Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Alexander Braun has a total of 479 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Motion Sensitivity Analysis and Terrain Correction for UAV‐Borne Gamma‐Ray Spectrometry

    by Neeraj Nainwal, Alexander Braun, Marshall MacNabb

    Uncrewed aerial vehicles (UAVs) equipped with gamma‐ray spectrometry sensors enable high‐resolution surveys but face challenges in rugged terrain. Conventional airborne gamma‐ray processing commonly approximates the source–detector geometry using a single height‐above‐ground parameter. This approximation is often unsuitable for low‐altitude UAV surveys, where rapid topographic changes, variable flight altitude, and platform motion can influence the measured response. This study first evaluates platform motion using a moving point‐spread function sensitivity analysis to quantify footprint elongation associated with survey speed, integration time, and flight altitude. A three‐dimensional, grid‐based terrain‐response model is then developed to account for variations in source–detector distance, terrain geometry, and line‐of‐sight visibility. Controlled synthetic simulations are used to evaluate the model under known terrain and source configurations. The motion analysis shows that footprint elongation is small under typical survey conditions but increases with higher survey speed, longer integration time, and lower flight altitude. The synthetic simulations further show how terrain geometry changes the measured response and demonstrate that the terrain‐response model recovers the known source distribution. When applied to UAV radiometric data collected over a rugged porphyry copper–molybdenum deposit in Arizona, USA, terrain‐correction magnitudes reached approximately 15% in areas of pronounced topographic relief. The largest adjustments occurred on slopes, ridges, and in topographic depressions, indicating that terrain effects were the primary source of geometric variation under the conditions examined. The proposed workflow provides a practical approach for identifying and correcting geometric effects in low‐altitude UAV gamma‐ray surveys over complex terrain.

  • Open Access

    HySIMU: An Open-Source Toolkit for Hyperspectral Remote Sensing Forward Modelling

    by Fadhli Atarita, Alexander Braun

    Hyperspectral remote sensing (HRS) is gaining widespread adoption within the geoscience and Earth observation communities. It fosters diverse applications, including precision agriculture, soil science, mineral exploration, and carbon detection, to name a few. Recent technological advancements facilitated a growing number of satellite missions as well as an increase in the availability of commercial sensors and platforms, such as drones. A significant challenge in deploying the varied platforms and sensors is the design and optimization of the hyperspectral surveys. Forward modelling simulators are valuable for optimizing mission parameters and estimating imaging performance. Limited accessibility of open-source simulators presents an obstacle for users who seek to benefit from such tools. To bridge this gap, HySIMU (Hyperspectral SIMUlator) was developed and described herein. It is an open-source, forward modelling toolkit that combines and integrates a primary processing pipeline with various open-source packages into a transparent and modular workflow. It offers a cost-effective approach to evaluating the performance of hyperspectral surveys. HySIMU is designed to simulate hyperspectral imagery based on user-defined targets, platforms, and sensor parameters. Features include (i) a ground truth data cube builder for customizable input parameters, (ii) a terrain-based solar and view geometry calculator for illumination modelling, (iii) integrated open-source radiative transfer models for incorporating atmospheric effects, and (iv) spatial resampling filters. In this manuscript, the initial framework for HySIMU is presented with some example applications, including two validation studies with real hyperspectral images. As remote sensing technologies advance, forward modelling toolkits such as HySIMU play a crucial role in refining mission designs and assessing survey feasibility. The scalability for arbitrary hyperspectral sensors, platforms, and spectral libraries ensures broad applicability. Of particular importance is support for parameter optimization for both scientific and commercial HRS campaigns.


  • Open Access

    Natural Disaster Information System (NDIS) for RPAS Mission Planning

    by Robiah Al Wardah, Alexander Braun

    Today’s rapidly increasing number and performance of Remotely Piloted Aircraft Systems (RPASs) and sensors allows for an innovative approach in monitoring, mitigating, and responding to natural disasters and risks. At present, there are 100s of different RPAS platforms and smaller and more affordable payload sensors. As natural disasters pose ever increasing risks to society and the environment, it is imperative that these RPASs are utilized effectively. In order to exploit these advances, this study presents the development and validation of a Natural Disaster Information System (NDIS), a geospatial decision-support framework for RPAS-based natural hazard missions. The system integrates a global geohazard database with specifications of geophysical sensors and RPAS platforms to automate mission planning in a generalized form. NDIS v1.0 uses decision tree algorithms to select suitable sensors and platforms based on hazard type, distance to infrastructure, and survey feasibility. NDIS v2.0 introduces a Random Forest method and a Critical Path Method (CPM) to further optimize task sequencing and mission timing. The latest version, NDIS v3.8.3, implements a staggered decision workflow that sequentially maps hazard type and disaster stage to appropriate survey methods, sensor payloads, and compatible RPAS using rule-based and threshold-based filtering. RPAS selection considers payload capacity and range thresholds, adjusted dynamically by proximity, and ranks candidate platforms using hazard- and sensor-specific endurance criteria. The system is implemented using ArcGIS Pro 3.4.0, ArcGIS Experience Builder (2025 cloud release), and Azure Web App Services (Python 3.10 runtime). NDIS supports both batch processing and interactive real-time queries through a web-based user interface. Additional features include a statistical overview dashboard to help users interpret dataset distribution, and a crowdsourced input module that enables community-contributed hazard data via ArcGIS Survey123. NDIS is presented and validated in, for example, applications related to volcanic hazards in Indonesia. These capabilities make NDIS a scalable, adaptable, and operationally meaningful tool for multi-hazard monitoring and remote sensing mission planning.


  • Performance of a modified YOLOv3 object detector on remotely piloted aircraft system acquired full motion video

    by Fouad Faraj, Alexander Braun, Andrew Stewart, Huiwen You, Anne Webster, Andrew Macdonald, Leigh Martin-Boyd

    Remotely piloted aircraft systems (RPAS) have introduced a new ability to quickly deploy low-cost, fully or partially autonomous aerial sensor platforms, which has created new intelligence, surveillance, and reconnaissance capabilities in various domains using cameras that are ubiquitous in most RPAS. The mounted cameras acquire images or full-motion video (FMV) which can be analyzed using object detection algorithms for locating and classifying one or more specified targets. To date, there has not been much published work regarding the effect of the RPAS flight parameters on the performance of object detection algorithms. To explore the use of object detection on aerial FMV acquired at various RPAS flight parameter settings, a dataset acquisition campaign was launched resulting in 8.5 h of RPAS-acquired FMV. Analysis and interpretation of the acquired dataset revealed that state-of-the-art performance was achieved using a modified you only look once object detection algorithm when the RPAS was deployed under an altitude of 30 m, at a velocity of under 7 m/s, and at pitch angles ranging from 25 deg to 65 deg while acquiring FMV at a resolution of 4.16 MP. The experimental results show that, when flown under specific conditions, RPAS are an effective and reliable platform for acquiring aerial FMV for the purpose of object detection which has a variety of different applications, such as peace support, public safety, and aerial monitoring.


  • Open Access

    Augmenting geological field mapping with real-time, 3-D digital outcrop scanning and modeling

    by Callum Walter, Fouad Faraj, Georgia Fotopoulos, Alexander Braun

    Hand scanners are compact, lightweight, and capable of generating 3-D digital models. Although they do not compare to conventional methods (terrestrial laser scanning and photogrammetry) in terms of coverage, resolution, and accuracy, they offer increased mobility, speed, and real-time processing capabilities in the field. This study investigates the use of hand scanners for real-time, 3-D digital outcrop modeling to augment geological field mapping campaigns and highlights the advantages and the limitations. The utility of incorporating hand scanners as an additional tool for augmenting geological mapping is assessed based on 41 outcrop scans from the Gould Lake area, which is located 20 km north of Kingston, Ontario, Canada. The 3-D digital outcrop models gathered included two distinct metamorphic lithologies (marble and quartzofeldspathic gneiss) measuring up to 2.5 m high × 7 m long with an average surface area of 18 m2. This average scan size would take less than 10 min to capture, result in ~18 million individual points per scan, and provide a spatial resolution of ~1 cm for outcrop features. Throughout the course of the investigation, the main benefit of capturing multiple 3-D digital outcrop models was the ability to integrate this real-time, in situ geospatial, and geologic information across multiple visualization scales. This utility and retention of outcrop-scale geospatial information was shown to enhance the understanding of multi-scale geological relationships.


  • Characterizing electromagnetic interference signals for unmanned aerial vehicle geophysical surveys

    by Callum Walter, Alexander Braun, Georgia Fotopoulos

    The development of a functional unmanned aerial vehicle (UAV) mounted aeromagnetic system requires integrating a magnetometer payload onboard a UAV platform in a manner that preserves the integrity of the total magnetic field measurements. One challenge when developing these systems is accounting for the sources of in-flight magnetic and electromagnetic interference signals that are greater than the resolvability threshold of the magnetometer. Electromagnetic interference generated by the platform has the potential to be mitigated using several techniques such as magnetic shielding, filtering, or compensation and can be attenuated by strategically positioning the magnetometer at a distance from the UAV. The integration procedure and selection of a mitigation strategy can be informed by characterizing the electromagnetic interference generated by the platform. Scalogram analysis is used to characterize the high-frequency electromagnetic signals generated by multirotor UAV electromagnetic motors. A low-sensitivity (7 nT) vector, fluxgate magnetometer is used to measure the electromagnetic interference generated by two unique multirotor UAVs in a controlled laboratory setting. Results demonstrate three spectrally distinct electromagnetic signals, each with unique frequency and amplitude, generated by each UAV platform. The frequency of these electromagnetic interference signals is found to be directly proportional to the applied rotation frequency of the electromagnetic motor. The aforementioned knowledge is applied to UAV field surveys to assess the high-frequency electromagnetic interference signals experienced. This is achieved using a high sensitivity (0.01 nT), scalar optically pumped magnetometer with a 1000 Hz sampling frequency. Our results indicate that adequate sensor placement and preflight evaluation of the platform-sensor interactions provide useful mitigation strategies, which can compensate for electromagnetic interference signals generated by the UAV platform during aeromagnetic surveys.