Liyuan Sun
Liyuan Sun has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Haojian Duan
School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing (USTB), Beijing 100083, China
1 shared publication - Lifeng Zhang
North China University of Technology
1 shared publication - Wen Yang
University of Science and Technology Beijing (USTB)
1 shared publication - Xiaoming Ding
AECC Beijing Institute of Aeronautical Materials, Beijing 100095, China
1 shared publication Xu Huang
Beijing Institute of Aeronautical Materials , Beijing , China
1 shared publication- Ying Ren
School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing, China
1 shared publication
Latest Publications
- Open Access
- 19 June 2018
- Published by Walter de Gruyter GmbH in High Temperature Materials and Processes
- Vol. 38 (2019) , 178-182
Research on Three-Roll Screw Rolling Process for Ti6Al4V Titanium Alloy Bar
The effects of both the microstructure and the original grain size on three-roll screw rolling process of Ti6Al4V titanium alloy bar were studied in the present work. The microstructure of Ti6Al4V titanium bar had a great influence on the mechanical properties of the rolling bar. When the original size was large, the grains were apparently refined but the microstructure was uneven. But for semi-finished titanium bar composed of fine equiaxed grains, the grains after rolling were fine and uniform. During the rolling process, the Ti6Al4V titanium alloy microstructure changed from equiaxed structure to the basket-weave one. After annealing at 800℃ for 1.5 hours and then cooling in air, the average tensile strength decreased from 984 MPa to 964 MPa; while after annealing at 950℃ for 1.5 hours and then cooling by water, and aging at 540℃ for 6 hours then cooling by air, the average tensile strength increased from 979 MPa to 1107 MPa.
- 19 June 2018
- Published by Walter de Gruyter GmbH in High Temperature Materials and Processes
- Vol. 38 (2019) , 178-182
Open AccessResearch on Three-Roll Screw Rolling Process for Ti6Al4V Titanium Alloy Bar
The effects of both the microstructure and the original grain size on three-roll screw rolling process of Ti6Al4V titanium alloy bar were studied in the present work. The microstructure of Ti6Al4V titanium bar had a great influence on the mechanical properties of the rolling bar. When the original size was large, the grains were apparently refined but the microstructure was uneven. But for semi-finished titanium bar composed of fine equiaxed grains, the grains after rolling were fine and uniform. During the rolling process, the Ti6Al4V titanium alloy microstructure changed from equiaxed structure to the basket-weave one. After annealing at 800℃ for 1.5 hours and then cooling in air, the average tensile strength decreased from 984 MPa to 964 MPa; while after annealing at 950℃ for 1.5 hours and then cooling by water, and aging at 540℃ for 6 hours then cooling by air, the average tensile strength increased from 979 MPa to 1107 MPa.
- 29 May 2015
- Published by Springer Nature in Metallurgical and Materials Transactions B
- Vol. 46 (4) , 1809-1825
Stability Diagram of Mg-Al-O System Inclusions in Molten Steel
- 29 May 2015
- Published by Springer Nature in Metallurgical and Materials Transactions B
- Vol. 46 (4) , 1809-1825
Stability Diagram of Mg-Al-O System Inclusions in Molten Steel