Study on Damage Mechanisms and Blast Mitigation of GFRPU and Coated Steel Plates
Open Access
Abstract
Conventional fabrication processes for fiber-reinforced composites are complex and stepwise, limiting their application in blast protection engineering. In this study, KH550 surface-modified glass fiber powder (1.5 wt%) was incorporated into a polyurea matrix, and a homogeneous glass fiber-reinforced polyurea (GFRPU) composite was successfully synthesized via an optimized one-step spray process. The strain-rate-dependent mechanical behavior (0.01–100 s−1), fracture mechanisms, molecular structure, and blast mitigation performance of GFRPU were systematically investigated through mechanical testing, SEM, FTIR, 75 g TNT contact explosion tests, and calibrated and partially verified finite element simulations. Results show that the surface-modified fibers form chemical crosslinks with the matrix, shortening the N–H hydrogen bond length from 3.023 Å to 2.983 Å and increasing the hydrogen bonding degree of the urea carbonyl region from 80.0% to 84.1%, thereby enhancing structural ordering and strength. At a strain rate of 100 s−1, the tensile strength of GFRPU reaches 50.27 MPa, 26% higher than that of the polyurea matrix. Under contact explosion, a 4 mm back-face GFRPU coating reduced the center-point deflection of the steel plate by 31.6% and suppressed brittle cracking, with interfacial debonding and coating tensile failure as the dominant failure modes. Considering protective efficiency and structural safety, 4 mm is recommended as the optimal coating thickness.Keywords
Funding Information
- Jianghan University (PBSKL2023A10)
- Natural Science Foundation of Jiangxi Province (20242BAB25029)
This publication has 22 references indexed in Scilit:
- Influence of polyurea on dynamic response behaviors of cylindrical composite shells under internal explosion loadComposite Structures, 2023
- Critical review on advancements on the fiber-reinforced composites: Role of fiber/matrix modification on the performance of the fibrous compositesJournal of Materials Research and Technology, 2023
- Recycling of glass fibre reinforced polymer (GFRP) composite wastes in concrete: A critical review and cost benefit analysisStructures, 2023
- Structural damage assessment of RC slab strengthened with POZD coated steel plate under contact explosionStructures, 2022
- Investigation on the influence mechanism of polyurea material property on the blast resistance of polyurea-steel composite plateStructures, 2022
- Damage behavior and assessment of polyurea sprayed reinforced clay brick masonry walls subjected to close-in blast loadsInternational Journal of Impact Engineering, 2022
- Damage response of polyurea-coated steel plates under combined blast and fragments loadingJournal of Constructional Steel Research, 2022
- Mechanical behavior and failure mechanism of polyurea nanocomposites under quasi-static and dynamic compressive loadingDefence Technology, 2021
- Segmental evolution of ultraviolet weathered polyureaJournal of Polymer Research, 2021
- Silane coupling agents used for natural fiber/polymer composites: A reviewComposites Part A: Applied Science and Manufacturing, 2010