NGNan Gao

Nan Gao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nan Gao has a total of 59 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Turbulence enhancement with a fan array wind generator using geometrically textured actuation and particle swarm optimization

    by Gengshou Cao, Tamir Shaqarin, Zhutao Jiang, Yutong Liu, Yiqing Li, Xinhu Ye, Hongli Zhuang, Chuntai Zheng, Franz Raps, Tianxiang Zhang, et al.

    Fan array wind generators (FAWG) are designed to generate a rich set of turbulent flows reminiscent of those found in natural environments. In this study, we experimentally investigate a square FAWG consisting of 10 × 10 individually controllable fans with 4 cm width and a maximum velocity of 17 m/s. The goal is to maximize the turbulence intensity in the test region. Two approaches for fan operation are investigated: first, geometric texturing of the duty cycle distribution, and second, maximization of the turbulence intensity at selected hot-wire sensors with particle-swarm optimization (PSO). We find that geometric texturing, specifically a checkerboard pattern of active fans, yields a nearly uniform turbulence field driven by jet interactions with turbulence levels around 0.14. However, particle swarm optimization doubles this local turbulence level yielding 0.28 at the chosen sensor locations but sacrifices performance elsewhere. A physical analysis reveals that particle swarm location places the sensors in the shear-layer between active and inactive regions while geometric texturing exploits the large fluctuation at the end of the potential core of the active patches. This region marks the maximum achievable turbulence level. The proposed physical interpretation of texture-based turbulence enhancement is corroborated with a square 40 × 40 fan array wind generator (Guinness World Record 2025) with a width of 3.25 m. Texture-based turbulence control opens a promising avenue to simultaneously command the mean velocity profile and the turbulence level field of a sufficiently large fan array wind generator.


  • Visualizations and fluctuation measurements of the spanwise unsteady motions over a backward-facing step under periodic perturbations

    by Zhuoyue Li, Di Zhang, Yakun Liu, Nan Gao

    The spanwise unsteady characteristics induced by the development of large-scale vortex structures along the shear layer over a backward-facing step with Re=9630 was investigated. The flow was perturbed periodically using a synthetic jet at separation. Structures were visualized from top and side views using a smoke-wire, while the induced velocity fluctuations were measured with a movable spanwise hot-wire sensor array. Comparisons were made for perturbation frequency varying from StA=fAH/Uo=0.04 to 0.39, and StA=0.22 was found to be the optimal frequency, as forming spanwise heterogeneous three-dimensional shedding structures with the maximum turbulent kinetic energy. In optimal cases, structures were paired in a staggered span-wise order, causing a doubling period. Structures became smaller and showed weaker interactions under superoptimal perturbation, while a large-scale two-dimensional low-speed bubble was observed at suboptimal perturbation, StA=0.04.

  • Drone anemometry of atmospheric winds—A review

    by Muhammad Ilyas, Bernd R. Noack, Gang Hu, Hao Xiong, Nan Gao, Awais Khan, Yang Yang

    The low altitude economy presents new opportunities for urban mobility with drones and air taxis offering solutions to traffic congestion and access to hard-to-reach areas. These opportunities come with the same challenges as in civil aviation: the atmospheric boundary layer (ABL) gives rise to wind gusts and turbulence, leading to sudden displacements of the low-altitude vehicles from the planned trajectory. Hence, a reliable estimation and prediction of wind conditions is paramount to safe drone and air taxi operations. Drones offer an attractive alternative to expensive stationary platforms for wind monitoring in the lower ABL. This article reviews the status, challenges, opportunities, and alternatives to drone-based wind anemometry. Aspects include the wind measurement and estimation of urban terrain, performance metrics of anemometers, model-based wind speed measurement, and machine learning algorithms for atmospheric wind prediction. Already the attitude of the hovering and cruising drones allows to infer the wind velocity. The accuracy of drone wind measurement may be further augmented with various anemometers such as ultrasonic, thermal, hot wire, and pitot tubes. This article exemplifies the potential of drone anemometry for urban wind prediction, for measuring wind profiles in remote areas of wind turbines as well as a tool for boundary layer meteorology and assessment of gusts in harsh weather conditions.


  • Smart skin separation control with micro-macro machine learning feedback

    by Zhutao Jiang, Guy Y. Cornejo Maceda, Tianyu Wang, Nan Gao, Bernd R. Noack

    We introduce a novel distributed control technology sensing and manipulating separation where it is most effective. This control architecture, termed “Smart Skin” in the sequel, comprises an array of control modules and a robust self-learning feedback algorithm. The control modules host an adjustable, fully retractable V-shaped vortex generator (VG), an in-time commandable streamwise jet actuator and pressure sensors. The self-learning feedback algorithm is based on a physics-informed distributed-input distributed-output structure. Each control module listens to local (micro) and global (macro) sensing signals and command the VG adaptively and the jet actuators in time. These physics-informed feedback laws are optimized with gradient-enriched Machine Learning Control (MLC) and termed micro-macro (m2) MLC in the sequel. The Smart Skin separation control is experimentally demonstrated for the backward-facing ramp with 30 multi-modal actuators and 42 pressure sensors at a Reynolds number of 32 000 based on height. m2MLC achieves a 125% increase in base pressure compared to the unforced case. Particle image velocimetry measurements show a fully attached flow by actuation. We expect numerous applications of smart-skin separation control on smooth surfaces, for instance, on helicopter and air taxi nacelles, on wings near the stall conditions, and inside diffusers.


  • Aerodynamic characterization of a wind generator with 40 × 40 individually controllable fans

    by Yutong Liu, Bernd R. Noack, Gang Hu, Jialong Chen, Nan Gao, Franz Raps

    This study presents an aerodynamic characterization of a fan-array wind generator (FAWG) operating at Reynolds number of 2.8×106 in a large room. The performance of unmanned aerial vehicles needs to be tested for a wide range of spatiotemporal wind conditions. For this purpose, we have built a FAWG with 40 × 40 individually controllable fans, covering a wind section of 3.25 m × 3.25 m with speeds up to 13 m/s. This wind section is monitored with an equidistant 8 × 8 pitot tube array and a hot-wire anemometer for different levels of uniform blowing. The flow has a nearly uniform core region, which shrinks similar to the potential core of a jet. Similar observations have been presented for a small FAWG [Li et al., “Aerodynamic characterization of a fan-array wind generator,” AIAA J. 62(1), 291–301 (2024)]. The wind velocity in the flow direction is observed to increase linearly with the duty cycle of the pulse width modulation signal employed to command the fan rotation speed. We demonstrate one key advantage of FAWG: it can modulate the wind velocity within 2 s.


  • Study on coherent structures in the flow field of single-cell and vortex breakdown tornado-like vortices

    by Dong Zhang, Zhuoyue Li, Di Zhang, Nao Gao, Yakun Liu

    The coherent structures at different height planes within a vortex-breakdown tornado-like flow field are investigated using particle image velocimetry. Proper orthogonal decomposition (POD) of the experimental velocity field reveals that, in the flow field of tornadoes with vortex breakdown, the vortex is a single-cell structure at high altitude, and the main large-scale coherent structure is vortex wandering. At lower altitude, in the plane where vortex breakdown occurs, the coherent motion of vortex size variations intensifies significantly. The mechanisms whereby large-scale coherent motions (vortex wandering and vortex size variations) influence the fluctuating velocity and Reynolds stresses in the vortex flow field within different vortex structures are determined through the low-order reconstruction of modes and analysis of modal stresses. An investigation of numerically synthesized vortex POD modes explains the origins of POD spatial modes for vortex wandering and vortex size variations in single-vortex and vortex-breakdown tornado-like flow fields. Furthermore, by identifying fewer modes in the velocity fields simulated by Burgers' theoretical model, a simplified model capable of representing the fluctuating velocity in single-vortex tornado flow fields is constructed and found to be in good agreement with experimental results.


  • Jet mixing optimization using a flexible nozzle, distributed actuators, and machine learning

    by Zhutao Jiang, Guy Y. Cornejo Maceda, Yiqing Li, Tamir Shaqarin, Nan Gao, Bernd R. Noack

    In this paper, we introduce the first jet nozzle allowing simultaneous shape variation and distributed active control, termed “Smart Nozzle” in the sequel. Our Smart Nozzle manipulates the jet with an adjustable flexible shape via 12 equidistant stepper motors and 12 equidistantly placed inward-pointing minijets. The mixing performance is evaluated with a 7 × 7 array of Pitot tubes at the end of the potential core. The experimental investigation is carried out in three steps. First, we perform an aerodynamic characterization of the unforced round jet flow. Second, we investigate the mixing performance under five representative nozzle geometries, including round, elliptical, triangular, squared, and hexagonal shapes. The greatest mixing area is achieved with the square shape. Third, the symmetric forcing parameters are optimized for each specified nozzle shape with a machine learning algorithm. The best mixing enhancement for a symmetric active control is obtained by the squared shape, which results in a 1.93-fold mixing area increase as compared to the unforced case. Symmetrically unconstrained forcing achieves a nearly 4.5-fold mixing area increase. The Smart Nozzle demonstrates the feasibility of novel flow control techniques that combine shape variation and active control, leveraging the capabilities of machine learning optimization algorithms.


  • Coarse-graining characterization of the room flow circulations due to a fan-array wind generator

    by Xin Wang, Guy Y. Cornejo Maceda, Yutong Liu, Gang Hu, Nan Gao, Franz Raps, Bernd R. Noack

    Fan-array wind generators (FAWGs) are being employed for unmanned aerial vehicle testing. Such testing requires uniform blowing generated from the FAWGs. However, achieving uniform blowing is impeded by the wall effects within the enclosed room. These wall effects also lead to complex flow circulations. Understanding the room flow circulations can provide insight into restoring the uniformity of FAWG blowing. In this study, a coarse-graining characterization methodology is proposed to extract the room flow circulations. The key enabler is discretizing the flow domain into regular boxes as coarse-grained units and reducing the continuous flow field to flow transfers among the units. The flow circulation structure is characterized by kinematic features, i.e., the flow loop paths. The methodology is demonstrated on a numerical simulation of the room flow generated by the world's largest FAWG in the Shenzhen unmanned aerial vehicle test center. First, an analysis of the room flow kinematics shows a deflection and velocity decay of the jet-like flow. Second, two- and three-dimensional kinematic feature identifications indicate that horizontal circulations dominate the room flow. Third, two triangular prisms are introduced to manipulate the whole room circulations to improve the flow characteristics in the drone testing region. The right-angle prism reduces the flow deflection and enhances the flow activity in the test region by orienting flow circulations from horizontal to vertical. Meanwhile, the acute-angle prism creates complex flow circulations. The proposed methodology facilitates the identification and improvement of kinematic features and contributes to the physical understanding of a flow circulation structure in complex configurations.


  • Open Access

    On the unsteady wake flow behind a sphere with large transverse-rotating speeds

    by Zhuoyue Li, Di Zhang, Yakun Liu, Aliasghar Azma, Nan Gao

    The unsteady wake downstream of a spinning sphere with a Reynolds number of 7930 (Re=UoD/ν, based on the sphere diameter and the free-stream velocity) and a range of spinning ratios (the ratio between the surface velocity and free-stream velocity, α=Vs/Uo) from 0 to 6.0 were studied using time-resolved particle image velocimetry. The Reynolds stresses and proper orthogonal decomposition results indicated that the wake exhibited distinct features in different spinning ratio regimes, and the state of the boundary layer played an important role in forming these features. In regime I (α≤0.25) where the boundary layer around the sphere was laminar, a pair of counter-rotating vortices emerged in the wake with unsteady size and position. The bottom boundary layer transitioned from laminar to turbulent as α increased from 0.25 to 0.75 (regime II). The transition caused a significant increase in the stream-wise stress as the unsteadiness becomes more coherent. The sphere was gradually covered by the turbulent boundary layer as α increased in regimes III and IV (0.75<α≤3.0). A large separation bubble was created in cases with α>3.0 (regime V); flow structures with a large stream-wise momentum separated from the bubble and was shed downstream with a strong flapping motion in the vertical direction, leading to large vertical stress behind the sphere.


  • Time-averaged flow field behind a transversely spinning sphere: An experimental study

    by Zhuoyue Li, Di Zhang, Yakun Liu, Nan Gao

    The aerodynamic forces on a sphere with a rough surface were measured in a water tunnel at a Reynolds number of 7930 and for a range of spinning ratios ($\alpha$) from 0 to 6.0. The time-averaged flow fields were also measured using Particle Image Velocimetry (PIV). The effect of the spinning ratio $\alpha$ on the flow was found to show distinct trends in different regimes, including $\alpha\leq 0.25$; $0.25<\alpha\leq 0.75$; $0.75<\alpha\leq 2.0$; $2.0<\alpha\leq 3.0$ and $3.0<\alpha\leq 6.0$. The study identified two critical spinning ratios where the flow underwent significant changes. The first change occurred in regime II, where the boundary layer over one side of the sphere transitioned from laminar to turbulent, leading to a significant modification in the lift force on the sphere. The second significant change took place across regimes II and III, where the boundary flow in the vicinity of the entire sphere became turbulent. Beyond this range, with $\alpha\geq 3.0$, the high spinning rate disturbed the incoming flow, resulting in less-efficient downwash production. The lift increased with $\alpha$ at a slower rate compared to other regimes, and the less-efficient downwash production caused a decrease in drag as more momentum was directed downstream in the horizontal direction.