Vishal E. Puranik
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Vishal E. Puranik has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Rajesh Gupta
Indian Institute of Technology Bombay
10 shared publications - Ravi Kumar
Department of Energy Science and Engineering, Indian Institute of Technology Bombay, Mumbai, India
8 shared publications - Asokan S
Department of Energy Science and Engineering, Indian Institute of Technology Bombay , Mumbai 400076, India
1 shared publication
Latest Publications
- 1 September 2025
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 17 (5)
Review, challenges, and scope of advancements in outdoor quantitative electroluminescence imaging for solar PV
Qualitative electroluminescence (EL) imaging is a prominent tool for inspecting defective photovoltaic (PV) modules in outdoor installations. While the qualitative approach has proven valuable, the developing field of quantitative EL imaging offers significant advantages by enabling a deeper evaluation of module performance from EL images. Most research on quantitative EL imaging has been conducted under controlled indoor conditions, and the literature lacks an in-depth discussion on its adaptation for outdoor PV installations. This article aims to bridge that gap by reviewing various quantitative EL approaches and examining the challenges associated with their application in PV installations. Progress in EL imaging technology is presented across key implementation aspects. Major focus is given on quantitative EL approaches, such as parametric extraction, machine learning, empirical methods, and multi-characterization techniques. A comparative assessment of these approaches is conducted, emphasizing their requirements for outdoor EL inspections, including minimum EL data acquisition needs, ease of outdoor implementation, and the capability to extract cell-level or module-level quantitative information. Based on this assessment, the applicability and potential challenges of each approach are analyzed for different PV installations, along with strategies for overcoming these challenges. Furthermore, the scope of advancements in EL data acquisition, EL software, and EL standards is outlined.
- 1 September 2025
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 17 (5)
Review, challenges, and scope of advancements in outdoor quantitative electroluminescence imaging for solar PV
Qualitative electroluminescence (EL) imaging is a prominent tool for inspecting defective photovoltaic (PV) modules in outdoor installations. While the qualitative approach has proven valuable, the developing field of quantitative EL imaging offers significant advantages by enabling a deeper evaluation of module performance from EL images. Most research on quantitative EL imaging has been conducted under controlled indoor conditions, and the literature lacks an in-depth discussion on its adaptation for outdoor PV installations. This article aims to bridge that gap by reviewing various quantitative EL approaches and examining the challenges associated with their application in PV installations. Progress in EL imaging technology is presented across key implementation aspects. Major focus is given on quantitative EL approaches, such as parametric extraction, machine learning, empirical methods, and multi-characterization techniques. A comparative assessment of these approaches is conducted, emphasizing their requirements for outdoor EL inspections, including minimum EL data acquisition needs, ease of outdoor implementation, and the capability to extract cell-level or module-level quantitative information. Based on this assessment, the applicability and potential challenges of each approach are analyzed for different PV installations, along with strategies for overcoming these challenges. Furthermore, the scope of advancements in EL data acquisition, EL software, and EL standards is outlined.
- 1 July 2024
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 16 (4)
Impact of partial shading on the performance and reliability of potential-induced degraded crystalline silicon PV module
Potential-induced degradation shunting (PID-s) is a severe degradation mechanism that significantly impacts the performance and lifespan of photovoltaic (PV) modules. The impact of PID-s is further intensified when it coincides with partial shading. Despite its significance, limited research has been focused on the combined impact of PID-s and partial shading. Therefore, this work analyzes the impact of partial shading on the performance and reliability of PID-s-affected PV module. In the literature, PID-s is reported with two natures: Ohmic and non-Ohmic. This work considers the nature and severity of PID-s in the presented investigation. Results indicate that when an Ohmic PID-s-affected PV cell is shaded in a module, it results in less power loss than when a healthy cell is shaded, but it induces a significantly high reverse current through the PID-s-affected cell. With severity, the impact of Ohmic PID-s under shading decreases. In the case of non-Ohmic PID-s, severity does not impact the performance significantly; however, shading of a non-Ohmic PID-s affected cell is more severe than Ohmic PID-s until the PID-s threshold is reached. Furthermore, bypass diode activation is delayed in both types of PID-s compared to shading on healthy cells. Overall, these findings emphasize the significance of optimizing shading strategies and mitigating PID-s effects to enhance the performance and reliability of photovoltaics. This research provides valuable insights for industry stakeholders involved in PV installation and maintenance operations.
- 1 July 2024
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 16 (4)
Impact of partial shading on the performance and reliability of potential-induced degraded crystalline silicon PV module
Potential-induced degradation shunting (PID-s) is a severe degradation mechanism that significantly impacts the performance and lifespan of photovoltaic (PV) modules. The impact of PID-s is further intensified when it coincides with partial shading. Despite its significance, limited research has been focused on the combined impact of PID-s and partial shading. Therefore, this work analyzes the impact of partial shading on the performance and reliability of PID-s-affected PV module. In the literature, PID-s is reported with two natures: Ohmic and non-Ohmic. This work considers the nature and severity of PID-s in the presented investigation. Results indicate that when an Ohmic PID-s-affected PV cell is shaded in a module, it results in less power loss than when a healthy cell is shaded, but it induces a significantly high reverse current through the PID-s-affected cell. With severity, the impact of Ohmic PID-s under shading decreases. In the case of non-Ohmic PID-s, severity does not impact the performance significantly; however, shading of a non-Ohmic PID-s affected cell is more severe than Ohmic PID-s until the PID-s threshold is reached. Furthermore, bypass diode activation is delayed in both types of PID-s compared to shading on healthy cells. Overall, these findings emphasize the significance of optimizing shading strategies and mitigating PID-s effects to enhance the performance and reliability of photovoltaics. This research provides valuable insights for industry stakeholders involved in PV installation and maintenance operations.
- Open Access
- 22 February 2024
- Published by TIB Open Publishing in SiliconPV Conference Proceedings
- Vol. 1
Unveiling the Potential of Electroluminescence Characteristics in Investigating Different Types of Defects and Degradations in c-Si PV Module
Photovoltaic (PV) cells can be characterized using current-voltage (I-V) as well as electroluminescence (EL) characteristics. However, unlike I-V, the potential of EL characteristics has not been well discussed in the literature. In this work, the impact of different types of defects on the EL characteristics is studied, and the possible use of EL characteristics in the qualitative and quantitative investigation of defects is unveiled. Defective field-aged and new modules with artificially induced defects were taken for experimental study. EL current-intensity (I-ɸ) and EL voltage-intensity (V-ɸ) characteristics were studied for the cells suffering from major defects such as cracks, busbar interconnect failure, and PID-shunting. It is observed that I-ɸ characteristic is useful in the investigation of shunting defects, whereas V-ɸ characteristic is in diagnosing defect that increases series resistance. Bulk defects within a cell affect EL calibration constants and increase cell-to-cell mismatch within a module. The findings of this work would be useful for extracting valuable information from EL images regarding defects and degradations.
- 22 February 2024
- Published by TIB Open Publishing in SiliconPV Conference Proceedings
- Vol. 1
Open AccessUnveiling the Potential of Electroluminescence Characteristics in Investigating Different Types of Defects and Degradations in c-Si PV Module
Photovoltaic (PV) cells can be characterized using current-voltage (I-V) as well as electroluminescence (EL) characteristics. However, unlike I-V, the potential of EL characteristics has not been well discussed in the literature. In this work, the impact of different types of defects on the EL characteristics is studied, and the possible use of EL characteristics in the qualitative and quantitative investigation of defects is unveiled. Defective field-aged and new modules with artificially induced defects were taken for experimental study. EL current-intensity (I-ɸ) and EL voltage-intensity (V-ɸ) characteristics were studied for the cells suffering from major defects such as cracks, busbar interconnect failure, and PID-shunting. It is observed that I-ɸ characteristic is useful in the investigation of shunting defects, whereas V-ɸ characteristic is in diagnosing defect that increases series resistance. Bulk defects within a cell affect EL calibration constants and increase cell-to-cell mismatch within a module. The findings of this work would be useful for extracting valuable information from EL images regarding defects and degradations.
- 30 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 14 (2) , 296-304
Application of Electroluminescence Imaging to Distinguish Ohmic and Non Ohmic Shunting in Inaccessible Cells Within a PV Module
Photovoltaic (PV) technology is susceptible to various defects and degradations. One such defect is shunts, which result in internal leakage paths, reducing cell performance and efficiency. Shunts can be categorised as either ohmic or non-ohmic based on the nature of sinking current with voltage. Understanding the nature of shunting is crucial for comprehending the physical phenomena occurring at shunted sites. However, current methods such as dark lock-in thermography and current-voltage ( I–V) characteristics have limitations in nondestructive characterisation of cells within an intact PV module, which require individual cell access. This article presents a novel application of electroluminescence (EL) imaging to distinguish between ohmic and non-ohmic shunting in cells within a module nondestructively. The method involves a two-step process using three EL images at different currents. Firstly, shunted and nonshunted cells are differentiated based on low current EL image. In the second step, ohmic and non-ohmic shunted cells are distinguished using Shunt-Index value based on current-EL intensity characteristics. Non-ohmic shunted cells show a linear behaviour on a log-log scaled current-EL intensity characteristics, while ohmic shunted cells exhibit a linear behaviour. Experimental validation demonstrates the successful identification of shunted cells and their nature, providing valuable insights for shunt-related PV cell analysis.
- 30 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 14 (2) , 296-304
Application of Electroluminescence Imaging to Distinguish Ohmic and Non Ohmic Shunting in Inaccessible Cells Within a PV Module
Photovoltaic (PV) technology is susceptible to various defects and degradations. One such defect is shunts, which result in internal leakage paths, reducing cell performance and efficiency. Shunts can be categorised as either ohmic or non-ohmic based on the nature of sinking current with voltage. Understanding the nature of shunting is crucial for comprehending the physical phenomena occurring at shunted sites. However, current methods such as dark lock-in thermography and current-voltage ( I–V) characteristics have limitations in nondestructive characterisation of cells within an intact PV module, which require individual cell access. This article presents a novel application of electroluminescence (EL) imaging to distinguish between ohmic and non-ohmic shunting in cells within a module nondestructively. The method involves a two-step process using three EL images at different currents. Firstly, shunted and nonshunted cells are differentiated based on low current EL image. In the second step, ohmic and non-ohmic shunted cells are distinguished using Shunt-Index value based on current-EL intensity characteristics. Non-ohmic shunted cells show a linear behaviour on a log-log scaled current-EL intensity characteristics, while ohmic shunted cells exhibit a linear behaviour. Experimental validation demonstrates the successful identification of shunted cells and their nature, providing valuable insights for shunt-related PV cell analysis.
- Open Access
- 20 December 2023
- Published by Elsevier in Solar Energy Advances
- Vol. 4
Unveiling the Potential of Infrared Thermography in Quantitative Investigation of Potential-Induced Degradation in Crystalline Silicon PV Module
- 20 December 2023
- Published by Elsevier in Solar Energy Advances
- Vol. 4
Open AccessUnveiling the Potential of Infrared Thermography in Quantitative Investigation of Potential-Induced Degradation in Crystalline Silicon PV Module
- 15 September 2023
- Published by Elsevier in Solar Energy
- Vol. 264
Progress in module level quantitative electroluminescence imaging of crystalline silicon PV module: A review
- 15 September 2023
- Published by Elsevier in Solar Energy
- Vol. 264
Progress in module level quantitative electroluminescence imaging of crystalline silicon PV module: A review
- 27 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 13 (1) , 141-149
Application of Infrared Thermography for Cell-Level Power Estimation of PID-s Impacted Crystalline Silicon PV Module
The potential-induced degradation shunting (PID-s) is a severe degradation mechanism that shows a significant drop in a module power in a very short duration. Hence, timely qualitative and quantitative evaluation of PID-s is required for taking preventive measures. Current–voltage ( I–V) characterization and electroluminescence (EL) imaging are widely used to assess the PID-s; however, the use of I–V is cumbersome in the field, whereas EL cannot quantify severely affected PID-s modules since heavily shunted cells do not have active EL emission. In this article, a quantitative application of inverse infrared (IR INV ) imaging with biasing (performed under conditions similar to EL) is proposed for the assessment of mild to severe forms of PID-s. The relationship between cell power loss and heat dissipation with PID-s progression is studied. It was observed that PID-s follows a characteristic temperature pattern in which cell temperature is proportional to the severity of PID-s. Hence, temperature is used as a determinant of PID-s. Based on this analysis, the generalized model is developed to estimate the cell-level power loss caused by PID-s using the cell temperatures obtained from IR INV images. The proposed model is experimentally tested on 20 mono- and polycrystalline silicon photovoltaic modules containing mild to severe states of PID-s. Results have shown that the proposed model enables the estimation of PID-s power loss within a module with a maximum relative error of $ \pm $ 5%.
- 27 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 13 (1) , 141-149
Application of Infrared Thermography for Cell-Level Power Estimation of PID-s Impacted Crystalline Silicon PV Module
The potential-induced degradation shunting (PID-s) is a severe degradation mechanism that shows a significant drop in a module power in a very short duration. Hence, timely qualitative and quantitative evaluation of PID-s is required for taking preventive measures. Current–voltage ( I–V) characterization and electroluminescence (EL) imaging are widely used to assess the PID-s; however, the use of I–V is cumbersome in the field, whereas EL cannot quantify severely affected PID-s modules since heavily shunted cells do not have active EL emission. In this article, a quantitative application of inverse infrared (IR INV ) imaging with biasing (performed under conditions similar to EL) is proposed for the assessment of mild to severe forms of PID-s. The relationship between cell power loss and heat dissipation with PID-s progression is studied. It was observed that PID-s follows a characteristic temperature pattern in which cell temperature is proportional to the severity of PID-s. Hence, temperature is used as a determinant of PID-s. Based on this analysis, the generalized model is developed to estimate the cell-level power loss caused by PID-s using the cell temperatures obtained from IR INV images. The proposed model is experimentally tested on 20 mono- and polycrystalline silicon photovoltaic modules containing mild to severe states of PID-s. Results have shown that the proposed model enables the estimation of PID-s power loss within a module with a maximum relative error of $ \pm $ 5%.
- 21 October 2022
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 31 (3) , 269-282
Generalized quantitative electroluminescence method for the performance evaluation of defective and unevenly degraded crystalline silicon photovoltaic module
Photovoltaic (PV) module experiences multiple cell defects and degradation in a field operation, which significantly reduces module output. Hence, quantitative assessment of a PV module is essential to ensure module operation within a desirable limit. This article proposes the generalized quantitative electroluminescence (g‐QUEL) method to evaluate the performance of a defective and unevenly degraded PV module from the EL images. Four module classes are considered from the view of field applications, such as new, PID‐s affected, field aged shunted, and nonshunted modules. The effects of defects and degradation on fundamental cell electroluminescence (EL) characteristics and constants are analyzed for each class. Based on this analysis, the g‐QUEL method is developed, which utilizes module multiple EL images, datasheet information, and terminal voltage measurements for quantification. First, a test module is qualitatively assessed to identify the present defects and classified into one of four classes. In the second part, the g‐QUEL algorithm is applied to a test module in a customized manner to extract five or seven parameters of a PV cell. Subsequently, a single or two diode model simulation is carried out at a module, submodule, or cell level to estimate module output by generating I‐V curve. Experimental verification of the proposed method was conducted on five test modules of each class. Results demonstrate the accuracy and effectiveness of the g‐QUEL method as it evaluates the output power of new to field‐aged modules with a relative error ≤±3%.
- 21 October 2022
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 31 (3) , 269-282
Generalized quantitative electroluminescence method for the performance evaluation of defective and unevenly degraded crystalline silicon photovoltaic module
Photovoltaic (PV) module experiences multiple cell defects and degradation in a field operation, which significantly reduces module output. Hence, quantitative assessment of a PV module is essential to ensure module operation within a desirable limit. This article proposes the generalized quantitative electroluminescence (g‐QUEL) method to evaluate the performance of a defective and unevenly degraded PV module from the EL images. Four module classes are considered from the view of field applications, such as new, PID‐s affected, field aged shunted, and nonshunted modules. The effects of defects and degradation on fundamental cell electroluminescence (EL) characteristics and constants are analyzed for each class. Based on this analysis, the g‐QUEL method is developed, which utilizes module multiple EL images, datasheet information, and terminal voltage measurements for quantification. First, a test module is qualitatively assessed to identify the present defects and classified into one of four classes. In the second part, the g‐QUEL algorithm is applied to a test module in a customized manner to extract five or seven parameters of a PV cell. Subsequently, a single or two diode model simulation is carried out at a module, submodule, or cell level to estimate module output by generating I‐V curve. Experimental verification of the proposed method was conducted on five test modules of each class. Results demonstrate the accuracy and effectiveness of the g‐QUEL method as it evaluates the output power of new to field‐aged modules with a relative error ≤±3%.
- 19 September 2022
- Published by Elsevier in Solar Energy
- Vol. 245, 183-192
Standardized applications of electroluminescence imaging for efficient investigation of potential-induced degradation shunting in crystalline silicon photovoltaic module
- 19 September 2022
- Published by Elsevier in Solar Energy
- Vol. 245, 183-192
Standardized applications of electroluminescence imaging for efficient investigation of potential-induced degradation shunting in crystalline silicon photovoltaic module
- 21 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 11 (6) , 1470-1478
Novel Quantitative Electroluminescence Method for Detailed Performance Analysis of PID-s Affected Crystalline Silicon PV Module
Potential induced degradation shunting (PID-s) is a rapid degradation mode, which severely affects the performance and lifetime of a photovoltaic (PV) module. Electroluminescence imaging is generally used to investigate PID-s; however, mainly, its use has only been limited to qualitative work. In this article, the novel quantitative electroluminescence (QUEL) method is proposed for the detailed performance evaluation of a PID-s affected module. The effects of PID-s progression on the fundamental PV cell characteristics are analyzed. More emphasis is given to a cell current-electroluminescence (EL) intensity ( I EL -φ EL ) characteristic as it enables the extraction of individual cell information within a module. Analysis reveals, a nonlinearity in I EL -φ EL characteristic solely reflects the effect of shunting. The degree of nonlinearity depends on the nature and severity of PID-s. Whereas PID-s insignificantly affects cell voltage-EL intensity characteristic. Based on this analysis, the two stage QUEL method is developed; it requires a minimum four EL images, a module datasheet, and EL measurements. In the first stage, the QUEL algorithm extracts seven parameters of an individual PV cell mainly by decoding a cell I EL - φ EL curve. The second stage involves two diode model based simulations of an individual cell and module, which generates I-V curves at desired operating conditions. The proposed method was experimentally validated with 10 individual cells and modules. Results show that the QUEL method estimates cell or module power with <±3% relative error. Also, generated I-V overlaps well with an experimental I-V curve and enables detailed cell level quantitative analysis of shunting defects and degradation.
- 21 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 11 (6) , 1470-1478
Novel Quantitative Electroluminescence Method for Detailed Performance Analysis of PID-s Affected Crystalline Silicon PV Module
Potential induced degradation shunting (PID-s) is a rapid degradation mode, which severely affects the performance and lifetime of a photovoltaic (PV) module. Electroluminescence imaging is generally used to investigate PID-s; however, mainly, its use has only been limited to qualitative work. In this article, the novel quantitative electroluminescence (QUEL) method is proposed for the detailed performance evaluation of a PID-s affected module. The effects of PID-s progression on the fundamental PV cell characteristics are analyzed. More emphasis is given to a cell current-electroluminescence (EL) intensity ( I EL -φ EL ) characteristic as it enables the extraction of individual cell information within a module. Analysis reveals, a nonlinearity in I EL -φ EL characteristic solely reflects the effect of shunting. The degree of nonlinearity depends on the nature and severity of PID-s. Whereas PID-s insignificantly affects cell voltage-EL intensity characteristic. Based on this analysis, the two stage QUEL method is developed; it requires a minimum four EL images, a module datasheet, and EL measurements. In the first stage, the QUEL algorithm extracts seven parameters of an individual PV cell mainly by decoding a cell I EL - φ EL curve. The second stage involves two diode model based simulations of an individual cell and module, which generates I-V curves at desired operating conditions. The proposed method was experimentally validated with 10 individual cells and modules. Results show that the QUEL method estimates cell or module power with <±3% relative error. Also, generated I-V overlaps well with an experimental I-V curve and enables detailed cell level quantitative analysis of shunting defects and degradation.