Rajesh Gupta
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rajesh Gupta has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Vishal E. Puranik
Department of Energy Science and Engineering, Indian Institute of Technology Bombay, Mumbai, India
10 shared publications - Ravi Kumar
Department of Energy Science and Engineering, Indian Institute of Technology Bombay, Mumbai, India
9 shared publications - Dhiraj Magare
Department of Electronics Communication Engineering, Ramrao Adik Institute of Technology, Navi Mumbai, Maharashtra, India
4 shared publications - Humaid Mohammed
Indian Inst Technol, Dept Energy Sci & Engn, Mumbai, Maharashtra, India
4 shared publications - Manish Kumar
Department of Electronics and Communication Engineering, University Institute of Technology, Himachal Pradesh University, Shimla, India
4 shared publications - Archana Sinha
SLAC National Accelerator Laboratory, Menlo Park, CA, USA
3 shared publications
Latest Publications
- 16 October 2026
- Published by Elsevier in Renewable Energy
- Vol. 278
Investigation of leakage current paths in PV module under different climatic conditions
- 16 October 2026
- Published by Elsevier in Renewable Energy
- Vol. 278
Investigation of leakage current paths in PV module under different climatic conditions
- 1 September 2025
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 17 (5)
Review, challenges, and scope of advancements in outdoor quantitative electroluminescence imaging for solar PV
Qualitative electroluminescence (EL) imaging is a prominent tool for inspecting defective photovoltaic (PV) modules in outdoor installations. While the qualitative approach has proven valuable, the developing field of quantitative EL imaging offers significant advantages by enabling a deeper evaluation of module performance from EL images. Most research on quantitative EL imaging has been conducted under controlled indoor conditions, and the literature lacks an in-depth discussion on its adaptation for outdoor PV installations. This article aims to bridge that gap by reviewing various quantitative EL approaches and examining the challenges associated with their application in PV installations. Progress in EL imaging technology is presented across key implementation aspects. Major focus is given on quantitative EL approaches, such as parametric extraction, machine learning, empirical methods, and multi-characterization techniques. A comparative assessment of these approaches is conducted, emphasizing their requirements for outdoor EL inspections, including minimum EL data acquisition needs, ease of outdoor implementation, and the capability to extract cell-level or module-level quantitative information. Based on this assessment, the applicability and potential challenges of each approach are analyzed for different PV installations, along with strategies for overcoming these challenges. Furthermore, the scope of advancements in EL data acquisition, EL software, and EL standards is outlined.
- 1 September 2025
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 17 (5)
Review, challenges, and scope of advancements in outdoor quantitative electroluminescence imaging for solar PV
Qualitative electroluminescence (EL) imaging is a prominent tool for inspecting defective photovoltaic (PV) modules in outdoor installations. While the qualitative approach has proven valuable, the developing field of quantitative EL imaging offers significant advantages by enabling a deeper evaluation of module performance from EL images. Most research on quantitative EL imaging has been conducted under controlled indoor conditions, and the literature lacks an in-depth discussion on its adaptation for outdoor PV installations. This article aims to bridge that gap by reviewing various quantitative EL approaches and examining the challenges associated with their application in PV installations. Progress in EL imaging technology is presented across key implementation aspects. Major focus is given on quantitative EL approaches, such as parametric extraction, machine learning, empirical methods, and multi-characterization techniques. A comparative assessment of these approaches is conducted, emphasizing their requirements for outdoor EL inspections, including minimum EL data acquisition needs, ease of outdoor implementation, and the capability to extract cell-level or module-level quantitative information. Based on this assessment, the applicability and potential challenges of each approach are analyzed for different PV installations, along with strategies for overcoming these challenges. Furthermore, the scope of advancements in EL data acquisition, EL software, and EL standards is outlined.
- 9 May 2025
- Published by Elsevier in Renewable Energy
- Vol. 251
A comprehensive review on future research trends in solar cell parameter extraction techniques
- 9 May 2025
- Published by Elsevier in Renewable Energy
- Vol. 251
A comprehensive review on future research trends in solar cell parameter extraction techniques
- 1 July 2024
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 16 (4)
Impact of partial shading on the performance and reliability of potential-induced degraded crystalline silicon PV module
Potential-induced degradation shunting (PID-s) is a severe degradation mechanism that significantly impacts the performance and lifespan of photovoltaic (PV) modules. The impact of PID-s is further intensified when it coincides with partial shading. Despite its significance, limited research has been focused on the combined impact of PID-s and partial shading. Therefore, this work analyzes the impact of partial shading on the performance and reliability of PID-s-affected PV module. In the literature, PID-s is reported with two natures: Ohmic and non-Ohmic. This work considers the nature and severity of PID-s in the presented investigation. Results indicate that when an Ohmic PID-s-affected PV cell is shaded in a module, it results in less power loss than when a healthy cell is shaded, but it induces a significantly high reverse current through the PID-s-affected cell. With severity, the impact of Ohmic PID-s under shading decreases. In the case of non-Ohmic PID-s, severity does not impact the performance significantly; however, shading of a non-Ohmic PID-s affected cell is more severe than Ohmic PID-s until the PID-s threshold is reached. Furthermore, bypass diode activation is delayed in both types of PID-s compared to shading on healthy cells. Overall, these findings emphasize the significance of optimizing shading strategies and mitigating PID-s effects to enhance the performance and reliability of photovoltaics. This research provides valuable insights for industry stakeholders involved in PV installation and maintenance operations.
- 1 July 2024
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 16 (4)
Impact of partial shading on the performance and reliability of potential-induced degraded crystalline silicon PV module
Potential-induced degradation shunting (PID-s) is a severe degradation mechanism that significantly impacts the performance and lifespan of photovoltaic (PV) modules. The impact of PID-s is further intensified when it coincides with partial shading. Despite its significance, limited research has been focused on the combined impact of PID-s and partial shading. Therefore, this work analyzes the impact of partial shading on the performance and reliability of PID-s-affected PV module. In the literature, PID-s is reported with two natures: Ohmic and non-Ohmic. This work considers the nature and severity of PID-s in the presented investigation. Results indicate that when an Ohmic PID-s-affected PV cell is shaded in a module, it results in less power loss than when a healthy cell is shaded, but it induces a significantly high reverse current through the PID-s-affected cell. With severity, the impact of Ohmic PID-s under shading decreases. In the case of non-Ohmic PID-s, severity does not impact the performance significantly; however, shading of a non-Ohmic PID-s affected cell is more severe than Ohmic PID-s until the PID-s threshold is reached. Furthermore, bypass diode activation is delayed in both types of PID-s compared to shading on healthy cells. Overall, these findings emphasize the significance of optimizing shading strategies and mitigating PID-s effects to enhance the performance and reliability of photovoltaics. This research provides valuable insights for industry stakeholders involved in PV installation and maintenance operations.
- 14 May 2024
- Published by Elsevier in Solar Energy
- Vol. 275
Analysis and insights into snail trail degradation in photovoltaic modules
- 14 May 2024
- Published by Elsevier in Solar Energy
- Vol. 275
Analysis and insights into snail trail degradation in photovoltaic modules
- Open Access
- 22 February 2024
- Published by TIB Open Publishing in SiliconPV Conference Proceedings
- Vol. 1
Unveiling the Potential of Electroluminescence Characteristics in Investigating Different Types of Defects and Degradations in c-Si PV Module
Photovoltaic (PV) cells can be characterized using current-voltage (I-V) as well as electroluminescence (EL) characteristics. However, unlike I-V, the potential of EL characteristics has not been well discussed in the literature. In this work, the impact of different types of defects on the EL characteristics is studied, and the possible use of EL characteristics in the qualitative and quantitative investigation of defects is unveiled. Defective field-aged and new modules with artificially induced defects were taken for experimental study. EL current-intensity (I-ɸ) and EL voltage-intensity (V-ɸ) characteristics were studied for the cells suffering from major defects such as cracks, busbar interconnect failure, and PID-shunting. It is observed that I-ɸ characteristic is useful in the investigation of shunting defects, whereas V-ɸ characteristic is in diagnosing defect that increases series resistance. Bulk defects within a cell affect EL calibration constants and increase cell-to-cell mismatch within a module. The findings of this work would be useful for extracting valuable information from EL images regarding defects and degradations.
- 22 February 2024
- Published by TIB Open Publishing in SiliconPV Conference Proceedings
- Vol. 1
Open AccessUnveiling the Potential of Electroluminescence Characteristics in Investigating Different Types of Defects and Degradations in c-Si PV Module
Photovoltaic (PV) cells can be characterized using current-voltage (I-V) as well as electroluminescence (EL) characteristics. However, unlike I-V, the potential of EL characteristics has not been well discussed in the literature. In this work, the impact of different types of defects on the EL characteristics is studied, and the possible use of EL characteristics in the qualitative and quantitative investigation of defects is unveiled. Defective field-aged and new modules with artificially induced defects were taken for experimental study. EL current-intensity (I-ɸ) and EL voltage-intensity (V-ɸ) characteristics were studied for the cells suffering from major defects such as cracks, busbar interconnect failure, and PID-shunting. It is observed that I-ɸ characteristic is useful in the investigation of shunting defects, whereas V-ɸ characteristic is in diagnosing defect that increases series resistance. Bulk defects within a cell affect EL calibration constants and increase cell-to-cell mismatch within a module. The findings of this work would be useful for extracting valuable information from EL images regarding defects and degradations.
- Open Access
- 22 February 2024
- Published by TIB Open Publishing in SiliconPV Conference Proceedings
- Vol. 1
Investigation of Degradation in 20-Year-Field-Exposed PV Modules From India by Cross-Characterization Using Electroluminescence Imaging and Thermography
The reliability of photovoltaic (PV) modules is essential for ensuring a smooth operation over the anticipated timespan while operating outside. Examining the degradation in field-exposed photovoltaic (FEPV) modules will help to identify the possible degradation modes that can affect PV module performance and functioning. In this paper, to identify the major modes of degradation in Indian subtropical climate conditions, 20-year-old FEPV modules have been investigated by cross-characterization using dark lock-in thermography (DLIT) and electroluminescence (EL) imaging. Cross-characterization using EL and DLIT images has been helpful in investigation of various modes of degradations in FEPV modules in the presence of multiple degradations. Encapsulant and busbar ribbon interface degradations have been identified as the two main modes of degradation observed in Indian sub-tropical climate conditions. Minor degradations include finger interruptions and cell cracks. A major effect of degradation has been observed on the fill factor and short circuit current, which have decreased by up to 30% and 40%, respectively. The results presented in this paper can be used to understand degradation occurring in a sub-tropical climate and for the non-destructive analysis of degradations in the FEPV modules.
- 22 February 2024
- Published by TIB Open Publishing in SiliconPV Conference Proceedings
- Vol. 1
Open AccessInvestigation of Degradation in 20-Year-Field-Exposed PV Modules From India by Cross-Characterization Using Electroluminescence Imaging and Thermography
The reliability of photovoltaic (PV) modules is essential for ensuring a smooth operation over the anticipated timespan while operating outside. Examining the degradation in field-exposed photovoltaic (FEPV) modules will help to identify the possible degradation modes that can affect PV module performance and functioning. In this paper, to identify the major modes of degradation in Indian subtropical climate conditions, 20-year-old FEPV modules have been investigated by cross-characterization using dark lock-in thermography (DLIT) and electroluminescence (EL) imaging. Cross-characterization using EL and DLIT images has been helpful in investigation of various modes of degradations in FEPV modules in the presence of multiple degradations. Encapsulant and busbar ribbon interface degradations have been identified as the two main modes of degradation observed in Indian sub-tropical climate conditions. Minor degradations include finger interruptions and cell cracks. A major effect of degradation has been observed on the fill factor and short circuit current, which have decreased by up to 30% and 40%, respectively. The results presented in this paper can be used to understand degradation occurring in a sub-tropical climate and for the non-destructive analysis of degradations in the FEPV modules.
- 30 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 14 (2) , 296-304
Application of Electroluminescence Imaging to Distinguish Ohmic and Non Ohmic Shunting in Inaccessible Cells Within a PV Module
Photovoltaic (PV) technology is susceptible to various defects and degradations. One such defect is shunts, which result in internal leakage paths, reducing cell performance and efficiency. Shunts can be categorised as either ohmic or non-ohmic based on the nature of sinking current with voltage. Understanding the nature of shunting is crucial for comprehending the physical phenomena occurring at shunted sites. However, current methods such as dark lock-in thermography and current-voltage ( I–V) characteristics have limitations in nondestructive characterisation of cells within an intact PV module, which require individual cell access. This article presents a novel application of electroluminescence (EL) imaging to distinguish between ohmic and non-ohmic shunting in cells within a module nondestructively. The method involves a two-step process using three EL images at different currents. Firstly, shunted and nonshunted cells are differentiated based on low current EL image. In the second step, ohmic and non-ohmic shunted cells are distinguished using Shunt-Index value based on current-EL intensity characteristics. Non-ohmic shunted cells show a linear behaviour on a log-log scaled current-EL intensity characteristics, while ohmic shunted cells exhibit a linear behaviour. Experimental validation demonstrates the successful identification of shunted cells and their nature, providing valuable insights for shunt-related PV cell analysis.
- 30 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 14 (2) , 296-304
Application of Electroluminescence Imaging to Distinguish Ohmic and Non Ohmic Shunting in Inaccessible Cells Within a PV Module
Photovoltaic (PV) technology is susceptible to various defects and degradations. One such defect is shunts, which result in internal leakage paths, reducing cell performance and efficiency. Shunts can be categorised as either ohmic or non-ohmic based on the nature of sinking current with voltage. Understanding the nature of shunting is crucial for comprehending the physical phenomena occurring at shunted sites. However, current methods such as dark lock-in thermography and current-voltage ( I–V) characteristics have limitations in nondestructive characterisation of cells within an intact PV module, which require individual cell access. This article presents a novel application of electroluminescence (EL) imaging to distinguish between ohmic and non-ohmic shunting in cells within a module nondestructively. The method involves a two-step process using three EL images at different currents. Firstly, shunted and nonshunted cells are differentiated based on low current EL image. In the second step, ohmic and non-ohmic shunted cells are distinguished using Shunt-Index value based on current-EL intensity characteristics. Non-ohmic shunted cells show a linear behaviour on a log-log scaled current-EL intensity characteristics, while ohmic shunted cells exhibit a linear behaviour. Experimental validation demonstrates the successful identification of shunted cells and their nature, providing valuable insights for shunt-related PV cell analysis.
- Open Access
- 7 January 2024
- Published by Elsevier in Solar Energy Advances
- Vol. 4
Categorizing Indian states based on operating condition of photovoltaic system
- 7 January 2024
- Published by Elsevier in Solar Energy Advances
- Vol. 4
Open AccessCategorizing Indian states based on operating condition of photovoltaic system