Anna Zielińska-Lipiec
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Anna Zielińska-Lipiec has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Bogdan Rutkowski
AGH University of Krakow
2 shared publications - Małgorzata Grudzień-Rakoczy
Łukasiewicz Research Network-Kraków Institute of Technology, Kraków, Poland
2 shared publications - Rafał Cygan
Consolidated Precision Products Corporation, Investment Casting Division, Hetmańska 120, 35-078 Rzeszow, Poland
2 shared publications - Łukasz Rakoczy
AGH University of Krakow
2 shared publications - František Kromka
Institute of Materials Research, Slovak Academy of Sciences, Watsonova 47, 04001 Košice, Slovakia
1 shared publication - Joanna Kowalska
Faculty of Metals Engineering and Industrial Computer Science, AGH University of Krakow, Av. Mickiewicza 30, 30-059 Krakow, Poland
1 shared publication
Latest Publications
- Open Access
Microstructure and Texture Evolution of X85MnAl29-9 Steel During Aging
The research presented in this paper is part of a larger project concerning high-manganese alloys with different chemical compositions (mainly in manganese content from 21 to 31 wt.%). The presented examination results concern the analysis of the microstructure and textures in high-manganese X85MnAl29-9 steel, an age-hardenable steel, during aging at 550 °C for various times. X85MnAl29-9 steel was first hot rolled and subsequently cold rolled up to a 30% reduction. The samples were aged after deformation at 550 °C for various times in an argon atmosphere and cooled in air. The studies include X-ray phase analysis, texture measurement and observation of the microstructure by light microscopy, transmission electron microscopy (TEM) and scanning electron microscopy (SEM), as well as microhardness measurement. Research using scanning and transmission electron microscopy identified carbides in the analyzed samples. The results indicate that, when aging takes place, precipitation of κ′-carbide in an austenitic matrix and carbide κ at grain boundaries occurs. The appearance of satellites on diffraction patterns suggests that (Fe, Mn)3AlC nano-carbides are formed within the austenite matrix by a spinodal decomposition mechanism after the alloy is subjected to long-term aging, which is a key element for structure analysis in the design of safety systems. The use of shorter aging times (up to 24 h) leads to an increase in hardness caused by the precipitation of small κ′-carbide particles in the matrix. However, long aging times (100 h) lead to an increase in the precipitation of the carbide phase (κ and κ′), i.e., the steel becomes overage, which results in a decrease in hardness.
Open AccessMicrostructure and Texture Evolution of X85MnAl29-9 Steel During Aging
The research presented in this paper is part of a larger project concerning high-manganese alloys with different chemical compositions (mainly in manganese content from 21 to 31 wt.%). The presented examination results concern the analysis of the microstructure and textures in high-manganese X85MnAl29-9 steel, an age-hardenable steel, during aging at 550 °C for various times. X85MnAl29-9 steel was first hot rolled and subsequently cold rolled up to a 30% reduction. The samples were aged after deformation at 550 °C for various times in an argon atmosphere and cooled in air. The studies include X-ray phase analysis, texture measurement and observation of the microstructure by light microscopy, transmission electron microscopy (TEM) and scanning electron microscopy (SEM), as well as microhardness measurement. Research using scanning and transmission electron microscopy identified carbides in the analyzed samples. The results indicate that, when aging takes place, precipitation of κ′-carbide in an austenitic matrix and carbide κ at grain boundaries occurs. The appearance of satellites on diffraction patterns suggests that (Fe, Mn)3AlC nano-carbides are formed within the austenite matrix by a spinodal decomposition mechanism after the alloy is subjected to long-term aging, which is a key element for structure analysis in the design of safety systems. The use of shorter aging times (up to 24 h) leads to an increase in hardness caused by the precipitation of small κ′-carbide particles in the matrix. However, long aging times (100 h) lead to an increase in the precipitation of the carbide phase (κ and κ′), i.e., the steel becomes overage, which results in a decrease in hardness.
- Open Access
Analysis of γ′ Precipitates, Carbides and Nano-Borides in Heat-Treated Ni-Based Superalloy Using SEM, STEM-EDX, and HRSTEM
The microstructure of a René 108 Ni-based superalloy was systematically investigated by X-ray diffraction, light microscopy, energy-dispersive X-ray spectroscopy, and electron microscopy techniques. The material was investment cast in a vacuum and then solution treated (1200 °C-2h) and aged (900 °C-8h). The γ matrix is mainly strengthened by the ordered L12 γ′ phase, with the mean γ/γ′ misfit, δ, +0.6%. The typical dendritic microstructure with considerable microsegregation of the alloying elements is revealed. Dendritic regions consist of secondary and tertiary γ′ precipitates. At the interface of the matrix with secondary γ′ precipitates, nano M5B3 borides are present. In the interdendritic spaces additionally primary γ′ precipitates, MC and nano M23C6 carbides were detected. The γ′ precipitates are enriched in Al, Ta, Ti, and Hf, while channels of the matrix in Cr and Co. The highest summary concentration of γ′-formers occurs in coarse γ′ surrounding MC carbides. Borides M5B3 contain mostly W, Cr and Mo. All of MC carbides are enriched strongly in Hf and Ta, with the concentration relationship between these and other strong carbide formers depending on the precipitate’s morphology. The nano M23C6 carbides enriched in Cr have been formed as a consequence of phase transformation MC + γ → M23C6 + γ′ during the ageing treatment.
Open AccessAnalysis of γ′ Precipitates, Carbides and Nano-Borides in Heat-Treated Ni-Based Superalloy Using SEM, STEM-EDX, and HRSTEM
The microstructure of a René 108 Ni-based superalloy was systematically investigated by X-ray diffraction, light microscopy, energy-dispersive X-ray spectroscopy, and electron microscopy techniques. The material was investment cast in a vacuum and then solution treated (1200 °C-2h) and aged (900 °C-8h). The γ matrix is mainly strengthened by the ordered L12 γ′ phase, with the mean γ/γ′ misfit, δ, +0.6%. The typical dendritic microstructure with considerable microsegregation of the alloying elements is revealed. Dendritic regions consist of secondary and tertiary γ′ precipitates. At the interface of the matrix with secondary γ′ precipitates, nano M5B3 borides are present. In the interdendritic spaces additionally primary γ′ precipitates, MC and nano M23C6 carbides were detected. The γ′ precipitates are enriched in Al, Ta, Ti, and Hf, while channels of the matrix in Cr and Co. The highest summary concentration of γ′-formers occurs in coarse γ′ surrounding MC carbides. Borides M5B3 contain mostly W, Cr and Mo. All of MC carbides are enriched strongly in Hf and Ta, with the concentration relationship between these and other strong carbide formers depending on the precipitate’s morphology. The nano M23C6 carbides enriched in Cr have been formed as a consequence of phase transformation MC + γ → M23C6 + γ′ during the ageing treatment.
- Open Access
Characterization of γ′ Precipitates in Cast Ni-Based Superalloy and Their Behaviour at High-Homologous Temperatures Studied by TEM and in Situ XRD
In situ X-ray diffraction and transmission electron microscopy has been used to investigate René 108 Ni-based superalloy after short-term annealing at high-homologous temperatures. Current work is focused on characterisation of γ′ precipitates, their volume fraction, evolution of the lattice parameter of γ and γ′ phases and misfit parameter of γ′ in the matrix. Material in the initial condition is characterised by a high-volume fraction (over 63%) of γ′ precipitates. Irregular distribution of alloying elements was observed. Matrix channels were strongly enriched in Cr, Co, W and Mo, whereas precipitates contain large amount of Al, Ti, Ta and Hf. Exposure to high-homologous temperatures in the range 1100–1250 °C led to the dissolution of the precipitates, which influenced the change of lattice parameter of both γ and γ′ phases. The lattice parameter of the matrix continuously grew during holding at high temperatures, which had a dominant influence on the more negative misfit coefficient.
Open AccessCharacterization of γ′ Precipitates in Cast Ni-Based Superalloy and Their Behaviour at High-Homologous Temperatures Studied by TEM and in Situ XRD
In situ X-ray diffraction and transmission electron microscopy has been used to investigate René 108 Ni-based superalloy after short-term annealing at high-homologous temperatures. Current work is focused on characterisation of γ′ precipitates, their volume fraction, evolution of the lattice parameter of γ and γ′ phases and misfit parameter of γ′ in the matrix. Material in the initial condition is characterised by a high-volume fraction (over 63%) of γ′ precipitates. Irregular distribution of alloying elements was observed. Matrix channels were strongly enriched in Cr, Co, W and Mo, whereas precipitates contain large amount of Al, Ti, Ta and Hf. Exposure to high-homologous temperatures in the range 1100–1250 °C led to the dissolution of the precipitates, which influenced the change of lattice parameter of both γ and γ′ phases. The lattice parameter of the matrix continuously grew during holding at high temperatures, which had a dominant influence on the more negative misfit coefficient.