Florian Rist
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Florian Rist has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
- Helmut Pottmann
King Abdullah University of Science and Technology (KAUST), Thuwal, Saudi Arabia
5 shared publications - Michael Wimmer
Technische Universität Wien (TU Wien), Vienna, Austria
4 shared publications - Przemyslaw Musialski
New Jersey Institute of Technology (NJIT), Newark, USA
4 shared publications - Daoming Liu
KAUST, Thuwal, Saudi Arabia
3 shared publications - David Hahn
Technische Universität Wien (TU Wien), Vienna, Austria
3 shared publications - Lukas Lipp
TU Wien, Institute of Visual Computing Human-Centered Technology, Vienna, Austria
3 shared publications
Latest Publications
- Open Access
- 8 August 2025
- Published by Association for Computing Machinery (ACM) in Proceedings of the ACM on Computer Graphics and Interactive Techniques
- Vol. 8 (4) , 1-19
FLAMEFORGE: Combustion Simulation of Wooden Structures 50
We propose a unified volumetric combustion simulator that supports general wooden structures capturing the multi-phase combustion of charring materials. Complex geometric structures are represented in a voxel grid for the efficient evaluation of volumetric effects. In addition, a signed distance field is introduced to query the surface information required to compute the insulating effect caused by the char layer. Non-charring materials such as acrylic glass or non-combustible materials such as stone can also be modeled in the simulator. Adaptive data structures are utilized to enable memory-efficient computations within our multiresolution approach. The simulator is qualitatively validated by showcasing the numerical simulation of a variety of scenes covering different kinds of structural configurations and materials. Two-way coupling of our combustion simulator and position-based dynamics is demonstrated capturing characteristic mechanical deformations caused by the combustion process. The volumetric combustion process of wooden structures is further quantitatively assessed by comparing our simulated results to sub-surface measurements of a real-world combustion experiment.
- 8 August 2025
- Published by Association for Computing Machinery (ACM) in Proceedings of the ACM on Computer Graphics and Interactive Techniques
- Vol. 8 (4) , 1-19
Open AccessFLAMEFORGE: Combustion Simulation of Wooden Structures 50
We propose a unified volumetric combustion simulator that supports general wooden structures capturing the multi-phase combustion of charring materials. Complex geometric structures are represented in a voxel grid for the efficient evaluation of volumetric effects. In addition, a signed distance field is introduced to query the surface information required to compute the insulating effect caused by the char layer. Non-charring materials such as acrylic glass or non-combustible materials such as stone can also be modeled in the simulator. Adaptive data structures are utilized to enable memory-efficient computations within our multiresolution approach. The simulator is qualitatively validated by showcasing the numerical simulation of a variety of scenes covering different kinds of structural configurations and materials. Two-way coupling of our combustion simulator and position-based dynamics is demonstrated capturing characteristic mechanical deformations caused by the combustion process. The volumetric combustion process of wooden structures is further quantitatively assessed by comparing our simulated results to sub-surface measurements of a real-world combustion experiment.
- Open Access
- 17 April 2025
- Published by Wiley in Computer Graphics Forum
- Vol. 44 (2)
Inverse Simulation of Radiative Thermal Transport
The early phase of urban planning and architectural design has a great impact on the thermal loads and characteristics of constructed buildings. It is, therefore, important to efficiently simulate thermal effects early on and rectify possible problems. In this paper, we present an inverse simulation of radiative heat transport and a differentiable photon‐tracing approach. Our method utilizes GPU‐accelerated ray tracing to speed up both the forward and adjoint simulation. Moreover, we incorporate matrix compression to further increase the efficiency of our thermal solver and support larger scenes. In addition to our differentiable photon‐tracing approach, we introduce a novel approximate edge sampling scheme that re‐uses primary samples instead of relying on explicit edge samples or auxiliary rays to resolve visibility discontinuities. Our inverse simulation system enables designers to not only predict the temperature distribution, but also automatically optimize the design to improve thermal comfort and avoid problematic configurations. We showcase our approach using several examples in which we optimize the placement of buildings or their facade geometry. Our approach can be used to optimize arbitrary geometric parameterizations and supports steady‐state, as well as transient simulations.
- 17 April 2025
- Published by Wiley in Computer Graphics Forum
- Vol. 44 (2)
Open AccessInverse Simulation of Radiative Thermal Transport
The early phase of urban planning and architectural design has a great impact on the thermal loads and characteristics of constructed buildings. It is, therefore, important to efficiently simulate thermal effects early on and rectify possible problems. In this paper, we present an inverse simulation of radiative heat transport and a differentiable photon‐tracing approach. Our method utilizes GPU‐accelerated ray tracing to speed up both the forward and adjoint simulation. Moreover, we incorporate matrix compression to further increase the efficiency of our thermal solver and support larger scenes. In addition to our differentiable photon‐tracing approach, we introduce a novel approximate edge sampling scheme that re‐uses primary samples instead of relying on explicit edge samples or auxiliary rays to resolve visibility discontinuities. Our inverse simulation system enables designers to not only predict the temperature distribution, but also automatically optimize the design to improve thermal comfort and avoid problematic configurations. We showcase our approach using several examples in which we optimize the placement of buildings or their facade geometry. Our approach can be used to optimize arbitrary geometric parameterizations and supports steady‐state, as well as transient simulations.
- Open Access
- 19 November 2024
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Graphics
- Vol. 43 (6) , 1-17
Quad mesh mechanisms
This paper provides computational tools for the modeling and design of quad mesh mechanisms, which are meshes allowing continuous flexions under the assumption of rigid faces and hinges in the edges. We combine methods and results from different areas, namely differential geometry of surfaces, rigidity and flexibility of bar and joint frameworks, algebraic geometry, and optimization. The basic idea to achieve a time-continuous flexion is time-discretization justified by an algebraic degree argument. We are able to prove computationally feasible bounds on the number of required time instances we need to incorporate in our optimization. For optimization to succeed, an informed initialization is crucial. We present two computational pipelines to achieve that: one based on remeshing isometric surface pairs, another one based on iterative refinement. A third manner of initialization proved very effective: We interactively design meshes which are close to a narrow known class of flexible meshes, but not contained in it. Having enjoyed sufficiently many degrees of freedom during design, we afterwards optimize towards flexibility.
- 19 November 2024
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Graphics
- Vol. 43 (6) , 1-17
Open AccessQuad mesh mechanisms
This paper provides computational tools for the modeling and design of quad mesh mechanisms, which are meshes allowing continuous flexions under the assumption of rigid faces and hinges in the edges. We combine methods and results from different areas, namely differential geometry of surfaces, rigidity and flexibility of bar and joint frameworks, algebraic geometry, and optimization. The basic idea to achieve a time-continuous flexion is time-discretization justified by an algebraic degree argument. We are able to prove computationally feasible bounds on the number of required time instances we need to incorporate in our optimization. For optimization to succeed, an informed initialization is crucial. We present two computational pipelines to achieve that: one based on remeshing isometric surface pairs, another one based on iterative refinement. A third manner of initialization proved very effective: We interactively design meshes which are close to a narrow known class of flexible meshes, but not contained in it. Having enjoyed sufficiently many degrees of freedom during design, we afterwards optimize towards flexibility.
- Open Access
- 19 November 2024
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Graphics
- Vol. 43 (6) , 1-16
A Flexible Mold for Facade Panel Fabrication
Architectural surface panelling often requires fabricating molds for panels, a process that can be cost-inefficient and material-wasteful when using traditional methods such as CNC milling. In this paper, we introduce a novel solution to generating molds for efficiently fabricating architectural panels. At the core of our method is a machine that utilizes a deflatable membrane as a flexible mold. By adjusting the deflation level and boundary element positions, the membrane can be reconfigured into various shapes, allowing for mass customization with significantly lower overhead costs. We devise an efficient algorithm that works in sync with our flexible mold machine that optimizes the placement of customizable boundary element positions, ensuring the fabricated panel matches the geometry of a given input shape: (1) Using a quadratic Weingarten surface arising from a natural assumption on the membrane's stress, we can approximate the initial placement of the boundary element from the input shape's geometry; (2) we solve the inverse problem with a simulator-in-the-loop optimizer by searching for the optimal placement of boundary curves with sensitivity analysis. We validate our approach by fabricating baseline panels and a facade with a wide range of curvature profiles, providing a detailed numerical analysis on simulation and fabrication, demonstrating significant advantages in cost and flexibility.
- 19 November 2024
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Graphics
- Vol. 43 (6) , 1-16
Open AccessA Flexible Mold for Facade Panel Fabrication
Architectural surface panelling often requires fabricating molds for panels, a process that can be cost-inefficient and material-wasteful when using traditional methods such as CNC milling. In this paper, we introduce a novel solution to generating molds for efficiently fabricating architectural panels. At the core of our method is a machine that utilizes a deflatable membrane as a flexible mold. By adjusting the deflation level and boundary element positions, the membrane can be reconfigured into various shapes, allowing for mass customization with significantly lower overhead costs. We devise an efficient algorithm that works in sync with our flexible mold machine that optimizes the placement of customizable boundary element positions, ensuring the fabricated panel matches the geometry of a given input shape: (1) Using a quadratic Weingarten surface arising from a natural assumption on the membrane's stress, we can approximate the initial placement of the boundary element from the input shape's geometry; (2) we solve the inverse problem with a simulator-in-the-loop optimizer by searching for the optimal placement of boundary curves with sensitivity analysis. We validate our approach by fabricating baseline panels and a facade with a wide range of curvature profiles, providing a detailed numerical analysis on simulation and fabrication, demonstrating significant advantages in cost and flexibility.
- Open Access
- 19 November 2024
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Graphics
- Vol. 43 (6) , 1-20
Designing triangle meshes with controlled roughness
Motivated by the emergence of rough surfaces in various areas of design, we address the computational design of triangle meshes with controlled roughness. Our focus lies on small levels of roughness. There, roughness or smoothness mainly arises through the local positioning of the mesh edges and faces with respect to the curvature behavior of the reference surface. The analysis of this interaction between curvature and roughness is simplified by a 2D dual diagram and its generation within so-called isotropic geometry, which may be seen as a structure-preserving simplification of Euclidean geometry. Isotropic dihedral angles of the mesh are close to the Euclidean angles and appear as Euclidean edge lengths in the dual diagram, which also serves as a tool for visualization and interactive local design. We present a computational framework that includes appearance-aware remeshing, optimization-based automatic roughening, and control of dihedral angles.
- 19 November 2024
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Graphics
- Vol. 43 (6) , 1-20
Open AccessDesigning triangle meshes with controlled roughness
Motivated by the emergence of rough surfaces in various areas of design, we address the computational design of triangle meshes with controlled roughness. Our focus lies on small levels of roughness. There, roughness or smoothness mainly arises through the local positioning of the mesh edges and faces with respect to the curvature behavior of the reference surface. The analysis of this interaction between curvature and roughness is simplified by a 2D dual diagram and its generation within so-called isotropic geometry, which may be seen as a structure-preserving simplification of Euclidean geometry. Isotropic dihedral angles of the mesh are close to the Euclidean angles and appear as Euclidean edge lengths in the dual diagram, which also serves as a tool for visualization and interactive local design. We present a computational framework that includes appearance-aware remeshing, optimization-based automatic roughening, and control of dihedral angles.
- 5 July 2024
- Published by Springer Nature
- p. 232-239
Designing an Inclusive Tactile Panoramic Relief of the City of Graz
- 5 July 2024
- Published by Springer Nature
- p. 232-239
Designing an Inclusive Tactile Panoramic Relief of the City of Graz
- Open Access
- 22 May 2024
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Graphics
- Vol. 43 (3) , 1-16
View-Independent Adjoint Light Tracing for Lighting Design Optimization
Differentiable rendering methods promise the ability to optimize various parameters of three-dimensional (3D) scenes to achieve a desired result. However, lighting design has so far received little attention in this field. In this article, we introduce a method that enables continuous optimization of the arrangement of luminaires in a 3D scene via differentiable light tracing. Our experiments show two major issues when attempting to apply existing methods from differentiable path tracing to this problem: First, many rendering methods produce images, which restricts the ability of a designer to define lighting objectives to image space. Second, most previous methods are designed for scene geometry or material optimization and have not been extensively tested for the case of optimizing light sources. Currently available differentiable ray-tracing methods do not provide satisfactory performance, even on fairly basic test cases in our experience. In this article, we propose, to the best of our knowledge, a novel adjoint light tracing method that overcomes these challenges and enables gradient-based lighting design optimization in a view-independent (camera-free) way. Thus, we allow the user to paint illumination targets directly onto the 3D scene or use existing baked illumination data (e.g., light maps). Using modern ray-tracing hardware, we achieve interactive performance. We find light tracing advantageous over path tracing in this setting, as it naturally handles irregular geometry, resulting in less noise and improved optimization convergence. We compare our adjoint gradients to state-of-the-art image-based differentiable rendering methods. We also demonstrate that our gradient data works with various common optimization algorithms, providing good convergence behaviour. Qualitative comparisons with real-world scenes underline the practical applicability of our method.
- 22 May 2024
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Graphics
- Vol. 43 (3) , 1-16
Open AccessView-Independent Adjoint Light Tracing for Lighting Design Optimization
Differentiable rendering methods promise the ability to optimize various parameters of three-dimensional (3D) scenes to achieve a desired result. However, lighting design has so far received little attention in this field. In this article, we introduce a method that enables continuous optimization of the arrangement of luminaires in a 3D scene via differentiable light tracing. Our experiments show two major issues when attempting to apply existing methods from differentiable path tracing to this problem: First, many rendering methods produce images, which restricts the ability of a designer to define lighting objectives to image space. Second, most previous methods are designed for scene geometry or material optimization and have not been extensively tested for the case of optimizing light sources. Currently available differentiable ray-tracing methods do not provide satisfactory performance, even on fairly basic test cases in our experience. In this article, we propose, to the best of our knowledge, a novel adjoint light tracing method that overcomes these challenges and enables gradient-based lighting design optimization in a view-independent (camera-free) way. Thus, we allow the user to paint illumination targets directly onto the 3D scene or use existing baked illumination data (e.g., light maps). Using modern ray-tracing hardware, we achieve interactive performance. We find light tracing advantageous over path tracing in this setting, as it naturally handles irregular geometry, resulting in less noise and improved optimization convergence. We compare our adjoint gradients to state-of-the-art image-based differentiable rendering methods. We also demonstrate that our gradient data works with various common optimization algorithms, providing good convergence behaviour. Qualitative comparisons with real-world scenes underline the practical applicability of our method.
- Open Access
- 1 October 2023
- Published by Wiley in Computer Graphics Forum
- Vol. 42 (7) , e14957
Precomputed Radiative Heat Transport for Efficient Thermal Simulation
Architectural design and urban planning are complex design tasks. Predicting the thermal impact of design choices at interactive rates enhances the ability of designers to improve energy efficiency and avoid problematic heat islands while maintaining design quality. We show how to use and adapt methods from computer graphics to efficiently simulate heat transfer via thermal radiation, thereby improving user guidance in the early design phase of large‐scale construction projects and helping to increase energy efficiency and outdoor comfort. Our method combines a hardware‐accelerated photon tracing approach with a carefully selected finite element discretization, inspired by precomputed radiance transfer. This combination allows us to precompute a radiative transport operator, which we then use to rapidly solve either steady‐state or transient heat transport throughout the entire scene. Our formulation integrates time‐dependent solar irradiation data without requiring changes in the transport operator, allowing us to quickly analyze many different scenarios such as common weather patterns, monthly or yearly averages, or transient simulations spanning multiple days or weeks. We show how our approach can be used for interactive design workflows such as city planning via fast feedback in the early design phase.
- 1 October 2023
- Published by Wiley in Computer Graphics Forum
- Vol. 42 (7) , e14957
Open AccessPrecomputed Radiative Heat Transport for Efficient Thermal Simulation
Architectural design and urban planning are complex design tasks. Predicting the thermal impact of design choices at interactive rates enhances the ability of designers to improve energy efficiency and avoid problematic heat islands while maintaining design quality. We show how to use and adapt methods from computer graphics to efficiently simulate heat transfer via thermal radiation, thereby improving user guidance in the early design phase of large‐scale construction projects and helping to increase energy efficiency and outdoor comfort. Our method combines a hardware‐accelerated photon tracing approach with a carefully selected finite element discretization, inspired by precomputed radiance transfer. This combination allows us to precompute a radiative transport operator, which we then use to rapidly solve either steady‐state or transient heat transport throughout the entire scene. Our formulation integrates time‐dependent solar irradiation data without requiring changes in the transport operator, allowing us to quickly analyze many different scenarios such as common weather patterns, monthly or yearly averages, or transient simulations spanning multiple days or weeks. We show how our approach can be used for interactive design workflows such as city planning via fast feedback in the early design phase.
- Open Access
- 26 July 2023
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Graphics
- Vol. 42 (4) , 1-16
Deployable strip structures
We introduce the new concept of C-mesh to capture kinetic structures that can be deployed from a collapsed state. Quadrilateral C-meshes enjoy rich geometry and surprising relations with differential geometry: A structure that collapses onto a flat and straight strip corresponds to a Chebyshev net of curves on a surface of constant Gaussian curvature, while structures collapsing onto a circular strip follow surfaces which enjoy the linear-Weingarten property. Interestingly, allowing more general collapses actually leads to a smaller class of shapes. Hexagonal C-meshes have more degrees of freedom, but a local analysis suggests that there is no such direct relation to smooth surfaces. Besides theory, this paper provides tools for exploring the shape space of C-meshes and for their design. We also present an application for freeform architectural skins, namely paneling with spherical panels of constant radius, which is an important fabrication-related constraint.
- 26 July 2023
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Graphics
- Vol. 42 (4) , 1-16
Open AccessDeployable strip structures
We introduce the new concept of C-mesh to capture kinetic structures that can be deployed from a collapsed state. Quadrilateral C-meshes enjoy rich geometry and surprising relations with differential geometry: A structure that collapses onto a flat and straight strip corresponds to a Chebyshev net of curves on a surface of constant Gaussian curvature, while structures collapsing onto a circular strip follow surfaces which enjoy the linear-Weingarten property. Interestingly, allowing more general collapses actually leads to a smaller class of shapes. Hexagonal C-meshes have more degrees of freedom, but a local analysis suggests that there is no such direct relation to smooth surfaces. Besides theory, this paper provides tools for exploring the shape space of C-meshes and for their design. We also present an application for freeform architectural skins, namely paneling with spherical panels of constant radius, which is an important fabrication-related constraint.
- Open Access
- 1 August 2021
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Graphics
- Vol. 40 (4) , 1-16
Geometry and tool motion planning for curvature adapted CNC machining
- 1 August 2021
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Graphics
- Vol. 40 (4) , 1-16
Open AccessGeometry and tool motion planning for curvature adapted CNC machining