Mercè Vilaseca
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mercè Vilaseca has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Carmen Gutiérrez-Bouzán
Institute of Textile Research and Industrial Cooperation of Terrassa (INTEXTER), Universitat Politècnica de Catalunya—Barcelona Tech, Colom 15, 08222 Terrassa, Spain
3 shared publications - Víctor López-Grimau
Department of Project and Construction Engineering (EPC),Universitat Politecnica de Catalunya,Spain
3 shared publications - Martí Crespi
Univ Politecn Cataluna, Barcelona Tech, Inst Invest Text & Cooperacio Ind Terrassa INTEXT, Colom 15, Terrassa 08222, Spain
1 shared publication - María García-Jiménez
Institute of Textile Research and Industrial Cooperation of Terrassa (INTEXTER), Universitat Politècnica de Catalunya-BarcelonaTech (UPC), C/Colom 15, Terrassa 08222, Spain
1 shared publication - Valentina Buscio
Institute of Textile Research and Industrial Cooperation of Terrassa (INTEXTER), Universitat Politècnica de Catalunya-BarcelonaTECH (UPC), 08034 Barcelona, Spain
1 shared publication
Latest Publications
- Open Access
Reuse of Textile Dyeing Effluents Treated with Coupled Nanofiltration and Electrochemical Processes
The reactive dye Cibacron Yellow S-3R was selected to evaluate the feasibility of combining nanofiltration membranes with electrochemical processes to treat textile wastewater. Synthetic dyeing effluents were treated by means of two nanofiltration membranes, Hydracore10 and Hydracore50. Up to 98% of dye removal was achieved. The influence of salt concentration and pH on membrane treatment was studied. The best dye removal yield was achieved at pH 3 in the presence of 60 g/L of NaCl. After the membrane filtration, the concentrate containing high dye concentration was treated by means of an electrochemical process at three different current densities: 33, 83, and 166 mA/cm2. Results showed a lineal relationship between treatment time and applied current density. Both permeates and electrochemically-decoloured effluents were reused in new dyeing processes (100% of permeate and 70% of decoloured concentrates). Dyed fabrics were evaluated with respect to original dyeing. Colour differences were found to be into the acceptance range.
Open AccessReuse of Textile Dyeing Effluents Treated with Coupled Nanofiltration and Electrochemical Processes
The reactive dye Cibacron Yellow S-3R was selected to evaluate the feasibility of combining nanofiltration membranes with electrochemical processes to treat textile wastewater. Synthetic dyeing effluents were treated by means of two nanofiltration membranes, Hydracore10 and Hydracore50. Up to 98% of dye removal was achieved. The influence of salt concentration and pH on membrane treatment was studied. The best dye removal yield was achieved at pH 3 in the presence of 60 g/L of NaCl. After the membrane filtration, the concentrate containing high dye concentration was treated by means of an electrochemical process at three different current densities: 33, 83, and 166 mA/cm2. Results showed a lineal relationship between treatment time and applied current density. Both permeates and electrochemically-decoloured effluents were reused in new dyeing processes (100% of permeate and 70% of decoloured concentrates). Dyed fabrics were evaluated with respect to original dyeing. Colour differences were found to be into the acceptance range.
- Open Access
- 1 January 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (6) , 2685-2692
Comparison of different wastewater treatments for colour removal of reactive dye baths
The generation of high-coloured wastewater is one of the main environmental problems of the textile industry. Reactive dyes are widely used in the dyeing of cellulosic fibres. However, they have low exhaustion degree (70–90%). The degradation of residual dyes by aerobic biological treatment is very poor, being necessary the application of specific treatments. In this work, three different methods for the removal of reactive dyes were compared: electrochemical treatment, coagulation with Moringa oleifera waste and enzymatic treatment with laccase. Two azo bifunctional dyes with different reactive groups were selected: C.I. Reactive Black 5 (vinyl sulphone) and C.I. Reactive Red 231 (chlorotriazine). The influence of pH (5 and 9) and dye hydrolysis on the decolourisation yield was studied. The electrochemical treatment was the most efficient, with 95–100% colour removal yield. The coagulation with M. oleifera waste also achieved high colour removal efficiency (91–94%). Both methods showed an independent behaviour with respect to pH or dye hydrolysis. The enzymatic treatment should be performed at pH 5. This method was suitable to remove the chlorotriazine dye (92–93% efficiency), whereas the vinyl sulphone one showed a marked dependence on dye hydrolysis: moderately efficient for the hydrolysed dye and highly efficient without hydrolysis. The activity of laccase was not modified by the usual salinity of the reactive dyeing effluent (20 g/L NaCl). Nevertheless, the effluent salinity enhanced the electrochemical and M. oleifera treatment yield.
- 1 January 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (6) , 2685-2692
Open AccessComparison of different wastewater treatments for colour removal of reactive dye baths
The generation of high-coloured wastewater is one of the main environmental problems of the textile industry. Reactive dyes are widely used in the dyeing of cellulosic fibres. However, they have low exhaustion degree (70–90%). The degradation of residual dyes by aerobic biological treatment is very poor, being necessary the application of specific treatments. In this work, three different methods for the removal of reactive dyes were compared: electrochemical treatment, coagulation with Moringa oleifera waste and enzymatic treatment with laccase. Two azo bifunctional dyes with different reactive groups were selected: C.I. Reactive Black 5 (vinyl sulphone) and C.I. Reactive Red 231 (chlorotriazine). The influence of pH (5 and 9) and dye hydrolysis on the decolourisation yield was studied. The electrochemical treatment was the most efficient, with 95–100% colour removal yield. The coagulation with M. oleifera waste also achieved high colour removal efficiency (91–94%). Both methods showed an independent behaviour with respect to pH or dye hydrolysis. The enzymatic treatment should be performed at pH 5. This method was suitable to remove the chlorotriazine dye (92–93% efficiency), whereas the vinyl sulphone one showed a marked dependence on dye hydrolysis: moderately efficient for the hydrolysed dye and highly efficient without hydrolysis. The activity of laccase was not modified by the usual salinity of the reactive dyeing effluent (20 g/L NaCl). Nevertheless, the effluent salinity enhanced the electrochemical and M. oleifera treatment yield.
- Open Access
Valorization of Waste Obtained from Oil Extraction in Moringa Oleifera Seeds: Coagulation of Reactive Dyes in Textile Effluents
Moringa oleifera seeds contain about 40% of highly valued oil due to its wide range of applications, from nutritional issues to cosmetics or biodiesel production. The extraction of Moringa oil generates a waste (65%–75% of seeds weight) which contains a water soluble protein able to be used either in drinking water clarification or wastewater treatment. In this paper, the waste of Moringa oleifera extraction was used as coagulant to remove five reactive dyes from synthetic textile effluents. This waste constitutes a natural coagulant which was demonstrated to be effective for the treatment of industrial reactive dyestuff effluents, characterized by alkaline pH, high NaCl content and hydrolyzed dyes. The coagulation yield increased at high NaCl concentration, whereas the pH did not show any significant effect on dye removal. Moringa oleifera showed better results for dye removal than the conventional treatment of coagulation-flocculation with FeCl3 and polyelectrolyte. Treated water can be reused in new dyeing processes of cotton fabrics with high quality results.
Open AccessValorization of Waste Obtained from Oil Extraction in Moringa Oleifera Seeds: Coagulation of Reactive Dyes in Textile Effluents
Moringa oleifera seeds contain about 40% of highly valued oil due to its wide range of applications, from nutritional issues to cosmetics or biodiesel production. The extraction of Moringa oil generates a waste (65%–75% of seeds weight) which contains a water soluble protein able to be used either in drinking water clarification or wastewater treatment. In this paper, the waste of Moringa oleifera extraction was used as coagulant to remove five reactive dyes from synthetic textile effluents. This waste constitutes a natural coagulant which was demonstrated to be effective for the treatment of industrial reactive dyestuff effluents, characterized by alkaline pH, high NaCl content and hydrolyzed dyes. The coagulation yield increased at high NaCl concentration, whereas the pH did not show any significant effect on dye removal. Moringa oleifera showed better results for dye removal than the conventional treatment of coagulation-flocculation with FeCl3 and polyelectrolyte. Treated water can be reused in new dyeing processes of cotton fabrics with high quality results.