THThorsten Hickmann

Thorsten Hickmann

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Thorsten Hickmann has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    ELECTRICALLY CONDUCTIVE FILMS - CHARACTERISATION OF WEIGHT-REDUCED POLYMER FILMS FOR USE IN A BIPOLAR LITHIUM-SULPHUR BATTERY

    by Martin Engelke, Thorsten Manfred Hickmann, Beate Krause

    With a theoretical energy density of around 2600 Wh kg-1 and a specific capacity of approx. 1675 mAh g-1, the lithium-sulphur battery (Li-S battery) is a promising technology for future energy storage solutions. Lithium-sulphur batteries currently achieve specific energy densities of between 400 and 600 Wh kg-1 in practical applications, making them an attractive alternative to lithium-ion batteries. Despite their advantages, technical challenges such as the dissolution of polysulphides in the electrolyte and the low cell voltage are significant obstacles to the commercialisation of this technology. In the "BiPoLiS" project (development of lithium-sulphur bipolar batteries), these challenges are addressed by combining lithium-sulphur battery technology with a previously undescribed bipolar structure. The focus of this article is on the development of weight-reduced polymer conductor foils, which should contribute to an improved battery packing density due to the planar layer structure - compared to single cells.Experimental investigations were carried out to develop an electrically conductive, flexible and weight-reduced film suitable for use in lithium-sulphur batteries. The investigations were based on compounds of styrene-ethylene-butylene-styrene (SEBS) and polypropylene (PP), whereby various mixing ratios were tested. The optimum mixture was found with a ratio of a SEBS compound to a PP compound of 30:70, which had an electrical in-plane conductivity of around 346 S m-1 and a through-plane conductivity of around 60 S m (-1). The flexible film was produced using a calendering process, whereby a thickness of approx. 0.2 mm was achieved.Thanks to the innovative combination of bipolar design and polysulphide-free sulphur cathode, the lithium-sulphur battery can offer significant advantages in terms of energy density and manufacturing costs. This technology could play a decisive role, particularly in the field of electromobility and industrial energy storage. Future work should focus on optimising the process parameters for reducing the film thickness and investigating the long-term stability in order to exploit the full potential of these new materials and enable their commercial applications.


  • Open Access

    Polypropylene Compounds for PEM-Electrolyzer Plates: Materials, Processing Methods, and Analysis of the Materials

    by Venkatesan Prassad, Thorsten Hickmann, Engelke Martin, Klemp Eric, Derieth Thorsten

    Titanium and graphite-filled composites together with a polymer, such as polypropylene, are a suitable material for bipolar plates in PEM electrolyser applications. Similar to pure titanium metals, titaninium and graphite composite plates have quite good properties when mixed with polypropylene (PP). The plates have relatively low electrical resistance and can withstand the aggressive electrochemical environment encountered in an electrolyser. The main challenges here are resistance to oxygen, hydrogen, and complete. The conditions in operation are extreme. Above all, the comparatively high voltage and the fact that pure water is used generally cause problems for the materials. Besides pure titanium, composite materials can also be used. This chapter summarizes the most important requirements for the titanium-PP composite material. This material is used for bipolar plates. This is the basis for the characterization methods of titanium-based bipolar plates. The modern PP-based composites and their general properties are described, with a focus on improved long-term stability. In this chapter, the material fillers such as titanium and graphitic powders are analysed. The last deals with the way the electrical conductivity of the materials is measured and with in situ operation.


  • Open Access

    EX-SITU-EVALUATION OF NEW MATERIALS SUCH AS COPPER COMPOUNDS FOR ZINC-AIR BATTERY WITH THE AIM OF GETTING A SECONDARY ZINC-AIR BATTERY

    by Vinod-Kumar Banoth, Martin Engelke, David Fuchs, Thorsten Hickmann, Falko Mahlendorf

    Zinc airflow batteries are popular for large-scale energy storage due to their high-volume density, environmental safety, and economic feasibility of production and recycling. There is going to be a lot of research in order to realize a zinc-air battery as a secondary battery. One potential option in order to overcome this challenge is to use other anode materials, which are stable in the alkaline medium. The main objective of this work is to present the most influencing factors for the production of copper compounds with thermoplastic as binder and graphite as a secondary filler material. In addition, copper compounds are evaluated based on chemical and electrical tests.

  • Open Access

    Key Components in the Redox-Flow Battery: Bipolar Plates and Gaskets – Different Materials and Processing Methods for Their Usage

    by Thorsten Hickmann, Toni Adamek, Oliver Zielinski, Thorsten Derieth

    Graphite filled thermoplastic based composites are an adequate material for bipolar plates in redox flow battery applications. Unlike metals, composite plates can provide excellent resistance to the highly aggressive chemical environment at elevated temperatures in combination with an electrochemical potential in battery operation. The chapter therefore gives an overview of the most important requirements for the graphite-plastic composite material and thus also for the bipolar plates, as well as the different characterization methods of the bipolar plates. In the following, both the modern composite materials based on polypropylene (PP) and polyvinylidene fluoride (PVDF) and their general properties are described with a focus on improved long-term stability. Furthermore, recycling is also considered. One section is dedicated to seals, which - as so often - are an underestimated component of redox flow batteries. In this gasket part of the chapter, the most common materials and interactions between gaskets and other stack components are presented, as well as the material properties, characterization and processing methods of the gaskets.


  • Open Access

    BIPOLAR PLATES FOR ELECTROLYZERS AND FUEL CELLS – HOW INNOVATION MANAGEMENT IS AS A BASIS FOR SUCCESS THESE COMPONENTS

    by Thorsten Hickmann

    An almost abrupt change in attitude towards applications in the field of renewable energies has emerged in recent months, both among decision-makers in politics and in companies. [1] In particular, the topic of hydrogen production by electrolysis plays an eminently important role. In water electrolysis, water is split into its constituent ¬parts hydrogen and oxygen using electrical energy. The resulting hydrogen is of interest to future energy systems for a number of reasons, including the fact that hydrogen can serve as a storage medium for electrical energy from renewable energy conversion systems such as photovoltaic or wind turbines.


  • Open Access

    Combination of magnetically actuated flexible graphite–polymer composite cathode and boron-doped diamond anode for electrochemical water softening or wastewater treatment

    by Thorben Muddemann, Dennis Haupt, Martin Engelke, Michael Sievers, Axel Fischer, Carmen Kiefer, Kristina Filip, Oliver Zielinski, Thorsten Hickmann, Ulrich Kunz


  • Open Access

    Nano material parts for medical analysis machine-applications

    by Hickmann Thorsten

    When it comes to application of specific material properties, high accuracy and minimal rework of nano-metal components are the key elements for a sucessful process. The parts can be either produced by Laser melting, or by metal injection moulding, depending on the volumes oft he desired applications.

  • Open Access

    Bipolar Plates: Different Materials and Processing Methods for Their Usage in Fuel Cells

    by T Hickmann, O Zielinski

    Graphite composites based bipolar plates are a preferred material for stationary PEM fuel cell applications, because they are resistant against high temperatures and corrosive conditions. This chapter gives an overview about different material configurations as well as the most important parameters and characterization methods for graphite based bipolar plates. It describes the actual generation PPS based composite materials with improved long-term stability. It introduces the most common materials and gives an overview about interactions between other stack components, characterization and processing, great care should be taken in constructing the bipolar plates.


  • Open Access

    Redox Flow Battery: System for test series with recycling material

    by T Hickmann, O Zielinski

    In this paper a system for experiments on redox flow batteries is presented, giving the operator the possibility of dealing independently with advantages and challenges of this innovative energy converter, in particular with regard to testing new, in this case recycled, materials. The recycling aspect is included due to the permanent requirement of reducing cost of especially as far as bipolar plates is concerned. In addition the hole recycling discussion, it is necessary to use the material recycling in different stages of system development and evaluation. Included in the tests was the development of a four-part series of experiments, in the framework of which the operators will treat intensely the cell structure, its characterization as well as testing of the electrolytes and the challenge of the crossover.

  • Open Access

    Investigation of Corrosion Methods for Bipolar Plates for High Temperature Polymer Electrolyte Membrane Fuel Cell Application

    by Nadine Pilinski, Claudia Käding, Anastasia Dushina, Thorsten Hickmann, Alexander Dyck, Peter Wagner

    In this work, different methods and electrochemical set-ups were investigated in order to study the corrosion behaviour of bipolar plates (BPP) for high temperature (HT) polymer electrolyte membrane fuel cell application. Using confocal and scanning electron microscopy, it was shown that chemical and electrochemical aging significantly increases surface roughness as well as morphology changes, confirming material degradation. Identical electrochemical corrosion behaviour was observed for both set-ups with typical quinone/hydroquinone peaks in the potential range ~0.6–0.7 V versus reversible hydrogen electrode (RHE). The appearance of the peaks and an increase of double layer capacitance can be related to the oxidation of carbon surface and, consequently, material corrosion. Simultaneously, an optimised corrosion set-up was introduced and verified regarding suitability. Both investigated set-ups and methods are useful to analyse the oxidation behaviour and corrosion resistance.