CWCallum Walter

Callum Walter

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Callum Walter has a total of 8 co-authors. Here are the top co-authors by number of shared publications:

  • Alexander Braun

    Department of Geological Sciences and Geological Engineering, Queen’s University, Kingston, ON K7L 3N6, Canada

    6 shared publications
  • Georgia Fotopoulos

    Department of Geological Sciences and Geological Engineering, Queen's University, Kingston, Ontario K7L 3N6, Canada

    4 shared publications
  • G. Fotopoulos

    Department of Geological Sciences and Geological Engineering Queen's University Kingston K7L 3N6 Ontario Canada

    2 shared publications
  • Carl J. Beno

    U.S. Geological Survey, Geology, Minerals, Energy, and Geophysics Science Center 2 , Tucson, Arizona, USA.

    1 shared publication
  • Daniel S. Scheirer

    U.S. Geological Survey, Menlo Park, California, U.S.A.

    1 shared publication
  • Dylan M. Connell

    U.S. Geological Survey, Geology, Geophysics, and Geochemistry Science Center 3 , Denver, Colorado, USA.

    1 shared publication

Latest Publications

  • Open Access

    The Mammoth magnetic anomaly, Pinal County, Arizona

    by Callum A. Walter, Daniel S. Scheirer, Carl J. Beno, Jackson S. Borchardt, Dylan M. Connell

    A high-resolution Earth Mapping Resources Initiative airborne geophysical survey was flown in the southwest North American porphyry copper province to improve bedrock geologic maps and to identify areas that have unrecognized critical mineral resource potential. During the review of the aeromagnetic data, a distinctly monopolar-shaped, negative magnetic anomaly was observed at a flight elevation of 200 m above the ground with a maximum amplitude of –9500 nT. We have named this the Mammoth magnetic anomaly (MMA) because it is centered 12 km northeast of the town of Mammoth, Arizona, USA. The total field anomaly (TFA) contour of –500 nT enclosing the MMA defines an elongate shape measuring 2.5 km long by 1 km wide that trends northwest–southeast. Given the striking nature of this negative, monopolar-shaped magnetic anomaly, we conducted a ground campaign in May 2025 to determine its authenticity and potential relationship to critical mineral endowment. The MMA was confirmed on the ground with a TFA approaching –46,000 nT. Total magnetic intensity (TMI) observations routinely fell below the 18,000 nT operating floor of an industry-standard cesium-vapor total field magnetometer, and extremely low TMI measurements were corroborated along coincident traverse lines using two high dynamic range, but lower sensitivity, smartphone vector magnetometers. The lowest TMI values recorded by both smartphone magnetometers were 1000 nT and confirmed with multiple adjacent and crossing lines. Field observations suggest that this magnetic feature is caused by strong remanent magnetization within fine-grained magnetite hosted within locally altered Pinal Schist.


  • Open Access

    Augmenting geological field mapping with real-time, 3-D digital outcrop scanning and modeling

    by Callum Walter, Fouad Faraj, Georgia Fotopoulos, Alexander Braun

    Hand scanners are compact, lightweight, and capable of generating 3-D digital models. Although they do not compare to conventional methods (terrestrial laser scanning and photogrammetry) in terms of coverage, resolution, and accuracy, they offer increased mobility, speed, and real-time processing capabilities in the field. This study investigates the use of hand scanners for real-time, 3-D digital outcrop modeling to augment geological field mapping campaigns and highlights the advantages and the limitations. The utility of incorporating hand scanners as an additional tool for augmenting geological mapping is assessed based on 41 outcrop scans from the Gould Lake area, which is located 20 km north of Kingston, Ontario, Canada. The 3-D digital outcrop models gathered included two distinct metamorphic lithologies (marble and quartzofeldspathic gneiss) measuring up to 2.5 m high × 7 m long with an average surface area of 18 m2. This average scan size would take less than 10 min to capture, result in ~18 million individual points per scan, and provide a spatial resolution of ~1 cm for outcrop features. Throughout the course of the investigation, the main benefit of capturing multiple 3-D digital outcrop models was the ability to integrate this real-time, in situ geospatial, and geologic information across multiple visualization scales. This utility and retention of outcrop-scale geospatial information was shown to enhance the understanding of multi-scale geological relationships.


  • Characterizing electromagnetic interference signals for unmanned aerial vehicle geophysical surveys

    by Callum Walter, Alexander Braun, Georgia Fotopoulos

    The development of a functional unmanned aerial vehicle (UAV) mounted aeromagnetic system requires integrating a magnetometer payload onboard a UAV platform in a manner that preserves the integrity of the total magnetic field measurements. One challenge when developing these systems is accounting for the sources of in-flight magnetic and electromagnetic interference signals that are greater than the resolvability threshold of the magnetometer. Electromagnetic interference generated by the platform has the potential to be mitigated using several techniques such as magnetic shielding, filtering, or compensation and can be attenuated by strategically positioning the magnetometer at a distance from the UAV. The integration procedure and selection of a mitigation strategy can be informed by characterizing the electromagnetic interference generated by the platform. Scalogram analysis is used to characterize the high-frequency electromagnetic signals generated by multirotor UAV electromagnetic motors. A low-sensitivity (7 nT) vector, fluxgate magnetometer is used to measure the electromagnetic interference generated by two unique multirotor UAVs in a controlled laboratory setting. Results demonstrate three spectrally distinct electromagnetic signals, each with unique frequency and amplitude, generated by each UAV platform. The frequency of these electromagnetic interference signals is found to be directly proportional to the applied rotation frequency of the electromagnetic motor. The aforementioned knowledge is applied to UAV field surveys to assess the high-frequency electromagnetic interference signals experienced. This is achieved using a high sensitivity (0.01 nT), scalar optically pumped magnetometer with a 1000 Hz sampling frequency. Our results indicate that adequate sensor placement and preflight evaluation of the platform-sensor interactions provide useful mitigation strategies, which can compensate for electromagnetic interference signals generated by the UAV platform during aeromagnetic surveys.


  • Open Access

    On Compensating for Magnetometer Swing in UAV Magnetic Surveys

    by Callum Walter, Alexander Braun, Georgia Fotopoulos

    Natural resource exploration has advanced in recent years through integrating unmanned aerial vehicles (UAVs) with high-resolution magnetometer payloads. One design consideration when integrating these systems for mineral exploration applications is ensuring that the magnetic measurement quality is comparable to the previously established methods of terrestrial magnetic and aeromagnetic surveying. High-resolution optically pumped magnetometers, employing a resolution of 0.1 - 0.01 nT, are the standard magnetic sensors used in both manned terrestrial magnetic and aeromagnetic surveys. Integrating a high-resolution optically pumped magnetometer in a multi-rotor UAV payload bay will compromise the integrity of the total magnetic intensity (TMI) measurements due to the electromagnetic interference generated by the brushless permanent magnet synchronous motors and other onboard electromagnetic components. One solution involves physically suspending the high-resolution magnetometer below the resolvability limit of the electromagnetic interference via a semi-rigid mount. However, the swinging motions of the high-resolution magnetometer through the geomagnetic field while in this configuration have the potential to introduce periodic variations in the collected TMI data, compromising quality. Within this study, a UAV-borne aeromagnetic survey was conducted over a mineral exploration target to assess the potential impact of magnetometer swing on collected UAV-borne TMI data. A DJI-S900 multi-rotor UAV and a GEM Systems Potassium Vapour Magnetometer (GSMP-35U) were used to fly a 500 m by 700 m grid, using a line spacing of 25 m and a flight elevation of 35 m above the ground.The optically pumped magnetometer was suspended outside the resolvability limit of the electromagnetic interference below the UAV via a semi-rigid mount. A nine degrees of freedom inertial measurement unit (IMU) was fixed to the semi-rigid mount and a Kalman filter was applied to post-process the measurements calculating the positional variations (pitch, yaw and roll) of the magnetometer. Spectral analysis was applied to the UAV-borne TMI measurements and the IMU positional data assessing contributions to the TMI signal from the swinging, semi-rigidly mounted magnetometer. Periodic signals were observed within the recorded TMI data directly relating to the swinging frequency of the magnetometer in pitch and roll throughout flight. The amplitude of the periodic TMI variations was variable (< 1 nT – 5 nT) throughout the survey and depended on the horizontal gradient of the ambient magnetic field and the arc length of the magnetometer swing. The magnetometer swinging frequency (~0.35 Hz) was determined to be primarily dependant on the magnetometer suspension length. Overall, the wavelength of the periodic TMI variations due to the swinging motions was characterized with the IMU measurements and determined to be spectrally unique from the longer wavelength geological signals targeted within the survey area. Due to the wavelengths of the targeted and untargeted signals not spectrally overlapping, the TMI variations related to magnetometer swing noise were filtered out. The design factors controlling the wavelengths of the targeted geologic signals (flight speed) and untargeted magnetometer swing noise (suspension length) must be considered when integrating high-resolution magnetometers on multi-rotor UAVs, such that the wavelengths do not spectrally overlap and phase-based compensation algorithms are not required.


  • High‐resolution unmanned aerial vehicle aeromagnetic surveys for mineral exploration targets

    by C. Walter, A. Braun, G. Fotopoulos

    Recent advancements in geophysical exploration have been realized through reliably integrating unmanned aerial vehicle platforms with lightweight, high‐resolution magnetometer payloads. Unmanned aerial vehicle aeromagnetic surveys can provide a contemporary data product between the two end‐members of coverage and resolution attained using manned airborne and terrestrial magnetic surveys. This new data product is achievable because unmanned aerial vehicle platforms can safely traverse with magnetometer payloads at flight elevations closer to ground targets than manned airborne surveys, while also delivering an increased coverage rate compared to walking conventional terrestrial surveys. This is a promising new development for geophysical and mineral exploration applications, especially in variable terrains. A three‐dimensional unmanned aerial vehicle aeromagnetic survey was conducted within the Shebandowan Greenstone Belt, northwest of Thunder Bay, Ontario, Canada, in July 2017. A series of two‐dimensional grids (∼500 m × 700 m) were flown at approximate elevations of 35, 45 and 70 m above ground level using a Dà‐Jiāng Innovations multi‐rotor unmanned aerial vehicle (S900) and a GEM Systems, Inc., Potassium Vapour Magnetometer (GSMP‐35U). In total, over 48 line‐km of unmanned aerial vehicle aeromagnetic data were flown with a line spacing of 25 m. The collected aeromagnetic data were compared to a regional heliborne aeromagnetic survey flown at an elevation of approximately 85 m above the terrain, with a line spacing of 100 m, as well as a follow‐up terrestrial magnetic survey. The first vertical derivative of the gathered unmanned aerial vehicle total magnetic field data was calculated both directly between each of the different flight elevations, and indirectly by calculating the values predicted using upward continuation. This case study demonstrates that low flight elevation unmanned aerial vehicle aeromagnetic surveys can reliably collect industry standard total magnetic field measurements at an increased resolution when compared to manned airborne magnetic surveys. The enhanced interpretation potential provided by this approach also aided in delineating structural controls and hydrothermal fluid migration pathways (a pair of adjacent shear zones) related to gold mineralization on site. These structural features were not clearly resolved in the regional manned airborne magnetic data alone, further demonstrating the utility of applying high‐resolution unmanned aerial vehicle aeromagnetic surveys to mineral exploration applications. The conclusions and interpretations drawn from the unmanned aerial vehicle aeromagnetic data, coupled with historical data, were applied to make a new gold mineralization discovery on the site, assayed at 15.7 g/t.


  • Spectral Analysis of Magnetometer Swing in High-Resolution UAV-borne Aeromagnetic Surveys

    by Callum Walter, Alexander Braun, Georgia Fotopoulos

    Electromagnetic interference produced by multi-rotor UAVs has the potential to compromise the integrity of UAV-borne total magnetic field (TMI) measurements collected with high-resolution optically pumped magnetometers. One method to overcome this challenge involves suspending the magnetometer sensor below the zone of electromagnetic interference via a semi-rigid mount. The semi-rigid mount allows the magnetometer payload to freely move in the pitch and roll axes, while rigidly fixing the yaw of the magnetometer to that of the multi-rotor UAV. The swinging motions of the magnetometer suspended below the UAV have the potential to introduce periodic variations in the collected magnetic field data. Within this study, spectral analysis was applied to UAV-borne TMI measurements to assess contributions to the signal from the swinging, semi-rigidly mounted magnetometer payload. Overall, it was concluded that when the magnetometer was placed outside the zone of electromagnetic interference created by the UAV, compensation and filtering was not required to achieve industry standard measurements. This result was due to the magnetometer swinging through the relatively low-amplitude geomagnetic field gradient. However, when the magnetometer was placed within the zone of UAV-induced electromagnetic interference, a periodic, high-frequency signal was apparent in the TMI measurements. This was determined to be caused by the swinging of the suspended magnetometer payload within the high-gradient electromagnetic field produced by the multi-rotor UAV. The periodic signal (~0.35 Hz) was successfully identified and removed with a low-pass filter in the frequency domain, resulting in TMI measurements of industry standard quality. Filtering is a necessary step to avoid contaminating the magnetic field signals originating from sub-surface targets with unwanted signals related to the swinging of the magnetometer. Filtering can be applied when the targeted signal frequencies and the swinging signal frequencies do not spectrally overlap. This relationship must be considered in order to avoid removing important target signals during the filtering process.


  • Impact of three‐dimensional attitude variations of an unmanned aerial vehicle magnetometry system on magnetic data quality

    by Callum A. Walter, A. Braun, G. Fotopoulos

    Optically pumped vapour magnetometers have an orientation dependency in measuring the scalar component of the ambient magnetic field which leads to challenges for integration with mobile platforms. Quantifying the three‐dimensional attitude variations (yaw, pitch and roll) of an optically pumped vapour magnetometer, while in‐flight and suspended underneath a rotary unmanned aerial vehicle, aids in the successful development of reliable, high‐resolution unmanned aerial vehicle magnetometry surveys. This study investigates the in‐flight three‐dimensional attitude characteristics of a GEM Systems Inc. GSMP‐35U potassium vapour magnetometer suspended 3 m underneath a Dà‐Jiāng Innovations S900 multi‐rotor unmanned aerial vehicle. A series of unmanned aerial vehicle‐borne attitude surveys quantified the three‐dimensional attitude variations that a simulated magnetometer payload experienced while freely (or semi‐rigidly) suspended underneath the unmanned aerial vehicle in fair weather. Analysis of the compiled yaw, pitch and roll data resulted in the design of a specialized semi‐rigid magnetometer mount, implemented to limit magnetometer rotation about the yaw axis. A subsequent unmanned aerial vehicle‐borne magnetic survey applying this specialized mount resulted in more than 99% of gathered GSMP‐35U magnetic data being within industry standards. Overall, this study validates that maintaining magnetometer attitude variations within quantified limits (±5° yaw, ±10° pitch and roll) during flight can yield reliable, continuous and high‐resolution unmanned aerial vehicle‐borne magnetic measurements.