IBIvan M. Budzulyak

Ivan M. Budzulyak

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ivan M. Budzulyak has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Electrochemical Behavior of Nanocrystalline NiMoO4 Hydrate Modified by Ultrasound

    by Olha Popovych, Ivan Budzulyak, Mariia Khemii, Roman Ilnytskyi, Lyubov Yablon

    To improve the specific capacitance, power and energy of electrical energy storage devices, in particular hybrid capacitors, various methods of cathode material modification are used. One of the methods of modifying nanostructured materials without applying high temperatures, pressures and long reaction times is ultrasonic treatment. Although the interaction of ultrasound with the structure and surface of electrode materials is well enough studied, there are few works that investigate the optimal duration of ultrasonic treatment and its relationship with the capacitive characteristics of these materials. Therefore, we investigated the efficiency of ultrasonic dispersion of nanocrystalline nickel molybdate hydrate for 15, 60 and 90 minutes. The appearance of two cathodic peaks on cyclic voltammetry patterns was analyzed and the charge / discharge mechanism of the electrode based on nanocrystalline NiMoO4 hydrate was presented. Based on the results of potentiodynamic and galvanostatic studies the specific capacitances of the initial NiMoO4 and the material modified by ultrasound for 15, 60 and 90 minutes were calculated. The proton diffusion coefficients of nickel molybdate hydrate were determined on the basis of the Randles–Sevcik equation. NiMoO4 subjected to ultrasonic dispersion for 60 min as a cathode material in a hybrid electrochemical system was tested.

  • Open Access

    Effect of Synthesis Conditions on Capacitive Properties of Porous Carbon Derived from Hemp Bast Fiber

    by Michał Bembenek, Volodymyr Kotsyubynsky, Volodymyra Boychuk, Bogdan Rachiy, Ivan Budzulyak, Łukasz Kowalski, Liubomyr Ropyak

    A systematic study of the influence of synthesis conditions on the structural, morphological, and electrical properties, as well as the electrochemical performance of hemp fiber-derived carbon materials was performed. An analysis of the capacitive response of carbons obtained under various activation conditions with additional treatment with HNO3 and annealing was completed. The contribution of the formation of an electrical double layer at the outer electrode–electrolyte interface, as well as on surfaces inside micropores, has been studied and analyzed in terms of the effect of the turbostratic carbon properties (average lateral size of graphite crystallites, pore size distribution, BET surface area).


  • Structure and Electrochemical Properties of Laser-Modified NiWO4

    by Yurii Starchuk, Olha Popovych, Bogdan Rachiy, Ivan Budzulyak

    In recent years, nickel tungstate has attracted considerable research interest as an electrode material for supercapacitors. In this work, NiWO4 was synthesized by co-precipitation and exposed to laser irradiation. The structure of nickel tungstate was investigated by X-ray diffraction and its electrochemical properties by potentiodynamics, galvanostatic and impedance spectroscopy methods. The results show that NiWO4 subjected to laser irradiation for 180 s showed higher specific characteristics than the initial material. Namely, at a discharge current of 1 mA, NiWO4 achieves a specific capacitance of 153 F/g, and this value is 48% higher than that of the initial material. The higher specific characteristics of laser-modified NiWO4 result from the ability of the material to interact better with electrolyte ions due to the passage of fast redox reactions and the capacitance of the electrical double layer, which is confirmed by impedance studies.


  • Effect of Synthesis Conditions on Pseudocapacitance Properties of Nitrogen-Doped Porous Carbon Materials

    by Volodymyra Boychuk, Volodymyr Kotsyubynsky, Andrii Kachmar, Sergiy Budzulyak, Ivan Budzulyak, Bogdan Rachiy, Lyubov Yablon

    The electrochemical properties of the nitrogen-enriched carbons obtained by plant raw treatment as electrode material for supercapacitors were investigated by electrochemical impedance spectroscopy, cycling voltammetry and galvanostatic charge-discharge cycling in KOH aqueous electrolyte. The effect of activation agent (NaOH) concentration and carbonization temperature were analyzed. The separation of double layer and redox capacitance components was done. The dominating role of microporosity for capacitive properties was demonstrated. The capacitance of model capacitors based on carbons obtained at different modes was calculated from both from cycling voltammetry and galvanostatic charge-discharge data. The maximal values of specific capacitance of carbon materials carbonized at 600°C and 900°C are about 100 and 120 F/g, respectively.


  • Open Access

    Ultrasonic modification of carbon materials for electrochemical capacitors

    by Bogdan I. Rachiy, Marian O. Nykoliuk, Ivan M. Budzulyak, Andrii I. Kachmar

    The paper is devoted to study the ultrasonic impact on the biomass of natural raw materials, which were used for the creation a nanoporous carbon material (NCM), which was used as electrode material for electrochemical capacitors (EC). The dry shells of apricot seeds were a feedstock, which were modified by the chemical treatment in the phosphoric acid and part of them were impacted by ultrasonic waves for 25 minutes. The NCM, which were obtained by carbonization at 550 °C, were modified by chemical treatment in the nitric acid. Thus, the different of modification NCM was obtained to compare their capacitance characteristics for EC. From experimental data we can do a conclusion, that ultrasonic modification and chemical treatment in nitric acidare improvecapacitance characteristics of NCM for EC.


  • Open Access

    Thermodynamic Parameters of the Intercalation Reaction in Thermal and Laser Modified Nanodispersed Anatase

    by M. Ya. Sehin, I. M. Budzulyak, O. V. Morushko, L. S. Yablon

    It is modified matrix of anatase in turn of the thermal and laser treatments. The dependence of Gibbs energy change of the intercalation reaction of lithium with the guest load degree change was analyzed. Laser irradiation turned out to increase twice the value of maximum lithium “guest” loading, constricting heterophase area and changing contrarily concentration genesis of temperature dependence of entropy of lithium dilution. The optimal conditions of laser irradiation nanodispersive anatase (pulse energy E = 0,02 J, pulse duration τ = 15 ns repetition frequency f = 28 Hz, duration of exposure to 5 min.), at which specific energy characteristics of LPS, formed on its basis, increased by 55% is set.

  • Open Access

    Electrochemical Properties of Nanoporous Carbon Material in Aqueous Electrolytes

    by Bogdan I. Rachiy, Ivan M. Budzulyak, Vitalii M. Vashchynsky, Nataliia Ya. Ivanichok, Marian O. Nykoliuk

    The paper is devoted to the study of the behavior of capacitor type electrochemical system in the К+-containing aqueous electrolytes. Nanoporous carbon material (NCM) was used as the electrode material, obtained by carbonization of plant raw materials with the following chemical activation. Optimization of pore size distribution was carried out by chemical-thermal method using potassium hydroxide as activator. It is shown that obtained materials have high values of capacitance which is realized by charge storage on the electrical double layer and by pseudocapacitive ion storage on the surface of the material. It is established that based on NCM, electrochemical capacitors are stable in all range of current density and material capacity essentially depends on appropriate choice of electrolyte.


  • Open Access

    Thermochemically activated carbon as an electrode material for supercapacitors

    by Bogdan K Ostafiychuk, Ivan M Budzulyak, Bogdan I Rachiy, Vitalii M Vashchynsky, Volodymyr I Mandzyuk, Roman P Lisovsky, Lyudmyla O Shyyko


  • Open Access

    Thermochemically activated carbon as an electrode material for supercapacitors

    by Bogdan K Ostafiychuk, Ivan M Budzulyak, Bogdan I Rachiy, Vitalii M Vashchynsky, Volodymyr I Mandzyuk, Roman P Lisovsky, Lyudmyla O Shyyko

    The results of electrochemical studies of nanoporous carbon as electrode material for electrochemical capacitors (EC) are presented in this work. Nanoporous carbon material (NCM) was obtained from the raw materials of plant origin by carbonization and subsequent activation in potassium hydroxide. It is established that there is an optimal ratio of 1:1 between content of KOH and carbon material at chemical activation, while the maximum specific capacity of NCM is 180 F/g. An equivalent electrical circuit, which allows modeling of the impedance spectra in the frequency range of 10−2 to 105 Hz, is proposed, and a physical interpretation of each element of the electrical circuit is presented.