B. Mamatha
B. Mamatha has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
K. Ashok
Marri Laxman Reddy Institute of Technology and Management, Hyderabad, India
4 shared publications- Pasala Sarah
Research and Development Centre, Vardhaman College of Engineering, Hyderabad, Telangana, India
3 shared publications A. R. James
Physics Department, Defence Metallurgical Research Laboratory, Hyderabad, Telangana, India
2 shared publicationsP. Sarah
R & D Centre, Vardhaman College of Engineering, Hyderabad, Telangana, India
2 shared publicationsA R James
Defence Metallurgical Research Laboratory, Hyderabad, AP 500058, India
1 shared publicationG. Neeraja Rani
Geethanjali College of Engineering, Hyderabad, A.P., India, 501301
1 shared publication
Latest Publications
- 20 February 2024
- Published by Taylor & Francis in Ferroelectrics
- Vol. 618 (4) , 1006-1018
Impedance spectroscopy and conductivity studies of Sr(Bi 3.9-x Nd x La 0.1 )(Ti 3.975 Zr 0.025 )O 15 (x = 0.00, 0.025, 0.05, 0.075 and 0.1) ceramics
- 20 February 2024
- Published by Taylor & Francis in Ferroelectrics
- Vol. 618 (4) , 1006-1018
Impedance spectroscopy and conductivity studies of Sr(Bi 3.9-x Nd x La 0.1 )(Ti 3.975 Zr 0.025 )O 15 (x = 0.00, 0.025, 0.05, 0.075 and 0.1) ceramics
- 25 January 2023
- Published by Taylor & Francis in Ferroelectrics
- Vol. 603 (1) , 169-175
Structural and electrical properties of potassium and neodymium substituted SrBi4Ti4O15 ceramics
Sr1-2xKxNdxBi4Ti4O15 (x = 0.0 and 0.1) ceramics are synthesized by solid-state sintering method. The phase formation confirmation and structural parameters are obtained from X-ray diffraction analysis. The effect of potassium and Neodymium substitution on microstructure, dielectric and piezoelectric properties of ceramics are investigated. The Curie temperature is found to be decreased and the piezoelectric coefficient (d33), electromechanical coupling factor (kp) are found to be increased.
- 25 January 2023
- Published by Taylor & Francis in Ferroelectrics
- Vol. 603 (1) , 169-175
Structural and electrical properties of potassium and neodymium substituted SrBi4Ti4O15 ceramics
Sr1-2xKxNdxBi4Ti4O15 (x = 0.0 and 0.1) ceramics are synthesized by solid-state sintering method. The phase formation confirmation and structural parameters are obtained from X-ray diffraction analysis. The effect of potassium and Neodymium substitution on microstructure, dielectric and piezoelectric properties of ceramics are investigated. The Curie temperature is found to be decreased and the piezoelectric coefficient (d33), electromechanical coupling factor (kp) are found to be increased.
- 22 November 2021
- Published by Taylor & Francis in Integrated Ferroelectrics
- Vol. 221 (1) , 239-244
Dielectric and Piezoelectric Properties of Sr 1-2x Na x Sm x Bi 4 Ti 4 O 15 ( x = 0–0.4) Ceramics
Sr1-2xNaxSmxBi4Ti4O15 ceramics with x = 0-0.4 is synthesized through sol gel process. XRD patterns of the ceramics confirm single phase formation with orthorhombic structure. Lattice parameters are obtained from XRD and found to be decreased with increase of substitution. The dielectric and piezoelectric properties of ceramics are investigated. The piezoelectric activity of the ceramics enhanced with the substitution Na and Sm in A-site made these materials in actuator applications at high temperatures.
- 22 November 2021
- Published by Taylor & Francis in Integrated Ferroelectrics
- Vol. 221 (1) , 239-244
Dielectric and Piezoelectric Properties of Sr 1-2x Na x Sm x Bi 4 Ti 4 O 15 ( x = 0–0.4) Ceramics
Sr1-2xNaxSmxBi4Ti4O15 ceramics with x = 0-0.4 is synthesized through sol gel process. XRD patterns of the ceramics confirm single phase formation with orthorhombic structure. Lattice parameters are obtained from XRD and found to be decreased with increase of substitution. The dielectric and piezoelectric properties of ceramics are investigated. The piezoelectric activity of the ceramics enhanced with the substitution Na and Sm in A-site made these materials in actuator applications at high temperatures.
- 3 October 2021
- Published by Taylor & Francis in Ferroelectrics
- Vol. 582 (1) , 192-203
Effect of neodymium and zirconium substitution on electrical properties of SrBi4Ti4O15
Neodymium and zirconium modified strontium bismuth titanate ceramics with content changing from 2.5 to 10 at% Nd and a 2.5 at% Zr of SrBi4Ti4O15 (SrNdxBi4-xZryTi4-yO15, (x = 0.00, 0.025, 0.05, 0.075, and 0.1, y = 0.00 and 0.025) have been prepared by solid state reaction method and analyzed by X-ray diffraction (XRD), dielectric response, ferroelectric hysteresis, electromechanical coupling coefficient, and piezoelectric charge coefficient. From hysteresis loop, the remnant polarization and coercive field were calculated and explained. Dielectric analysis explained the sample behavior. Piezoelectric charge and electromechanical coupling coefficients were found to be increased with the addition of Zr and Nd.
- 3 October 2021
- Published by Taylor & Francis in Ferroelectrics
- Vol. 582 (1) , 192-203
Effect of neodymium and zirconium substitution on electrical properties of SrBi4Ti4O15
Neodymium and zirconium modified strontium bismuth titanate ceramics with content changing from 2.5 to 10 at% Nd and a 2.5 at% Zr of SrBi4Ti4O15 (SrNdxBi4-xZryTi4-yO15, (x = 0.00, 0.025, 0.05, 0.075, and 0.1, y = 0.00 and 0.025) have been prepared by solid state reaction method and analyzed by X-ray diffraction (XRD), dielectric response, ferroelectric hysteresis, electromechanical coupling coefficient, and piezoelectric charge coefficient. From hysteresis loop, the remnant polarization and coercive field were calculated and explained. Dielectric analysis explained the sample behavior. Piezoelectric charge and electromechanical coupling coefficients were found to be increased with the addition of Zr and Nd.
- 1 January 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1942 (1) , 120007
Enhanced electrical properties of SrBi4Ti4O15 ceramic with addition of ZrO2
Polycrystalline SrBi4Ti3.95Zr0.05O15 (SBZT) ceramic was prepared by solid-state double sintering method. It was characterized by X-Ray Diffraction (XRD) and Scanning Electron Micrograph (SEM). With the increased addition of ZrO2, the electrical properties as dielectric, ferroelectric and piezoelectric were studied. From XRD, single-phase formation with orthorhombic structure was identified by the increase of ZrO2. The remnant polarization (Pr) and dielectric constant was found to be increased with the increase of ZrO2. With the increase of ZrO2, Curie temperature (Tc) was found to be decreased. The planar electromechanical coupling coefficient (Kp = 0.57) and Piezoelectric coefficient (d33 = 18 pC/N) was found to be increased with the increase of ZrO2.
- 1 January 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1942 (1) , 120007
Enhanced electrical properties of SrBi4Ti4O15 ceramic with addition of ZrO2
Polycrystalline SrBi4Ti3.95Zr0.05O15 (SBZT) ceramic was prepared by solid-state double sintering method. It was characterized by X-Ray Diffraction (XRD) and Scanning Electron Micrograph (SEM). With the increased addition of ZrO2, the electrical properties as dielectric, ferroelectric and piezoelectric were studied. From XRD, single-phase formation with orthorhombic structure was identified by the increase of ZrO2. The remnant polarization (Pr) and dielectric constant was found to be increased with the increase of ZrO2. With the increase of ZrO2, Curie temperature (Tc) was found to be decreased. The planar electromechanical coupling coefficient (Kp = 0.57) and Piezoelectric coefficient (d33 = 18 pC/N) was found to be increased with the increase of ZrO2.
- 23 June 2015
- Published by Taylor & Francis in Ferroelectrics
- Vol. 482 (1) , 90-103
Synthesis, Characterization and Electrical Properties of La Modified SrBi4Ti3.975Zr0.025O15
Ceramic samples of composition Sr(Bi4-xLax)(Ti3.975Zr0.025)O15 (x = 0.025, 0.05 ,0.075 and 0.1) is prepared by solid-state method. It is characterized by X-ray diffraction (XRD), scanning electron micrograph (SEM) and energy dispersive spectra (EDS). From XRD and SEM analysis, single-phase formation is identified with orthorhombic structure and particle size is calculated. Compositions are confirmed from EDS. Electrical properties are studied by impedance spectroscopy and conductivity. From impedance, AC and DC conductivities are recorded in the temperature range room temperature (RT) – 600°C. From impedance data, various parameters like bulk resistance or grain resistance (Rb or Rg), bulk capacitance or grain capacitance (Cb or Cg), grain boundary resistance (Rgb), and grain boundary capacitance (Cgb) are determined. Grain and grain boundary relaxation times (τg, τgb) are also evaluated as a function of temperature. From AC and DC conductivity plots activation energies for conduction are obtained. Results obtained lead to improved understanding of conductivity of samples.
- 23 June 2015
- Published by Taylor & Francis in Ferroelectrics
- Vol. 482 (1) , 90-103
Synthesis, Characterization and Electrical Properties of La Modified SrBi4Ti3.975Zr0.025O15
Ceramic samples of composition Sr(Bi4-xLax)(Ti3.975Zr0.025)O15 (x = 0.025, 0.05 ,0.075 and 0.1) is prepared by solid-state method. It is characterized by X-ray diffraction (XRD), scanning electron micrograph (SEM) and energy dispersive spectra (EDS). From XRD and SEM analysis, single-phase formation is identified with orthorhombic structure and particle size is calculated. Compositions are confirmed from EDS. Electrical properties are studied by impedance spectroscopy and conductivity. From impedance, AC and DC conductivities are recorded in the temperature range room temperature (RT) – 600°C. From impedance data, various parameters like bulk resistance or grain resistance (Rb or Rg), bulk capacitance or grain capacitance (Cb or Cg), grain boundary resistance (Rgb), and grain boundary capacitance (Cgb) are determined. Grain and grain boundary relaxation times (τg, τgb) are also evaluated as a function of temperature. From AC and DC conductivity plots activation energies for conduction are obtained. Results obtained lead to improved understanding of conductivity of samples.
- 1 January 2013
- Published by Taylor & Francis in Ferroelectrics
- Vol. 445 (1) , 51-66
Frequency and Temperature Dependence of Electrical Properties of Zirconium and Neodymium Substituted SrBi4Ti4O15Ceramics
Polycrystalline ceramics SrNdxBi4-xZryTi4-yO15 (x = 0.00, 0.025, 0.05, 0.075, 0.1, y = 0.00, 0.025) were prepared by using the conventional solid-state reaction method. Orthorhombic structure with single phase was identified by X-ray diffractogram (XRD). Impedance, AC and DC conductivity studies were investigated in the frequency range, 1 Hz–1 MHz and temperature range from room temperature (RT) to 600°C. From impedance data, various parameters grain (bulk) resistance (Rg) and capacitance (Cg), grain boundary resistance (Rgb) and capacitance (Cgb) were determined. Grain and grain boundary relaxation times (τg, τgb), activation energies for relaxation and conduction were evaluated as a function of temperature.
- 1 January 2013
- Published by Taylor & Francis in Ferroelectrics
- Vol. 445 (1) , 51-66
Frequency and Temperature Dependence of Electrical Properties of Zirconium and Neodymium Substituted SrBi4Ti4O15Ceramics
Polycrystalline ceramics SrNdxBi4-xZryTi4-yO15 (x = 0.00, 0.025, 0.05, 0.075, 0.1, y = 0.00, 0.025) were prepared by using the conventional solid-state reaction method. Orthorhombic structure with single phase was identified by X-ray diffractogram (XRD). Impedance, AC and DC conductivity studies were investigated in the frequency range, 1 Hz–1 MHz and temperature range from room temperature (RT) to 600°C. From impedance data, various parameters grain (bulk) resistance (Rg) and capacitance (Cg), grain boundary resistance (Rgb) and capacitance (Cgb) were determined. Grain and grain boundary relaxation times (τg, τgb), activation energies for relaxation and conduction were evaluated as a function of temperature.
- 1 November 2011
- Published by IOP Publishing in Physica Scripta
- Vol. 84 (5) , 055704
Synthesis and electrical properties of SrBi4Ti4O15piezoelectric ceramics
- 1 November 2011
- Published by IOP Publishing in Physica Scripta
- Vol. 84 (5) , 055704
Synthesis and electrical properties of SrBi4Ti4O15piezoelectric ceramics
- 1 January 2011
- Published by Taylor & Francis in Ferroelectrics
- Vol. 413 (1) , 115-122
Electromechanical Properties of A-Site (LiHo)-Modified Strontium Bismuth Titanate (SrBi 4 Ti 4 O 15 ) Piezoelectric Ceramics
The Aurivillius-type bismuth layer-structure Sr0.84(LiHo)0.08Bi4Ti4O15 (SBT-LiHo) piezoelectric ceramics were synthesized using conventional solid state processing. Phase analysis was performed by X-ray diffraction (XRD). The dielectric, piezoelectric, ferroelectric, and electromechanical properties of SBT-LiHo ceramics were investigated. The piezoelectric activities were found to be significantly enhanced compared to SrBi4Ti4O15 (SBT) ceramics, which can be attributed to the lattice distortion and the presence of bismuth vacancies. The dielectric properties of SBT-LiHo ceramics at elevated temperatures were investigated in detail.
- 1 January 2011
- Published by Taylor & Francis in Ferroelectrics
- Vol. 413 (1) , 115-122
Electromechanical Properties of A-Site (LiHo)-Modified Strontium Bismuth Titanate (SrBi 4 Ti 4 O 15 ) Piezoelectric Ceramics
The Aurivillius-type bismuth layer-structure Sr0.84(LiHo)0.08Bi4Ti4O15 (SBT-LiHo) piezoelectric ceramics were synthesized using conventional solid state processing. Phase analysis was performed by X-ray diffraction (XRD). The dielectric, piezoelectric, ferroelectric, and electromechanical properties of SBT-LiHo ceramics were investigated. The piezoelectric activities were found to be significantly enhanced compared to SrBi4Ti4O15 (SBT) ceramics, which can be attributed to the lattice distortion and the presence of bismuth vacancies. The dielectric properties of SBT-LiHo ceramics at elevated temperatures were investigated in detail.