Hansol Kang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hansol Kang has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Hyunuk An
Department of Agricultural and Rural Engineering, Chungnam National University, Daejeon 34134, Korea
4 shared publications - Yeonsu Kim
K-Water Research Institute, Daejeon 34045, Korea
3 shared publications - Tae-Woo Kim
Hydro Technology Institute Co. Ltd Busan Korea 딥러닝
2 shared publications Youngteck Hur
2 shared publicationsHeemin Ko
1 shared publicationHyunuk An
1 shared publication
Latest Publications
- Open Access
- 16 November 2026
- Published by IWA Publishing in Journal of Hydroinformatics
A one-dimensional finite-volume modeling for hydraulic response in structure-regulated rivers: the K-RIVER model
In structure-regulated rivers, hydraulic responses may be governed not only by upstream discharge but also by structural operation and downstream boundary forcing. This study presents K-RIVER, a one-dimensional hydraulic model for analyzing hydraulic responses in such systems. K-RIVER combines a standard-step solver for steady-flow analysis and initialization with a conservative finite-volume solver for unsteady simulation. Gates, weirs, barrages, bridges, and pumping stations are represented as internal flux interfaces within the governing conservation laws. Model performance is evaluated using analytical benchmarks covering subcritical, transcritical, hydraulic-jump, mixed-flow, and wetting–drying conditions. Grid-refinement tests confirmed first-order behavior of the primary spatial formulation, improved accuracy with second-order water-surface reconstruction, and approximately first-order shoreline convergence under unsteady wetting and drying. K-RIVER is further applied to the Ara Waterway, a regulated tidal system in Korea. For the July 2013 event, simulated water levels showed good agreement with observations (R2 up to 0.88; Kling–Gupta efficiency up to 0.91) and reproduced gate-controlled stage fluctuations and flood-peak timing. The field application represents the combined effects of structural operation and downstream boundary forcing for the investigated event, while broader predictive performance requires evaluation under additional hydrologic and operational conditions.
- 16 November 2026
- Published by IWA Publishing in Journal of Hydroinformatics
Open AccessA one-dimensional finite-volume modeling for hydraulic response in structure-regulated rivers: the K-RIVER model
In structure-regulated rivers, hydraulic responses may be governed not only by upstream discharge but also by structural operation and downstream boundary forcing. This study presents K-RIVER, a one-dimensional hydraulic model for analyzing hydraulic responses in such systems. K-RIVER combines a standard-step solver for steady-flow analysis and initialization with a conservative finite-volume solver for unsteady simulation. Gates, weirs, barrages, bridges, and pumping stations are represented as internal flux interfaces within the governing conservation laws. Model performance is evaluated using analytical benchmarks covering subcritical, transcritical, hydraulic-jump, mixed-flow, and wetting–drying conditions. Grid-refinement tests confirmed first-order behavior of the primary spatial formulation, improved accuracy with second-order water-surface reconstruction, and approximately first-order shoreline convergence under unsteady wetting and drying. K-RIVER is further applied to the Ara Waterway, a regulated tidal system in Korea. For the July 2013 event, simulated water levels showed good agreement with observations (R2 up to 0.88; Kling–Gupta efficiency up to 0.91) and reproduced gate-controlled stage fluctuations and flood-peak timing. The field application represents the combined effects of structural operation and downstream boundary forcing for the investigated event, while broader predictive performance requires evaluation under additional hydrologic and operational conditions.
- Open Access
- 5 June 2026
- Published by Elsevier in SSRN Electronic Journal
Operation-explicit hydrologic–hydraulic modeling of a low-gradient barrage-regulated tidal river: The Nakdong River case
Tidal rivers regulated by hydraulic structures exhibit operation-driven dynamics governed by the coupled interaction among upstream inflow, downstream tidal forcing, and gate control. In low-gradient tidal reaches, these processes frequently induce bidirectional flow and seawater intrusion, yet quantitatively validated reach-scale frameworks that explicitly incorporate structural operation remain limited.This study develops a reach-scale hydrologic–hydraulic modeling framework that integrates watershed inflow, tidal boundary conditions, and gate-specific operational records, and applies it to the lower Nakdong River in Korea as a representative barrage-regulated tidal system. Lateral inflows were estimated using a distributed rainfall–runoff model and evaluated through reach-scale water balance analysis.The model reproduced inland water levels under both river-dominated and tide-dominated conditions, with root mean square errors of 0.02–0.11 m across calibration and validation periods. Reverse-flow discharge associated with seawater intrusion was quantitatively captured in terms of timing, peak magnitude, and cumulative intrusion volume during active gate operation.The results establish a physically consistent hydraulic baseline for operation-driven tidal rivers and provide a transferable foundation for forecasting and management in comparable low-gradient, barrage-regulated estuarine systems.
- 5 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessOperation-explicit hydrologic–hydraulic modeling of a low-gradient barrage-regulated tidal river: The Nakdong River case
Tidal rivers regulated by hydraulic structures exhibit operation-driven dynamics governed by the coupled interaction among upstream inflow, downstream tidal forcing, and gate control. In low-gradient tidal reaches, these processes frequently induce bidirectional flow and seawater intrusion, yet quantitatively validated reach-scale frameworks that explicitly incorporate structural operation remain limited.This study develops a reach-scale hydrologic–hydraulic modeling framework that integrates watershed inflow, tidal boundary conditions, and gate-specific operational records, and applies it to the lower Nakdong River in Korea as a representative barrage-regulated tidal system. Lateral inflows were estimated using a distributed rainfall–runoff model and evaluated through reach-scale water balance analysis.The model reproduced inland water levels under both river-dominated and tide-dominated conditions, with root mean square errors of 0.02–0.11 m across calibration and validation periods. Reverse-flow discharge associated with seawater intrusion was quantitatively captured in terms of timing, peak magnitude, and cumulative intrusion volume during active gate operation.The results establish a physically consistent hydraulic baseline for operation-driven tidal rivers and provide a transferable foundation for forecasting and management in comparable low-gradient, barrage-regulated estuarine systems.
- Open Access
- 30 May 2026
- Published by Elsevier in SSRN Electronic Journal
Experiment-informed modeling of concentration-dependent rheological transition in rainfall-runoff-driven debris flows
Event-scale modeling of rainfall-induced debris flows requires an explicit representation of rainfall intensity and runoff generation, which strongly influence flow mobility and rheological behavior; however, these processes are commonly simplified or neglected through the use of fixed rheological assumptions. In this study, we developed an experiment-informed, concentration-dependent debris-flow model that explicitly couples rainfall infiltration, runoff generation, erosion, entrainment, deposition, and runoff-induced dilution within a 2D depth-averaged framework. Rheometric tests on source material from the 2011 Mt. Umyeon debris-flow disaster showed that the Bingham yield stress and plastic viscosity increased nonlinearly with volumetric solid concentration. These experimentally derived constitutive relations were embedded directly into the numerical model so that rheology was updated dynamically at each grid cell and time step. Application to the 2011 Mt. Umyeon event reproduced the observed debris-flow footprint with high classification skill (AUC = 0.873; TPR = 0.776; FPR = 0.056) and captured severe site-scale impacts in the urban area. A comparison with constant-rheology end-member cases showed that a persistently high-resistance rheology underestimated damage, whereas a persistently fluidized rheology overestimated local impact intensity. The results demonstrate that a concentration-dependent rheological transition is essential for realistic event-scale prediction and that coupling rainfall–runoff dynamics with debris-flow routing provides a physically grounded, calibration-light basis for assessing compound hydro–geomorphic hazards.
- 30 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessExperiment-informed modeling of concentration-dependent rheological transition in rainfall-runoff-driven debris flows
Event-scale modeling of rainfall-induced debris flows requires an explicit representation of rainfall intensity and runoff generation, which strongly influence flow mobility and rheological behavior; however, these processes are commonly simplified or neglected through the use of fixed rheological assumptions. In this study, we developed an experiment-informed, concentration-dependent debris-flow model that explicitly couples rainfall infiltration, runoff generation, erosion, entrainment, deposition, and runoff-induced dilution within a 2D depth-averaged framework. Rheometric tests on source material from the 2011 Mt. Umyeon debris-flow disaster showed that the Bingham yield stress and plastic viscosity increased nonlinearly with volumetric solid concentration. These experimentally derived constitutive relations were embedded directly into the numerical model so that rheology was updated dynamically at each grid cell and time step. Application to the 2011 Mt. Umyeon event reproduced the observed debris-flow footprint with high classification skill (AUC = 0.873; TPR = 0.776; FPR = 0.056) and captured severe site-scale impacts in the urban area. A comparison with constant-rheology end-member cases showed that a persistently high-resistance rheology underestimated damage, whereas a persistently fluidized rheology overestimated local impact intensity. The results demonstrate that a concentration-dependent rheological transition is essential for realistic event-scale prediction and that coupling rainfall–runoff dynamics with debris-flow routing provides a physically grounded, calibration-light basis for assessing compound hydro–geomorphic hazards.
- Open Access
- 26 February 2026
- Published by Elsevier in SSRN Electronic Journal
Operation-explicit hydrologic–hydraulic modeling of a low-gradient barrage-regulated tidal river: The Nakdong River case
Estuarine barrages are traditionally operated to prevent salt intrusion and mitigate flooding. In certain cases, controlled seawater inflow has been introduced to support ecological restoration, creating operation-driven tidal systems in which stage–discharge relationships depart from conventional river behavior. In these systems, upstream inflow variability, tidal forcing, and gate-controlled overflow and underflow processes interact nonlinearly, making reverse-discharge estimation highly sensitive to small water-level differences across the structure. However, reach-scale hydrologic–hydraulic frameworks that explicitly represent gate operation and quantitatively validate reverse-flow dynamics under real operating conditions remain limited. This study develops a gate-explicit hydrologic–hydraulic modeling framework for the lower Nakdong River (Korea), where controlled seawater inflow is implemented to form a brackish estuarine zone. Distributed watershed inflows are coupled to a one-dimensional unsteady hydraulic model, and barrage discharge is represented using overflow and underflow formulations with empirically derived coefficients based on ADCP measurements. The model reproduces inland water levels under both river- and tide-dominated conditions with RMSE values of 0.02–0.11 m across calibration and independent validation periods. Reverse-flow discharge is captured in terms of timing, peak magnitude, and cumulative intrusion volume during active gate operation. These results demonstrate that explicit hydraulic representation of gate-controlled discharge is essential for quantitatively resolving bidirectional flow in regulated tidal rivers.
- 26 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessOperation-explicit hydrologic–hydraulic modeling of a low-gradient barrage-regulated tidal river: The Nakdong River case
Estuarine barrages are traditionally operated to prevent salt intrusion and mitigate flooding. In certain cases, controlled seawater inflow has been introduced to support ecological restoration, creating operation-driven tidal systems in which stage–discharge relationships depart from conventional river behavior. In these systems, upstream inflow variability, tidal forcing, and gate-controlled overflow and underflow processes interact nonlinearly, making reverse-discharge estimation highly sensitive to small water-level differences across the structure. However, reach-scale hydrologic–hydraulic frameworks that explicitly represent gate operation and quantitatively validate reverse-flow dynamics under real operating conditions remain limited. This study develops a gate-explicit hydrologic–hydraulic modeling framework for the lower Nakdong River (Korea), where controlled seawater inflow is implemented to form a brackish estuarine zone. Distributed watershed inflows are coupled to a one-dimensional unsteady hydraulic model, and barrage discharge is represented using overflow and underflow formulations with empirically derived coefficients based on ADCP measurements. The model reproduces inland water levels under both river- and tide-dominated conditions with RMSE values of 0.02–0.11 m across calibration and independent validation periods. Reverse-flow discharge is captured in terms of timing, peak magnitude, and cumulative intrusion volume during active gate operation. These results demonstrate that explicit hydraulic representation of gate-controlled discharge is essential for quantitatively resolving bidirectional flow in regulated tidal rivers.
- Open Access
- 1 February 2024
- Published by IOP Publishing in Environmental Research Communications
- Vol. 6 (2) , 025012
Estimation of river discharge using Monte Carlo simulations and a 1D hydraulic model based on the artificial multi-segmented rating curves at the confluence of two rivers
During extreme floods caused by climate change, reliable flow discharge data are essential for successful reservoir operation to mitigate downstream flood damage. Generally, the flow discharge is computed using the rating curve (RC) established from the relationship between the flow rate and water stage level. Determining the parameters of rating curves is subject to uncertainties related to the difficulties and limitations of flow monitoring in covering a wide range of flow variations. Especially at river confluences, the uncertainties are pronounced when floods occur owing to several factors such as roughness change, backwaters, and levee overflow. The Seomjin River Basin in Korea suffered from flood inundation that occurred at the tributary confluence during an extreme flood in 2020. To identify a reliable flow rate of the main stream and tributary, this study proposes an indirect flow assessment scheme using a 1D hydrodynamic simulation model to find the best simulated water level in an iterative manner based on Monte Carlo (MC) simulations. With a large amount of discharge data generated from random-number combinations, it is possible to obtain the best results automatically by specifying the reliability limitation considering the uncertainty of the predetermined RC parameters associated with the roughness coefficient. Nash Sutcliffe Efficiency (NSE) was incorporated to evaluate the reproduced water level to meet the threshold specified for NSE ≥ 0.75. The simulated flowrates computed from the revised RC and roughness coefficients revealed an error range of 8%–36.6% compared with the design flood. The approach proposed in this study is applicable for determining the valid parameters necessary to create a revised RC at an existing water level gauge station, where the uncertainties of the RC are pronounced, particularly in the vicinity of the channel confluence.
- 1 February 2024
- Published by IOP Publishing in Environmental Research Communications
- Vol. 6 (2) , 025012
Open AccessEstimation of river discharge using Monte Carlo simulations and a 1D hydraulic model based on the artificial multi-segmented rating curves at the confluence of two rivers
During extreme floods caused by climate change, reliable flow discharge data are essential for successful reservoir operation to mitigate downstream flood damage. Generally, the flow discharge is computed using the rating curve (RC) established from the relationship between the flow rate and water stage level. Determining the parameters of rating curves is subject to uncertainties related to the difficulties and limitations of flow monitoring in covering a wide range of flow variations. Especially at river confluences, the uncertainties are pronounced when floods occur owing to several factors such as roughness change, backwaters, and levee overflow. The Seomjin River Basin in Korea suffered from flood inundation that occurred at the tributary confluence during an extreme flood in 2020. To identify a reliable flow rate of the main stream and tributary, this study proposes an indirect flow assessment scheme using a 1D hydrodynamic simulation model to find the best simulated water level in an iterative manner based on Monte Carlo (MC) simulations. With a large amount of discharge data generated from random-number combinations, it is possible to obtain the best results automatically by specifying the reliability limitation considering the uncertainty of the predetermined RC parameters associated with the roughness coefficient. Nash Sutcliffe Efficiency (NSE) was incorporated to evaluate the reproduced water level to meet the threshold specified for NSE ≥ 0.75. The simulated flowrates computed from the revised RC and roughness coefficients revealed an error range of 8%–36.6% compared with the design flood. The approach proposed in this study is applicable for determining the valid parameters necessary to create a revised RC at an existing water level gauge station, where the uncertainties of the RC are pronounced, particularly in the vicinity of the channel confluence.