Ranjiv Gupta
Research Subjects
Ranjiv Gupta has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Jorge Gabriel Zornberg
Univ. of Texas at Austin
2 shared publications - R. David Espinoza
Geosyntec Consultants, Washington, DC, USA
2 shared publications - Chunling Li
Geosyntec CAT Advisory
1 shared publication Jeremy W. F. Morris
Geosyntec Consultants
1 shared publication- Jeremy W. F. Morris
Geosyntec Consultants
1 shared publication - Jeremy W.F. Morris
Geosyntec Consultants, 10220 Old Columbia Road, Suite A, Columbia, MD 21046, USA
1 shared publication
Latest Publications
- 6 June 2018
- Published by American Society of Civil Engineers (ASCE)
- p. 380-390
Design Methodology for PVD Installation in Embankments over Soft Soils–A Case Study
Prefabricated vertical drains (PVDs) used for embankment construction over saturated soft cohesive soil deposits accelerate consolidation and reduce construction time by reducing the drainage path from tens of meters to 1–2 m. The current design methodologies assume undrained conditions in the cohesive soil deposit even after PVD’s are installed. This assumption is appropriate if the deposits are sufficiently thick such that excess pore pressures generated during construction do not dissipate before the next lift of soil is placed. However, for most cohesive soil deposits the drainage capability is significantly improved immediately after the installation of PVDs and the assumption of undrained conditions for design is overly conservative. This design assumption may render an embankment construction unfeasible unless ground improvement techniques are used to significantly enhance the foundation strength. This paper presents a hybrid drained-undrained (HDU) model for construction of embankments over soft soils that accounts for the improved soil drainage conditions after installation of PVDs and incorporates the drained shear strength of foundation soils as a function of the embankment construction time. A field case study is presented where the use of HDU model to analyze PVD installation helped construction of a mile long MSE berm in soft soil deposit without need for additional foundation improvement, thereby providing significant cost savings for the project.
- 6 June 2018
- Published by American Society of Civil Engineers (ASCE)
- p. 380-390
Design Methodology for PVD Installation in Embankments over Soft Soils–A Case Study
Prefabricated vertical drains (PVDs) used for embankment construction over saturated soft cohesive soil deposits accelerate consolidation and reduce construction time by reducing the drainage path from tens of meters to 1–2 m. The current design methodologies assume undrained conditions in the cohesive soil deposit even after PVD’s are installed. This assumption is appropriate if the deposits are sufficiently thick such that excess pore pressures generated during construction do not dissipate before the next lift of soil is placed. However, for most cohesive soil deposits the drainage capability is significantly improved immediately after the installation of PVDs and the assumption of undrained conditions for design is overly conservative. This design assumption may render an embankment construction unfeasible unless ground improvement techniques are used to significantly enhance the foundation strength. This paper presents a hybrid drained-undrained (HDU) model for construction of embankments over soft soils that accounts for the improved soil drainage conditions after installation of PVDs and incorporates the drained shear strength of foundation soils as a function of the embankment construction time. A field case study is presented where the use of HDU model to analyze PVD installation helped construction of a mile long MSE berm in soft soil deposit without need for additional foundation improvement, thereby providing significant cost savings for the project.
- 6 June 2017
- Published by Springer Nature
- p. 277-284
Sustainable Waste Management Using MSE Berms at Disposal Sites
- 6 June 2017
- Published by Springer Nature
- p. 277-284
Sustainable Waste Management Using MSE Berms at Disposal Sites
- 30 March 2017
- Published by American Society of Civil Engineers (ASCE)
- p. 236-246
Effect of Geogrid Geometry on Interface Resistance in a Pullout Test
This paper presents the effect of aperture size on the low displacement stiffness response of geogrids subjected to pullout loading. The aperture size of geogrid was varied by cutting ribs of geogrids in the pullout tests. Two types of geogrids were tested at two normal pressures (21 kPa and 35 kPa). The soil-geosynthetic composite (SGC) model was used to compute the low displacement interface stiffness (KSGC) of the geogrids. Based on the analysis of laboratory tests using SGC model, the results showed response of geogrids was highly dependent on the aperture size. The geogrid with original aperture size showed the highest KSGC value. As the size of the aperture increased, the KSGC decreased possibly due to reduction in the passive resistance of transverse members and the loss of confinement at the junctions of the geogrid.
- 30 March 2017
- Published by American Society of Civil Engineers (ASCE)
- p. 236-246
Effect of Geogrid Geometry on Interface Resistance in a Pullout Test
This paper presents the effect of aperture size on the low displacement stiffness response of geogrids subjected to pullout loading. The aperture size of geogrid was varied by cutting ribs of geogrids in the pullout tests. Two types of geogrids were tested at two normal pressures (21 kPa and 35 kPa). The soil-geosynthetic composite (SGC) model was used to compute the low displacement interface stiffness (KSGC) of the geogrids. Based on the analysis of laboratory tests using SGC model, the results showed response of geogrids was highly dependent on the aperture size. The geogrid with original aperture size showed the highest KSGC value. As the size of the aperture increased, the KSGC decreased possibly due to reduction in the passive resistance of transverse members and the loss of confinement at the junctions of the geogrid.
- 8 August 2016
- Published by American Society of Civil Engineers (ASCE)
- p. 653-662
Financial Sustainability as a Metric for Infrastructure Projects
Various sustainability rating systems have been developed to provide an objective framework for assessing infrastructure projects. Examples include civil engineering environmental quality assessment and award scheme (CEEQUAL), Greenroads, Envision, infrastructure voluntary evaluation sustainability tool (INVEST), and infrastructure sustainability (IS). These rating systems aim to help the construction industry identify and quantify sustainable approaches that are beneficial to infrastructure projects. Most of these infrastructure rating systems have their origins in the rating systems developed for evaluating commercial buildings, such as building research establishment environmental assessment methodology (BREEAM), leadership in energy and environmental design (LEED), green globes, and Energy Star, which poses a few challenges when these types of tools are applied to broader infrastructure projects. Of most significance is the lack of a financial sustainability metric within the tools. This is understandable: buildings generally have a well-defined and relatively short service life for revenue generation, clear redevelopment options to perpetuate the real property value, and few long-term liabilities or legacy issues (e.g., pollution potential). However, other infrastructure projects have much longer service lives and are even expected to remain viable over an indefinite post-service period long after revenue generation has ended. This paper presents a review of sustainability metrics used by various infrastructure rating systems and compare their advantages and disadvantages. Thereafter, the paper discusses the need to engage and encourage decision makers to invest in more sustainable approaches for developing large infrastructure projects with very long term service and post-service lives by including a financial metric to existing rating systems. Finally the paper discusses a few financing options which could help the construction industry transition to more sustainable design approaches while simultaneously protecting their return on investment.
- 8 August 2016
- Published by American Society of Civil Engineers (ASCE)
- p. 653-662
Financial Sustainability as a Metric for Infrastructure Projects
Various sustainability rating systems have been developed to provide an objective framework for assessing infrastructure projects. Examples include civil engineering environmental quality assessment and award scheme (CEEQUAL), Greenroads, Envision, infrastructure voluntary evaluation sustainability tool (INVEST), and infrastructure sustainability (IS). These rating systems aim to help the construction industry identify and quantify sustainable approaches that are beneficial to infrastructure projects. Most of these infrastructure rating systems have their origins in the rating systems developed for evaluating commercial buildings, such as building research establishment environmental assessment methodology (BREEAM), leadership in energy and environmental design (LEED), green globes, and Energy Star, which poses a few challenges when these types of tools are applied to broader infrastructure projects. Of most significance is the lack of a financial sustainability metric within the tools. This is understandable: buildings generally have a well-defined and relatively short service life for revenue generation, clear redevelopment options to perpetuate the real property value, and few long-term liabilities or legacy issues (e.g., pollution potential). However, other infrastructure projects have much longer service lives and are even expected to remain viable over an indefinite post-service period long after revenue generation has ended. This paper presents a review of sustainability metrics used by various infrastructure rating systems and compare their advantages and disadvantages. Thereafter, the paper discusses the need to engage and encourage decision makers to invest in more sustainable approaches for developing large infrastructure projects with very long term service and post-service lives by including a financial metric to existing rating systems. Finally the paper discusses a few financing options which could help the construction industry transition to more sustainable design approaches while simultaneously protecting their return on investment.
- 24 February 2014
- Published by American Society of Civil Engineers (ASCE)
- p. 2543-2557
Laboratory Pullout Equipment for Testing Soil-Geosynthetic Interface for Reinforced Flexible Pavement Design
Pullout tests for geosynthetics were developed to support the design of MSE walls to calculate maximum force required for internal stability calculation. In this case, the stability of the system at ultimate or limit state was of concern, and results were reported in terms of coefficient of interaction (Ci) for a given geosynthetic and soil interface. However, to quantify the performance of geosynthetics used in flexible pavements, the soil-geosynthetic interface characteristics at low displacement magnitude is important. An analytical model assesses the performance of soil-geosynthetic interaction, and a new parameter to quantify soil-geosynthetic interaction (KSG1) was defined. This parameter is a function of yield shear stress and confined stiffness of the geosynthetic, which can be obtained from a pullout test. The quantification of this new parameter required test equipment that would be able to define the low displacement behavior of soil-geosynthetic interfaces. However, the conventional pullout box available in most laboratories is capable of predicting the ultimate pullout force as required for MSE wall design, which requires long testing times. To reduce the testing times and to predict the soil-geosynthetic interface characteristics at low displacements, new pullout test equipment was developed that allows testing geosynthetics for reinforced pavement application at low displacement magnitudes. This paper describes the development of new pullout test equipment and discusses the interpretation of test results for a planar geosynthetic specimen to calibrate the proposed parameter based on the analytical model. Finally, the effect of geosynthetic orientation in the pullout equipment on the model parameters and its implication on design of reinforced pavements is discussed.
- 24 February 2014
- Published by American Society of Civil Engineers (ASCE)
- p. 2543-2557
Laboratory Pullout Equipment for Testing Soil-Geosynthetic Interface for Reinforced Flexible Pavement Design
Pullout tests for geosynthetics were developed to support the design of MSE walls to calculate maximum force required for internal stability calculation. In this case, the stability of the system at ultimate or limit state was of concern, and results were reported in terms of coefficient of interaction (Ci) for a given geosynthetic and soil interface. However, to quantify the performance of geosynthetics used in flexible pavements, the soil-geosynthetic interface characteristics at low displacement magnitude is important. An analytical model assesses the performance of soil-geosynthetic interaction, and a new parameter to quantify soil-geosynthetic interaction (KSG1) was defined. This parameter is a function of yield shear stress and confined stiffness of the geosynthetic, which can be obtained from a pullout test. The quantification of this new parameter required test equipment that would be able to define the low displacement behavior of soil-geosynthetic interfaces. However, the conventional pullout box available in most laboratories is capable of predicting the ultimate pullout force as required for MSE wall design, which requires long testing times. To reduce the testing times and to predict the soil-geosynthetic interface characteristics at low displacements, new pullout test equipment was developed that allows testing geosynthetics for reinforced pavement application at low displacement magnitudes. This paper describes the development of new pullout test equipment and discusses the interpretation of test results for a planar geosynthetic specimen to calibrate the proposed parameter based on the analytical model. Finally, the effect of geosynthetic orientation in the pullout equipment on the model parameters and its implication on design of reinforced pavements is discussed.
- 25 February 2013
- Published by American Society of Civil Engineers (ASCE)
- p. 1475-1489
Converting Waste Disposal Sites to Renewable Energy Sites Using MSE Berms
To extend the operational life of a landfill, a popular approach is to increase the disposal capacity with a vertical expansion gained by constructing a mechanically stabilized earth (MSE) berm around the perimeter of the landfill footprint. Landfill owners are also increasingly interested in adopting sustainable approaches to landfill management over their long-term life (i.e., operational plus post-closure maintenance periods), which generally means that beneficial reuse options that enable a site to become economically self-sustaining in the post-closure period must be sought. By combining these two goals, this study demonstrates that by strategically integrating a vertical expansion with implementation of renewable energy technologies (RETs), a landfill property can be transitioned over the remainder of its operational and post-closure life from a waste disposal facility to a renewable energy park. This study outlines an approach used to assess how phased installation of these RETs could be implemented during and after construction of a MSE berm at a landfill to optimize beneficial reuse of the site. Four RETs were evaluated as part of this study: solar photovoltaic (PV) arrays, wind turbines, methane gas utilization, and use of the landfill as a geothermal heat source. The energy potential at the landfill from the four RETs is available in two major forms: (1) electrical energy from solar and wind sources, and (2) heat or thermal energy from methane and the GT source. These forms of energy become available to differing degrees at different stages of the landfill lifecycle. Therefore, a key focus of the study was identifying the optimal timing for cost-effective deployment of each RET, particularly where this is critically dependent on the sequence of MSE berm construction. By strategically linking RET implementation with construction of the MSE berm, it is demonstrated that a landfill expansion would have a beneficial impact on the energy generation potential of all RETs over both the short- and long-term. For example, the significantly increased area and/or height of the expanded landfill side slopes and top surface improves the scope of PV or wind turbine deployment. In terms of local impacts, transitioning the landfill to a renewable energy park would enhance the sustainable use of the property while the renewable energy produced can be offered to the local community as a resource to offset their consumption of energy from fossil fuels and thus reduce their carbon footprint.
- 25 February 2013
- Published by American Society of Civil Engineers (ASCE)
- p. 1475-1489
Converting Waste Disposal Sites to Renewable Energy Sites Using MSE Berms
To extend the operational life of a landfill, a popular approach is to increase the disposal capacity with a vertical expansion gained by constructing a mechanically stabilized earth (MSE) berm around the perimeter of the landfill footprint. Landfill owners are also increasingly interested in adopting sustainable approaches to landfill management over their long-term life (i.e., operational plus post-closure maintenance periods), which generally means that beneficial reuse options that enable a site to become economically self-sustaining in the post-closure period must be sought. By combining these two goals, this study demonstrates that by strategically integrating a vertical expansion with implementation of renewable energy technologies (RETs), a landfill property can be transitioned over the remainder of its operational and post-closure life from a waste disposal facility to a renewable energy park. This study outlines an approach used to assess how phased installation of these RETs could be implemented during and after construction of a MSE berm at a landfill to optimize beneficial reuse of the site. Four RETs were evaluated as part of this study: solar photovoltaic (PV) arrays, wind turbines, methane gas utilization, and use of the landfill as a geothermal heat source. The energy potential at the landfill from the four RETs is available in two major forms: (1) electrical energy from solar and wind sources, and (2) heat or thermal energy from methane and the GT source. These forms of energy become available to differing degrees at different stages of the landfill lifecycle. Therefore, a key focus of the study was identifying the optimal timing for cost-effective deployment of each RET, particularly where this is critically dependent on the sequence of MSE berm construction. By strategically linking RET implementation with construction of the MSE berm, it is demonstrated that a landfill expansion would have a beneficial impact on the energy generation potential of all RETs over both the short- and long-term. For example, the significantly increased area and/or height of the expanded landfill side slopes and top surface improves the scope of PV or wind turbine deployment. In terms of local impacts, transitioning the landfill to a renewable energy park would enhance the sustainable use of the property while the renewable energy produced can be offered to the local community as a resource to offset their consumption of energy from fossil fuels and thus reduce their carbon footprint.