Liqiong Tang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Liqiong Tang has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Subhas Chandra Mukhopadhyay
Macquarie University
4 shared publications - Nguyen Thi Phuoc Van
Massey University
3 shared publications - Alex Wishart
Institute of Technology and Engineering, Massey University, Palmerston North, New Zealand
2 shared publications - Duc Minh Nguyen
School of Electronics and Telecommunications, Hanoi University of Science and Technology, Hanoi 100000, Vietnam
2 shared publications - Kieran Orchard
Institute of Technology and Engineering, Massey University, Palmerston North, New Zealand
2 shared publications - Syed Faraz Hasan
Department of Mechanical and Electrical Engineering Massey University New Zealand
2 shared publications
Latest Publications
- Open Access
Review-Microwave Radar Sensing Systems for Search and Rescue Purposes
This paper presents a survey of recent developments using Doppler radar sensor in searching and locating an alive person under debris or behind a wall. Locating a human and detecting the vital signs such as breathing rate and heartbeat using a microwave sensor is a non-invasive technique. Recently, many hardware structures, signal processing approaches, and integrated systems have been introduced by researchers in this field. The purpose is to enhance the accuracy of vital signs’ detection and location detection and reduce energy consumption. This work concentrates on the representative research on sensing systems that can find alive people under rubble when an earthquake or other disasters occur. In this paper, various operating principles and system architectures for finding survivors using the microwave radar sensors are reviewed. A comparison between these systems is also discussed.
Open AccessReview-Microwave Radar Sensing Systems for Search and Rescue Purposes
This paper presents a survey of recent developments using Doppler radar sensor in searching and locating an alive person under debris or behind a wall. Locating a human and detecting the vital signs such as breathing rate and heartbeat using a microwave sensor is a non-invasive technique. Recently, many hardware structures, signal processing approaches, and integrated systems have been introduced by researchers in this field. The purpose is to enhance the accuracy of vital signs’ detection and location detection and reduce energy consumption. This work concentrates on the representative research on sensing systems that can find alive people under rubble when an earthquake or other disasters occur. In this paper, various operating principles and system architectures for finding survivors using the microwave radar sensors are reviewed. A comparison between these systems is also discussed.
- 25 August 2018
- Published by Springer Nature
- p. 47-62
Wide Band Antennae System for Remote Vital Signs Detecting Doppler Radar Sensor
- 25 August 2018
- Published by Springer Nature
- p. 47-62
Wide Band Antennae System for Remote Vital Signs Detecting Doppler Radar Sensor
- Open Access
Probabilities of False Alarm for Vital Sign Detection on the Basis of a Doppler Radar System
Vital detection on the basis of Doppler radars has drawn a great deal of attention from researchers because of its high potential for applications in biomedicine, surveillance, and finding people alive under debris during natural hazards. In this research, the signal-to-noise ratio (SNR) of the remote vital-sign detection system is investigated. On the basis of different types of noise, such as phase noise, Gaussian noise, leakage noise between the transmitting and receiving antennae, and so on, the SNR of the system has first been examined. Then the research has focused on the investigation of the detection and false alarm probabilities of the system when the transmission link between the human and the radar sensor system took the Nakagami-m channel model. The analytical model for the false alarm and the detection probabilities of the system have been derived. The proposed theoretical models for the SNR and detection probability match with the simulation and measurement results. These theoretical models have the potential to be used as good references for the hardware development of the vital-sign detection radar sensor system.
Open AccessProbabilities of False Alarm for Vital Sign Detection on the Basis of a Doppler Radar System
Vital detection on the basis of Doppler radars has drawn a great deal of attention from researchers because of its high potential for applications in biomedicine, surveillance, and finding people alive under debris during natural hazards. In this research, the signal-to-noise ratio (SNR) of the remote vital-sign detection system is investigated. On the basis of different types of noise, such as phase noise, Gaussian noise, leakage noise between the transmitting and receiving antennae, and so on, the SNR of the system has first been examined. Then the research has focused on the investigation of the detection and false alarm probabilities of the system when the transmission link between the human and the radar sensor system took the Nakagami-m channel model. The analytical model for the false alarm and the detection probabilities of the system have been derived. The proposed theoretical models for the SNR and detection probability match with the simulation and measurement results. These theoretical models have the potential to be used as good references for the hardware development of the vital-sign detection radar sensor system.
- 29 November 2017
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 10 (1) , 014502
A Novel Robotic Tree Climbing Mechanism With Anti-Falling Functionality for Tree Pruning
This paper presents a novel mechanism of tree climbing robotic system for tree pruning. The unique features of this system include the passive and active anti-falling mechanisms, which prevent the robot from falling to the ground under either static or dynamic situations, the capability to vertically or spirally climb up a tree trunk, and the flexibility to suit different trunk sizes. The computer-aided design (CAD) models of the robotic mechanism, static and kinematic analysis, climbing simulation, and testing of the physical model are stated in detail. This research work reveals that this novel tree climbing mechanism can be served as a platform for tree pruning robot.
- 29 November 2017
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 10 (1) , 014502
A Novel Robotic Tree Climbing Mechanism With Anti-Falling Functionality for Tree Pruning
This paper presents a novel mechanism of tree climbing robotic system for tree pruning. The unique features of this system include the passive and active anti-falling mechanisms, which prevent the robot from falling to the ground under either static or dynamic situations, the capability to vertically or spirally climb up a tree trunk, and the flexibility to suit different trunk sizes. The computer-aided design (CAD) models of the robotic mechanism, static and kinematic analysis, climbing simulation, and testing of the physical model are stated in detail. This research work reveals that this novel tree climbing mechanism can be served as a platform for tree pruning robot.
- 1 July 2013
- Published by IGI Global Scientific Publishing in International Journal of Intelligent Mechatronics and Robotics
- Vol. 3 (3) , 60-76
Rolling Prevention Mechanism for Underground Pipe Erosion Inspection Robot with a Real Time Vision System
Pipe inspection is one of the areas that have attracted high research interest for robot applications especially in oil and chemical industry and civil engineering. Robot body rolling while it travels within a pipe has been a problem for accurately collecting inspection data. Under certain circumstances where vision systems have to be employed, robot body rolling may cause vision inspection data to have little value as it is difficult to know where exactly the camera was looking at. This paper proposes an anti-rolling mechanism to hold consistent camera orientation. By changing the position angle of the robot legs, the mechanism is able to adjust the resistance to rolling within a pipe, therefore preventing robot rolling happening. The design makes use of the friction force caused by the gravity force of the robot to prevent the robot body rolling. The design analysis quantifies the effect of pipe radius, robot weight, payload, and payload offset distance in robot rolling. A test model was built based on the design concept. The experimental results obtained from the test model match the predication of the computational analysis. A real time vision system has been developed using FPGA and the algorithm of the structured laser light stripe configuration in the context of pipe inspection. The real-time hardware implementation of the algorithms on the robot itself removes the need to transmit raw video data back to an operator.
- 1 July 2013
- Published by IGI Global Scientific Publishing in International Journal of Intelligent Mechatronics and Robotics
- Vol. 3 (3) , 60-76
Rolling Prevention Mechanism for Underground Pipe Erosion Inspection Robot with a Real Time Vision System
Pipe inspection is one of the areas that have attracted high research interest for robot applications especially in oil and chemical industry and civil engineering. Robot body rolling while it travels within a pipe has been a problem for accurately collecting inspection data. Under certain circumstances where vision systems have to be employed, robot body rolling may cause vision inspection data to have little value as it is difficult to know where exactly the camera was looking at. This paper proposes an anti-rolling mechanism to hold consistent camera orientation. By changing the position angle of the robot legs, the mechanism is able to adjust the resistance to rolling within a pipe, therefore preventing robot rolling happening. The design makes use of the friction force caused by the gravity force of the robot to prevent the robot body rolling. The design analysis quantifies the effect of pipe radius, robot weight, payload, and payload offset distance in robot rolling. A test model was built based on the design concept. The experimental results obtained from the test model match the predication of the computational analysis. A real time vision system has been developed using FPGA and the algorithm of the structured laser light stripe configuration in the context of pipe inspection. The real-time hardware implementation of the algorithms on the robot itself removes the need to transmit raw video data back to an operator.
- 1 November 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Microcontroller-Based Autonomous Light Craft
This Paper presents the development of a light craft powered by a 1.3 KW methanol engine and controlled by a Cygnal 8051F020 microcontroller. The design of the light craft has a simple mechanical structure with easy control features. Fuzzy logic is incorporated in the control system to realize the intelligent control. The main characteristics of the craft are discussed in the paper. In addition to the functionality, flight modes, mechanical and control aspects, it also discusses the development of the control system based on a pair of microcontrollers.
- 1 November 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Microcontroller-Based Autonomous Light Craft
This Paper presents the development of a light craft powered by a 1.3 KW methanol engine and controlled by a Cygnal 8051F020 microcontroller. The design of the light craft has a simple mechanical structure with easy control features. Fuzzy logic is incorporated in the control system to realize the intelligent control. The main characteristics of the craft are discussed in the paper. In addition to the functionality, flight modes, mechanical and control aspects, it also discusses the development of the control system based on a pair of microcontrollers.
- 1 November 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Unmanned Light Craft Balance System Using Fuzzy Logic Control
This paper presents an approach to the control of an unmanned light aircraft. The light craft has similar properties to a helicopter. It is fundamentally unstable and with highly nonlinear dynamics. A control system is required to control, compensate, and balance the craft when there is a change on load capacities, disturbances, and environmental conditions. A fuzzy logic control system based on a microcontroller was developed to realize a light craft flight controller.
- 1 November 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Unmanned Light Craft Balance System Using Fuzzy Logic Control
This paper presents an approach to the control of an unmanned light aircraft. The light craft has similar properties to a helicopter. It is fundamentally unstable and with highly nonlinear dynamics. A control system is required to control, compensate, and balance the craft when there is a change on load capacities, disturbances, and environmental conditions. A fuzzy logic control system based on a microcontroller was developed to realize a light craft flight controller.