Sophie Duzellier
Sophie Duzellier has a total of 244 co-authors. Here are the top co-authors by number of shared publications:
R. Ecoffet
French Space Agency (CNES), Toulouse, France
30 shared publications- Guillaume Hubert
ONERA/DPHY - University of Toulouse, France
16 shared publications D. Falguere
ONERA, DESP, 2, av. Edouard Belin, 31055, TOULOUSE CEDEX4, France
13 shared publications- Christophe Inguimbert
ONERA, Toulouse, France
8 shared publications T. Nuns
ONERA, Toulouse, 31055, FRANCE
6 shared publicationsThierry Nuns
ONERA/DPHY Toulouse France
6 shared publications
Latest Publications
- Open Access
- 24 April 2025
- Published by AIP Publishing in APL Energy
- Vol. 3 (2)
Investigation of perovskite solar cells stability under vacuum and AM0 exposure with in situ measurements
As the new space revolution unfolds, the need for cost-effective space photovoltaics is growing. In this context, alternative solar technologies, in particular, perovskites, are gaining attention since they hold promises of price competitiveness, high specific power, and compatibility with rollable/foldable solar arrays. However, strong R&D effort remains before perovskites can effectively power a space mission; for instance, better understanding of space constraints related degradation modes is of utmost importance. In that sense, while much literature is investigating perovskite solar cells’ radiation hardness against various spectra of electrons and protons, far fewer are tackling the topic of vacuum impact, which remains a major constraint in this environment. In this work, we focus on four perovskite cell architectures, three bare cells and one encapsulated, and quantify their behavior against AM0/dark and air/vacuum sequences using in situ Voc monitoring. Those observations are confronted with existing literature hypotheses, and possible vacuum-related perovskite solar cell degradation mechanisms are discussed.
- 24 April 2025
- Published by AIP Publishing in APL Energy
- Vol. 3 (2)
Open AccessInvestigation of perovskite solar cells stability under vacuum and AM0 exposure with in situ measurements
As the new space revolution unfolds, the need for cost-effective space photovoltaics is growing. In this context, alternative solar technologies, in particular, perovskites, are gaining attention since they hold promises of price competitiveness, high specific power, and compatibility with rollable/foldable solar arrays. However, strong R&D effort remains before perovskites can effectively power a space mission; for instance, better understanding of space constraints related degradation modes is of utmost importance. In that sense, while much literature is investigating perovskite solar cells’ radiation hardness against various spectra of electrons and protons, far fewer are tackling the topic of vacuum impact, which remains a major constraint in this environment. In this work, we focus on four perovskite cell architectures, three bare cells and one encapsulated, and quantify their behavior against AM0/dark and air/vacuum sequences using in situ Voc monitoring. Those observations are confronted with existing literature hypotheses, and possible vacuum-related perovskite solar cell degradation mechanisms are discussed.
- 11 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
In-Situ & Ex-Situ Study of Protons and Electrons Irradiations of Perovskite Solar Cells
The need for low cost photovoltaic solutions is becoming more and more important with the ongoing NewSpace revolution. In this context, alternative solar cell technologies are under the spotlight, in particular perovskites which can reach high specific power. In this study, we investigate the electron and proton radiation hardness of multi-cation mixed halide perovskite cells CsxFA1-xPb(IyBr1-y)3. The proton irradiations demonstrate an excellent radiation hardness of the perovskite material but also highlight the degradation of the HTL layer. And the in-situ IV measurements under vacuum following the electron irradiations reveals a self-healing phenomena.
- 11 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
In-Situ & Ex-Situ Study of Protons and Electrons Irradiations of Perovskite Solar Cells
The need for low cost photovoltaic solutions is becoming more and more important with the ongoing NewSpace revolution. In this context, alternative solar cell technologies are under the spotlight, in particular perovskites which can reach high specific power. In this study, we investigate the electron and proton radiation hardness of multi-cation mixed halide perovskite cells CsxFA1-xPb(IyBr1-y)3. The proton irradiations demonstrate an excellent radiation hardness of the perovskite material but also highlight the degradation of the HTL layer. And the in-situ IV measurements under vacuum following the electron irradiations reveals a self-healing phenomena.
- 27 February 2023
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 31 (12) , 1455-1465
Particle‐induced degradation of III–V multi‐junction solar cells under different configurations of displacement damage dose
- 27 February 2023
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 31 (12) , 1455-1465
Particle‐induced degradation of III–V multi‐junction solar cells under different configurations of displacement damage dose
- 1 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 3329-3334
Evaluation of tri-junction solar cells response to electrons and protons of the JUICE specific environment
Degradation of 3G28C Tri-Junction Solar cells from AZUR SPACE has been evaluated for the specific JUICE radiation environment. Data from 1MeV electrons, protons and combined irradiations with in situ measurements is presented on different sets of full scale 3J cells. Analysis is focused on the influence of low temperature, the presence of annealing, and equivalence of damage dose degradation.
- 1 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 3329-3334
Evaluation of tri-junction solar cells response to electrons and protons of the JUICE specific environment
Degradation of 3G28C Tri-Junction Solar cells from AZUR SPACE has been evaluated for the specific JUICE radiation environment. Data from 1MeV electrons, protons and combined irradiations with in situ measurements is presented on different sets of full scale 3J cells. Analysis is focused on the influence of low temperature, the presence of annealing, and equivalence of damage dose degradation.
- 17 November 2017
- Published by SPIE-Intl Soc Optical Eng
- p. 161
High power pulsed fiber laser development for Co2 space based dial system
- 17 November 2017
- Published by SPIE-Intl Soc Optical Eng
- p. 161
High power pulsed fiber laser development for Co2 space based dial system
- 1 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
AXEL lab.: Representative Ground Simulation for Investigating Radiation effects in Materials and Electronics
This paper describes the investigation capabilities at the AXEL lab. of ONERA. Van de Graaf machines and dedicated target chambers allow for studying radiation effects in materials and electronics and qualifying sub-systems for space missions.
- 1 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
AXEL lab.: Representative Ground Simulation for Investigating Radiation effects in Materials and Electronics
This paper describes the investigation capabilities at the AXEL lab. of ONERA. Van de Graaf machines and dedicated target chambers allow for studying radiation effects in materials and electronics and qualifying sub-systems for space missions.
- 1 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Evaluation of spacecraft materials behavior to JUICE environment (Synergistic effect of radiations and cryogenic temperature)
Two extended tests campaigns were performed on JUICE spacecraft materials to evaluate their behavior to Jovian environment. This study was specifically focused on the synergistic effects of radiations and very low temperature on materials.
- 1 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Evaluation of spacecraft materials behavior to JUICE environment (Synergistic effect of radiations and cryogenic temperature)
Two extended tests campaigns were performed on JUICE spacecraft materials to evaluate their behavior to Jovian environment. This study was specifically focused on the synergistic effects of radiations and very low temperature on materials.
- 1 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Complex environmental and synergetic effects on space materials: lesson learned from THERME in-flight data
Surface materials in spacecraft are exposed to complex environment. Various effects i.e., contamination, ageing and erosion are at play and synergy induces severe degradation of performance. The THERME experiment investigates these mechanisms in EEO orbit on a large set of samples.
- 1 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Complex environmental and synergetic effects on space materials: lesson learned from THERME in-flight data
Surface materials in spacecraft are exposed to complex environment. Various effects i.e., contamination, ageing and erosion are at play and synergy induces severe degradation of performance. The THERME experiment investigates these mechanisms in EEO orbit on a large set of samples.
- 1 November 2016
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Spacecraft and Rockets
- Vol. 53 (6) , 1134-1140
Space Environmental Testing of Novel Candidate Materials for Multilayer Insulation
International audienceMultilayer insulation forms the outer barrier of a satellite towards space. Polymer foils used in multilayer insulation have to withstand the space environment for mission durations often lasting well above 10 years. This paper outlines the space environmental test campaign performed to qualify novel and advanced polymer foils to reduce blanket mass and replace export-controlled materials. Complete multilayer insulation layups were irradiated; these were composed of thicker outermost layers of the reference material Kapton®, a white polyimide and an alternative, conductive black polyimide and up to seven thin internal, aluminized 6 μm or 3 μm polyethylene terephthalate and polyethylene naphthalate layers separated by nonwoven spacers. One sample set consisted of 25 μm polyether-ether-ketone foil and 6 μm internal vacuum-deposited-aluminum-coated polyether-ether-ketone layers. Materials were exposed to ultraviolet, electrons and protons simulating a 15-year geostationary orbit mission. Absorptance was measured at various stages in situ during the exposures, and emittance was measured ex situ at the beginning and end of the test. With tensile testing, exposure influence on foil mechanical properties was determined and compared with pristine and reference materials. Although the white polyimide was sensitive to ultraviolet and showed strong degradation after ultraviolet and proton exposure, degradation of all other materials was within expected limits and compatible to state-of-the-art foils
- 1 November 2016
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Spacecraft and Rockets
- Vol. 53 (6) , 1134-1140
Space Environmental Testing of Novel Candidate Materials for Multilayer Insulation
International audienceMultilayer insulation forms the outer barrier of a satellite towards space. Polymer foils used in multilayer insulation have to withstand the space environment for mission durations often lasting well above 10 years. This paper outlines the space environmental test campaign performed to qualify novel and advanced polymer foils to reduce blanket mass and replace export-controlled materials. Complete multilayer insulation layups were irradiated; these were composed of thicker outermost layers of the reference material Kapton®, a white polyimide and an alternative, conductive black polyimide and up to seven thin internal, aluminized 6 μm or 3 μm polyethylene terephthalate and polyethylene naphthalate layers separated by nonwoven spacers. One sample set consisted of 25 μm polyether-ether-ketone foil and 6 μm internal vacuum-deposited-aluminum-coated polyether-ether-ketone layers. Materials were exposed to ultraviolet, electrons and protons simulating a 15-year geostationary orbit mission. Absorptance was measured at various stages in situ during the exposures, and emittance was measured ex situ at the beginning and end of the test. With tensile testing, exposure influence on foil mechanical properties was determined and compared with pristine and reference materials. Although the white polyimide was sensitive to ultraviolet and showed strong degradation after ultraviolet and proton exposure, degradation of all other materials was within expected limits and compatible to state-of-the-art foils
- 1 July 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21540519,p. 1-5
Mirage: A New Proton Facility for the Study of Direct Ionization in Sub-100nm Technologies
A new proton beam line has been developed at ONERA for investigating radiation effects in electronics. Standard beams are used for studying cumulated effects in optoelectronics and photonics, low current configuration has been developed for studying direct ionization effects in advanced digital technologies.
- 1 July 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21540519,p. 1-5
Mirage: A New Proton Facility for the Study of Direct Ionization in Sub-100nm Technologies
A new proton beam line has been developed at ONERA for investigating radiation effects in electronics. Standard beams are used for studying cumulated effects in optoelectronics and photonics, low current configuration has been developed for studying direct ionization effects in advanced digital technologies.