Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Weijun He has a total of 50 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Review of Research Progress on Automotive Magnesium Alloy Wheels

    by Meng Li, Xing Zhou, Xingmeng Zhang, Lichao An, Weijun He, Zhuang Cui, Qiu Ma, Bin Jiang

    Driven by the automotive industry’s strategies for energy conservation, emission reduction, and lightweighting, magnesium alloy wheels have emerged as a key focus of research and industrialization efforts, owing to their high specific strength, excellent vibration-damping properties, and superior heat dissipation performance. This paper provides a systematic review of the performance advantages, material systems, forming processes, applications, and industrialization challenges of magnesium alloy automotive wheels. The core advantages of magnesium alloy wheels in terms of weight reduction, vibration damping, and thermal management are elaborated. The compositional characteristics, suitable processes, and performance differences between cast magnesium alloys (e.g., AZ91D, AM60B) and wrought magnesium alloys (e.g., AZ80, ZK61-Y) are outlined. The technical characteristics, microstructural and property evolution, and limitations of casting processes (gravity, high-pressure, low-pressure, and semi-solid casting), plastic forming processes (isothermal extrusion forging, backward extrusion forging, and spin forming), and hybrid processes are discussed. Combined with the case studies of magnesium alloy wheel applications in the automotive sector, this paper analyzes the core bottlenecks of magnesium alloy wheels in terms of corrosion resistance, production cost, and industrial consistency, and outlines future research directions. This paper aims to provide theoretical references and technical support for the design, manufacturing, and large-scale application of lightweight, high-performance magnesium alloy wheels.

  • Open Access

    Effect of the interface diffusion precipitation behavior on mechanical properties of AZ31/Mg-3Y composite

    by Yuhe Tian, Yang Feng, Weijun He, Bin Jiang

    In this work, the AZ31/Mg-3Y laminated composite was fabricated by rolling, and the mechanical properties and the interface diffusion precipitation behavior of the composite were investigated. The results show that the AZ31/Mg-3Y laminated composite exhibits excellent mechanical properties compared to individual AZ31 and Mg-3Y alloys. After annealed at 300 oC for 20 min, both YS (221.4 MPa) and UTS (264.6 MPa) are higher than that of individual AZ31 and Mg-3Y, and the composite always presents higher elongation than individual AZ31 and Mg-3Y alloy, no matter how annealing temperature is. The strain distribution illustrated that the AZ31/Mg-3Y composite exhibits excellent resistance to strain localization. Additionally, due to the non-uniform deformation of each layer during the deformation process, significant heterogeneous deformation strengthening occurs. This endows the composite with excellent tensile properties. In the AZ31/Mg-3Y composite, Al can diffuse into the Mg-3Y layer to form Al-Y precipitates, and the morphologies of the precipitates are related to residual dislocation in the Mg-3Y layer. The high density of dislocations provides nucleation sites for the precipitates, promoting the formation of fine particle precipitates.

  • Open Access

    Structural Characterization, Bonding Performance, and Residual Stress Analysis of TA15/WC-20Co Composite Tubes with V/Fe Composite intermediate layers

    by Yuhe Tian, Kaixiang Sheng, Yifan Liu, Shunjie Jia, Weijun He, Bin Jiang

    The wear resistance of TA15 titanium alloy can be significantly improved by the fabrication of TA15/WC-20Co composite tubes, showing promising application potential in aviation, transportation, and defense industries. However, the formation of brittle intermetallic compounds between TA15 and WC-20Co, coupled with their significant thermal expansion coefficient differences, poses challenges to enhancing interface bonding performance. In this work, the interface microstructure and interfacial bonding performance of TA15/WC-20Co composite tube with interlayer of V and Fe foils were studied. In addition, experimental characterization based on digital image correlation (DIC) and numerical simulation were carried out to investigate the residual stress in the TA15/WC-20Co composite tube. Results indicate that local shear strength decreases from top to bottom, with a maximum value of 294.5 MPa, while annular shear strength remains relatively uniform along the tube length, peaking at 230.5 MPa. Shear failure occurs at the V/Fe interface due to the presence of brittle V2C and V6C5 phases. The absolute value of the residual stress in the TA15 layer decreases radially outward. During the diffusion bonding stage (DBS), TA15 is subjected to granular medium loading, resulting in compressive principal stress dominated by S33 (σθ). In the cooling stage (CS), thermal contraction maintains compressive principal stress, mainly S11 (σR). Along the tube height during DBS, all stress components exhibit minimum absolute values in the mid-section. At CS, only S22 (σZ) shows the lowest magnitude in the middle region. The post-cooling compressive stress contributes to enhanced interfacial bonding strength. This study provides a theoretical basis for the fabrication and residual stress testing for TA15/WC-20Co composite tube.

  • Open Access

    Revealing the contribution of crystallographic orientation heterostructure on the excellent ductility of a magnesium alloy

    by Xueting Li, Wenhuan Chen, Shengwen Bai, Jiangfeng Song, Weijun He, Bin Jiang

    Magnesium alloys are promising candidates for lightweight applications due to their low density and high specific strength, but their room-temperature formability is limited by low ductility, a consequence of the hexagonal close-packed (HCP) crystal structure. Traditional approaches to improve ductility through basal texture weakening often lead to a significant strength reduction, highlighting a persistent strength-ductility trade-off. Furthermore, whether such ductility enhancement stems solely from a favorable orientation for basal slip remains debated. Recent advances suggest that constructing heterostructures may enable synergistic improvement of strength and ductility. In this study, a crystallographic orientation heterostructure was fabricated in an AZ31 magnesium alloy via a compression-annealing process coupled with tailored tensile loading directions, achieving a high elongation of ~32%. An innovative "mechanical-reassembly-testing" methodology is introduced to decouple the individual contributions of crystallographic orientation changes and the heterostructure effect. Results demonstrate that the crystallographic orientation heterostructure plays a dominant role in enhancing ductility. The underlying mechanisms of the ductility improvement were elucidated through quasi-in-situ slip trace analysis, high-resolution digital image correlation (DIC) and full-field crystal plasticity simulations. It is revealed that deformation incompatibility between grains of differing orientations promotes the activation of non-basal slip systems, thereby improving ductility. This work demonstrates that constructing crystallographic orientation heterostructures can significantly enhance ductility without compromising strength, offering a novel pathway to overcome the strength-ductility trade-off in magnesium alloys. These findings advance the fundamental understanding of plastic deformation in HCP metals and provide a theoretical basis for designing high-performance magnesium alloys.

  • Open Access

    Structural Characterization, Bonding Performance, and Residual Stress Analysis of TA15/WC-20Co Composite Tubes with V/Fe Composite intermediate layers

    by Yuhe Tian, Weijun He, Kaixiang Sheng, Yifan Liu, Shunjie Jia, Bin Jiang

    The wear resistance of TA15 titanium alloy can be significantly improved by the fabrication of TA15/WC-20Co composite tubes, showing promising application potential in aviation, transportation, and defense industries. However, the formation of brittle intermetallic compounds between TA15 and WC-20Co, coupled with their significant thermal expansion coefficient differences, poses challenges to enhancing interface bonding performance. In this work, the interface microstructure and interfacial bonding performance of TA15/WC-20Co composite tube with interlayer of V and Fe foils were studied. In addition, experimental characterization based on digital image correlation (DIC) and numerical simulation were carried out to investigate the residual stress in the TA15/WC-20Co composite tube. Results indicate that local shear strength decreases from top to bottom, with a maximum value of 294.5 MPa, while annular shear strength remains relatively uniform along the tube length, peaking at 230.5 MPa. Shear failure occurs at the V/Fe interface due to the presence of brittle V₂C and V₆C₅ phases. The absolute value of the residual stress in the TA15 layer decreases radially outward. During the diffusion bonding stage (DBS), TA15 is subjected to granular medium loading, resulting in compressive principal stress dominated by S33 (σθ). In the cooling stage (CS), thermal contraction maintains compressive principal stress, mainly S11 (σR). Along the tube height during DBS, all stress components exhibit minimum absolute values in the mid-section. At CS, only S22 (σZ) shows the lowest magnitude in the middle region.

  • Improving the Ductility of Electron Beam Welded Joint between Additive Manufactured and Forged Ti‐6Al‐4V Alloys through Heat Treatment

    by Xinyu Liu, Yuhe Tian, Weijun He, Bin Jiang

    Laser melting deposition fabricated Ti‐6Al‐4V (TC4‐LMD) demonstrates exceptional mechanical properties and has been widely adopted in aerospace applications. However, the dimensional constraints of additive manufacturing equipment necessitate welding of TC4‐LMD components with other parts fabricated via conventional processes (e.g., forging). Significant microstructural and mechanical property gradients across distinct zones of a dissimilar welded joint frequently lead to poor overall mechanical performance. This study investigates the microstructural characteristics and mechanical behavior of electron beam welded joints between TC4‐LMD and forged damage tolerance TC4 (TC4‐DT). Digital image correlation (DIC) analysis is employed to elucidate localized strain distribution patterns during tensile deformation of the joint. Postwelding solution‐aging heat treatments with varying solution temperatures and cooling rates are used to tailor the properties of the joint. Results indicate that pronounced heterogeneous microstructures are formed in the initial joint, which substantially deteriorates the tensile properties, particularly ductility. Through solution heat treatment at 950 °C followed by air cooling and aging, the heterogeneous microstructure has been largely eliminated. Furthermore, fine β‐transformed structures are precipitated during the postwelding heat treatment, which also contribute to enhancing the strength‐ductility synergy.

  • Pre-twins in Zr702 alloy enhance corrosion resistance in chloride and sulfuric acid electrolytes and strength

    by Xin Chen, Zhiheng Zhang, Sandrine Zanna, Antoine Seyeux, Frederic Wiame, Weijun He, Philippe Marcus, Jolanta Światowska


  • Effect of Diffusion Bonding Temperature on the Microstructure and Interfacial Shear Strength of TA15/Cemented Carbide Composite Plate with V/Fe Composite Intermediate Layers

    by Yuhe Tian, Junjie Li, Weijun He, Shengwen Bai, Jun Peng, Bin Jiang

    The preparation of titanium alloy/cemented carbide bimetallic laminated composites is expected to integrate the high strength and toughness of titanium alloy with the wear resistance of cemented carbide, presenting significant application potential in national defense and other fields. A key requirement for the application of lamellar composite materials is stable and effective interface bonding properties. Adding an intermediate transition layer is an effective method for achieving high interface bonding strength. In this study, V/Fe composite intermediate layers is chosen as the intermediate layer between TA15 and tungsten–cobalt carbide. The effects of diffusion bonding temperatures and the Co content in the cemented carbide on the interface structure and interface shear strength are investigated. The results show that the V/Fe interlayer effectively facilitates the metallurgical bonding of TA15 and cemented carbide. The interface bonding strength can reach 166 MPa. As the bonding temperature increases, the interface bond strength of TA15/cemented carbide composite plates first increases and then decreases, peaking at 940 °C. At this temperature, the interfacial shear strength rises with increasing Co content. This study provides a theoretical foundation for preparing titanium alloy/cemented carbide laminated composite plates with good interface bonding properties.