YKYeonsu Kim

Yeonsu Kim

*This is an algorithmically generated author record based on publicly available information.

Yeonsu Kim has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A one-dimensional finite-volume modeling for hydraulic response in structure-regulated rivers: the K-RIVER model

    by Hansol Kang, Yeonsu Kim, Youngteck Hur, Jisun Byun, Sungmin Chu, Hyunuk An

    In structure-regulated rivers, hydraulic responses may be governed not only by upstream discharge but also by structural operation and downstream boundary forcing. This study presents K-RIVER, a one-dimensional hydraulic model for analyzing hydraulic responses in such systems. K-RIVER combines a standard-step solver for steady-flow analysis and initialization with a conservative finite-volume solver for unsteady simulation. Gates, weirs, barrages, bridges, and pumping stations are represented as internal flux interfaces within the governing conservation laws. Model performance is evaluated using analytical benchmarks covering subcritical, transcritical, hydraulic-jump, mixed-flow, and wetting–drying conditions. Grid-refinement tests confirmed first-order behavior of the primary spatial formulation, improved accuracy with second-order water-surface reconstruction, and approximately first-order shoreline convergence under unsteady wetting and drying. K-RIVER is further applied to the Ara Waterway, a regulated tidal system in Korea. For the July 2013 event, simulated water levels showed good agreement with observations (R2 up to 0.88; Kling–Gupta efficiency up to 0.91) and reproduced gate-controlled stage fluctuations and flood-peak timing. The field application represents the combined effects of structural operation and downstream boundary forcing for the investigated event, while broader predictive performance requires evaluation under additional hydrologic and operational conditions.

  • Open Access

    Operation-explicit hydrologic–hydraulic modeling of a low-gradient barrage-regulated tidal river: The Nakdong River case

    by Hansol Kang, Yeonsu Kim, Youngteck Hur, Taewoo Kim, Hyunuk An

    Tidal rivers regulated by hydraulic structures exhibit operation-driven dynamics governed by the coupled interaction among upstream inflow, downstream tidal forcing, and gate control. In low-gradient tidal reaches, these processes frequently induce bidirectional flow and seawater intrusion, yet quantitatively validated reach-scale frameworks that explicitly incorporate structural operation remain limited.This study develops a reach-scale hydrologic–hydraulic modeling framework that integrates watershed inflow, tidal boundary conditions, and gate-specific operational records, and applies it to the lower Nakdong River in Korea as a representative barrage-regulated tidal system. Lateral inflows were estimated using a distributed rainfall–runoff model and evaluated through reach-scale water balance analysis.The model reproduced inland water levels under both river-dominated and tide-dominated conditions, with root mean square errors of 0.02–0.11 m across calibration and validation periods. Reverse-flow discharge associated with seawater intrusion was quantitatively captured in terms of timing, peak magnitude, and cumulative intrusion volume during active gate operation.The results establish a physically consistent hydraulic baseline for operation-driven tidal rivers and provide a transferable foundation for forecasting and management in comparable low-gradient, barrage-regulated estuarine systems.

  • Open Access

    Development and Evaluation of a Real-Time Flood Forecasting System Based on the K-series Integrated Modeling Framework in the Seomjin River Basin

    by Jonghyun Park, Yeonsu Kim, Hyunuk An, Young-Taek Hur, Wansik Yu, Somang Lim

    This study evaluates the applicability of a real-time flood forecasting system developed using K-water’s K-series integrated modeling framework, which couples rainfall-runoff simulation, reservoir operation, river hydraulics, and flood inundation analysis. The system was applied to the extreme flood event that occurred in the Seomjin River Basin, South Korea, in August 2020. Catchment runoff was generated using K-DRUM (K-water Distributed Rainfall Runoff Model), reservoir operations were simulated using K-Oper, and river water levels were computed using K-River. The resulting hydraulic outputs were then processed in K-FIM (K-water Flood Inundation Map) to estimate the extent and depth of the flood inundation. Model performance showed high accuracy, with K-DRUM achieving Nash-Sutcliffe efficiency (NSE) values greater than 0.93 for inflow simulations, and K-River yielding NSE values of 0.82-0.93 for water level predictions. The inundation results from K-FIM also reproduced observed flood traces with reproduction rates of 0.73-0.85. These findings indicate that the K-series integrated modeling framework enables quantitative flood-risk assessment and can support early detection and real-time decision-making during flood events in complex hydrologic systems.

  • Open Access

    Estimation of river discharge using Monte Carlo simulations and a 1D hydraulic model based on the artificial multi-segmented rating curves at the confluence of two rivers

    by Hansol Kang, Yeonsu Kim, Hyunuk An, Jisun Byun, Joonwoo Noh

    During extreme floods caused by climate change, reliable flow discharge data are essential for successful reservoir operation to mitigate downstream flood damage. Generally, the flow discharge is computed using the rating curve (RC) established from the relationship between the flow rate and water stage level. Determining the parameters of rating curves is subject to uncertainties related to the difficulties and limitations of flow monitoring in covering a wide range of flow variations. Especially at river confluences, the uncertainties are pronounced when floods occur owing to several factors such as roughness change, backwaters, and levee overflow. The Seomjin River Basin in Korea suffered from flood inundation that occurred at the tributary confluence during an extreme flood in 2020. To identify a reliable flow rate of the main stream and tributary, this study proposes an indirect flow assessment scheme using a 1D hydrodynamic simulation model to find the best simulated water level in an iterative manner based on Monte Carlo (MC) simulations. With a large amount of discharge data generated from random-number combinations, it is possible to obtain the best results automatically by specifying the reliability limitation considering the uncertainty of the predetermined RC parameters associated with the roughness coefficient. Nash Sutcliffe Efficiency (NSE) was incorporated to evaluate the reproduced water level to meet the threshold specified for NSE ≥ 0.75. The simulated flowrates computed from the revised RC and roughness coefficients revealed an error range of 8%–36.6% compared with the design flood. The approach proposed in this study is applicable for determining the valid parameters necessary to create a revised RC at an existing water level gauge station, where the uncertainties of the RC are pronounced, particularly in the vicinity of the channel confluence.


  • Open Access

    Application of Stage-Fall-Discharge Rating Curves to a Reservoir Based on Acoustic Doppler Velocity Meter Measurement Data

    by Yeonsu Kim, Sungryul Oh, Seungsoo Lee, Jisun Byun, Hyunuk An

    The applicability of the stage-fall-discharge (SFD) method in combination with acoustic Doppler velocity meter (ADVM) data, upstream of a hydraulic structure, specifically, the Sejong-weir located in the Geum River, Korea, was examined. We developed three rating curves: a conventional simple rating curve with the data measured using an acoustic Doppler current profiler (ADCP) and floating objects, an SFD rating curve with the data measured using the ADCP and floating objects, and an SFD rating curve with the data measured using an ADVM. Because of the gate operation effect, every rating curve involved many uncertainties under 1000 m3/s (3.13 m2/s, specific discharge). In terms of the hydrograph reconstruction, compared with the conventional simple rating curve, the SFD developed using ADVM data exhibited a higher agreement with the measured data in terms of the pattern. Furthermore, the measured discharge over 1000 m3/s primarily ranged between 97.5% and 2.5% in the graph comparing the ratio of the median and observed discharge. Based on this experiment, it is confirmed that the SFD rating curve with data to represent the backwater effect, such as ADVM data, can reduce the uncertainties induced by the typical rating curve


  • Open Access

    Case Study of HEC-RAS 1D–2D Coupling Simulation: 2002 Baeksan Flood Event in Korea

    by Lea Dasallas, Yeonsu Kim, Hyunuk An

    Recent studies strongly suggest the possibility of more frequent extreme events as a result of the changing climate. These weather extremes, such as excessive rainfall, result in debris flow, river overflow and urban flooding, which can pose a substantial threat to the community. An effective flood model is therefore a crucial tool in flood disaster control and mitigation. A number of flood models have been established in recent years. However, the major challenge in developing effective and accurate flood models is the disadvantage of running multiple models for separate, individual conditions. Among the solutions in recent research is the development of combined 1D–2D flood modeling. Coupled 1D–2D flood modeling allows the channel flows to be represented in 1D and the overbank flow to be modeled in 2D. In order to test the efficiency of the approach, this research aims to assess the capability of the U.S. Army Corps of Engineers Hydrologic Engineering Center River Analysis System (HEC-RAS) model’s implementation of the combined 1D–2D hydraulic computation in simulating river overflow inundation. For verification, the simulation is applied to the Baeksan river levee breach event in South Korea in 2011. The simulation results show similarities of the observed data and the outputs from widely used flood models. This proves the applicability of the HEC-RAS 1D–2D coupling method as a powerful tool in simulating accurate inundations for flood events.


  • Open Access

    Hybrid Numerical Scheme of Preissmann Slot Model for Transient Mixed Flows

    by Hyunuk An, Seungsoo Lee, Seong Jin Noh, Yeonsu Kim, Jaekyoung Noh

    The Preissmann slot model is one of the most widely used models to conceptualize both free-surface and pressurized flows in urban drainage systems. Despite its simplicity and wide range of applications, numerical solutions of the Preissmann slot model suffer from the spurious oscillations, especially when flow conditions switch from free-surface flow to pressurized flow. To overcome this problem, a new hybrid numerical flux solver of the Preissmann slot model is proposed herein, in which the upwind flux solver is combined with the centered flux solver. Numerical experiments are conducted for multiple flow conditions such as typical filling, pipe-filling, and transition-flow conditions. The numerical results indicate that the proposed scheme generally outperforms the conventional flux schemes for various hydraulic conditions and wave velocities. The proposed scheme should be useful to further enhance integrated urban water modeling in which transient mixed flow conditions significantly impact the simulation accuracy during extreme floods.