Qin-Xiang Jia
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Qin-Xiang Jia has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
- Xiaoyong Li
Department of Applied Chemistry, School of Chemistry, Xi’an Jiaotong University, No. 28, Xianning West Road, Xi’an 710049, China
7 shared publications - Yang Sun
Department of Applied Chemistry, School of Chemistry, Xi’an Jiaotong University, No. 28, Xianning West Road, Xi’an 710049, China
7 shared publications - Yong Wu
Department of Applied Chemistry, School of Chemistry, Xi’an Jiaotong University, No. 28, Xianning West Road, Xi’an 710049, China
7 shared publications - Sidra Chaudhary
Department of Applied Chemistry, School of Chemistry, Xi’an Jiaotong University, No. 28, Xianning West Road, Xi’an 710049, China
6 shared publications Min Cheng
Xi An Jiao Tong Univ, Sch Sci, Dept Chem, 28 Xianning West Rd, Xian 710049, Shaanxi, Peoples R China
5 shared publications- Zainab Bibi
Department of Applied Chemistry, School of Chemistry, Xi’an Jiaotong University, No. 28, Xianning West Road, Xi’an 710049, China
4 shared publications
Latest Publications
- 18 November 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Humidity-Regulated MOF-Kirigami Passive Flyer
While passive flyers have gained increasing attention as an energy-efficient alternative to active unmanned aerial vehicles, they are challenged by limited flight time, high energy consumption, and large-scale deployment issues caused by heavy batteries and complex electronics. The dandelion seed, a natural passive flyer for wind-borne dispersal, has inspired the design of synthetic biomimetic counterparts that similarly leverage airflow for sustained locomotion. However, existing designs lack adaptive mechanisms to respond to diverse environmental conditions such as humidity variation, limiting their functionality in real-world atmospheres. Thus, a humidity-regulated passive flyer was presented here which integrates a ZPF-2-Co metal-organic framework (MOF)-polymer composite humidity actuator into a dandelion-seed-inspired kirigami structure. This flyer is capable of altering its flight position based on ambient humidity, enabling adaptive dispersal. A theoretical model about descent of a dandelion seed was established, using fluid dynamics simulations to analyze the flow field and pressure distribution. It is revealed that a vortex ring formed above the pappus increases drag and slows descent, while a restoring torque stabilizes the attitude and enables gliding upon tilt. Flight tests under seven humidity conditions reveal that the flyer descends vertically below 70% RH, transitions into stable gliding between 70% and 80% RH for controlled long-distance dispersal, and loses gliding stability due to flipping when RH exceeds 84.6%. The passive flyers developed in this work validate the humidity-regulating functionality of MOFs and their potential implementation in flexible devices, providing a foundation for future applications such as smart agriculture, distributed environmental sensing, and pollution tracking.
- 18 November 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Humidity-Regulated MOF-Kirigami Passive Flyer
While passive flyers have gained increasing attention as an energy-efficient alternative to active unmanned aerial vehicles, they are challenged by limited flight time, high energy consumption, and large-scale deployment issues caused by heavy batteries and complex electronics. The dandelion seed, a natural passive flyer for wind-borne dispersal, has inspired the design of synthetic biomimetic counterparts that similarly leverage airflow for sustained locomotion. However, existing designs lack adaptive mechanisms to respond to diverse environmental conditions such as humidity variation, limiting their functionality in real-world atmospheres. Thus, a humidity-regulated passive flyer was presented here which integrates a ZPF-2-Co metal-organic framework (MOF)-polymer composite humidity actuator into a dandelion-seed-inspired kirigami structure. This flyer is capable of altering its flight position based on ambient humidity, enabling adaptive dispersal. A theoretical model about descent of a dandelion seed was established, using fluid dynamics simulations to analyze the flow field and pressure distribution. It is revealed that a vortex ring formed above the pappus increases drag and slows descent, while a restoring torque stabilizes the attitude and enables gliding upon tilt. Flight tests under seven humidity conditions reveal that the flyer descends vertically below 70% RH, transitions into stable gliding between 70% and 80% RH for controlled long-distance dispersal, and loses gliding stability due to flipping when RH exceeds 84.6%. The passive flyers developed in this work validate the humidity-regulating functionality of MOFs and their potential implementation in flexible devices, providing a foundation for future applications such as smart agriculture, distributed environmental sensing, and pollution tracking.
- Open Access
- 12 February 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (4) , 240
Towards Ultra-Rapid and High-Toughness Cementing: A Synergistic Acceleration Leveraging Aluminum Sulfate and Sodium Alginate Copolymer Along with Glass Fibers
This study synthesizes two highly water-soluble copolymers, p(SA-co-SMAS) and p(SA-co-SMAS-co-AMPS) using sodium alginate (SA), sodium 2-methylprop-2-ene-1-sulfonate (SMAS), and 2-acrylamido-2-methylpropane sulfonic acid (AMPS, with or without addition) as precursors. Under ball milling, these copolymers are blended with aluminum sulfate and glass fibers to produce two series of cement admixtures. Compared to systems without admixtures or with pure aluminum sulfate as sole admixture, the admixture obtained from p(SA-co-SMAS) and aluminum sulfate significantly shortens the initial setting time (4.47 vs. 33.59 and 29.51 min) and final setting time (8.46 vs. 45.26 and 35.12 min), while markedly improving compressive strength (9.2 vs. 3.5 and 4.3 MPa) and flexural strength (3.5 vs. 1.0 and 1.1 MPa). This enhancement is attributed to the formation of a unique boehmite (AlO(OH)) phase in synthesized admixture, which rapidly reacts with tricalcium silicate, gypsum, and water in cement to form ettringite (Ca6Al2(SO4)3(OH)12·26H2O). The ettringite interlocks with the two-dimensional C–S–H gel, creating a stable three-dimensional network. Further blending this admixture with 200-mesh glass fibers yields a new admixture containing Al4SO4(OH)10·36H2O. Compared to boehmite, this phase further reduces setting times and increases average compressive strength (10.2 vs. 9.2 MPa). The admixture derived from p(SA-co-SMAS-co-AMPS) and aluminum sulfate shows even better performance: setting times are further shortened and flexural strength is significantly enhanced, owing to the presence of the more effective Al4SO4(OH)10·36H2O phase. Incorporating 200-mesh glass fibers into this system results in the shortest setting times (initial: 2.24 min, final: 5.73 min) and an excellent 24 h compressive strength (9.4 MPa), likely due to a unique and unexpected pore-filling effect. In contrast to conventional uses of sodium alginate as a retarder, glass fibers as mere reinforcements, and aluminum sulfate as a strength-impairing accelerator, this work demonstrates a synergistic strategy, which enables an ultra-rapid and high-strength cement setting process, offering highly significant scientific and practical value.
- 12 February 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (4) , 240
Open AccessTowards Ultra-Rapid and High-Toughness Cementing: A Synergistic Acceleration Leveraging Aluminum Sulfate and Sodium Alginate Copolymer Along with Glass Fibers
This study synthesizes two highly water-soluble copolymers, p(SA-co-SMAS) and p(SA-co-SMAS-co-AMPS) using sodium alginate (SA), sodium 2-methylprop-2-ene-1-sulfonate (SMAS), and 2-acrylamido-2-methylpropane sulfonic acid (AMPS, with or without addition) as precursors. Under ball milling, these copolymers are blended with aluminum sulfate and glass fibers to produce two series of cement admixtures. Compared to systems without admixtures or with pure aluminum sulfate as sole admixture, the admixture obtained from p(SA-co-SMAS) and aluminum sulfate significantly shortens the initial setting time (4.47 vs. 33.59 and 29.51 min) and final setting time (8.46 vs. 45.26 and 35.12 min), while markedly improving compressive strength (9.2 vs. 3.5 and 4.3 MPa) and flexural strength (3.5 vs. 1.0 and 1.1 MPa). This enhancement is attributed to the formation of a unique boehmite (AlO(OH)) phase in synthesized admixture, which rapidly reacts with tricalcium silicate, gypsum, and water in cement to form ettringite (Ca6Al2(SO4)3(OH)12·26H2O). The ettringite interlocks with the two-dimensional C–S–H gel, creating a stable three-dimensional network. Further blending this admixture with 200-mesh glass fibers yields a new admixture containing Al4SO4(OH)10·36H2O. Compared to boehmite, this phase further reduces setting times and increases average compressive strength (10.2 vs. 9.2 MPa). The admixture derived from p(SA-co-SMAS-co-AMPS) and aluminum sulfate shows even better performance: setting times are further shortened and flexural strength is significantly enhanced, owing to the presence of the more effective Al4SO4(OH)10·36H2O phase. Incorporating 200-mesh glass fibers into this system results in the shortest setting times (initial: 2.24 min, final: 5.73 min) and an excellent 24 h compressive strength (9.4 MPa), likely due to a unique and unexpected pore-filling effect. In contrast to conventional uses of sodium alginate as a retarder, glass fibers as mere reinforcements, and aluminum sulfate as a strength-impairing accelerator, this work demonstrates a synergistic strategy, which enables an ultra-rapid and high-strength cement setting process, offering highly significant scientific and practical value.
- Open Access
Enhancing Cement Hydration and Mechanical Strength via Co-Polymerization of Sodium Humate with Superplasticizer Monomers and Sequential Blending with Aluminum Sulfate and Carbon Fibers
This study presents a new ternary copolymer synthesized via aqueous free-radical polymerization from sodium humate, sodium 2-methylprop-2-ene-1-sulfonate (SMAS), and 2-acrylamido-2-methylpropane sulfonic acid (AMPS). The resulting highly water-soluble, three-dimensional porous copolymer is complexed with aluminum sulfate to form a composite admixture containing AlO(OH), which acts as a highly effective accelerator for cement hydration. This system significantly shortens the initial and final setting times to averages of 2.62 min and 4.53 min, respectively, and enhances early-age mechanical strength (1.7 MPa compressive, 1.4 MPa flexural at 6 h). These improvements are correlated with the formation of key crystalline phases, including Al2Si2O5(OH)4 and Ca3Al2O6·xH2O gel. Incorporation of 50-mesh carbon fibers further reduces setting times (2.21 min initial, 3.93 min final) and increases 24 h strength (5.2 MPa compressive, 2.7 MPa flexural), despite a slight reduction in early strength (at 6 h). In contrast, 200-mesh carbon fibers extend the initial setting time and diminish early strength, associated with the formation of less effective gel phases such as Ca3Al2O6·xH2O, (CaO)x(Al2O3)11, and Ca4Al2O7·xH2O. Among these, the Al2Si2O5(OH)4 phase demonstrates superior performance, while finer carbon fibers show limited effectiveness in bridging hydration products. Conventionally employed as retarders or reinforcing agents, humate-based polymers and carbon fibers are shown here to function as dual-functional admixtures—serving as efficient setting accelerators while enhancing mechanical properties through tailored material design. This strategy offers a promising pathway for developing advanced multifunctional cement admixtures.
Open AccessEnhancing Cement Hydration and Mechanical Strength via Co-Polymerization of Sodium Humate with Superplasticizer Monomers and Sequential Blending with Aluminum Sulfate and Carbon Fibers
This study presents a new ternary copolymer synthesized via aqueous free-radical polymerization from sodium humate, sodium 2-methylprop-2-ene-1-sulfonate (SMAS), and 2-acrylamido-2-methylpropane sulfonic acid (AMPS). The resulting highly water-soluble, three-dimensional porous copolymer is complexed with aluminum sulfate to form a composite admixture containing AlO(OH), which acts as a highly effective accelerator for cement hydration. This system significantly shortens the initial and final setting times to averages of 2.62 min and 4.53 min, respectively, and enhances early-age mechanical strength (1.7 MPa compressive, 1.4 MPa flexural at 6 h). These improvements are correlated with the formation of key crystalline phases, including Al2Si2O5(OH)4 and Ca3Al2O6·xH2O gel. Incorporation of 50-mesh carbon fibers further reduces setting times (2.21 min initial, 3.93 min final) and increases 24 h strength (5.2 MPa compressive, 2.7 MPa flexural), despite a slight reduction in early strength (at 6 h). In contrast, 200-mesh carbon fibers extend the initial setting time and diminish early strength, associated with the formation of less effective gel phases such as Ca3Al2O6·xH2O, (CaO)x(Al2O3)11, and Ca4Al2O7·xH2O. Among these, the Al2Si2O5(OH)4 phase demonstrates superior performance, while finer carbon fibers show limited effectiveness in bridging hydration products. Conventionally employed as retarders or reinforcing agents, humate-based polymers and carbon fibers are shown here to function as dual-functional admixtures—serving as efficient setting accelerators while enhancing mechanical properties through tailored material design. This strategy offers a promising pathway for developing advanced multifunctional cement admixtures.
- Open Access
- 13 February 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (4) , 283
The Encapsulation of Illite Powders with Al2(SO4)3·18H2O and Hydrophilic Copolymers: Accelerating and Toughening Cement Hydration Through the Proliferation of 54CaO·MgO·Al2O3·16SiO2 Clinker
Two hydrophilic copolymers containing functional groups such as carboxyl, amido, and sulfonic acid are synthesized using ammonium persulfate-catalyzed free radical polymerization in water. Aluminum sulfate is then introduced, resulting in two polymer complexes that exhibit reduced cement setting times (initial, 1.16–2.44 min; final, 2.02–3.14 min) and improved compressive (24 h, 5.81–7.25 MPa) and flexural (24 h, 2.80–2.99 MPa) strengths compared to pure aluminum sulfate-facilitated cementing (initial, 19.11 min; final, 37.05 min; compressive, 24 h, 5.51 MPa; flexural, 24 h, 2.56 MPa). Following this, ball-milled illite powder is added, and the resulting admixtures further display slightly prolonged setting times (initial, 2.35–2.99 vs. 1.16–2.44 min; final, 3.98–4.35 vs. 2.02–3.14 min), along with comparable compressive strengths (5.85–7.11 vs. 5.81–7.25 MPa) and enhanced flexural strengths (3.92–5.83 vs. 2.80–2.99 MPa). Notably, a unique adhesive pozzolanic clinker, Ca54MgAl2Si16O90 (54CaO·MgO·Al2O3·16SiO2), emerges in the presence of illite-based admixtures, contributing to the mechanical strength development of the hydrated mortars. Although illite itself is hydrophobic, the coating of ball-milled illite powder with aluminum sulfate and copolymers facilitates its dispersion into the gaps and pores of the cement matrix during setting, thereby increasing the flexural strength. This work presents an interesting approach to utilizing illite materials in cement applications, which is significant for reducing CO2 emissions during cement production and use.
- 13 February 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (4) , 283
Open AccessThe Encapsulation of Illite Powders with Al2(SO4)3·18H2O and Hydrophilic Copolymers: Accelerating and Toughening Cement Hydration Through the Proliferation of 54CaO·MgO·Al2O3·16SiO2 Clinker
Two hydrophilic copolymers containing functional groups such as carboxyl, amido, and sulfonic acid are synthesized using ammonium persulfate-catalyzed free radical polymerization in water. Aluminum sulfate is then introduced, resulting in two polymer complexes that exhibit reduced cement setting times (initial, 1.16–2.44 min; final, 2.02–3.14 min) and improved compressive (24 h, 5.81–7.25 MPa) and flexural (24 h, 2.80–2.99 MPa) strengths compared to pure aluminum sulfate-facilitated cementing (initial, 19.11 min; final, 37.05 min; compressive, 24 h, 5.51 MPa; flexural, 24 h, 2.56 MPa). Following this, ball-milled illite powder is added, and the resulting admixtures further display slightly prolonged setting times (initial, 2.35–2.99 vs. 1.16–2.44 min; final, 3.98–4.35 vs. 2.02–3.14 min), along with comparable compressive strengths (5.85–7.11 vs. 5.81–7.25 MPa) and enhanced flexural strengths (3.92–5.83 vs. 2.80–2.99 MPa). Notably, a unique adhesive pozzolanic clinker, Ca54MgAl2Si16O90 (54CaO·MgO·Al2O3·16SiO2), emerges in the presence of illite-based admixtures, contributing to the mechanical strength development of the hydrated mortars. Although illite itself is hydrophobic, the coating of ball-milled illite powder with aluminum sulfate and copolymers facilitates its dispersion into the gaps and pores of the cement matrix during setting, thereby increasing the flexural strength. This work presents an interesting approach to utilizing illite materials in cement applications, which is significant for reducing CO2 emissions during cement production and use.
- Open Access
- 2 January 2025
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (1) , 11
Reinforcement of Polyethylene with Potassium Hexatitanate Whiskers: Importance of Polyvinylpyrrolidone Additive
Potassium hexatitanate whiskers are prepared and characterized in this study. The reinforcement of polyethylene with potassium hexatitanate whiskers is also investigated. The potassium hexatitanate whiskers are prepared through the calcination of TiO2 and K2CO3 at 1000 °C. It is determined that a polyvinylpyrrolidone additive is crucial for the formation of slender rod-like structures with smooth and flat surfaces and a high length-to-diameter ratio. For the surface modification of the whiskers, γ-aminopropyl triethoxysilane has been identified as the most effective coupling agent for enhancing mechanical properties. The whiskers have little change in shape after surface modification, and the majority of the whiskers still retain a considerable length-to-diameter ratio. The results of mechanical tests indicate that the tensile strength and the modulus of elasticity, as well as the shear strength and the shear elasticity, are enhanced to some extent. The tensile strength and the modulus of elasticity increase by 18.6% and 3.6%, respectively. The modified polyethylene composites show enhanced softness and elasticity. The elongation at the break for the prepared PE/PHT-2-1 composites increases significantly to 38.1%, significantly exceeding that of unfilled polyethylene (6.84%). Nevertheless, a suitable method is established for reinforcing thermoplastic polymers using inexpensive potassium hexatitanate whiskers.
- 2 January 2025
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (1) , 11
Open AccessReinforcement of Polyethylene with Potassium Hexatitanate Whiskers: Importance of Polyvinylpyrrolidone Additive
Potassium hexatitanate whiskers are prepared and characterized in this study. The reinforcement of polyethylene with potassium hexatitanate whiskers is also investigated. The potassium hexatitanate whiskers are prepared through the calcination of TiO2 and K2CO3 at 1000 °C. It is determined that a polyvinylpyrrolidone additive is crucial for the formation of slender rod-like structures with smooth and flat surfaces and a high length-to-diameter ratio. For the surface modification of the whiskers, γ-aminopropyl triethoxysilane has been identified as the most effective coupling agent for enhancing mechanical properties. The whiskers have little change in shape after surface modification, and the majority of the whiskers still retain a considerable length-to-diameter ratio. The results of mechanical tests indicate that the tensile strength and the modulus of elasticity, as well as the shear strength and the shear elasticity, are enhanced to some extent. The tensile strength and the modulus of elasticity increase by 18.6% and 3.6%, respectively. The modified polyethylene composites show enhanced softness and elasticity. The elongation at the break for the prepared PE/PHT-2-1 composites increases significantly to 38.1%, significantly exceeding that of unfilled polyethylene (6.84%). Nevertheless, a suitable method is established for reinforcing thermoplastic polymers using inexpensive potassium hexatitanate whiskers.
- Open Access
The Efficient and Environmentally Friendly Chlorination of Arene, Alcohol, Halobenzene, and Peroxide Catalyzed by Fe–Ba Binary Oxides Using Hydrochloric Acid as Chlorine Source and Aqueous H2O2 as Oxidant
A series of Fe–Ba mixed oxides, including a pure Fe-containing sample as a reference, have been synthesized via a sol–gel process using Fe3+ or Fe2+ salts and BaSO4 as raw materials, with Pluronic P123 serving as a template. These oxides have been thoroughly characterized and subsequently utilized as catalysts for the chlorination of various organic molecules. Commercial hydrochloric acid, known for its relative safety, and environmentally friendly aqueous hydrogen peroxide were employed as the chlorine source and oxidant, respectively. The pure Fe-containing catalyst displays excellent thermal stability between 600 and 800 °C and exhibited moderate to high conversions in the chlorination of toluene, benzene, and tert-butyl hydroperoxide, with remarkable ortho-selectivity in chlorination of toluene. The combination of Fe3+ salt with BaSO4 in the sol–gel process results in a Fe–Ba mixed oxide catalyst composed of BaO2, BaFe4O7, and Fe2O3, significantly enhancing the chlorination activity compared to that displayed by the pure Fe catalyst. Notably, the chlorination of tert-butyl hydroperoxide (TBHP) does not require additional oxidants such as H2O2, and involves both electrophilic substitution and nucleophilic addition. Notably, the chlorination of bromobenzene yields chlorobenzene as the sole product, a transformation that has not been previously reported. Overall, this catalytic chlorination system holds promise for advancing the chlorination industry and enhancing pharmaceutical production.
Open AccessThe Efficient and Environmentally Friendly Chlorination of Arene, Alcohol, Halobenzene, and Peroxide Catalyzed by Fe–Ba Binary Oxides Using Hydrochloric Acid as Chlorine Source and Aqueous H2O2 as Oxidant
A series of Fe–Ba mixed oxides, including a pure Fe-containing sample as a reference, have been synthesized via a sol–gel process using Fe3+ or Fe2+ salts and BaSO4 as raw materials, with Pluronic P123 serving as a template. These oxides have been thoroughly characterized and subsequently utilized as catalysts for the chlorination of various organic molecules. Commercial hydrochloric acid, known for its relative safety, and environmentally friendly aqueous hydrogen peroxide were employed as the chlorine source and oxidant, respectively. The pure Fe-containing catalyst displays excellent thermal stability between 600 and 800 °C and exhibited moderate to high conversions in the chlorination of toluene, benzene, and tert-butyl hydroperoxide, with remarkable ortho-selectivity in chlorination of toluene. The combination of Fe3+ salt with BaSO4 in the sol–gel process results in a Fe–Ba mixed oxide catalyst composed of BaO2, BaFe4O7, and Fe2O3, significantly enhancing the chlorination activity compared to that displayed by the pure Fe catalyst. Notably, the chlorination of tert-butyl hydroperoxide (TBHP) does not require additional oxidants such as H2O2, and involves both electrophilic substitution and nucleophilic addition. Notably, the chlorination of bromobenzene yields chlorobenzene as the sole product, a transformation that has not been previously reported. Overall, this catalytic chlorination system holds promise for advancing the chlorination industry and enhancing pharmaceutical production.
- Open Access
Al(SO4)(OH)·5H2O Stemming from Complexation of Aluminum Sulfate with Water-Soluble Ternary Copolymer and further Stabilized by Silica Gel as Effective Admixtures for Enhanced Mortar Cementing
A water-soluble ternary copolymer bearing carboxyl, sulfonic, and amide functional groups was synthesized using ammonium persulfate-catalyzed free radical polymerization in water, resulting in high monomer conversion. This copolymer was then complexed with aluminum sulfate, forming an admixture containing Al(SO4)(OH)·5H2O, which was subsequently combined with silica gel. Characterization revealed that the synthesized copolymer formed a large, thin membrane that covered both the aluminum compounds and the silica gel blocks. The introduction of this complex admixture, combining the copolymer and aluminum sulfate, not only reduced the setting times of the cement paste but also enhanced the mechanical strengths of the mortar compared to using aluminum sulfate alone. The complex admixture led to the formation of katoite, metajennite, and C3A (tricalcium aluminate) in the mortar, demonstrating significant linking effects, whereas pure aluminum sulfate could not completely transform C3S within 24 h. Further addition of silica gel to the complex admixture further shortened the setting times of the paste, slightly reduced compressive strength, but improved flexural strength compared to the initial complex admixture. The silicon components appeared to fill the micropores and mesopores of the mortar, accelerating cement setting and enhancing flexural strength, while slightly decreasing compressive strength. This study contributed to the development of new cementing accelerators with improved hardening properties.
Open AccessAl(SO4)(OH)·5H2O Stemming from Complexation of Aluminum Sulfate with Water-Soluble Ternary Copolymer and further Stabilized by Silica Gel as Effective Admixtures for Enhanced Mortar Cementing
A water-soluble ternary copolymer bearing carboxyl, sulfonic, and amide functional groups was synthesized using ammonium persulfate-catalyzed free radical polymerization in water, resulting in high monomer conversion. This copolymer was then complexed with aluminum sulfate, forming an admixture containing Al(SO4)(OH)·5H2O, which was subsequently combined with silica gel. Characterization revealed that the synthesized copolymer formed a large, thin membrane that covered both the aluminum compounds and the silica gel blocks. The introduction of this complex admixture, combining the copolymer and aluminum sulfate, not only reduced the setting times of the cement paste but also enhanced the mechanical strengths of the mortar compared to using aluminum sulfate alone. The complex admixture led to the formation of katoite, metajennite, and C3A (tricalcium aluminate) in the mortar, demonstrating significant linking effects, whereas pure aluminum sulfate could not completely transform C3S within 24 h. Further addition of silica gel to the complex admixture further shortened the setting times of the paste, slightly reduced compressive strength, but improved flexural strength compared to the initial complex admixture. The silicon components appeared to fill the micropores and mesopores of the mortar, accelerating cement setting and enhancing flexural strength, while slightly decreasing compressive strength. This study contributed to the development of new cementing accelerators with improved hardening properties.
- Open Access
The Coordination of Aluminum Sulfate with a Water-Soluble Block Copolymer Containing Carboxyl, Amide, Sulfonic and Anhydride Groups Providing Both Accelerating and Hardening Effects in Cement Setting
Two water-soluble block copolymers composed of acrylic acid (AA), 2-acrylamido-2-methylpropane sulfonic acid (AMPS), and optionally maleic anhydride (MAH) were synthesized through ammonium persulfate-catalyzed free radical polymerization in water. The introduction of aluminum sulfate (AS) into the resulting mixtures significantly reduced the setting times of the paste and enhanced the mechanical strength of the mortar compared to both the additive-free control and experiments facilitated solely by pure AS. This improvement was primarily attributed to the inhibition of rapid Al3+ hydrolysis, which was achieved through coordination of the synthesized block copolymers, along with the formation of newly identified hydrolytic intermediates. Notably, the ternary copolymer (AA–AMPS–MAH) exhibited superior performance compared to that of the binary copolymer (AA–AMPS). In the early stages of cement setting, clusters of ettringite (AFt) were found to be immobilized over newly detected linkage phases, including unusual calcium silicate hydrate and epistilbite. In contrast to the well-documented role of polymers in retarding cement hydration, this study presents a novel approach by providing both accelerating and hardening agents for cement setting, which has significant implications for the future design of cement additives.
Open AccessThe Coordination of Aluminum Sulfate with a Water-Soluble Block Copolymer Containing Carboxyl, Amide, Sulfonic and Anhydride Groups Providing Both Accelerating and Hardening Effects in Cement Setting
Two water-soluble block copolymers composed of acrylic acid (AA), 2-acrylamido-2-methylpropane sulfonic acid (AMPS), and optionally maleic anhydride (MAH) were synthesized through ammonium persulfate-catalyzed free radical polymerization in water. The introduction of aluminum sulfate (AS) into the resulting mixtures significantly reduced the setting times of the paste and enhanced the mechanical strength of the mortar compared to both the additive-free control and experiments facilitated solely by pure AS. This improvement was primarily attributed to the inhibition of rapid Al3+ hydrolysis, which was achieved through coordination of the synthesized block copolymers, along with the formation of newly identified hydrolytic intermediates. Notably, the ternary copolymer (AA–AMPS–MAH) exhibited superior performance compared to that of the binary copolymer (AA–AMPS). In the early stages of cement setting, clusters of ettringite (AFt) were found to be immobilized over newly detected linkage phases, including unusual calcium silicate hydrate and epistilbite. In contrast to the well-documented role of polymers in retarding cement hydration, this study presents a novel approach by providing both accelerating and hardening agents for cement setting, which has significant implications for the future design of cement additives.
- 17 September 2024
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 422
Fabrication of a novel sensor based on ionic porous polymer microspheres for humidity monitoring
- 17 September 2024
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 422
Fabrication of a novel sensor based on ionic porous polymer microspheres for humidity monitoring