Lukas Lipp
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lukas Lipp has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Michael Wimmer
Technische Universität Wien (TU Wien), Vienna, Austria
5 shared publications - David Hahn
Technische Universität Wien (TU Wien), Vienna, Austria
3 shared publications - Florian Rist
KAUST
3 shared publications - Christian Freude
Technische Universität Wien (TU Wien), Vienna, Austria
2 shared publications - Adrian Jarabo
Meta Reality Labs Research, Spain
1 shared publication - Bernhard Kerbl
TU Wien Austria
1 shared publication
Latest Publications
- Open Access
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Visualization and Computer Graphics
- Vol. 32 (7) , 4931-4944
Real-Time Rendering Methods With Adaptive Levels of Detail for Fast Rendering of Parametric Objects on Modern GPUs
Parametric functions are an extremely efficient representation for 3D geometry, capable of compactly modelling highly complex objects. Once specified, parametric 3D objects allow for visualization at arbitrary levels of detail (LOD), at no additional memory cost, limited only by the amount of evaluated samples. However, mapping the sample evaluation to the hardware rendering pipelines of modern graphics processing units (GPUs) is not trivial. In this article, we propose a general method for efficient rendering of parametrically-defined 3D objects on modern hardware architectures. Our method adaptively analyzes, allocates and evaluates parametric function samples to produce high-quality renderings. Geometric precision can be modulated from few pixels down to sub-pixel level, enabling real-time frame rates of several 100 frames per second (FPS) for various parametric functions. We propose a dedicated LOD stage, which outputs patches of similar geometric detail to a subsequent rendering stage that uses either a hardware tessellation-based approach or performs point-based software rasterization. Our method requires neither preprocessing nor caching, and the proposed LOD mechanism is fast enough to run each frame. Hence, our approach also lends itself to animated parametric objects. We demonstrate the benefits of our method over a state-of-the-art spherical harmonics (SH) glyph rendering method and over classical LOD approaches, while showing its flexibility on a range of other demanding shapes.
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Visualization and Computer Graphics
- Vol. 32 (7) , 4931-4944
Open AccessReal-Time Rendering Methods With Adaptive Levels of Detail for Fast Rendering of Parametric Objects on Modern GPUs
Parametric functions are an extremely efficient representation for 3D geometry, capable of compactly modelling highly complex objects. Once specified, parametric 3D objects allow for visualization at arbitrary levels of detail (LOD), at no additional memory cost, limited only by the amount of evaluated samples. However, mapping the sample evaluation to the hardware rendering pipelines of modern graphics processing units (GPUs) is not trivial. In this article, we propose a general method for efficient rendering of parametrically-defined 3D objects on modern hardware architectures. Our method adaptively analyzes, allocates and evaluates parametric function samples to produce high-quality renderings. Geometric precision can be modulated from few pixels down to sub-pixel level, enabling real-time frame rates of several 100 frames per second (FPS) for various parametric functions. We propose a dedicated LOD stage, which outputs patches of similar geometric detail to a subsequent rendering stage that uses either a hardware tessellation-based approach or performs point-based software rasterization. Our method requires neither preprocessing nor caching, and the proposed LOD mechanism is fast enough to run each frame. Hence, our approach also lends itself to animated parametric objects. We demonstrate the benefits of our method over a state-of-the-art spherical harmonics (SH) glyph rendering method and over classical LOD approaches, while showing its flexibility on a range of other demanding shapes.
- Open Access
- 29 June 2026
- Published by Association for Computing Machinery (ACM) in Proceedings of the ACM on Computer Graphics and Interactive Techniques
- Vol. 9 (4) , 1-19
High-Performance Real-Time Implicit Strand-Based Hair Rendering via Software Rasterization 58
In this work we propose an efficient deferred software rasterization pipeline for real-time rendering of strand-based hair using hair meshes. Hair plays a crucial role in creating expressive 3D characters, yet strand-based approaches are often restricted to high-end hardware and typically applied to only a small number of hero characters. Hair meshes have proven to be an efficient representation capable of handling a wide variety of groom styles, but existing mesh shader-based implementations still suffer from significant bottlenecks. In this work, we address these limitations with a software rasterization approach that improves performance and compatibility. Our method enables efficient far-field strand-based hair rendering—even at a single sample per pixel—by combining deferred shading with a strand filtering and reconstruction step, while requiring only minimal hardware support. To further enhance scalability, we introduce a level-of-detail (LOD) scheme that adapts hair representation and shading complexity based on viewing distance and screen-space coverage, reducing computational cost further while preserving visual fidelity. To the best of our knowledge, this is the first approach to achieve this combination of efficiency, flexibility, scalability, and broad hardware compatibility.
- 29 June 2026
- Published by Association for Computing Machinery (ACM) in Proceedings of the ACM on Computer Graphics and Interactive Techniques
- Vol. 9 (4) , 1-19
Open AccessHigh-Performance Real-Time Implicit Strand-Based Hair Rendering via Software Rasterization 58
In this work we propose an efficient deferred software rasterization pipeline for real-time rendering of strand-based hair using hair meshes. Hair plays a crucial role in creating expressive 3D characters, yet strand-based approaches are often restricted to high-end hardware and typically applied to only a small number of hero characters. Hair meshes have proven to be an efficient representation capable of handling a wide variety of groom styles, but existing mesh shader-based implementations still suffer from significant bottlenecks. In this work, we address these limitations with a software rasterization approach that improves performance and compatibility. Our method enables efficient far-field strand-based hair rendering—even at a single sample per pixel—by combining deferred shading with a strand filtering and reconstruction step, while requiring only minimal hardware support. To further enhance scalability, we introduce a level-of-detail (LOD) scheme that adapts hair representation and shading complexity based on viewing distance and screen-space coverage, reducing computational cost further while preserving visual fidelity. To the best of our knowledge, this is the first approach to achieve this combination of efficiency, flexibility, scalability, and broad hardware compatibility.
- Open Access
- 17 April 2025
- Published by Wiley in Computer Graphics Forum
- Vol. 44 (2)
Inverse Simulation of Radiative Thermal Transport
The early phase of urban planning and architectural design has a great impact on the thermal loads and characteristics of constructed buildings. It is, therefore, important to efficiently simulate thermal effects early on and rectify possible problems. In this paper, we present an inverse simulation of radiative heat transport and a differentiable photon‐tracing approach. Our method utilizes GPU‐accelerated ray tracing to speed up both the forward and adjoint simulation. Moreover, we incorporate matrix compression to further increase the efficiency of our thermal solver and support larger scenes. In addition to our differentiable photon‐tracing approach, we introduce a novel approximate edge sampling scheme that re‐uses primary samples instead of relying on explicit edge samples or auxiliary rays to resolve visibility discontinuities. Our inverse simulation system enables designers to not only predict the temperature distribution, but also automatically optimize the design to improve thermal comfort and avoid problematic configurations. We showcase our approach using several examples in which we optimize the placement of buildings or their facade geometry. Our approach can be used to optimize arbitrary geometric parameterizations and supports steady‐state, as well as transient simulations.
- 17 April 2025
- Published by Wiley in Computer Graphics Forum
- Vol. 44 (2)
Open AccessInverse Simulation of Radiative Thermal Transport
The early phase of urban planning and architectural design has a great impact on the thermal loads and characteristics of constructed buildings. It is, therefore, important to efficiently simulate thermal effects early on and rectify possible problems. In this paper, we present an inverse simulation of radiative heat transport and a differentiable photon‐tracing approach. Our method utilizes GPU‐accelerated ray tracing to speed up both the forward and adjoint simulation. Moreover, we incorporate matrix compression to further increase the efficiency of our thermal solver and support larger scenes. In addition to our differentiable photon‐tracing approach, we introduce a novel approximate edge sampling scheme that re‐uses primary samples instead of relying on explicit edge samples or auxiliary rays to resolve visibility discontinuities. Our inverse simulation system enables designers to not only predict the temperature distribution, but also automatically optimize the design to improve thermal comfort and avoid problematic configurations. We showcase our approach using several examples in which we optimize the placement of buildings or their facade geometry. Our approach can be used to optimize arbitrary geometric parameterizations and supports steady‐state, as well as transient simulations.
- Open Access
- 22 May 2024
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Graphics
- Vol. 43 (3) , 1-16
View-Independent Adjoint Light Tracing for Lighting Design Optimization
Differentiable rendering methods promise the ability to optimize various parameters of three-dimensional (3D) scenes to achieve a desired result. However, lighting design has so far received little attention in this field. In this article, we introduce a method that enables continuous optimization of the arrangement of luminaires in a 3D scene via differentiable light tracing. Our experiments show two major issues when attempting to apply existing methods from differentiable path tracing to this problem: First, many rendering methods produce images, which restricts the ability of a designer to define lighting objectives to image space. Second, most previous methods are designed for scene geometry or material optimization and have not been extensively tested for the case of optimizing light sources. Currently available differentiable ray-tracing methods do not provide satisfactory performance, even on fairly basic test cases in our experience. In this article, we propose, to the best of our knowledge, a novel adjoint light tracing method that overcomes these challenges and enables gradient-based lighting design optimization in a view-independent (camera-free) way. Thus, we allow the user to paint illumination targets directly onto the 3D scene or use existing baked illumination data (e.g., light maps). Using modern ray-tracing hardware, we achieve interactive performance. We find light tracing advantageous over path tracing in this setting, as it naturally handles irregular geometry, resulting in less noise and improved optimization convergence. We compare our adjoint gradients to state-of-the-art image-based differentiable rendering methods. We also demonstrate that our gradient data works with various common optimization algorithms, providing good convergence behaviour. Qualitative comparisons with real-world scenes underline the practical applicability of our method.
- 22 May 2024
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Graphics
- Vol. 43 (3) , 1-16
Open AccessView-Independent Adjoint Light Tracing for Lighting Design Optimization
Differentiable rendering methods promise the ability to optimize various parameters of three-dimensional (3D) scenes to achieve a desired result. However, lighting design has so far received little attention in this field. In this article, we introduce a method that enables continuous optimization of the arrangement of luminaires in a 3D scene via differentiable light tracing. Our experiments show two major issues when attempting to apply existing methods from differentiable path tracing to this problem: First, many rendering methods produce images, which restricts the ability of a designer to define lighting objectives to image space. Second, most previous methods are designed for scene geometry or material optimization and have not been extensively tested for the case of optimizing light sources. Currently available differentiable ray-tracing methods do not provide satisfactory performance, even on fairly basic test cases in our experience. In this article, we propose, to the best of our knowledge, a novel adjoint light tracing method that overcomes these challenges and enables gradient-based lighting design optimization in a view-independent (camera-free) way. Thus, we allow the user to paint illumination targets directly onto the 3D scene or use existing baked illumination data (e.g., light maps). Using modern ray-tracing hardware, we achieve interactive performance. We find light tracing advantageous over path tracing in this setting, as it naturally handles irregular geometry, resulting in less noise and improved optimization convergence. We compare our adjoint gradients to state-of-the-art image-based differentiable rendering methods. We also demonstrate that our gradient data works with various common optimization algorithms, providing good convergence behaviour. Qualitative comparisons with real-world scenes underline the practical applicability of our method.
- Open Access
- 1 October 2023
- Published by Wiley in Computer Graphics Forum
- Vol. 42 (7) , e14957
Precomputed Radiative Heat Transport for Efficient Thermal Simulation
Architectural design and urban planning are complex design tasks. Predicting the thermal impact of design choices at interactive rates enhances the ability of designers to improve energy efficiency and avoid problematic heat islands while maintaining design quality. We show how to use and adapt methods from computer graphics to efficiently simulate heat transfer via thermal radiation, thereby improving user guidance in the early design phase of large‐scale construction projects and helping to increase energy efficiency and outdoor comfort. Our method combines a hardware‐accelerated photon tracing approach with a carefully selected finite element discretization, inspired by precomputed radiance transfer. This combination allows us to precompute a radiative transport operator, which we then use to rapidly solve either steady‐state or transient heat transport throughout the entire scene. Our formulation integrates time‐dependent solar irradiation data without requiring changes in the transport operator, allowing us to quickly analyze many different scenarios such as common weather patterns, monthly or yearly averages, or transient simulations spanning multiple days or weeks. We show how our approach can be used for interactive design workflows such as city planning via fast feedback in the early design phase.
- 1 October 2023
- Published by Wiley in Computer Graphics Forum
- Vol. 42 (7) , e14957
Open AccessPrecomputed Radiative Heat Transport for Efficient Thermal Simulation
Architectural design and urban planning are complex design tasks. Predicting the thermal impact of design choices at interactive rates enhances the ability of designers to improve energy efficiency and avoid problematic heat islands while maintaining design quality. We show how to use and adapt methods from computer graphics to efficiently simulate heat transfer via thermal radiation, thereby improving user guidance in the early design phase of large‐scale construction projects and helping to increase energy efficiency and outdoor comfort. Our method combines a hardware‐accelerated photon tracing approach with a carefully selected finite element discretization, inspired by precomputed radiance transfer. This combination allows us to precompute a radiative transport operator, which we then use to rapidly solve either steady‐state or transient heat transport throughout the entire scene. Our formulation integrates time‐dependent solar irradiation data without requiring changes in the transport operator, allowing us to quickly analyze many different scenarios such as common weather patterns, monthly or yearly averages, or transient simulations spanning multiple days or weeks. We show how our approach can be used for interactive design workflows such as city planning via fast feedback in the early design phase.