane (CH4), useful in the generation of electricity and heat. However, although biogas is mainly composed of CH4 (~65%) and CO2 (~34%), among the 1% of other compounds present is hydrogen sulphide (H2S) which deteriorates engines and power generation fuel cells that use biogas, generating a foul smell and contaminating the environment. As a solution to this, anoxic biofiltration, specifically with biotrickling filters (BTFs), stands out in terms of the elimination of H2S as it is cost-effective, efficient, and more environmentally friendly than chemical solutions. Research on the topic is uneven in terms of presenting performance markers, underestimating many microbiological indicators. Research from the last decade was analyzed (2010–2020), demonstrating that only 56% of the reviewed publications did not report microbiological analysis related to sulphur oxidising bacteria (SOB), the most important microbial group in desulphurisation BTFs. This exposes fundamental deficiencies within this type of research and difficulties in comparing performance between research works. In this review, traditional and microbiological performance markers of anoxic biofiltration to remove H2S are described. Additionally, an analysis to assess the efficiency of anoxic BTFs for biogas desulphurisation is proposed in order to have a complete and uniform assessment for research in this field.
- Open Access
Copper-Polyurethane Composite Materials: Particle Size Effect on the Physical-Chemical and Antibacterial Properties
In this work, thermoplastic polyurethane (TPU) composites incorporated with 1.0 wt% Cu particles were synthesized by the melt blending method. The effect of the incorporated copper particle size on the antibacterial, thermal, rheological, and mechanical properties of TPU was investigated. The obtained results showed that (i) the addition of copper particles increased the thermal and mechanical properties because they acted as co-stabilizers of polyurethane (PU) (ii) copper nanoparticles decreased the viscosity of composite melts, and (iii) microparticles > 0.5 µm had a tendency to easily increase the maximum torque and formation of agglomerates. SEM micrographics showed that a good mixture between TPU and copper particles was obtained by the extrusion process. Additionally, copper-TPU composite materials effectively inhibited the growth of the Gram-negative Escherichia coli and the Gram-positive Staphylococcus aureus. Considering that the natural concentration of copper in the blood is in the range of 0.7–0.12 mg/L and that the total migration value of copper particles from TPU was 1000 times lower, the results suggested that TPU nanocomposites could be adequately employed for biomedical applications without a risk of contamination.
Open AccessCopper-Polyurethane Composite Materials: Particle Size Effect on the Physical-Chemical and Antibacterial Properties
In this work, thermoplastic polyurethane (TPU) composites incorporated with 1.0 wt% Cu particles were synthesized by the melt blending method. The effect of the incorporated copper particle size on the antibacterial, thermal, rheological, and mechanical properties of TPU was investigated. The obtained results showed that (i) the addition of copper particles increased the thermal and mechanical properties because they acted as co-stabilizers of polyurethane (PU) (ii) copper nanoparticles decreased the viscosity of composite melts, and (iii) microparticles > 0.5 µm had a tendency to easily increase the maximum torque and formation of agglomerates. SEM micrographics showed that a good mixture between TPU and copper particles was obtained by the extrusion process. Additionally, copper-TPU composite materials effectively inhibited the growth of the Gram-negative Escherichia coli and the Gram-positive Staphylococcus aureus. Considering that the natural concentration of copper in the blood is in the range of 0.7–0.12 mg/L and that the total migration value of copper particles from TPU was 1000 times lower, the results suggested that TPU nanocomposites could be adequately employed for biomedical applications without a risk of contamination.
- 2 July 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (9) , 095055
Effect of ultrasonic sonication time on the structural, optical and antibacterial properties of ceria nanostructures
By this work, we intended to understand the effect of ultrasonic sonication time on the structural and morphological properties of cerium oxide (ceria) nanoparticles. For comparison ceria nanoparticles synthesized by coprecipitation technique were considered. A series of controlled experiments were carried out to understand the crucial factors that inluenced the formation of ceria nanostructures under a determined sonication time. The average crystallite size and the microstrain were obtained from W-H analysis of the X-ray diffraction (XRD) data. The variation in the bandgap values was discussed with respect to the crystallite size. For antibacterial studies, two known bacteria Escherichia coli (ATCC 25922) and Staphylococcus aureus (ATCC 25923) were used. On E. coli, the prepared ceria showed bactericidal properties at 1000 (μg mL-1), ceria obtained by sonication for 30 min was bactericidal at 2000 (μg mL-1) and ceria made by sonication for 60 and 120 min were bactericidal at 3000 (μg mL-1). While on S. aureus all the experimental conditions showed bacterial death at 3000 (μg mL-1). The influence of the sonication time on the structural and antibacterial properties were discussed.
- 2 July 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (9) , 095055
Effect of ultrasonic sonication time on the structural, optical and antibacterial properties of ceria nanostructures
By this work, we intended to understand the effect of ultrasonic sonication time on the structural and morphological properties of cerium oxide (ceria) nanoparticles. For comparison ceria nanoparticles synthesized by coprecipitation technique were considered. A series of controlled experiments were carried out to understand the crucial factors that inluenced the formation of ceria nanostructures under a determined sonication time. The average crystallite size and the microstrain were obtained from W-H analysis of the X-ray diffraction (XRD) data. The variation in the bandgap values was discussed with respect to the crystallite size. For antibacterial studies, two known bacteria Escherichia coli (ATCC 25922) and Staphylococcus aureus (ATCC 25923) were used. On E. coli, the prepared ceria showed bactericidal properties at 1000 (μg mL-1), ceria obtained by sonication for 30 min was bactericidal at 2000 (μg mL-1) and ceria made by sonication for 60 and 120 min were bactericidal at 3000 (μg mL-1). While on S. aureus all the experimental conditions showed bacterial death at 3000 (μg mL-1). The influence of the sonication time on the structural and antibacterial properties were discussed.
- 1 July 2018
- Published by Elsevier in Bioresource Technology
- Vol. 260, 95-104
Modelling of an anaerobic plug-flow reactor. Process analysis and evaluation approaches with non-ideal mixing considerations
- 1 July 2018
- Published by Elsevier in Bioresource Technology
- Vol. 260, 95-104
Modelling of an anaerobic plug-flow reactor. Process analysis and evaluation approaches with non-ideal mixing considerations
- Open Access
- 1 January 2017
- Published by Elsevier in Electronic Journal of Biotechnology
- Vol. 25, 58-63
Characterization of a hyperthermophilic sulphur-oxidizing biofilm produced by archaea isolated from a hot spring
- 1 January 2017
- Published by Elsevier in Electronic Journal of Biotechnology
- Vol. 25, 58-63
Open AccessCharacterization of a hyperthermophilic sulphur-oxidizing biofilm produced by archaea isolated from a hot spring