Malcolm D. Hudson
Malcolm D. Hudson has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Ian David Williams
School of Engineering, Faculty of Engineering and Physical Sciences, University of Southampton, Highfield Campus, Southampton SO17 1BJ, United Kingdom
11 shared publications - Lina Maria Zapata-Restrepo
Faculty of Engineering and Physical Sciences,University of Southampton,United Kingdom of Great Britain and Northern Ireland
4 shared publications - Paul Anthony Jensen
Department of Biomedical Engineering, University of Michigan
3 shared publications - Gabriela Domínguez-Cortinas
Centre of Applied Research in Environment and Health, Faculty of Medicine,Autonomous University of San Luis Potosi,Mexico
2 shared publications - Guadalupe Vianey Landeros Gonzalez
Faculty of Engineering and the Environment,University of Southampton,United Kingdom of Great Britain and Northern Ireland
2 shared publications - J.F.P. Oaten
Centre for Environmental Science, Faculty of Engineering and the Environment, University of Southampton, University Road, Highfield, Southampton, Hampshire SO17 1BJ, United Kingdom
2 shared publications
Latest Publications
- Open Access
- 12 April 2025
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 197 (5) , 1-17
Microplastics in the European native oyster, Ostrea edulis, to monitoring pollution-related patterns in the Solent region (United Kingdom)
Microplastics (MPs) are the most abundant type of debris in the marine environment, creating a significant threat to aquatic ecosystems due to their persistence, ability to absorb organic pollutants and potential ingestion by marine fauna. Shellfish are particularly vulnerable to MPs accumulation as they filter large volumes of seawater, and they become an important route for human exposure to these particles. This study, the first to examine MPs in European flat oyster (Ostrea edulis) populations, aimed to quantify these particles in the gill and digestive tissues of oysters from the Solent region (southern England). Enzymatic digestion using Proteinase-K was used in this study and MPs were identified in every oyster sampled to determine whether differences in abundance, type and size of MPs exist between locations. Oysters near urban areas contained significantly more MPs than those near rural areas. Fibres were the most prevalent type of MPs, with sizes varying across locations. The study found no significant differences in MPs presence between gills and digestive tissues, and an inverse correlation between the size of MPs and oyster size. The presence of MPs in wild O. edulis could be an additional threat to the survival of an already threatened species and may pose health risks for predatory species and human consumers of seafood. The use of O. edulis as a biomonitoring species for marine MPs pollution could help determine the extent, distribution and sources of MPs, potentially informing management strategies to reduce pollution.
- 12 April 2025
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 197 (5) , 1-17
Open AccessMicroplastics in the European native oyster, Ostrea edulis, to monitoring pollution-related patterns in the Solent region (United Kingdom)
Microplastics (MPs) are the most abundant type of debris in the marine environment, creating a significant threat to aquatic ecosystems due to their persistence, ability to absorb organic pollutants and potential ingestion by marine fauna. Shellfish are particularly vulnerable to MPs accumulation as they filter large volumes of seawater, and they become an important route for human exposure to these particles. This study, the first to examine MPs in European flat oyster (Ostrea edulis) populations, aimed to quantify these particles in the gill and digestive tissues of oysters from the Solent region (southern England). Enzymatic digestion using Proteinase-K was used in this study and MPs were identified in every oyster sampled to determine whether differences in abundance, type and size of MPs exist between locations. Oysters near urban areas contained significantly more MPs than those near rural areas. Fibres were the most prevalent type of MPs, with sizes varying across locations. The study found no significant differences in MPs presence between gills and digestive tissues, and an inverse correlation between the size of MPs and oyster size. The presence of MPs in wild O. edulis could be an additional threat to the survival of an already threatened species and may pose health risks for predatory species and human consumers of seafood. The use of O. edulis as a biomonitoring species for marine MPs pollution could help determine the extent, distribution and sources of MPs, potentially informing management strategies to reduce pollution.
- 24 January 2025
- Published by Eurowaste SRL in Detritus
- No. 30,p. 84-98
Where do they go? A review of the wastewater treatment process and its impact on the fate of microplastics
Wastewater treatment plants (WWTPs) are facilities designed to sanitise wastewater (WW) from different sources. A WW treatment process combines physical, chemical and biological reactions divided into 3 or 4 stages, according to the effluent standards of each site. WWTPs are intended to remove certain pollutants from the water stream, but not microplastics (MPs), plastic particles ranging from 5 mm to 1 µm. WWTPs work as source and destination for MPs. This review provides an insight into the stages included in WW treatment processes according to different technologies employed, alongside a critical evaluation of their influence on MPs. Relevant information and knowledge gaps have been identified. The removal of MPs depends on a variety of factors than just the type of incoming water or WWTP location. The most significant removal of MPs from WW occurs during the preliminary and primary stages. MPs removal efficiency fluctuates depending on the systems operating during the secondary and tertiary phases. As the comparison of information between studies is complicated due to the units and terms used to report and label the collected WW, we recommend that (1) kg/day units are applied if mass balance is of interest, and number of particles per L/day, considering the flow rate data from the sampling dates or annual average flow; (2) to further explain the selection criteria to classify MPs based on their size; and (3) to reach a consensus to name and identify the sampling points, such as the raw WW and effluent from the next stages.
- 24 January 2025
- Published by Eurowaste SRL in Detritus
- No. 30,p. 84-98
Where do they go? A review of the wastewater treatment process and its impact on the fate of microplastics
Wastewater treatment plants (WWTPs) are facilities designed to sanitise wastewater (WW) from different sources. A WW treatment process combines physical, chemical and biological reactions divided into 3 or 4 stages, according to the effluent standards of each site. WWTPs are intended to remove certain pollutants from the water stream, but not microplastics (MPs), plastic particles ranging from 5 mm to 1 µm. WWTPs work as source and destination for MPs. This review provides an insight into the stages included in WW treatment processes according to different technologies employed, alongside a critical evaluation of their influence on MPs. Relevant information and knowledge gaps have been identified. The removal of MPs depends on a variety of factors than just the type of incoming water or WWTP location. The most significant removal of MPs from WW occurs during the preliminary and primary stages. MPs removal efficiency fluctuates depending on the systems operating during the secondary and tertiary phases. As the comparison of information between studies is complicated due to the units and terms used to report and label the collected WW, we recommend that (1) kg/day units are applied if mass balance is of interest, and number of particles per L/day, considering the flow rate data from the sampling dates or annual average flow; (2) to further explain the selection criteria to classify MPs based on their size; and (3) to reach a consensus to name and identify the sampling points, such as the raw WW and effluent from the next stages.
- 19 November 2024
- Published by Eurowaste SRL in Detritus
- Vol. 29 (29) , 27-41
A review of potential physical and chemical markers for tyre and road wear particles
Plastic pollution poses a substantial environmental challenge on global scale. Recently, tyre and road wear particles (TRWPs) have been recognized as a source of microplastic pollution to the freshwater environment. Whilst there is a growing concern regarding the potential environmental effects of microplastics, TRWPs are especially concerning because of the additives they have. These additives are utilised in the manufacturing of tyres; persist in the final product; become environmentally available; and may pose significant threats to an ecosystem. A current issue is the identification of specific constituents of TRWPs responsible for these threats. A comprehensive review of the existing literature is presented focusing on the physical and chemical characteristics of TRWPs with the aim to identify suitable marker(s). Wear particles derived from tyre tread possess distinctive a sausage shape that is exclusive to TRWPs. A range of chemical additives linked to tyres have been employed to quantify TRWPs, overlooking other potential sources such as brake wear and exhaust emissions. We found that significant amounts of 6PPD is used for the formulation of tyres, which is why 6PPD, and a comparatively stable transformation product 6PPD-quinone, could be used for the identification of TRWPs. We recommend that sampling and analysis methods be thoroughly documented to enhance the reproducibility.
- 19 November 2024
- Published by Eurowaste SRL in Detritus
- Vol. 29 (29) , 27-41
A review of potential physical and chemical markers for tyre and road wear particles
Plastic pollution poses a substantial environmental challenge on global scale. Recently, tyre and road wear particles (TRWPs) have been recognized as a source of microplastic pollution to the freshwater environment. Whilst there is a growing concern regarding the potential environmental effects of microplastics, TRWPs are especially concerning because of the additives they have. These additives are utilised in the manufacturing of tyres; persist in the final product; become environmentally available; and may pose significant threats to an ecosystem. A current issue is the identification of specific constituents of TRWPs responsible for these threats. A comprehensive review of the existing literature is presented focusing on the physical and chemical characteristics of TRWPs with the aim to identify suitable marker(s). Wear particles derived from tyre tread possess distinctive a sausage shape that is exclusive to TRWPs. A range of chemical additives linked to tyres have been employed to quantify TRWPs, overlooking other potential sources such as brake wear and exhaust emissions. We found that significant amounts of 6PPD is used for the formulation of tyres, which is why 6PPD, and a comparatively stable transformation product 6PPD-quinone, could be used for the identification of TRWPs. We recommend that sampling and analysis methods be thoroughly documented to enhance the reproducibility.
- 19 November 2024
- Published by Eurowaste SRL in Detritus
- Vol. 29 (29) , 150-166
Ecotoxicological assessment of waste scrubber water in unicellular algae (Tetraselmis suecica) and Blue Mussel (Mytilus edulis) larvae
Marine scrubbers can be classified into wet and dry scrubbers. Scrubber water (also known as washwater) from both wet scrubber systems has been found to release acidic water containing nutrients and contaminants back to the marine environment, including metals, aromatic hydrocarbons, and soot particles. This is especially true for the open-loop scrubbers that utilize the natural alkalinity of seawater and keep a high flow of process water in order to reduce SO2 in the exhaust and the washwater is discharged to sea, most often without substantial treatment. Little is known about potential impact of the discharged washwater on the marine environment. In ecotoxicological tests, a number of marine organisms have shown negative effects after acute and chronic exposures to varying concentrations of scrubber water, but the main pollutants involved in these responses are not clear yet. The aim of this study was to evaluate the effect of the main pollutants found in open-loop scrubber discharge water for survival, feeding and development of different species at the base of the food web after acute exposures to gas scrubber effluent. Toxicity, mortality, and physiology have been evaluated in marine microalgae, Tetraselmis suecica, and blue mussel (Mytilus edulis) larvae. Direct exposure to scrubber water appears to adversely affect biological and reproductive parameters in invertebrates, raising substantial concerns about ongoing open-loop exhaust gas scrubber system deployment.
- 19 November 2024
- Published by Eurowaste SRL in Detritus
- Vol. 29 (29) , 150-166
Ecotoxicological assessment of waste scrubber water in unicellular algae (Tetraselmis suecica) and Blue Mussel (Mytilus edulis) larvae
Marine scrubbers can be classified into wet and dry scrubbers. Scrubber water (also known as washwater) from both wet scrubber systems has been found to release acidic water containing nutrients and contaminants back to the marine environment, including metals, aromatic hydrocarbons, and soot particles. This is especially true for the open-loop scrubbers that utilize the natural alkalinity of seawater and keep a high flow of process water in order to reduce SO2 in the exhaust and the washwater is discharged to sea, most often without substantial treatment. Little is known about potential impact of the discharged washwater on the marine environment. In ecotoxicological tests, a number of marine organisms have shown negative effects after acute and chronic exposures to varying concentrations of scrubber water, but the main pollutants involved in these responses are not clear yet. The aim of this study was to evaluate the effect of the main pollutants found in open-loop scrubber discharge water for survival, feeding and development of different species at the base of the food web after acute exposures to gas scrubber effluent. Toxicity, mortality, and physiology have been evaluated in marine microalgae, Tetraselmis suecica, and blue mussel (Mytilus edulis) larvae. Direct exposure to scrubber water appears to adversely affect biological and reproductive parameters in invertebrates, raising substantial concerns about ongoing open-loop exhaust gas scrubber system deployment.
- Open Access
- 27 December 2023
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 31 (4) , 6437-6459
Assessment of the estuarine shoreline microplastics and mesoplastics of the River Itchen, Southampton (UK) for contaminants and for their interaction with invertebrate fauna
The presence of shoreline microplastics (1–5 mm) and mesoplastics (5–25 mm) in estuarine ecosystems is ubiquitous, but there remains little data on their composition, contamination status and ecological impacts. Chessel Bay Nature Reserve, situated in the internationally protected Itchen Estuary in Southampton, UK, has serious issues with shoreline plastic accumulation. In evaluating potentially adverse ecological impacts, the influence of quantities of shoreline microplastic (mp) and mesoplastic (MeP) material and adsorbed contaminants (PAHs and trace metals) on the biometrics and population dynamics of the burrowing supralittoral amphipod, Orchestia gammarellus, was assessed in this study. mp/MeP concentrations were variable in surface (0–42%: 0–422,640 mg/kg dry sediment) and subsurface horizons (0.001–10%: 11—97,797 mg/kg dry sediment). Secondary microplastics accounted for 77% of the total microplastic load (dominated by fragments and foams), but also comprised 23% nurdles/pellets (primary microplastics). Sorption mechanisms between contaminants and natural sediments were proposed to be the main contributor to the retention of PAHs and trace metal contaminants and less so, by mp/MeP. O. gammarellus populations showed a positive correlation with microplastic concentrations (Spearman correlation, R = 0.665, p = 0.036). Some reported toxicological thresholds were exceeded in sediments, but no impacts related to chemical contaminant concentrations were demonstrated. This study highlights a protected site with the severe plastic contamination, and the difficulty in demonstrating in situ ecotoxicological impacts.
- 27 December 2023
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 31 (4) , 6437-6459
Open AccessAssessment of the estuarine shoreline microplastics and mesoplastics of the River Itchen, Southampton (UK) for contaminants and for their interaction with invertebrate fauna
The presence of shoreline microplastics (1–5 mm) and mesoplastics (5–25 mm) in estuarine ecosystems is ubiquitous, but there remains little data on their composition, contamination status and ecological impacts. Chessel Bay Nature Reserve, situated in the internationally protected Itchen Estuary in Southampton, UK, has serious issues with shoreline plastic accumulation. In evaluating potentially adverse ecological impacts, the influence of quantities of shoreline microplastic (mp) and mesoplastic (MeP) material and adsorbed contaminants (PAHs and trace metals) on the biometrics and population dynamics of the burrowing supralittoral amphipod, Orchestia gammarellus, was assessed in this study. mp/MeP concentrations were variable in surface (0–42%: 0–422,640 mg/kg dry sediment) and subsurface horizons (0.001–10%: 11—97,797 mg/kg dry sediment). Secondary microplastics accounted for 77% of the total microplastic load (dominated by fragments and foams), but also comprised 23% nurdles/pellets (primary microplastics). Sorption mechanisms between contaminants and natural sediments were proposed to be the main contributor to the retention of PAHs and trace metal contaminants and less so, by mp/MeP. O. gammarellus populations showed a positive correlation with microplastic concentrations (Spearman correlation, R = 0.665, p = 0.036). Some reported toxicological thresholds were exceeded in sediments, but no impacts related to chemical contaminant concentrations were demonstrated. This study highlights a protected site with the severe plastic contamination, and the difficulty in demonstrating in situ ecotoxicological impacts.
- Open Access
- 11 July 2023
- Published by MDPI AG in Atmosphere
- Vol. 14 (7) , 1135
Atmospheric Pollution in Port Cities
Authoritative, trustworthy, continual, automatic hourly air quality monitoring is a relatively recent innovation. The task of reliably identifying long-term trends in air quality is therefore very challenging, as well as complex. Ports are major sources of atmospheric pollution, which is linked to marine traffic and increased road traffic congestion. This study investigated the long-term trends and drivers of atmospheric pollution in the port cities of Houston, London, and Southampton in 2000–2019. Authoritative air quality and meteorological data for seven sites at these three locations were meticulously selected alongside available traffic count data. Data were acquired for sites close to the port and sites that were near the city centre to determine whether the port emissions were influencing different parts of the city. Openair software was used for plots and statistical analyses. Pollutant concentrations at Houston, Southampton and Thurrock (London) slowly reduced over time and did not exceed national limits, in contrast to NO2 and PM10 concentrations at London Marylebone Road. Drivers of atmospheric pollution include meteorology, geographical and temporal variation, and traffic flow. Statistically significant relationships (p < 0.001) between atmospheric pollution concentration and meteorology across most sites were found, but this was not seen with traffic flows in London and Southampton. However, port emissions and the other drivers of atmospheric pollution act together to govern the air quality in the city.
- 11 July 2023
- Published by MDPI AG in Atmosphere
- Vol. 14 (7) , 1135
Open AccessAtmospheric Pollution in Port Cities
Authoritative, trustworthy, continual, automatic hourly air quality monitoring is a relatively recent innovation. The task of reliably identifying long-term trends in air quality is therefore very challenging, as well as complex. Ports are major sources of atmospheric pollution, which is linked to marine traffic and increased road traffic congestion. This study investigated the long-term trends and drivers of atmospheric pollution in the port cities of Houston, London, and Southampton in 2000–2019. Authoritative air quality and meteorological data for seven sites at these three locations were meticulously selected alongside available traffic count data. Data were acquired for sites close to the port and sites that were near the city centre to determine whether the port emissions were influencing different parts of the city. Openair software was used for plots and statistical analyses. Pollutant concentrations at Houston, Southampton and Thurrock (London) slowly reduced over time and did not exceed national limits, in contrast to NO2 and PM10 concentrations at London Marylebone Road. Drivers of atmospheric pollution include meteorology, geographical and temporal variation, and traffic flow. Statistically significant relationships (p < 0.001) between atmospheric pollution concentration and meteorology across most sites were found, but this was not seen with traffic flows in London and Southampton. However, port emissions and the other drivers of atmospheric pollution act together to govern the air quality in the city.
- Open Access
- 30 September 2022
- Published by Eurowaste SRL in Detritus
- Vol. 20 (20) , 41-55
A Review of the Origins of Microplastics arriving at Wastewater Treatment Plants
Concerns regarding the impacts of microplastics in the global environment have brought into focus the need to understand better their origins, transport, and fate. Wastewaters (WW) are important in this regard: discharges from households, commercial and industrial premises, and surface run-off deliver microplastics to wastewater treatment plants (WWTPs) via sewerage systems, through which they are removed along with sewage sludge or destined for release into the environment in treated effluent. This review provides a contemporary and critical analysis of factors influencing the quantities and composition of microplastics (MPs) reaching wastewater treatment plants, including both primary and secondary sources. Three specific areas of concern were highlighted. First, current legislation, where present, needs to address regulation of microplastics in personal care and cosmetic products that cross international borders. Secondly, accurate estimation of microplastics arising from some sources and activities (e.g., mis-managed waste and hand washing of textiles) is challenging and estimated contributions of associated microplastics remain unsatisfactory as a basis for management decisions. Thirdly, information relating to microplastics in personal care and cosmetic products used by male consumers is lacking and contributions of such products to wastewater remain uncertain. We recommend that (1) voluntary practices and programmes should be replaced with formal regulation to achieve compliance, and (2) the role of consumers’ behaviour in generating microplastics that are destined for wastewater treatment plants remains largely unknown and that more research in this domain is needed.
- 30 September 2022
- Published by Eurowaste SRL in Detritus
- Vol. 20 (20) , 41-55
Open AccessA Review of the Origins of Microplastics arriving at Wastewater Treatment Plants
Concerns regarding the impacts of microplastics in the global environment have brought into focus the need to understand better their origins, transport, and fate. Wastewaters (WW) are important in this regard: discharges from households, commercial and industrial premises, and surface run-off deliver microplastics to wastewater treatment plants (WWTPs) via sewerage systems, through which they are removed along with sewage sludge or destined for release into the environment in treated effluent. This review provides a contemporary and critical analysis of factors influencing the quantities and composition of microplastics (MPs) reaching wastewater treatment plants, including both primary and secondary sources. Three specific areas of concern were highlighted. First, current legislation, where present, needs to address regulation of microplastics in personal care and cosmetic products that cross international borders. Secondly, accurate estimation of microplastics arising from some sources and activities (e.g., mis-managed waste and hand washing of textiles) is challenging and estimated contributions of associated microplastics remain unsatisfactory as a basis for management decisions. Thirdly, information relating to microplastics in personal care and cosmetic products used by male consumers is lacking and contributions of such products to wastewater remain uncertain. We recommend that (1) voluntary practices and programmes should be replaced with formal regulation to achieve compliance, and (2) the role of consumers’ behaviour in generating microplastics that are destined for wastewater treatment plants remains largely unknown and that more research in this domain is needed.
- 1 January 2022
- Published by Elsevier in Science of The Total Environment
- Vol. 805, 150227
Evidence of underestimation in microplastic research: A meta-analysis of recovery rate studies
- 1 January 2022
- Published by Elsevier in Science of The Total Environment
- Vol. 805, 150227
Evidence of underestimation in microplastic research: A meta-analysis of recovery rate studies
- Open Access
- 21 October 2020
- Published by Springer Nature in Scientific Reports
- Vol. 10 (1) , 1-7
Validation of a method to quantify microfibres present in aquatic surface microlayers
Many of the methods for microplastics quantification in the environment are criticised creating problems with data validity. Quantification of microplastics in the surface microlayer of aquatic environments using glass plate dipping holds promise as a simple field method, but its efficiency has yet to be validated. We tested a standard glass plate dipping method to assess recovery of four common polymer microfibres and two common natural fibres, under three different salinities (freshwater, brackish water, saltwater). Overall recovery rates were low (26.8 ± 1.54%) but higher recoveries were observed under saltwater treatments (36.5 ± 3.01%) than brackish water (24.5 ± 1.92%) or freshwater (19.3 ± 1.92%). The fibre types showed different recovery rates, with acrylic yielding significantly higher recovery rates (37.0 ± 2.71%) than other fibres across treatments. No clear relationship between the density of the fibres and the recovery efficiency was seen. We suggest that, where this method is used for monitoring microplastics, the results will typically underestimate the total amount present, but that recovery is sufficiently consistent to allow comparison of differences between sampling locations. When comparing data across river-estuarine or similar transects salinity should be monitored to account for salinity-induced differences in sampling recovery.
- 21 October 2020
- Published by Springer Nature in Scientific Reports
- Vol. 10 (1) , 1-7
Open AccessValidation of a method to quantify microfibres present in aquatic surface microlayers
Many of the methods for microplastics quantification in the environment are criticised creating problems with data validity. Quantification of microplastics in the surface microlayer of aquatic environments using glass plate dipping holds promise as a simple field method, but its efficiency has yet to be validated. We tested a standard glass plate dipping method to assess recovery of four common polymer microfibres and two common natural fibres, under three different salinities (freshwater, brackish water, saltwater). Overall recovery rates were low (26.8 ± 1.54%) but higher recoveries were observed under saltwater treatments (36.5 ± 3.01%) than brackish water (24.5 ± 1.92%) or freshwater (19.3 ± 1.92%). The fibre types showed different recovery rates, with acrylic yielding significantly higher recovery rates (37.0 ± 2.71%) than other fibres across treatments. No clear relationship between the density of the fibres and the recovery efficiency was seen. We suggest that, where this method is used for monitoring microplastics, the results will typically underestimate the total amount present, but that recovery is sufficiently consistent to allow comparison of differences between sampling locations. When comparing data across river-estuarine or similar transects salinity should be monitored to account for salinity-induced differences in sampling recovery.
- Top Cited PapersOpen Access
- 1 May 2019
- Published by Elsevier in Marine Pollution Bulletin
- Vol. 142, 384-393
Evaluation of existing methods to extract microplastics from bivalve tissue: Adapted KOH digestion protocol improves filtration at single-digit pore size
- 1 May 2019
- Published by Elsevier in Marine Pollution Bulletin
- Vol. 142, 384-393
Top Cited PapersOpen AccessEvaluation of existing methods to extract microplastics from bivalve tissue: Adapted KOH digestion protocol improves filtration at single-digit pore size