FGFuyin Gao

Fuyin Gao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Fuyin Gao has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Study on Damage Mechanisms and Blast Mitigation of GFRPU and Coated Steel Plates

    by Xiaojun Ye, Quanmin Xie, Dongxian Ye, Rui Zhang, Fuyin Gao, Yanshu Fu, Yongkang Xu, Yaoli Hu, Weibo Huang, Longqiang Liang

    Conventional fabrication processes for fiber-reinforced composites are complex and stepwise, limiting their application in blast protection engineering. In this study, KH550 surface-modified glass fiber powder (1.5 wt%) was incorporated into a polyurea matrix, and a homogeneous glass fiber-reinforced polyurea (GFRPU) composite was successfully synthesized via an optimized one-step spray process. The strain-rate-dependent mechanical behavior (0.01–100 s−1), fracture mechanisms, molecular structure, and blast mitigation performance of GFRPU were systematically investigated through mechanical testing, SEM, FTIR, 75 g TNT contact explosion tests, and calibrated and partially verified finite element simulations. Results show that the surface-modified fibers form chemical crosslinks with the matrix, shortening the N–H hydrogen bond length from 3.023 Å to 2.983 Å and increasing the hydrogen bonding degree of the urea carbonyl region from 80.0% to 84.1%, thereby enhancing structural ordering and strength. At a strain rate of 100 s−1, the tensile strength of GFRPU reaches 50.27 MPa, 26% higher than that of the polyurea matrix. Under contact explosion, a 4 mm back-face GFRPU coating reduced the center-point deflection of the steel plate by 31.6% and suppressed brittle cracking, with interfacial debonding and coating tensile failure as the dominant failure modes. Considering protective efficiency and structural safety, 4 mm is recommended as the optimal coating thickness.

  • Open Access

    Study of Blast Mitigation Performance and Fracture Mechanism of Polyurea under Contact Explosion

    by Weibo Huang, Rui Zhang, Xu Wang, Ping Lyu, Jiahui Ju, Fuyin Gao, Shuai Yan

    In order to further study the blast mitigation performance of polyurea and to investigate the protection mechanism and damage characteristics of polyurea-protected structures under contact explosion loads, based on earlier work, this paper investigated the response and energy absorption performance of polyurea under various frequency loads. Qtech T26 blast mitigation polyurea (T26 polyurea) was adopted to protect the reinforced concrete (RC) slab and damage analysis of the post-explosion specimens was carried out at micro and macro levels. The response and energy absorption capacity of the material towards different frequency loads were investigated by dynamic mechanical analysis (DMA). Protective performance of T26 polyurea on RC slab was examined with a 10 kg TNT contact explosion test. Scanning electron microscopy (SEM) was employed to analyze the microscopic fracture morphology of the typical areas of the coating after the explosion. The chemical structure changes of the blast-face coating before and after the explosion were compared by Fourier transform infrared spectroscopy (FTIR). The results show that the glass transition region of T26 polyurea is −40 °C to 10 °C, which is a large temperature range, and the microphase separation of T26 polyurea is low. It is significantly influenced by the ambient temperature and loading frequency. The energy absorption of T26 polyurea is realized through the interaction between the hard and soft segments. When the frequency is between 102 Hz and 106 Hz, the loss factor of T26 polyurea is between 0.20 and 0.31, which exhibits a good energy dissipation performance. In the contact explosion of 10 kg TNT, the fragmentation rate of the coated specimen decreased significantly compared with that of the unprotected specimen, realizing the zero fragmentation protection effect on the back-blast face. The maximum deformation area and the main energy absorption area of T26 polyurea under contact explosion is the ring area outside the longitudinal deformation area. The chemical structure of T26 polyurea changed significantly after the explosion; typically the N-H bonds, etc., were broken and the percentage of hydrogen bonding was reduced. T26 polyurea has realized the protection effect of zero fragmentation of large-equivalent contact explosion, which has a high application value for blast mitigation and blast-fragmentation prevention in actual engineering.