Binbin Luo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Binbin Luo has a total of 162 co-authors. Here are the top co-authors by number of shared publications:
Mingfu Zhao
20 shared publicationsShenghui Shi
Chongqing Key Laboratory of Optical Fiber Sensor and Photoelectric Detection, Chongqing University of Technology, Chongqing, China
17 shared publicationsXue Zou
12 shared publicationsDecao Wu
Chongqing Key Laboratory of Optical Fiber Sensor and Photoelectric Detection, Chongqing University of Technology, Chongqing, China
10 shared publications- Decao Wu
Chongqing Key Laboratory of Optical Fiber Sensor and Photoelectric Detection, Chongqing University of Technology, Chongqing, China
8 shared publications Huafeng Lu
Chongqing Key Laboratory of Optical Fiber Sensor and Photoelectric Detection, Chongqing University of Technology, Chongqing 400054, China
6 shared publications
Latest Publications
- 14 May 2026
- Published by Elsevier in Optics & Laser Technology
- Vol. 203
Multiaxial force tactile sensor based on optical microfiber array for texture and object recognition
- 14 May 2026
- Published by Elsevier in Optics & Laser Technology
- Vol. 203
Multiaxial force tactile sensor based on optical microfiber array for texture and object recognition
- Open Access
- 1 May 2026
- Published by Elsevier in Results in Engineering
- Vol. 30
Non-invasive gesture recognition using PDMS-encapsulated polymer optical fiber Bragg gratings
- 1 May 2026
- Published by Elsevier in Results in Engineering
- Vol. 30
Open AccessNon-invasive gesture recognition using PDMS-encapsulated polymer optical fiber Bragg gratings
- 31 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. PP (1530437X) , 1
Thin-Core Fiber MZI-Based Flexible Tactile Sensors Enable Multi-Perception in Wearables and Robots
Tactile sensors are functional devices that emulate the ability of human skin to perceive external stimuli and play a critical role in healthcare, industrial manufacturing, and virtual reality. In this study, a flexible tactile sensor based on an optical fiber Mach-Zehnder interferometer (MZI) with multifunctional sensing capability is proposed. The sensor adopts an MZI structure encapsulated by polydimethylsiloxane (PDMS) films, in which the MZI is formed by splicing a thin-core fiber (TCF) between two multimode fibers (MMFs). Owing to the high sensitivity of the MZI structure to external stimuli, applied mechanical inputs are converted into variations in optical interference intensity. The proposed sensor exhibits a sensitivity of 1.27 dB/N within a pressure range of 0 to 10 N, along with excellent dynamic response over a frequency range from 0.1 to 200 Hz, a fast response time of 50 ms, and good repeatability and stability. As a proof of concept, the sensor demonstrates the ability to identify object properties such as hardness, texture, and shape. In addition, it enables physiological pulse signal monitoring and can be applied to synchronous and intelligent gesture control of robotic hand. The tactile sensor developed in this work features high sensitivity, a wide measurement range, simple fabrication, and immunity to electromagnetic interference, indicating broad application potential in wearable devices and human-machine interaction (HMI).
- 31 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. PP (1530437X) , 1
Thin-Core Fiber MZI-Based Flexible Tactile Sensors Enable Multi-Perception in Wearables and Robots
Tactile sensors are functional devices that emulate the ability of human skin to perceive external stimuli and play a critical role in healthcare, industrial manufacturing, and virtual reality. In this study, a flexible tactile sensor based on an optical fiber Mach-Zehnder interferometer (MZI) with multifunctional sensing capability is proposed. The sensor adopts an MZI structure encapsulated by polydimethylsiloxane (PDMS) films, in which the MZI is formed by splicing a thin-core fiber (TCF) between two multimode fibers (MMFs). Owing to the high sensitivity of the MZI structure to external stimuli, applied mechanical inputs are converted into variations in optical interference intensity. The proposed sensor exhibits a sensitivity of 1.27 dB/N within a pressure range of 0 to 10 N, along with excellent dynamic response over a frequency range from 0.1 to 200 Hz, a fast response time of 50 ms, and good repeatability and stability. As a proof of concept, the sensor demonstrates the ability to identify object properties such as hardness, texture, and shape. In addition, it enables physiological pulse signal monitoring and can be applied to synchronous and intelligent gesture control of robotic hand. The tactile sensor developed in this work features high sensitivity, a wide measurement range, simple fabrication, and immunity to electromagnetic interference, indicating broad application potential in wearable devices and human-machine interaction (HMI).
- 1 December 2025
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 96 (12)
Advances of semiconductor gas sensor on multi-parameter sensing and features extraction methods
Semiconductor gas sensors have undergone significant advancements in recent years, driven by the growing demand for precise and reliable gas detection in complex environments. This review systematically examines the latest progress in three critical areas: multi-parameter sensing, drift compensation, and feature extraction methodologies. First, we analyze multi-parameter data acquisition techniques, including sensor arrays, temperature modulation, and optical modulation, which have been shown to collectively enhance discrimination accuracy to over 98% for complex gas mixtures. Second, we summarize drift compensation strategies spanning traditional calibration methods to advanced machine learning algorithms, noting that deep learning approaches can maintain classification accuracy above 90% under drift conditions, thus ensuring the environmental adaptability of the sensor. Third, we critically evaluate feature extraction approaches, from conventional time-domain analysis to deep learning-driven methods, emphasizing how to achieve excellent gas recognition performance through feature extraction techniques. Finally, we outline future research directions, including the development of hybrid sensing platforms, adaptive drift-correction frameworks, and explainable algorithm models, to address emerging challenges in industrial, medical, and environmental monitoring applications.
- 1 December 2025
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 96 (12)
Advances of semiconductor gas sensor on multi-parameter sensing and features extraction methods
Semiconductor gas sensors have undergone significant advancements in recent years, driven by the growing demand for precise and reliable gas detection in complex environments. This review systematically examines the latest progress in three critical areas: multi-parameter sensing, drift compensation, and feature extraction methodologies. First, we analyze multi-parameter data acquisition techniques, including sensor arrays, temperature modulation, and optical modulation, which have been shown to collectively enhance discrimination accuracy to over 98% for complex gas mixtures. Second, we summarize drift compensation strategies spanning traditional calibration methods to advanced machine learning algorithms, noting that deep learning approaches can maintain classification accuracy above 90% under drift conditions, thus ensuring the environmental adaptability of the sensor. Third, we critically evaluate feature extraction approaches, from conventional time-domain analysis to deep learning-driven methods, emphasizing how to achieve excellent gas recognition performance through feature extraction techniques. Finally, we outline future research directions, including the development of hybrid sensing platforms, adaptive drift-correction frameworks, and explainable algorithm models, to address emerging challenges in industrial, medical, and environmental monitoring applications.
- 21 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-8
Probe-Type QEPAS Gas Sensor Based on Graded-Index Fiber Collimator
The quartz-enhanced photoacoustic spectroscopy (QEPAS) gas sensor exhibited high sensitivity and excellent gas selectivity without requiring a long optical path cell, offering cost-effectiveness and ease of miniaturization compared to tunable diode laser absorption spectroscopy (TDLAS) and cavity enhance absorption spectroscopy (CEAS) technologies. However, its volume was constrained by the dimensions of the laser collimator and the multi-reflection optical path, limiting further size reduction. This study employed a fusion splice method to combine single-mode fiber, coreless fiber, and graded-index fiber, developing a graded-index fiber collimator specifically tailored for QEPAS. The collimator featured a diameter of only 125 μm while achieving an effective collimation distance exceeding 20 mm. This allowed mechanical integration into the acoustic micro-resonator (MR) using a multi-tube nested coupling method, forming a probe-type structure with dual-MR parallel off-axis alignment and compact dimensions of 16 mm × 3.5 mm. This design significantly reduced the sensor volume while maintaining high sensitivity. Experimental results showed that, using water vapor as the target gas with a laser light source at a wavelength of 1392.53 nm and an average optical power of 10 mW, the amplitude of the second harmonic photoacoustic signal generated by this probe was nearly 26 times higher than that of the bare tuning fork off-axis structure and 1.72 times higher than the conventional gradient-index lens collimation single-MR off-axis structure. The probe’s minimum detectable limit for water vapor reached 0.73 ppm. Its compact design enhances adaptability to various measurement scenarios, offering considerable application value.
- 21 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-8
Probe-Type QEPAS Gas Sensor Based on Graded-Index Fiber Collimator
The quartz-enhanced photoacoustic spectroscopy (QEPAS) gas sensor exhibited high sensitivity and excellent gas selectivity without requiring a long optical path cell, offering cost-effectiveness and ease of miniaturization compared to tunable diode laser absorption spectroscopy (TDLAS) and cavity enhance absorption spectroscopy (CEAS) technologies. However, its volume was constrained by the dimensions of the laser collimator and the multi-reflection optical path, limiting further size reduction. This study employed a fusion splice method to combine single-mode fiber, coreless fiber, and graded-index fiber, developing a graded-index fiber collimator specifically tailored for QEPAS. The collimator featured a diameter of only 125 μm while achieving an effective collimation distance exceeding 20 mm. This allowed mechanical integration into the acoustic micro-resonator (MR) using a multi-tube nested coupling method, forming a probe-type structure with dual-MR parallel off-axis alignment and compact dimensions of 16 mm × 3.5 mm. This design significantly reduced the sensor volume while maintaining high sensitivity. Experimental results showed that, using water vapor as the target gas with a laser light source at a wavelength of 1392.53 nm and an average optical power of 10 mW, the amplitude of the second harmonic photoacoustic signal generated by this probe was nearly 26 times higher than that of the bare tuning fork off-axis structure and 1.72 times higher than the conventional gradient-index lens collimation single-MR off-axis structure. The probe’s minimum detectable limit for water vapor reached 0.73 ppm. Its compact design enhances adaptability to various measurement scenarios, offering considerable application value.
- 7 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (10) , 17144-17152
Plastic Optical Fiber With Spherical Lens Embedded in Mattress for Sleep Monitoring
The quality of sleep is closely related to human health; however, traditional polysomnography is expensive and time-consuming, making it impractical for routine home sleep diagnosis. This study introduces a smart mattress based on a spherical lens enhanced plastic optical fiber sensor. UV-fused silica ball lenses are embedded into PMMA plastic optical fibers, which are then encapsulated with Ecoflex silicone rubber. The smart mattress employs a dual-channel design and collected data from eight subjects in various sleep postures. The signals are transformed into the frequency domain for processing using the Welch power spectral density estimation method. The results indicate that the smart mattress has a mean absolute error of less than 1.92 bpm for heart rate (HR) and 0.95 bpm for respiratory rate (RR). Additionally, consistency analysis was conducted using Bland-Altman analysis and linear regression methods. The results showed that the 95% limits of agreement for HR were -3.047 bpm to 2.915 bpm, with an R² value of 0.95729, and for RR they were -1.741 bpm to 1.380 bpm, with an R² value of 0.9738. Furthermore, Random Forest algorithm was applied to the dataset, successfully classifying between five different sleep behaviors with a classification accuracy of 97.67%. This smart mattress is capable of long-term, stable monitoring of physiological parameters and sleep behavior monitoring, providing a low-cost solution for home sleep monitoring.
- 7 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (10) , 17144-17152
Plastic Optical Fiber With Spherical Lens Embedded in Mattress for Sleep Monitoring
The quality of sleep is closely related to human health; however, traditional polysomnography is expensive and time-consuming, making it impractical for routine home sleep diagnosis. This study introduces a smart mattress based on a spherical lens enhanced plastic optical fiber sensor. UV-fused silica ball lenses are embedded into PMMA plastic optical fibers, which are then encapsulated with Ecoflex silicone rubber. The smart mattress employs a dual-channel design and collected data from eight subjects in various sleep postures. The signals are transformed into the frequency domain for processing using the Welch power spectral density estimation method. The results indicate that the smart mattress has a mean absolute error of less than 1.92 bpm for heart rate (HR) and 0.95 bpm for respiratory rate (RR). Additionally, consistency analysis was conducted using Bland-Altman analysis and linear regression methods. The results showed that the 95% limits of agreement for HR were -3.047 bpm to 2.915 bpm, with an R² value of 0.95729, and for RR they were -1.741 bpm to 1.380 bpm, with an R² value of 0.9738. Furthermore, Random Forest algorithm was applied to the dataset, successfully classifying between five different sleep behaviors with a classification accuracy of 97.67%. This smart mattress is capable of long-term, stable monitoring of physiological parameters and sleep behavior monitoring, providing a low-cost solution for home sleep monitoring.
- 11 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (10) , 4787-4794
High Spatial Resolution Distributed Force Sensor Based on Excessively Tilted Fiber Grating
Distributed and quasi-distributed systems have found extensive applications across various fields. However, their development has been hindered by bulky and expensive demodulation systems and relatively low spatial resolution. We introduced a high spatial resolution distributed force sensor utilizing an excessively tilted fiber grating (ExTFG) encapsulated in PDMS, with the slow axis of the ExTFG oriented perpendicular to the PDMS plane. The transmission spectrum of the ExTFG exhibited differential changes due to variations in contact position and force. In this study, we explained the sensing principle using mode coupling theory and the PM-like characteristics of the ExTFG. A cost-effective optical sensing interrogator collected the transmission spectrum of the sensor, and a CNN-BiLSTM network predicted the contact position and force parameters from the collected spectral data. Experimental results demonstrated a contact position and force prediction resolution of 8.73 μm and 0.02 N, respectively, over a sensing length of 10 mm, significantly smaller than those of traditional distributed or quasi-distributed sensors. Compared to tapered optical fibers (TOF)-based distributed sensors, it offered comparable prediction resolution and a greater sensing length. This sensor exhibited excellent distributed force sensing capabilities and holds promise for applications in electronic skin, human-machine interaction, intelligent robotics, and other fields.
- 11 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (10) , 4787-4794
High Spatial Resolution Distributed Force Sensor Based on Excessively Tilted Fiber Grating
Distributed and quasi-distributed systems have found extensive applications across various fields. However, their development has been hindered by bulky and expensive demodulation systems and relatively low spatial resolution. We introduced a high spatial resolution distributed force sensor utilizing an excessively tilted fiber grating (ExTFG) encapsulated in PDMS, with the slow axis of the ExTFG oriented perpendicular to the PDMS plane. The transmission spectrum of the ExTFG exhibited differential changes due to variations in contact position and force. In this study, we explained the sensing principle using mode coupling theory and the PM-like characteristics of the ExTFG. A cost-effective optical sensing interrogator collected the transmission spectrum of the sensor, and a CNN-BiLSTM network predicted the contact position and force parameters from the collected spectral data. Experimental results demonstrated a contact position and force prediction resolution of 8.73 μm and 0.02 N, respectively, over a sensing length of 10 mm, significantly smaller than those of traditional distributed or quasi-distributed sensors. Compared to tapered optical fibers (TOF)-based distributed sensors, it offered comparable prediction resolution and a greater sensing length. This sensor exhibited excellent distributed force sensing capabilities and holds promise for applications in electronic skin, human-machine interaction, intelligent robotics, and other fields.