Zuzana Tichá
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zuzana Tichá has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- David Krystof
Institute of Lifelong Learning, Mendel University in Brno
2 shared publications - Jan Kudělka
Department of Agricultural, Food and Environmental Engineering, Faculty of AgriSciences, Mendel University in Brno, Zemědělská 1, 613 00 Brno, Czech Republic
2 shared publications - Lubos Kotek
Department of Production Systems and Virtual Reality Brno University of Technology Brno Czech Republic
2 shared publications - Petr Adamec
Institute of Lifelong Learning, Mendel University in Brno
2 shared publications - Petr Junga
Department of Agricultural, Food and Environmental Engineering, Mendel University in Brno, Zemědělská 1, 613 00 Brno, Czech Republic
2 shared publications - Petr Trávníček
Department of Agricultural, Food and Environmental Engineering, Mendel University in Brno, Zemědělská 1, 613 00 Brno, Czech Republic
2 shared publications
Latest Publications
- Open Access
- 15 July 2026
- Published by MDPI AG in Agriculture
- Vol. 16 (14) , 1521
Behavioral Adaptation and Entry Preferences of Dairy Cows in an AMS
This study investigates the behavioral adaptation and entry preferences of dairy cows entering a Lely Astronaut A5 Automatic Milking System (AMS). The research specifically focuses on the transition period required for cows to achieve independent AMS entry post-calving and evaluates daily milking frequencies across different parities (1st lactation, n = 31; 2nd lactation, n = 60; and ≥3rd lactation, n = 24). Spatial preferences for two physically distinct AMS units (left- versus right-sided configurations) were also assessed. Results show that primiparous cows achieved independent AMS entry (defined as a threshold of ≥2.5 voluntary milkings/day) by the 23rd day post-calving, whereas multiparous cows (both 2nd and ≥3rd lactation groups) established stable, autonomous visitation patterns much earlier, by day 4 postpartum. Furthermore, parity significantly influenced spatial unit-use patterns; while primiparous and second-lactation cows distributed their visits evenly between the two robots, older multiparous cows (≥3rd lactation) exhibited a higher utilization of the left-sided AMS unit, which accounted for 50.0% to 67.5% of their total daily visits. This spatial choice may be associated with differences in age and previous experience, and potentially with social hierarchy; however, this study does not include direct behavioral observations to confirm dominance relationships. Polynomial regression analyses revealed a non-linear relationship between voluntary visitation rates and daily milk yield, characterized by distinct performance plateaus. These findings underscore the importance of parity-specific management, such as pre-calving AMS training and familiarization protocols for heifers, to optimize robotic dairy efficiency and animal welfare.
- 15 July 2026
- Published by MDPI AG in Agriculture
- Vol. 16 (14) , 1521
Open AccessBehavioral Adaptation and Entry Preferences of Dairy Cows in an AMS
This study investigates the behavioral adaptation and entry preferences of dairy cows entering a Lely Astronaut A5 Automatic Milking System (AMS). The research specifically focuses on the transition period required for cows to achieve independent AMS entry post-calving and evaluates daily milking frequencies across different parities (1st lactation, n = 31; 2nd lactation, n = 60; and ≥3rd lactation, n = 24). Spatial preferences for two physically distinct AMS units (left- versus right-sided configurations) were also assessed. Results show that primiparous cows achieved independent AMS entry (defined as a threshold of ≥2.5 voluntary milkings/day) by the 23rd day post-calving, whereas multiparous cows (both 2nd and ≥3rd lactation groups) established stable, autonomous visitation patterns much earlier, by day 4 postpartum. Furthermore, parity significantly influenced spatial unit-use patterns; while primiparous and second-lactation cows distributed their visits evenly between the two robots, older multiparous cows (≥3rd lactation) exhibited a higher utilization of the left-sided AMS unit, which accounted for 50.0% to 67.5% of their total daily visits. This spatial choice may be associated with differences in age and previous experience, and potentially with social hierarchy; however, this study does not include direct behavioral observations to confirm dominance relationships. Polynomial regression analyses revealed a non-linear relationship between voluntary visitation rates and daily milk yield, characterized by distinct performance plateaus. These findings underscore the importance of parity-specific management, such as pre-calving AMS training and familiarization protocols for heifers, to optimize robotic dairy efficiency and animal welfare.
- Open Access
- 1 January 2026
- Published by Juraj Dobrila University of Pula in Economic Research-Ekonomska Istraživanja
- Vol. 39 (1) , 101-117
Identification of forms of knowledge transfer in the accident learning system
Successful knowledge transfer is one of the basic prerequisites for learning from past events in any enterprise, not excluding enterprises with a risk of major accident. Knowledge can take different forms - tacit and explicit knowledge. In order to apply effective procedures for the transfer of this knowledge, it is necessary to first identify the forms of knowledge that are shared in the organization. Only then can appropriate procedures be applied. In the past, systems for learning from incidents, including support for knowledge sharing, have been developed by various organizations and scientific groups. The issue of identifying forms of knowledge transfer and then applying appropriate methods for sharing this knowledge has not been addressed in much detail. The aim of this paper is to demonstrate on a hypothetical example of the incident the identification of forms of knowledge that can be shared within a Lessons Learned from Incident (LFI) system. A hypothetical example is used as a case study. The contribution of the article is the description of knowledge transfer on a specific example, both explicit and tacit knowledge. The case study can be used as an example of how to transfer knowledge and which methods could be used to streamline accident learning systems.
- 1 January 2026
- Published by Juraj Dobrila University of Pula in Economic Research-Ekonomska Istraživanja
- Vol. 39 (1) , 101-117
Open AccessIdentification of forms of knowledge transfer in the accident learning system
Successful knowledge transfer is one of the basic prerequisites for learning from past events in any enterprise, not excluding enterprises with a risk of major accident. Knowledge can take different forms - tacit and explicit knowledge. In order to apply effective procedures for the transfer of this knowledge, it is necessary to first identify the forms of knowledge that are shared in the organization. Only then can appropriate procedures be applied. In the past, systems for learning from incidents, including support for knowledge sharing, have been developed by various organizations and scientific groups. The issue of identifying forms of knowledge transfer and then applying appropriate methods for sharing this knowledge has not been addressed in much detail. The aim of this paper is to demonstrate on a hypothetical example of the incident the identification of forms of knowledge that can be shared within a Lessons Learned from Incident (LFI) system. A hypothetical example is used as a case study. The contribution of the article is the description of knowledge transfer on a specific example, both explicit and tacit knowledge. The case study can be used as an example of how to transfer knowledge and which methods could be used to streamline accident learning systems.
- Open Access
- 1 September 2024
- Published by Walter de Gruyter GmbH in Acta Technologica Agriculturae
- Vol. 27 (3) , 179-186
Possibilities of Detecting and Evaluating Thermal Defects in Agricultural Building Envelopes Using Simultaneous Infrared Thermography and Computer Modelling
The aim of this paper is to investigate the possibility of using two different methods together to detect more accurately and to evaluate thermal defects in the envelope of agricultural buildings. The structure of heated agricultural buildings is significantly influenced by the characteristics of the indoor environment (aggressive gaseous and liquid substances, high humidity, higher heating temperatures, etc.). In this study, research has been conducted that synergistically combines two methods for the evaluation of thermal defects, where the structure is evaluated using infrared thermography and at the same time described as a numerical model for a more detailed identification of envelope defects and thermal bridges. The study confirmed that in agricultural building structures, thermal defects are most commonly found in the areas of window lintels, ceiling and bracing structures, window and door joints, and foundation and floor joints, while the proposed combination of the two methods for assessing thermal defects in structures demonstrated superior performance in terms of accuracy and detail of results obtained compared to the standard partial use of only one of these methods.
- 1 September 2024
- Published by Walter de Gruyter GmbH in Acta Technologica Agriculturae
- Vol. 27 (3) , 179-186
Open AccessPossibilities of Detecting and Evaluating Thermal Defects in Agricultural Building Envelopes Using Simultaneous Infrared Thermography and Computer Modelling
The aim of this paper is to investigate the possibility of using two different methods together to detect more accurately and to evaluate thermal defects in the envelope of agricultural buildings. The structure of heated agricultural buildings is significantly influenced by the characteristics of the indoor environment (aggressive gaseous and liquid substances, high humidity, higher heating temperatures, etc.). In this study, research has been conducted that synergistically combines two methods for the evaluation of thermal defects, where the structure is evaluated using infrared thermography and at the same time described as a numerical model for a more detailed identification of envelope defects and thermal bridges. The study confirmed that in agricultural building structures, thermal defects are most commonly found in the areas of window lintels, ceiling and bracing structures, window and door joints, and foundation and floor joints, while the proposed combination of the two methods for assessing thermal defects in structures demonstrated superior performance in terms of accuracy and detail of results obtained compared to the standard partial use of only one of these methods.
- Open Access
- 11 March 2024
- Published by Wiley in Process Safety Progress
- Vol. 43 (3) , 536-541
Supporting the transfer of knowledge in high‐risk major accident environment
A key element in learning from accidents is the skill associated with the transfer of knowledge gained by the operator from historical incidents. These incidents can include accidents and near‐misses that occurred on site or in similar companies outside the plant. Knowledge transfer within the enterprise can be supported by a suitable framework or model that is easily understood by a wide range of people who are interested in the lessons learned from accidents. The application of some of the knowledge transfer models used so far can be quite time consuming and uncomfortable for the participants. For this reason, this paper aims to propose a simple model designed to support knowledge transfer. This model is proposed based on the widely used PDCA (plan‐do‐check‐act) framework. Its use is demonstrated by the case of a major accident that occurred in the Czech Republic. The model can be used not only for learning from major accidents that occur in the subject company but also for learning from near‐misses or events that occurred in the past in similar plants. Thus, the model can easily help in increasing the efficiency of the accident‐learning system in particular.
- 11 March 2024
- Published by Wiley in Process Safety Progress
- Vol. 43 (3) , 536-541
Open AccessSupporting the transfer of knowledge in high‐risk major accident environment
A key element in learning from accidents is the skill associated with the transfer of knowledge gained by the operator from historical incidents. These incidents can include accidents and near‐misses that occurred on site or in similar companies outside the plant. Knowledge transfer within the enterprise can be supported by a suitable framework or model that is easily understood by a wide range of people who are interested in the lessons learned from accidents. The application of some of the knowledge transfer models used so far can be quite time consuming and uncomfortable for the participants. For this reason, this paper aims to propose a simple model designed to support knowledge transfer. This model is proposed based on the widely used PDCA (plan‐do‐check‐act) framework. Its use is demonstrated by the case of a major accident that occurred in the Czech Republic. The model can be used not only for learning from major accidents that occur in the subject company but also for learning from near‐misses or events that occurred in the past in similar plants. Thus, the model can easily help in increasing the efficiency of the accident‐learning system in particular.
- Open Access
- 28 September 2013
- Published by Mendel University Press in Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis
- Vol. 61 (5) , 1423-1429
Avoidance behaviour testing of Eisenia andrei in biodegradable plastic environment
Avoidance behaviour test with the earthworms (ISO 17512-1:2008) is a rapid screening test for the evaluation of soil and the influence of pollutants and chemicals on the behaviour of earthworms. The purpose of the testing is to determine the avoidance behaviour of earthworm (in this case Eisenia andrei was used) which can be used as an organism for the composting and occur naturally in soil environment. The methodology was modified according to the needs of the avoidance behaviour testing of earthworms in biodegradable plastic environment. It is a biodegradable thermoplastic material Mater-Bi, which is produced from corn starch. Californian earthworm (Eisenia andrei) was chosen as a test organism. The two-chamber test was used in testing. 10 earthworms were used, which were exposed to a number of concentrations of the test substance, which was mixed into the compost environment. It was recorded both a positive result, avoidance reaction, as well as a negative result, non-avoidance reaction and also there was a case, where individuals prefer both substrates equally. Organisms showed no escape reaction and were fairly evenly distributed in both halves of the test vessel, it can be assessed that organisms prefer both substrates equally. In testing, the mortality was zero, none of the individuals died, at the conclusion of the test there were not found any dead individuals. Avoidance higher than 80 % didn’t occur; it cannot be said that the substrate is toxic or degraded.
- 28 September 2013
- Published by Mendel University Press in Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis
- Vol. 61 (5) , 1423-1429
Open AccessAvoidance behaviour testing of Eisenia andrei in biodegradable plastic environment
Avoidance behaviour test with the earthworms (ISO 17512-1:2008) is a rapid screening test for the evaluation of soil and the influence of pollutants and chemicals on the behaviour of earthworms. The purpose of the testing is to determine the avoidance behaviour of earthworm (in this case Eisenia andrei was used) which can be used as an organism for the composting and occur naturally in soil environment. The methodology was modified according to the needs of the avoidance behaviour testing of earthworms in biodegradable plastic environment. It is a biodegradable thermoplastic material Mater-Bi, which is produced from corn starch. Californian earthworm (Eisenia andrei) was chosen as a test organism. The two-chamber test was used in testing. 10 earthworms were used, which were exposed to a number of concentrations of the test substance, which was mixed into the compost environment. It was recorded both a positive result, avoidance reaction, as well as a negative result, non-avoidance reaction and also there was a case, where individuals prefer both substrates equally. Organisms showed no escape reaction and were fairly evenly distributed in both halves of the test vessel, it can be assessed that organisms prefer both substrates equally. In testing, the mortality was zero, none of the individuals died, at the conclusion of the test there were not found any dead individuals. Avoidance higher than 80 % didn’t occur; it cannot be said that the substrate is toxic or degraded.