Jarmo Verho
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jarmo Verho has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Jukka Lekkala
BioMediTech Institute and Faculty of Biomedical Sciences and Engineering, Tampere University of Technology, Tampere, FINLAND
7 shared publications - Antti Vehkaoja
Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland
4 shared publications - J. Makiranta
Inst. of Meas. & Inf. Technol., Tampere Univ. of Technol., Finland
2 shared publications - Mikko Peltokangas
Tampere University of Technology
2 shared publications - N. Matintupa
Department of Biochemistry, University of Jyväskylä, Jyväskylä, Finland
2 shared publications - Andrei Jakab
Department of Electronics and Communications Engineering, Tampere University of Technology, Korkeakoulunkatu 3, FI-33720 Tampere, Finland
1 shared publication
Latest Publications
- 28 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Biomedical and Health Informatics
- Vol. 23 (3) , 1058-1065
Effects of Percutaneous Transluminal Angioplasty of Superficial Femoral Artery on Photoplethysmographic Pulse Transit Times
We analyze the changes in upper and lower limb pulse transit times (PTT) caused by peripheral artery disease (PAD) and its treatment with percutaneous transluminal angioplasty (PTA) of the superficial femoral artery. PTTs were extracted from the photoplethysmograms (PPG) recorded from an index finger and 2nd toes. PTTs were defined between the R-peaks of the ECG and different reference points of the (PPG): foot and peak points, maxima of 1st and 2nd derivative, and by means of intersecting tangents method. Also the PTTs between the toe and finger pulses were analyzed. Our sample consists of 24 subjects examined before and after the PTA and in 1-month follow-up visit. Also 28 older than 65 years controls having normal ankle-to-brachial pressure index (ABI) and no history in cardiovascular diseases as well as 21 younger subjects were examined. The differences between the groups and pre- and post-treatment phases were analyzed by means of non-parametric statistical tests. The changes in the PTTs of upper limb and non-treated lower limb were negligible. The agreement with the reference values, ABI and toe pressures, was studied by kappa-analysis, resulting in kappa-values of 0.33$\times$0.91. Differences in PTTs were found between pre-treatment state of the treated limb, post-treatment state and the follow-up visit, as well as between the pre-treatment state and controls. If patients' age and systolic blood pressure were taken into consideration, the method of lower limb PTT calculation from the peak point turns out feasible in finding the markers of PAD and monitoring post- treatment vascular remodellation.
- 28 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Biomedical and Health Informatics
- Vol. 23 (3) , 1058-1065
Effects of Percutaneous Transluminal Angioplasty of Superficial Femoral Artery on Photoplethysmographic Pulse Transit Times
We analyze the changes in upper and lower limb pulse transit times (PTT) caused by peripheral artery disease (PAD) and its treatment with percutaneous transluminal angioplasty (PTA) of the superficial femoral artery. PTTs were extracted from the photoplethysmograms (PPG) recorded from an index finger and 2nd toes. PTTs were defined between the R-peaks of the ECG and different reference points of the (PPG): foot and peak points, maxima of 1st and 2nd derivative, and by means of intersecting tangents method. Also the PTTs between the toe and finger pulses were analyzed. Our sample consists of 24 subjects examined before and after the PTA and in 1-month follow-up visit. Also 28 older than 65 years controls having normal ankle-to-brachial pressure index (ABI) and no history in cardiovascular diseases as well as 21 younger subjects were examined. The differences between the groups and pre- and post-treatment phases were analyzed by means of non-parametric statistical tests. The changes in the PTTs of upper limb and non-treated lower limb were negligible. The agreement with the reference values, ABI and toe pressures, was studied by kappa-analysis, resulting in kappa-values of 0.33$\times$0.91. Differences in PTTs were found between pre-treatment state of the treated limb, post-treatment state and the follow-up visit, as well as between the pre-treatment state and controls. If patients' age and systolic blood pressure were taken into consideration, the method of lower limb PTT calculation from the peak point turns out feasible in finding the markers of PAD and monitoring post- treatment vascular remodellation.
- 30 May 2018
- Published by Springer Nature in IFMBE Proceedings
- p. 183-187
TangoTM Wellness Motivator for Supporting Permanent Lifestyle Change
- 30 May 2018
- Published by Springer Nature in IFMBE Proceedings
- p. 183-187
TangoTM Wellness Motivator for Supporting Permanent Lifestyle Change
- 21 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 15 (2) , 420-429
Indirect Temperature Measurement and Control Method for Cell Culture Devices
Microfluidic devices are promising tools with which to create an environment that mimics a cell's natural microenvironment more closely than traditional macroscopic cell culture approaches. In these devices, temperature is one of the most important environmental factors to monitor and control. However, direct temperature measurement at the cell area can disturb cell growth and potentially prevent optical monitoring, and is typically difficult to implement. On the other hand, indirect measurement could overcome these challenges. Therefore, using the system identification method, we have developed models to estimate the cell area temperature from external measurements without interfering cells. In order to validate the proposed models, we performed large sets of experiments. The results show that the models are able to catch the dynamics of temperature in a desired area with a high level of accuracy, which means that indirect temperature measurement using the model can be implemented in the future cell culture studies. The usefulness of the model is also demonstrated by simulations that use estimated temperature as a feedback signal in a closed-loop system. We also present tuning of a model-based controller and a noise study, which shows that the tuned controller is robust for typical ambient room temperature variations.
- 21 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 15 (2) , 420-429
Indirect Temperature Measurement and Control Method for Cell Culture Devices
Microfluidic devices are promising tools with which to create an environment that mimics a cell's natural microenvironment more closely than traditional macroscopic cell culture approaches. In these devices, temperature is one of the most important environmental factors to monitor and control. However, direct temperature measurement at the cell area can disturb cell growth and potentially prevent optical monitoring, and is typically difficult to implement. On the other hand, indirect measurement could overcome these challenges. Therefore, using the system identification method, we have developed models to estimate the cell area temperature from external measurements without interfering cells. In order to validate the proposed models, we performed large sets of experiments. The results show that the models are able to catch the dynamics of temperature in a desired area with a high level of accuracy, which means that indirect temperature measurement using the model can be implemented in the future cell culture studies. The usefulness of the model is also demonstrated by simulations that use estimated temperature as a feedback signal in a closed-loop system. We also present tuning of a model-based controller and a noise study, which shows that the tuned controller is robust for typical ambient room temperature variations.
- Open Access
- 1 January 2014
- Published by Springer Nature in BioMedical Engineering OnLine
- Vol. 13 (1) , 60
Novel wireless electroencephalography system with a minimal preparation time for use in emergencies and prehospital care
Although clinical applications such as emergency medicine and prehospital care could benefit from a fast-mounting electroencephalography (EEG) recording system, the lack of specifically designed equipment restricts the use of EEG in these environments. This paper describes the design and testing of a six-channel emergency EEG (emEEG) system with a rapid preparation time intended for use in emergency medicine and prehospital care. The novel system comprises a quick-application cap, a device for recording and transmitting the EEG wirelessly to a computer, and custom software for displaying and streaming the data in real-time to a hospital. Bench testing was conducted, as well as healthy volunteer and patient measurements in three different environments: a hospital EEG laboratory, an intensive care unit, and an ambulance. The EEG data was evaluated by two experienced clinical neurophysiologists and compared with recordings from a commercial system. The bench tests demonstrated that the emEEG system's performance is comparable to that of a commercial system while the healthy volunteer and patient measurements confirmed that the system can be applied quickly and that it records quality EEG data in a variety of environments. Furthermore, the recorded data was judged to be of diagnostic quality by two experienced clinical neurophysiologists. In the future, the emEEG system may be used to record high-quality EEG data in emergency medicine and during ambulance transportation. Its use could lead to a faster diagnostic, a more accurate treatment, and a shorter recovery time for patients with neurological brain disorders.
- 1 January 2014
- Published by Springer Nature in BioMedical Engineering OnLine
- Vol. 13 (1) , 60
Open AccessNovel wireless electroencephalography system with a minimal preparation time for use in emergencies and prehospital care
Although clinical applications such as emergency medicine and prehospital care could benefit from a fast-mounting electroencephalography (EEG) recording system, the lack of specifically designed equipment restricts the use of EEG in these environments. This paper describes the design and testing of a six-channel emergency EEG (emEEG) system with a rapid preparation time intended for use in emergency medicine and prehospital care. The novel system comprises a quick-application cap, a device for recording and transmitting the EEG wirelessly to a computer, and custom software for displaying and streaming the data in real-time to a hospital. Bench testing was conducted, as well as healthy volunteer and patient measurements in three different environments: a hospital EEG laboratory, an intensive care unit, and an ambulance. The EEG data was evaluated by two experienced clinical neurophysiologists and compared with recordings from a commercial system. The bench tests demonstrated that the emEEG system's performance is comparable to that of a commercial system while the healthy volunteer and patient measurements confirmed that the system can be applied quickly and that it records quality EEG data in a variety of environments. Furthermore, the recorded data was judged to be of diagnostic quality by two experienced clinical neurophysiologists. In the future, the emEEG system may be used to record high-quality EEG data in emergency medicine and during ambulance transportation. Its use could lead to a faster diagnostic, a more accurate treatment, and a shorter recovery time for patients with neurological brain disorders.
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE) in 2018 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC)
- Vol. 2006 (1557170X) , 2049-2052
Miniature Wireless Measurement Node for ECG Signal Transmission in Home Area Network
A miniature wireless node for ECG measurements is presented. The ECG node is designed to be used in various applications including measurement of heart rate during physical exercise and continuous long term measurement of ECG for people assumed having, or being recovering from a cardiac disease. The ECG node is wirelessly connected to a computer using IEEE 802.15.4 based radio protocol. The device sends the measured ECG signal together with additional measurement parameters including battery voltage to the computer, where the ECG signal can be analyzed on-line. The ECG node can operate alone or it can be used as a part of an overall system being designed for monitoring people that are transferred from hospital to home treatment
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE) in 2018 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC)
- Vol. 2006 (1557170X) , 2049-2052
Miniature Wireless Measurement Node for ECG Signal Transmission in Home Area Network
A miniature wireless node for ECG measurements is presented. The ECG node is designed to be used in various applications including measurement of heart rate during physical exercise and continuous long term measurement of ECG for people assumed having, or being recovering from a cardiac disease. The ECG node is wirelessly connected to a computer using IEEE 802.15.4 based radio protocol. The device sends the measured ECG signal together with additional measurement parameters including battery voltage to the computer, where the ECG signal can be analyzed on-line. The ECG node can operate alone or it can be used as a part of an overall system being designed for monitoring people that are transferred from hospital to home treatment
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2006 (1557170X) , 4598-4601
Novel Measurement Method for Magnetic Particles
This paper represents a novel magnetic nanoparticle measurement method for applications in clinical diagnostics. Planar microcoils and impedance bridge measurement are used to measure the amount of the particles. Macro size coils made on PCB are used to test and verify the measurement method and measurement electronics. Experimental tests and simulative results will be used for a future microscale sensing system
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2006 (1557170X) , 4598-4601
Novel Measurement Method for Magnetic Particles
This paper represents a novel magnetic nanoparticle measurement method for applications in clinical diagnostics. Planar microcoils and impedance bridge measurement are used to measure the amount of the particles. Macro size coils made on PCB are used to test and verify the measurement method and measurement electronics. Experimental tests and simulative results will be used for a future microscale sensing system
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 1557170X,p. 4598-4601
Novel Measurement Method for Magnetic Particles
This paper represents a novel magnetic nanoparticle measurement method for applications in clinical diagnostics. Planar microcoils and impedance bridge measurement are used to measure the amount of the particles. Macro size coils made on PCB are used to test and verify the measurement method and measurement electronics. Experimental tests and simulative results will be used for a future microscale sensing system
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 1557170X,p. 4598-4601
Novel Measurement Method for Magnetic Particles
This paper represents a novel magnetic nanoparticle measurement method for applications in clinical diagnostics. Planar microcoils and impedance bridge measurement are used to measure the amount of the particles. Macro size coils made on PCB are used to test and verify the measurement method and measurement electronics. Experimental tests and simulative results will be used for a future microscale sensing system
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 1557170X,p. 2049-2052
Miniature Wireless Measurement Node for ECG Signal Transmission in Home Area Network
A miniature wireless node for ECG measurements is presented. The ECG node is designed to be used in various applications including measurement of heart rate during physical exercise and continuous long term measurement of ECG for people assumed having, or being recovering from a cardiac disease. The ECG node is wirelessly connected to a computer using IEEE 802.15.4 based radio protocol. The device sends the measured ECG signal together with additional measurement parameters including battery voltage to the computer, where the ECG signal can be analyzed on-line. The ECG node can operate alone or it can be used as a part of an overall system being designed for monitoring people that are transferred from hospital to home treatment
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 1557170X,p. 2049-2052
Miniature Wireless Measurement Node for ECG Signal Transmission in Home Area Network
A miniature wireless node for ECG measurements is presented. The ECG node is designed to be used in various applications including measurement of heart rate during physical exercise and continuous long term measurement of ECG for people assumed having, or being recovering from a cardiac disease. The ECG node is wirelessly connected to a computer using IEEE 802.15.4 based radio protocol. The device sends the measured ECG signal together with additional measurement parameters including battery voltage to the computer, where the ECG signal can be analyzed on-line. The ECG node can operate alone or it can be used as a part of an overall system being designed for monitoring people that are transferred from hospital to home treatment