Christophe Inguimbert
Christophe Inguimbert has a total of 217 co-authors. Here are the top co-authors by number of shared publications:
R. Ecoffet
CNES, 31401 Toulouse, France
14 shared publicationsT. Nuns
ONERA-DPhIEE, Toulouse, 31055, France
11 shared publications- Thierry Nuns
ONERA/DPHY, Université de Toulouse, Toulouse, France
9 shared publications D. Falguere
ONERA The French aerospace lab/Département Environnement Spatial, 31400 Toulouse France
8 shared publications- Sophie Duzellier
French Aerospace Laboratory (ONERA), Toulouse, France
8 shared publications - Mohammed Belhaj
DPHY, ONERA, Universit de Toulouse, Toulouse, France
7 shared publications
Latest Publications
- Open Access
- 28 August 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (8)
Multipacting mitigation by atomic layer deposition: The case study of titanium nitride
This study investigates the use of atomic layer deposition (ALD) to mitigate multipacting phenomena inside superconducting radio frequency cavities used in particle accelerators while preserving high quality factors in the 1010 range. The unique ALD capability to control the film thickness down to the atomic level on arbitrary complex shape objects enables the fine-tuning of TiN film resistivity and total electron emission yield (TEEY) from coupons to devices. This level of control allows us to adequately choose a TiN film thickness that provides both high resistivity to prevent Ohmic losses and a low TEEY to mitigate multipacting for the application of interest. The methodology presented in this work can be scaled to other domains and devices subject to RF fields in vacuum and sensitive to multipacting or electron discharge processes with their own requirements in resistivities and TEEY values.
- 28 August 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (8)
Open AccessMultipacting mitigation by atomic layer deposition: The case study of titanium nitride
This study investigates the use of atomic layer deposition (ALD) to mitigate multipacting phenomena inside superconducting radio frequency cavities used in particle accelerators while preserving high quality factors in the 1010 range. The unique ALD capability to control the film thickness down to the atomic level on arbitrary complex shape objects enables the fine-tuning of TiN film resistivity and total electron emission yield (TEEY) from coupons to devices. This level of control allows us to adequately choose a TiN film thickness that provides both high resistivity to prevent Ohmic losses and a low TEEY to mitigate multipacting for the application of interest. The methodology presented in this work can be scaled to other domains and devices subject to RF fields in vacuum and sensitive to multipacting or electron discharge processes with their own requirements in resistivities and TEEY values.
- 14 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 71 (8) , 1914-1923
Radiation Tolerance of Low-Noise Photoreceivers for the LISA Space Mission
This study investigates the effects of space environmental radiation on the performance of In 0.53 Ga 0.47 As Quadrant Photodiodes (QPDs) and assesses their suitability for the Laser Interferometer Space Antenna (LISA) mission. QPDs of 1.0 mm, 1.5 mm, and 2.0 mm diameter were irradiated with 20 and 60 MeV protons, 0.5 and 1 MeV electrons, and Co 60 gamma rays. An exposure corresponding to a Displacement Damage Equivalent Fluence (DDEF) of 1.0×10 +12 p/cm² for 20 and 60 MeV protons and a total ionising dose of 237 krad were applied, exceeding the radiation requirements for the LISA mission by a factor of approximately five. Experiments were conducted to measure changes in QPD dark current, capacitance, and responsivity. The QPDs were integrated with a low-noise DC-coupled transimpedance amplifier to form the Quadrant Photoreceiver (QPR). QPR noise and performance in an interferometric system like LISA were also performed. Although radiation impacted their dark current and responsivity, almost all QPDs met LISA’s validation criteria and did not demonstrate any critical failure. These findings suggest that the tested QPDs are promising candidates for LISA and other space-based missions.
- 14 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 71 (8) , 1914-1923
Radiation Tolerance of Low-Noise Photoreceivers for the LISA Space Mission
This study investigates the effects of space environmental radiation on the performance of In 0.53 Ga 0.47 As Quadrant Photodiodes (QPDs) and assesses their suitability for the Laser Interferometer Space Antenna (LISA) mission. QPDs of 1.0 mm, 1.5 mm, and 2.0 mm diameter were irradiated with 20 and 60 MeV protons, 0.5 and 1 MeV electrons, and Co 60 gamma rays. An exposure corresponding to a Displacement Damage Equivalent Fluence (DDEF) of 1.0×10 +12 p/cm² for 20 and 60 MeV protons and a total ionising dose of 237 krad were applied, exceeding the radiation requirements for the LISA mission by a factor of approximately five. Experiments were conducted to measure changes in QPD dark current, capacitance, and responsivity. The QPDs were integrated with a low-noise DC-coupled transimpedance amplifier to form the Quadrant Photoreceiver (QPR). QPR noise and performance in an interferometric system like LISA were also performed. Although radiation impacted their dark current and responsivity, almost all QPDs met LISA’s validation criteria and did not demonstrate any critical failure. These findings suggest that the tested QPDs are promising candidates for LISA and other space-based missions.
- 13 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 71 (8) , 1470-1479
Damage Energy Threshold Anisotropy in Nonionizing Energy Loss Calculation
The Non Ionizing Energy Loss (NIEL) commonly used to assess the Displacement Damage Dose (DDD) effects in irradiated devices and materials is based on the definition of a single atomic displacement threshold energy (Ed). The use of a single Ed value is known to reproduce quite poorly the level of damage induced by electrons. A method to include a damage threshold energy distribution in the calculation of the NIEL is reported. The variability of displacement threshold energies linked to crystallographic anisotropy of the solids is indirectly taken into account. It also enables the Lindhard partition function to be more consistent with both molecular dynamics modeling and experimental measurements. Below ~1 MeV, our calculations change significantly the electron’s NIEL, that better match experimental damage factors. The NIEL of protons, for its part, is affected at lower energy (~<1 keV).
- 13 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 71 (8) , 1470-1479
Damage Energy Threshold Anisotropy in Nonionizing Energy Loss Calculation
The Non Ionizing Energy Loss (NIEL) commonly used to assess the Displacement Damage Dose (DDD) effects in irradiated devices and materials is based on the definition of a single atomic displacement threshold energy (Ed). The use of a single Ed value is known to reproduce quite poorly the level of damage induced by electrons. A method to include a damage threshold energy distribution in the calculation of the NIEL is reported. The variability of displacement threshold energies linked to crystallographic anisotropy of the solids is indirectly taken into account. It also enables the Lindhard partition function to be more consistent with both molecular dynamics modeling and experimental measurements. Below ~1 MeV, our calculations change significantly the electron’s NIEL, that better match experimental damage factors. The NIEL of protons, for its part, is affected at lower energy (~<1 keV).
- 10 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 71 (4) , 542-547
Investigation of the Impact of Angles and Rotation of Low-Energy Protons in SRAM Cells Down to 16 nm
This work presents the SEU responses of four SRAM devices (65nm, 40nm, 28nm and 16nm) measured at different angles of incidence and orientation of the device in respect to the low energy proton beam direction. Experimental data are discussed with the support of multi-physics and multi-scale simulations. Difference of one order of magnitude is observed for SRAMs irradiated between the different directions the beam is entering the device. The conclusions drawn from the simulation results suggesting that the difference in the SEU cross section could be attributed to the charge sharing between the N and P wells of the two inverters of the SRAM bit. The consequent feedback reduces the overall ionization effects in the SRAM cell when exposed to low energy protons.
- 10 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 71 (4) , 542-547
Investigation of the Impact of Angles and Rotation of Low-Energy Protons in SRAM Cells Down to 16 nm
This work presents the SEU responses of four SRAM devices (65nm, 40nm, 28nm and 16nm) measured at different angles of incidence and orientation of the device in respect to the low energy proton beam direction. Experimental data are discussed with the support of multi-physics and multi-scale simulations. Difference of one order of magnitude is observed for SRAMs irradiated between the different directions the beam is entering the device. The conclusions drawn from the simulation results suggesting that the difference in the SEU cross section could be attributed to the charge sharing between the N and P wells of the two inverters of the SRAM bit. The consequent feedback reduces the overall ionization effects in the SRAM cell when exposed to low energy protons.
- 7 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 70 (8) , 1870-1877
Neutron Displacement Damage Cross Section in GaN: Numerical Evaluations and Differences With Si
The displacement damage cross-section of the neutron - GaN interaction is calculated in the energy range from meV to GeV. Different calculation methods are used and discussed to estimate the modeling uncertainty. The Non-Ionizing Energy Loss (NIEL) and the relative damage factors are also deduced. Differences with the neutron - Silicon interactions are presented and the impacts on the estimation of Total Non-Ionizing Dose (TNID) levels are evaluated as a function of neutron energy.
- 7 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 70 (8) , 1870-1877
Neutron Displacement Damage Cross Section in GaN: Numerical Evaluations and Differences With Si
The displacement damage cross-section of the neutron - GaN interaction is calculated in the energy range from meV to GeV. Different calculation methods are used and discussed to estimate the modeling uncertainty. The Non-Ionizing Energy Loss (NIEL) and the relative damage factors are also deduced. Differences with the neutron - Silicon interactions are presented and the impacts on the estimation of Total Non-Ionizing Dose (TNID) levels are evaluated as a function of neutron energy.
- 4 April 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (13) , 135102
Experimental and Monte-Carlo study of double-hump electron emission yield curves of SiO2 thin films
In this work, we have made experimental measurements of multiple-hump total electron emission yield (TEEY) curves on SiO2 thin films. A Monte-Carlo electron transport model, published in Gibaru et al., J. Electron Spectrosc. Relat. Phenom. 261, 147265 (2022), has been developed to analyze the physical reasons of such atypical behavior. It is shown that the multiple-hump TEEY curves of thin dielectric layers are due to internal recombination effects. However, such kind of phenomenon is demonstrated to be strongly correlated to the incident current density. This analysis reveals that the double-hump TEEY curves observed commonly on insulators are also most probably a measurement artifact, tied to the operating parameters of the electron gun. A careful choice of experimental parameters can eliminate this artifact, by using a constant current density that is also low enough to limit recombination effects.
- 4 April 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (13) , 135102
Experimental and Monte-Carlo study of double-hump electron emission yield curves of SiO2 thin films
In this work, we have made experimental measurements of multiple-hump total electron emission yield (TEEY) curves on SiO2 thin films. A Monte-Carlo electron transport model, published in Gibaru et al., J. Electron Spectrosc. Relat. Phenom. 261, 147265 (2022), has been developed to analyze the physical reasons of such atypical behavior. It is shown that the multiple-hump TEEY curves of thin dielectric layers are due to internal recombination effects. However, such kind of phenomenon is demonstrated to be strongly correlated to the incident current density. This analysis reveals that the double-hump TEEY curves observed commonly on insulators are also most probably a measurement artifact, tied to the operating parameters of the electron gun. A careful choice of experimental parameters can eliminate this artifact, by using a constant current density that is also low enough to limit recombination effects.
- 13 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 11 (5) , 1271-1277
As-Grown InGaAsN Subcells for Multijunction Solar Cells by Molecular Beam Epitaxy
In this article, we investigate the molecular beam epitaxy growth of unannealed 1.12 eV InGaAsN solar cells. The impact of the growth temperature, the As/III ratio and the bismuth used as a surfactant are reported. An in-situ curvature measurement setup enables to monitor and ensures a constant N incorporation during the InGaAsN growth. Ex-situ characterization results suggest that a high As/III ratio ensures good optoelectronic properties and that the growth temperature has a strong influence on the residual doping of the dilute nitride layer. Under AM0 > 870 nm and without antireflection coatings, our best InGaAsN solar cells exhibit J sc and V oc values of 7.94 mA/cm 2 and 0.375 V, respectively. Considering no internal reflection and no grid shading, generation up to 12 mA/cm 2 in a multijunction solar cell can be expected, which is the highest value ever reported for As-grown InGaAsN cells to our knowledge.
- 13 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 11 (5) , 1271-1277
As-Grown InGaAsN Subcells for Multijunction Solar Cells by Molecular Beam Epitaxy
In this article, we investigate the molecular beam epitaxy growth of unannealed 1.12 eV InGaAsN solar cells. The impact of the growth temperature, the As/III ratio and the bismuth used as a surfactant are reported. An in-situ curvature measurement setup enables to monitor and ensures a constant N incorporation during the InGaAsN growth. Ex-situ characterization results suggest that a high As/III ratio ensures good optoelectronic properties and that the growth temperature has a strong influence on the residual doping of the dilute nitride layer. Under AM0 > 870 nm and without antireflection coatings, our best InGaAsN solar cells exhibit J sc and V oc values of 7.94 mA/cm 2 and 0.375 V, respectively. Considering no internal reflection and no grid shading, generation up to 12 mA/cm 2 in a multijunction solar cell can be expected, which is the highest value ever reported for As-grown InGaAsN cells to our knowledge.
- 21 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 68 (8) , 1607-1612
Role of Electron-Induced Coulomb Interactions to the Total SEU Rate During Earth and JUICE Missions
The contribution of Coulomb processes induced by incident electrons in SEU sensitivity is investigated. The case of a 65-nm SOI memory is studied. Several orbits (GPS, JUICE’s orbits) are analyzed. The relative importance to the total SEU rate of electron, proton and gamma environments is compared. SEU induced by electrons are obtained during Earth missions. In the environment of Jupiter, equivalent SEU sensitivities have been obtained between the studied device and the ESA SEU monitor. However, the relative importance of the physical processes involved is very different. Proton-induced SEU rates are estimated about one decade greater than electron-induced SEU rates. The Bremsstrahlung contribution has found negligible in such environment.
- 21 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 68 (8) , 1607-1612
Role of Electron-Induced Coulomb Interactions to the Total SEU Rate During Earth and JUICE Missions
The contribution of Coulomb processes induced by incident electrons in SEU sensitivity is investigated. The case of a 65-nm SOI memory is studied. Several orbits (GPS, JUICE’s orbits) are analyzed. The relative importance to the total SEU rate of electron, proton and gamma environments is compared. SEU induced by electrons are obtained during Earth missions. In the environment of Jupiter, equivalent SEU sensitivities have been obtained between the studied device and the ESA SEU monitor. However, the relative importance of the physical processes involved is very different. Proton-induced SEU rates are estimated about one decade greater than electron-induced SEU rates. The Bremsstrahlung contribution has found negligible in such environment.
- 20 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 68 (8) , 1701-1711
A Kinetic Monte Carlo Algorithm to Model the Annealing Process and Compute the Dark Current Nonuniformity
A simulation chain, composed of GEANT4 and a Kinetic Monte Carlo algorithm, dedicated to study the annealing process of defects produced after energetic particle irradiation is presented. Results will be used to compute Dark Current Nonuniformity.
- 20 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 68 (8) , 1701-1711
A Kinetic Monte Carlo Algorithm to Model the Annealing Process and Compute the Dark Current Nonuniformity
A simulation chain, composed of GEANT4 and a Kinetic Monte Carlo algorithm, dedicated to study the annealing process of defects produced after energetic particle irradiation is presented. Results will be used to compute Dark Current Nonuniformity.