Paolo Badalà
Research Subjects
Paolo Badalà has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Alessandra Alberti
CNR-IMM
3 shared publications - Anna Bassi
STMicroelectronics, Zona Industriale Stradale Primosole 50, 95121 Catania, Italy
3 shared publications - Antonino La Magna
Istituto per la Microelettronica e Microsistemi, National Research Council of Italy, 95121 Catania, Italy
3 shared publications - Corrado Bongiorno
CNR-IMM
2 shared publications - Gabriele Bellocchi
STMicroelectronics
2 shared publications - Salvatore Sanzaro
STMicroelectronics
2 shared publications
Latest Publications
- Open Access
- 20 May 2026
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1192, 81-87
Ni Si Alloy/4H-SiC Reaction and Silicide Formation under Excimer Laser Annealing for Ohmic Contact
Laser annealing is considered an enabling process for a new generation of SiC power devices, since it allows the formation of ohmic contacts on very thin wafers, significantly reducing their total ON resistance. Ni silicide and Ti silicide ohmic contacts have been widely investigated and reported in literature, exploring in detail the role of laser features, metal thickness and thinning process. Nevertheless, adding a small amount of Si to the contact layer could represent an opportunity to increase process options. In this work, a NiSi alloy has been used as a contact metal to study the role of the addition of Si to Ni in the reaction process under UV laser irradiation. Morphological and structural properties of the reacted layers have been investigated by means of Transmission Electron Microscopy (TEM) and X-Ray Diffraction (XRD) analyses. The electrical characterization of reacted contacts has been performed by measuring their Sheet Resistance (R s ) by Four Point Probe (FPP) method and, at device level, by measuring the forward voltage drop (V f ) of Schottky Barrier Diodes (SBDs) fabricated on 150 mm-diameter 4H-SiC wafers. Furthermore, a comparison has been made between Ni and NiSi alloy under the same irradiation conditions. It has been found that adding Si to Ni in the contact metal layer moves the silicide reaction forward, driving the strong relationship observed between structural, morphological and electrical properties of the reacted contacts.
- 20 May 2026
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1192, 81-87
Open AccessNi Si Alloy/4H-SiC Reaction and Silicide Formation under Excimer Laser Annealing for Ohmic Contact
Laser annealing is considered an enabling process for a new generation of SiC power devices, since it allows the formation of ohmic contacts on very thin wafers, significantly reducing their total ON resistance. Ni silicide and Ti silicide ohmic contacts have been widely investigated and reported in literature, exploring in detail the role of laser features, metal thickness and thinning process. Nevertheless, adding a small amount of Si to the contact layer could represent an opportunity to increase process options. In this work, a NiSi alloy has been used as a contact metal to study the role of the addition of Si to Ni in the reaction process under UV laser irradiation. Morphological and structural properties of the reacted layers have been investigated by means of Transmission Electron Microscopy (TEM) and X-Ray Diffraction (XRD) analyses. The electrical characterization of reacted contacts has been performed by measuring their Sheet Resistance (R s ) by Four Point Probe (FPP) method and, at device level, by measuring the forward voltage drop (V f ) of Schottky Barrier Diodes (SBDs) fabricated on 150 mm-diameter 4H-SiC wafers. Furthermore, a comparison has been made between Ni and NiSi alloy under the same irradiation conditions. It has been found that adding Si to Ni in the contact metal layer moves the silicide reaction forward, driving the strong relationship observed between structural, morphological and electrical properties of the reacted contacts.
- Open Access
- 22 August 2024
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 359, 97-103
Electrical and Structural Properties of Ohmic Contacts of SiC Diodes Fabricated on Thin Wafers
New generations of SiC power devices require to be fabricated on very thin substrates, in order to significantly reduce the series resistance of the device. The role of thinning process on the formation of backside ohmic contact has been investigated in this work. Three different mechanical grinding processes have been adopted, resulting in different amounts of defectivity and surface roughness values. An excimer UV laser has been used to form a Ni-silicide based ohmic contact on the backside of the wafers. The reacted layer has been studied by means of Atomic Force Microscopy (AFM), Transmission Electron Microscopy (TEM) and X-Ray Diffraction (XRD) analyses, as a function of grinding process parameters and laser annealing conditions. The ohmic contact has been evaluated by measuring the Sheet Resistance (Rs) of silicided layers and the Vf at nominal current of Schottky Barrier Diode (SBD) devices, fabricated on 150 mm-diameter 4H-SiC wafers. A strong relationship has been found between the crystal damage, induced by thinning process, and the structural, morphological and electrical properties of silicided ohmic contact, formed by UV laser annealing, revealing that the silicide reaction is moved forward, at fixed annealing conditions, by the increasing of crystal defectivity and surface roughness of SiC.
- 22 August 2024
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 359, 97-103
Open AccessElectrical and Structural Properties of Ohmic Contacts of SiC Diodes Fabricated on Thin Wafers
New generations of SiC power devices require to be fabricated on very thin substrates, in order to significantly reduce the series resistance of the device. The role of thinning process on the formation of backside ohmic contact has been investigated in this work. Three different mechanical grinding processes have been adopted, resulting in different amounts of defectivity and surface roughness values. An excimer UV laser has been used to form a Ni-silicide based ohmic contact on the backside of the wafers. The reacted layer has been studied by means of Atomic Force Microscopy (AFM), Transmission Electron Microscopy (TEM) and X-Ray Diffraction (XRD) analyses, as a function of grinding process parameters and laser annealing conditions. The ohmic contact has been evaluated by measuring the Sheet Resistance (Rs) of silicided layers and the Vf at nominal current of Schottky Barrier Diode (SBD) devices, fabricated on 150 mm-diameter 4H-SiC wafers. A strong relationship has been found between the crystal damage, induced by thinning process, and the structural, morphological and electrical properties of silicided ohmic contact, formed by UV laser annealing, revealing that the silicide reaction is moved forward, at fixed annealing conditions, by the increasing of crystal defectivity and surface roughness of SiC.
- Open Access
Simulations of the Ultra-Fast Kinetics in Ni-Si-C Ternary Systems under Laser Irradiation
We present a method for the simulation of the kinetic evolution in the sub µs timescale for composite materials containing regions occupied by alloys, compounds, and mixtures belonging to the Ni-Si-C ternary system. Pulsed laser irradiation (pulses of the order of 100 ns) promotes this evolution. The simulation approach is formulated in the framework of the phase-field theory and it consists of a system of coupled non-linear partial differential equations (PDEs), which considers as variables the following fields: the laser electro-magnetic field, the temperature, the phase-field and the material (Ni, Si, C, C clusters and Ni-silicides) densities. The model integrates a large set of materials and reaction parameters which could also self-consistently depend on the model variables. A parameter calibration is also proposed, specifically suited for the wavelength of a widely used class of excimer lasers (λ = 308 nm). The model is implemented on a proprietary laser annealing technology computer-aided design (TCAD) tool based on the finite element method (FEM). This integration allows, in principle, numerical solutions in systems of any dimension. Here we discuss the complex simulation trend in the one-dimensional case, considering as a starting state, thin films on 4H-SiC substrates, i.e., a configuration reproducing a technologically relevant case study. Simulations as a function of the laser energy density show an articulated scenario, also induced by the variables’ dependency of the materials’ parameters, for the non-melting, partial-melting and full-melting process conditions. The simulation results are validated by post-process experimental analyses of the microstructure and composition of the irradiated samples.
Open AccessSimulations of the Ultra-Fast Kinetics in Ni-Si-C Ternary Systems under Laser Irradiation
We present a method for the simulation of the kinetic evolution in the sub µs timescale for composite materials containing regions occupied by alloys, compounds, and mixtures belonging to the Ni-Si-C ternary system. Pulsed laser irradiation (pulses of the order of 100 ns) promotes this evolution. The simulation approach is formulated in the framework of the phase-field theory and it consists of a system of coupled non-linear partial differential equations (PDEs), which considers as variables the following fields: the laser electro-magnetic field, the temperature, the phase-field and the material (Ni, Si, C, C clusters and Ni-silicides) densities. The model integrates a large set of materials and reaction parameters which could also self-consistently depend on the model variables. A parameter calibration is also proposed, specifically suited for the wavelength of a widely used class of excimer lasers (λ = 308 nm). The model is implemented on a proprietary laser annealing technology computer-aided design (TCAD) tool based on the finite element method (FEM). This integration allows, in principle, numerical solutions in systems of any dimension. Here we discuss the complex simulation trend in the one-dimensional case, considering as a starting state, thin films on 4H-SiC substrates, i.e., a configuration reproducing a technologically relevant case study. Simulations as a function of the laser energy density show an articulated scenario, also induced by the variables’ dependency of the materials’ parameters, for the non-melting, partial-melting and full-melting process conditions. The simulation results are validated by post-process experimental analyses of the microstructure and composition of the irradiated samples.
- Open Access
- 21 July 2021
- Published by MDPI AG in Micromachines
- Vol. 12 (8) , 849
Morphological and Compositional Studies on Al/Ti/TiN/Si, Al/TiN/Si, Al/W/Si, Al/WN/Si Systems to Test the Diffusion Barrier Properties of Nanoscale-Thick Layers between Al and Si
In this work, an investigation of the properties of nanoscale-thick Ti/TiN, TiN, W, WN layers as diffusion barriers between Si and Al is carried out in view of Si-based electronic applications. Heat treatments were performed on the samples to activate interdiffusion between Si and Al. Changing annealing time and temperature, each sample was morphologically characterized by scanning electron microscopy and atomic force microscopy and compositionally characterized by Rutherford backscattering analysis. The aim is to evaluate the efficiency of the layers as diffusion barriers between Si and Al and, at the same time, to evaluate the surface morphological changes upon annealing processes.
- 21 July 2021
- Published by MDPI AG in Micromachines
- Vol. 12 (8) , 849
Open AccessMorphological and Compositional Studies on Al/Ti/TiN/Si, Al/TiN/Si, Al/W/Si, Al/WN/Si Systems to Test the Diffusion Barrier Properties of Nanoscale-Thick Layers between Al and Si
In this work, an investigation of the properties of nanoscale-thick Ti/TiN, TiN, W, WN layers as diffusion barriers between Si and Al is carried out in view of Si-based electronic applications. Heat treatments were performed on the samples to activate interdiffusion between Si and Al. Changing annealing time and temperature, each sample was morphologically characterized by scanning electron microscopy and atomic force microscopy and compositionally characterized by Rutherford backscattering analysis. The aim is to evaluate the efficiency of the layers as diffusion barriers between Si and Al and, at the same time, to evaluate the surface morphological changes upon annealing processes.
- 25 November 2013
- Published by Wiley in physica status solidi (c)
- Vol. 11 (1) , 160-163
Structural characterization of in‐situ silicided contacts textured on p‐type [001] silicon
Nickel silicide is widely used to realize contact terminals of integrated circuits and is usually formed by ex‐situ heating treatments. In‐situ reactions during sputter deposition of a Ni layer onto a HF p‐type [001] Si substrate have been investigated in this work, by means of transmission electron microscopy, X‐ray diffraction and X‐ray reflectivity analyses. A thin layer of polycrystalline silicide, with extremely flat interfaces and in fiber texture with the Si substrate, has been obtained by introducing a sputter etching step just before Ni deposition and properly modulating its duration. The work has also been aimed to decouple the thermal impact of sputter etching from its effect on surface cleaning, disclosing its key role in the whole reaction process.
- 25 November 2013
- Published by Wiley in physica status solidi (c)
- Vol. 11 (1) , 160-163
Structural characterization of in‐situ silicided contacts textured on p‐type [001] silicon
Nickel silicide is widely used to realize contact terminals of integrated circuits and is usually formed by ex‐situ heating treatments. In‐situ reactions during sputter deposition of a Ni layer onto a HF p‐type [001] Si substrate have been investigated in this work, by means of transmission electron microscopy, X‐ray diffraction and X‐ray reflectivity analyses. A thin layer of polycrystalline silicide, with extremely flat interfaces and in fiber texture with the Si substrate, has been obtained by introducing a sputter etching step just before Ni deposition and properly modulating its duration. The work has also been aimed to decouple the thermal impact of sputter etching from its effect on surface cleaning, disclosing its key role in the whole reaction process.