Amin Firouzi
Research Subjects
Amin Firouzi has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Muhammad Remanul Islam
Universiti Kuala Lumpur Malaysian Institute of Industrial Technology
5 shared publications - Ahmad Naim Ahmad Yahaya
Green Chemistry and Sustainability Cluster, Branch Campus Malaysian Institute of Chemical and BioEngineering Technology, Universiti Kuala Lumpur, Alor Gajah 78000, Melaka, Malaysia
3 shared publications - Gulam Smdani
South Dakota Mines
3 shared publications Alessandra Bianco
Department of Enterprise Engineering University of Rome—Tor Vergata INSTM RU Tor Vergata, Viale del Politecnico 00133 Rome Italy
1 shared publicationCostantino Del Gaudio
Department of Enterprise Engineering University of Rome—Tor Vergata INSTM RU Tor Vergata, Viale del Politecnico 00133 Rome Italy
1 shared publication- Francesca Romana Lamastra
Dipartimento di Ingegneria dell’Impresa “Mario Lucertini”, Università degli Studi di Roma “Tor Vergata” and Consorzio INSTM Unità di Ricerca “Roma Tor Vergata”, Via del Politecnico, 00133 Roma, Italy
1 shared publication
Latest Publications
- 25 July 2024
- Published by Springer Nature
- p. 9-14
A Short Communication on the Application of MATLAB in Material Science
- 25 July 2024
- Published by Springer Nature
- p. 9-14
A Short Communication on the Application of MATLAB in Material Science
- 19 March 2023
- Published by Springer Nature
- p. 127-134
Mechanical and Thermal Properties of Polylactic Acid Composites Filled with Iron Particles
- 19 March 2023
- Published by Springer Nature
- p. 127-134
Mechanical and Thermal Properties of Polylactic Acid Composites Filled with Iron Particles
- 1 June 2022
- Published by Springer Nature
- p. 271-287
Rheological and Mechanical Properties of Polyisobutylene Filled with Nanosilica, Zinc Oxide and Titanium Oxide
- 1 June 2022
- Published by Springer Nature
- p. 271-287
Rheological and Mechanical Properties of Polyisobutylene Filled with Nanosilica, Zinc Oxide and Titanium Oxide
- 1 June 2022
- Published by Springer Nature
- p. 253-269
Performance of Graphene Oxide Doped Polyaniline Composite Electrodes for Energy Storage: Effects of In-Situ Synthesis
- 1 June 2022
- Published by Springer Nature
- p. 253-269
Performance of Graphene Oxide Doped Polyaniline Composite Electrodes for Energy Storage: Effects of In-Situ Synthesis
- 1 June 2022
- Published by Springer Nature
- p. 235-251
Physical and Mechanical Properties of Waste Red-Gypsum Based Concrete Composites
- 1 June 2022
- Published by Springer Nature
- p. 235-251
Physical and Mechanical Properties of Waste Red-Gypsum Based Concrete Composites
- 31 July 2014
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 132 (2)
Electrospun polymeric coatings on aluminum alloy as a straightforward approach for corrosion protection
Several metals and alloys are susceptible to corrosion attack and this usually implies the accurate selection of a specific material depending on the working conditions and the characteristics of the environment to which it will be exposed to. However, it could represent a restriction at the same time because a limited range of materials can be practically considered. In addition, they could be also characterized by unsuitable properties for the intended application and high costs. To address this issue, polymeric coatings exhibit high potentiality to be a valid alternative to toxic chromates, allowing to deal with the most appropriate metallic materials and affordable deposition procedures. In this work, polyvinyl alcohol (PVA) fibrous coating was successfully collected onto aluminum alloy‐6082 by means of electrospinning technique. The anticorrosion performance of the final system has been evaluated in 3 wt % NaCl solution by means of electrochemical impedance spectroscopy (EIS). To avoid PVA disintegration in aqueous environment, several crosslinking procedures were assessed using glyoxal. The two most promising ones (120°C for 60 min and 150°C for 15 min) were then considered for a further investigation. Crosslinked PVA mats showed improved properties as compared to the as‐spun case, as demonstrated by mechanical and thermal analyses. Electrochemical tests revealed that crosslinked coatings can protect aluminum substrates against corrosion, especially for the electrospun PVA coating treated at 120°C. In this case, after 270 h, a significant corrosion resistance of about 26 kΩ was recorded with respect to the blank alloy (about 3.8 kΩ). © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41250.
- 31 July 2014
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 132 (2)
Electrospun polymeric coatings on aluminum alloy as a straightforward approach for corrosion protection
Several metals and alloys are susceptible to corrosion attack and this usually implies the accurate selection of a specific material depending on the working conditions and the characteristics of the environment to which it will be exposed to. However, it could represent a restriction at the same time because a limited range of materials can be practically considered. In addition, they could be also characterized by unsuitable properties for the intended application and high costs. To address this issue, polymeric coatings exhibit high potentiality to be a valid alternative to toxic chromates, allowing to deal with the most appropriate metallic materials and affordable deposition procedures. In this work, polyvinyl alcohol (PVA) fibrous coating was successfully collected onto aluminum alloy‐6082 by means of electrospinning technique. The anticorrosion performance of the final system has been evaluated in 3 wt % NaCl solution by means of electrochemical impedance spectroscopy (EIS). To avoid PVA disintegration in aqueous environment, several crosslinking procedures were assessed using glyoxal. The two most promising ones (120°C for 60 min and 150°C for 15 min) were then considered for a further investigation. Crosslinked PVA mats showed improved properties as compared to the as‐spun case, as demonstrated by mechanical and thermal analyses. Electrochemical tests revealed that crosslinked coatings can protect aluminum substrates against corrosion, especially for the electrospun PVA coating treated at 120°C. In this case, after 270 h, a significant corrosion resistance of about 26 kΩ was recorded with respect to the blank alloy (about 3.8 kΩ). © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41250.