Damian Derlukiewicz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Damian Derlukiewicz has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Jakub Andruszko
Department of Machine, Vehicle Design and Research, Faculty of Mechanical Engineering, Wrocław University of Science and Technology, Łukasiewicza 7/9, 50-370 Wrocław, Poland
3 shared publications - Mariusz Ptak
Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, Lukasiewicza 7/9, 50-371 Wroclaw, Poland
3 shared publications - Sebastian Koziołek
Wroclaw University of Science and Technology
2 shared publications Katarzyna Mielniczyn
Wrocław University of Technology
1 shared publication- Maciej Cieślak
Research Institute Future Transport and Cities, Coventry University, Coventry, UK
1 shared publication - Marek Mysior
Wroclaw University of Science and Technology
1 shared publication
Latest Publications
- Open Access
Integration of Numerical and Experimental Methods to Improve the Safety of Working Machines Through Machine Structure Fault Detection and Diagnosis
This paper presents an integrated numerical and experimental methodology for process-based condition monitoring, early-stage fault detection, and diagnosis to improve the operational safety and structural integrity of remotely operated working machines. Because operators have limited perception of hazardous conditions (e.g., resonance, high vibration, and transient dynamic loads), emerging faults may remain unnoticed. The framework identifies and tracks key diagnostic parameters—especially dynamic load indicators—enabling early detection of abnormal events that can initiate damage in the load-carrying structure and other critical components. A key challenge in designing and deploying such machines is limited knowledge of the occurrence, characteristics, and frequency of dynamic loads in real operations. Underestimating these loads during design can cause unexpected failures and reduced fatigue life. The approach integrates numerical strength simulations with sensor data collected during operation, correlating process signals with complex loading scenarios and hazard states. By combining model-based assessment with experimental validation, the method supports systematic process supervision and fault diagnosis under variable operating conditions. The methodology is demonstrated on an ARE 3.0 remotely operated machine case study and shows how data-informed loading characterization and early anomaly detection can enhance safety and support fatigue-oriented durability assessment.
Open AccessIntegration of Numerical and Experimental Methods to Improve the Safety of Working Machines Through Machine Structure Fault Detection and Diagnosis
This paper presents an integrated numerical and experimental methodology for process-based condition monitoring, early-stage fault detection, and diagnosis to improve the operational safety and structural integrity of remotely operated working machines. Because operators have limited perception of hazardous conditions (e.g., resonance, high vibration, and transient dynamic loads), emerging faults may remain unnoticed. The framework identifies and tracks key diagnostic parameters—especially dynamic load indicators—enabling early detection of abnormal events that can initiate damage in the load-carrying structure and other critical components. A key challenge in designing and deploying such machines is limited knowledge of the occurrence, characteristics, and frequency of dynamic loads in real operations. Underestimating these loads during design can cause unexpected failures and reduced fatigue life. The approach integrates numerical strength simulations with sensor data collected during operation, correlating process signals with complex loading scenarios and hazard states. By combining model-based assessment with experimental validation, the method supports systematic process supervision and fault diagnosis under variable operating conditions. The methodology is demonstrated on an ARE 3.0 remotely operated machine case study and shows how data-informed loading characterization and early anomaly detection can enhance safety and support fatigue-oriented durability assessment.
- Open Access
- 23 December 2025
- Published by MDPI AG in Engineering Proceedings
- Vol. 119 (1) , 38
Development of a Method for Monitoring the Condition of Remotely Controlled Demolition Robot to Prevent Structural Failures
This paper presents a methodology for monitoring the structural condition of remotely controlled demolition robots to prevent failures and extend service life. The approach integrates finite element method (FEM) simulations with strain gauge and vibroacoustic measurements. Iterative calibration of numerical models enabled accurate mapping of stress distribution, while optimal sensor placement improved monitoring precision. The study examined the impact of operational loads on durability and vibration resistance of critical components. The developed system enhances safety, operational efficiency, and structural reliability, providing a practical framework for predictive maintenance of demolition robots.
- 23 December 2025
- Published by MDPI AG in Engineering Proceedings
- Vol. 119 (1) , 38
Open AccessDevelopment of a Method for Monitoring the Condition of Remotely Controlled Demolition Robot to Prevent Structural Failures
This paper presents a methodology for monitoring the structural condition of remotely controlled demolition robots to prevent failures and extend service life. The approach integrates finite element method (FEM) simulations with strain gauge and vibroacoustic measurements. Iterative calibration of numerical models enabled accurate mapping of stress distribution, while optimal sensor placement improved monitoring precision. The study examined the impact of operational loads on durability and vibration resistance of critical components. The developed system enhances safety, operational efficiency, and structural reliability, providing a practical framework for predictive maintenance of demolition robots.
- Open Access
- 13 July 2024
- Published by Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne in Eksploatacja i Niezawodność – Maintenance and Reliability
- Vol. 26 (4)
Enhancing Demolition Works Safety: Integrating Numerical and Experimental Methods for Structural Failure Prevention in Remote-Controlled Demolition Robots.
The paper presents an approach that combines numerical and experimental techniques to evaluate the possibility of failure prevention of the structure of demolition robots. Based on a real example of the machine, the possibility of application and development of the author's method was presented. The main problem when designing this type of machine is the negligible knowledge of how dynamic loads act during operation and how many times they appear. Underestimating the loads and their cycles when designing these types of machines can cause them to become damaged quickly. The method presented in the article allows to solve the problem of determining the key parameters needed in the evaluation of this type of construction such as loads, but also allows to determine the number of load cycles, which is particularly important for fatigue. The result presented in the article is an authors’ method that allows determining the fatigue of the structure of a demolition machine by combining numerical and experimental techniques.
- 13 July 2024
- Published by Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne in Eksploatacja i Niezawodność – Maintenance and Reliability
- Vol. 26 (4)
Open AccessEnhancing Demolition Works Safety: Integrating Numerical and Experimental Methods for Structural Failure Prevention in Remote-Controlled Demolition Robots.
The paper presents an approach that combines numerical and experimental techniques to evaluate the possibility of failure prevention of the structure of demolition robots. Based on a real example of the machine, the possibility of application and development of the author's method was presented. The main problem when designing this type of machine is the negligible knowledge of how dynamic loads act during operation and how many times they appear. Underestimating the loads and their cycles when designing these types of machines can cause them to become damaged quickly. The method presented in the article allows to solve the problem of determining the key parameters needed in the evaluation of this type of construction such as loads, but also allows to determine the number of load cycles, which is particularly important for fatigue. The result presented in the article is an authors’ method that allows determining the fatigue of the structure of a demolition machine by combining numerical and experimental techniques.
- Open Access
- 11 April 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (7) , 1500
Application of a Design and Construction Method Based on a Study of User Needs in the Prevention of Accidents Involving Operators of Demolition Robots
The paper presents a new method of design and construction aimed at developing a system that helps to prevent accidents involving demolition robot operators. The method is based on a study of user needs and was developed in accordance with Design Thinking methodology. This study provides a theoretical review of designing processes and methodologies, including conceptual design, and explores the implementation of the proposed method in the designing process for a Human–Machine Interface (HMI) accident prevention system. An in-depth study of user needs combined with an analysis of the operational system, both of which followed the stages in the proposed method, as well as with experimental tests on a small remote control demolition robot, inspired the development of an operator-controlled HMI system. The theoretical review concerns non-haptic feedback devices, which can be implemented in the demolition robot remote control or in operator safety equipment. Experimental research helped to determine the data necessary to develop an HMI system that continuously uses information from sensors installed on the machine. The paper also addresses issues related to the implementation of the HMI interface in order to avoid failures resulting from robot misuse and to protect the operator from any hazards caused by potential accidents. This paper emphasizes the importance of the connection between man and machine to overcome the lack of direct information flow in the case of mechanical operation.
- 11 April 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (7) , 1500
Open AccessApplication of a Design and Construction Method Based on a Study of User Needs in the Prevention of Accidents Involving Operators of Demolition Robots
The paper presents a new method of design and construction aimed at developing a system that helps to prevent accidents involving demolition robot operators. The method is based on a study of user needs and was developed in accordance with Design Thinking methodology. This study provides a theoretical review of designing processes and methodologies, including conceptual design, and explores the implementation of the proposed method in the designing process for a Human–Machine Interface (HMI) accident prevention system. An in-depth study of user needs combined with an analysis of the operational system, both of which followed the stages in the proposed method, as well as with experimental tests on a small remote control demolition robot, inspired the development of an operator-controlled HMI system. The theoretical review concerns non-haptic feedback devices, which can be implemented in the demolition robot remote control or in operator safety equipment. Experimental research helped to determine the data necessary to develop an HMI system that continuously uses information from sensors installed on the machine. The paper also addresses issues related to the implementation of the HMI interface in order to avoid failures resulting from robot misuse and to protect the operator from any hazards caused by potential accidents. This paper emphasizes the importance of the connection between man and machine to overcome the lack of direct information flow in the case of mechanical operation.
- 29 March 2017
- Published by Springer Nature
- p. 441-450
Analysis of the Use of Biogas as Fuel for Internal Combustion Engines
- 29 March 2017
- Published by Springer Nature
- p. 441-450
Analysis of the Use of Biogas as Fuel for Internal Combustion Engines
- 29 March 2017
- Published by Springer Nature
- p. 109-119
Study of the Causes of Boom Elements Cracking of Electric Demolition Machine with Use of Experimental and Numerical Methods
- 29 March 2017
- Published by Springer Nature
- p. 109-119
Study of the Causes of Boom Elements Cracking of Electric Demolition Machine with Use of Experimental and Numerical Methods
- 3 March 2016
- Published by Springer Nature
- p. 711-720
Proactive Failure Prevention by Human-Machine Interface in Remote-Controlled Demolition Robots
- 3 March 2016
- Published by Springer Nature
- p. 711-720
Proactive Failure Prevention by Human-Machine Interface in Remote-Controlled Demolition Robots
- 1 January 2015
- Published by Springer Nature
- p. 365-373
Conceptual Design of Means of Transport Harnessing Human Power
- 1 January 2015
- Published by Springer Nature
- p. 365-373
Conceptual Design of Means of Transport Harnessing Human Power