Andrey N. Kudryashov
Research Subjects
Research Interests
Andrey N. Kudryashov has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Aleksandr Ivanovich Lotkov
Institute of Strength Physics and Materials Science, Siberian Branch, Russian Academy of Sciences, Tomsk, Russia
7 shared publications - Oleg A. Kashin
Institute of Strength Physics and Materials Science SB RAS, Tomsk, 634055 Russia
7 shared publications - Konstantin V. Krukovskii
Institute of Strength Physics and Materials Science, Siberian Branch, Russian Academy of Sciences, Tomsk, Russia
5 shared publications Dmitry P. Borisov
National Research Tomsk State University, Tomsk, 634050, Russia
3 shared publications- Vladimir M. Kuznetsov
Laboratory of Nanostructured Surfaces and Coatings, Tomsk State University, 634050 Tomsk, Russia
2 shared publications - Yuliya A. Kudryavtseva
Federal State Budgetary Institution “Research Institute for Complex Issues of Cardiovascular Diseases
2 shared publications
Latest Publications
- 1 January 2017
- Published by Elsevier in Materials Today: Proceedings
- Vol. 4 (3) , 4647-4651
Structure and properties of self-expanding intravascular NiTi stents doped with Si ions
- 1 January 2017
- Published by Elsevier in Materials Today: Proceedings
- Vol. 4 (3) , 4647-4651
Structure and properties of self-expanding intravascular NiTi stents doped with Si ions
- 1 January 2017
- Published by AIP Publishing in AIP Conference Proceedings
Mechanical behavior of deformed intravascular NiTi stents differing in design. Numerical simulation
Self-expanding intravascular NiTi stents serve to recover the lumen of vessels suffered from atherosclerotic stenosis. During their manufacturing or functioning in blood vessels, the stents experience different strains and local stresses that may result in dangerous defects or fracture. Here, using the method of movable cellular automata, we analyze how the design of a stent influences its stress state during shaping to a desired diameter on a mandrel. We consider repeated segments of different stents under two loads: uniform diametric expansion of their crown and expansion with relative displacements. The simulation data agree well with experiments, revealing critical strain, stress, and their localization sites at the shaping stage, and provide the way toward optimum stent designs to minimize the critical stress during shaping.
- 1 January 2017
- Published by AIP Publishing in AIP Conference Proceedings
Mechanical behavior of deformed intravascular NiTi stents differing in design. Numerical simulation
Self-expanding intravascular NiTi stents serve to recover the lumen of vessels suffered from atherosclerotic stenosis. During their manufacturing or functioning in blood vessels, the stents experience different strains and local stresses that may result in dangerous defects or fracture. Here, using the method of movable cellular automata, we analyze how the design of a stent influences its stress state during shaping to a desired diameter on a mandrel. We consider repeated segments of different stents under two loads: uniform diametric expansion of their crown and expansion with relative displacements. The simulation data agree well with experiments, revealing critical strain, stress, and their localization sites at the shaping stage, and provide the way toward optimum stent designs to minimize the critical stress during shaping.
- 1 January 2016
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1783 (1) , 020082
Plasma immersion ion implantation for surface treatment of complex branched structures
The paper presents experimental results demonstrating the capabilities of plasma immersion ion implantation of silicon (Si) for surface treatment of complex branched structures such are self-expanding intravascular nickel-titanium (NiTi) stents. Using NiTi stents of diameter 4 and 8 mm, it is shown that plasma immersion ion implantation can provide rather homogeneous doping of their outer and inner surfaces with Si atoms. Also presented are research data on the processes that determine the thickness, composition, and structure of surface layers subjected to this type of treatment.
- 1 January 2016
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1783 (1) , 020082
Plasma immersion ion implantation for surface treatment of complex branched structures
The paper presents experimental results demonstrating the capabilities of plasma immersion ion implantation of silicon (Si) for surface treatment of complex branched structures such are self-expanding intravascular nickel-titanium (NiTi) stents. Using NiTi stents of diameter 4 and 8 mm, it is shown that plasma immersion ion implantation can provide rather homogeneous doping of their outer and inner surfaces with Si atoms. Also presented are research data on the processes that determine the thickness, composition, and structure of surface layers subjected to this type of treatment.
- 1 January 2016
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1783 (1) , 020136
The development of self-expanding peripheral stent with ion-modified surface layer
In work researches of chemical composition of surface layers of self-expanding stents of nickel-titanium (NiTi) and their functional and mechanical properties after plasma immersion processing by ions of silicon (Si). It is established that in the treatment in the inner and outer surfaces of stents formed doped silicon layer with a thickness of 80 nm. The formation of the doped layer does not impair the functional properties of the stent. At human body temperature, the stent is fully restore its shape after removing the deforming load. The resulting graph of loading of stents during their compression between parallel plates. The research results allow the conclusion that Si-doped stents are promising for treatment of peripheral vascular disease. However, related studies on laboratory animals are required.
- 1 January 2016
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1783 (1) , 020136
The development of self-expanding peripheral stent with ion-modified surface layer
In work researches of chemical composition of surface layers of self-expanding stents of nickel-titanium (NiTi) and their functional and mechanical properties after plasma immersion processing by ions of silicon (Si). It is established that in the treatment in the inner and outer surfaces of stents formed doped silicon layer with a thickness of 80 nm. The formation of the doped layer does not impair the functional properties of the stent. At human body temperature, the stent is fully restore its shape after removing the deforming load. The resulting graph of loading of stents during their compression between parallel plates. The research results allow the conclusion that Si-doped stents are promising for treatment of peripheral vascular disease. However, related studies on laboratory animals are required.
- 1 January 2016
- Published by AIP Publishing
- Vol. 1760 (1) , 020044
Effect of plasma immersion ion implantation in TiNi implants on its interaction with animal subcutaneous tissues
Here we investigated in vivo interaction of Si-modified titanium nickelide (TiNi) samples with adjacent tissues in a rat subcutaneous implant model to assess the impact of the modification on the biocompatibility of the implant. Modification was performed by plasma immersion ion processing, which allows doping of different elements into surface layers of complex-shaped articles. The aim of modification was to reduce the level of toxic Ni ions on the implant surface for increasing biocompatibility. We identified a thin connective tissue capsule, endothelial cells, and capillary-like structures around the Si-modified implants both 30 and 90 days postimplantation. No signs of inflammation were found. In conclusion, modification of TiNi samples with Si ions increases biocompatibility of the implant.
- 1 January 2016
- Published by AIP Publishing
- Vol. 1760 (1) , 020044
Effect of plasma immersion ion implantation in TiNi implants on its interaction with animal subcutaneous tissues
Here we investigated in vivo interaction of Si-modified titanium nickelide (TiNi) samples with adjacent tissues in a rat subcutaneous implant model to assess the impact of the modification on the biocompatibility of the implant. Modification was performed by plasma immersion ion processing, which allows doping of different elements into surface layers of complex-shaped articles. The aim of modification was to reduce the level of toxic Ni ions on the implant surface for increasing biocompatibility. We identified a thin connective tissue capsule, endothelial cells, and capillary-like structures around the Si-modified implants both 30 and 90 days postimplantation. No signs of inflammation were found. In conclusion, modification of TiNi samples with Si ions increases biocompatibility of the implant.
- 1 January 2015
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1683, 020078
Structural phase states in nickel-titanium surface layers doped with silicon by plasma immersion ion implantation
The paper reports on a study of NiTi-based alloys used for manufacturing self-expanding intravascular stents to elucidate how the technological modes of plasma immersion ion implantation with silicon influence the chemical and phase composition of their surface layers. It is shown that two types of surface structure can be obtained depending on the mode of plasma immersion implantation: quasi-amorphous Si coating and Si-doped surface layer. The Si-doped surface layer contains new phases: a phase structured as the main B2 phase of NiTi but with a lower lattice parameter, R phase, and phase of highly dispersed SiO2 precipitates.
- 1 January 2015
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1683, 020078
Structural phase states in nickel-titanium surface layers doped with silicon by plasma immersion ion implantation
The paper reports on a study of NiTi-based alloys used for manufacturing self-expanding intravascular stents to elucidate how the technological modes of plasma immersion ion implantation with silicon influence the chemical and phase composition of their surface layers. It is shown that two types of surface structure can be obtained depending on the mode of plasma immersion implantation: quasi-amorphous Si coating and Si-doped surface layer. The Si-doped surface layer contains new phases: a phase structured as the main B2 phase of NiTi but with a lower lattice parameter, R phase, and phase of highly dispersed SiO2 precipitates.
- 1 January 2015
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1683, 020126
Interaction of human endothelial cells and nickel-titanium materials modified with silicon ions
The paper studies the influence of chemical and phase compositions of NiTi surface layers modified with Si ions by plasma immersion implantation on their interaction with endothelial cells. It is shown that certain technological modes of Si ion implantation enhance the adhesion, proliferation, and viability of endothelial cells. It is found that the Si-modified NiTi surface is capable of stimulating the formation of capillary-like structures in the cell culture.
- 1 January 2015
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1683, 020126
Interaction of human endothelial cells and nickel-titanium materials modified with silicon ions
The paper studies the influence of chemical and phase compositions of NiTi surface layers modified with Si ions by plasma immersion implantation on their interaction with endothelial cells. It is shown that certain technological modes of Si ion implantation enhance the adhesion, proliferation, and viability of endothelial cells. It is found that the Si-modified NiTi surface is capable of stimulating the formation of capillary-like structures in the cell culture.