YDYasemin İspirli Doğaç

Yasemin İspirli Doğaç

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yasemin İspirli Doğaç has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Synergistic stabilization of laccase within a Co-malonate framework: Characterization and its biocatalytic application in BPA degradation

    by Gökmen Arabacı, Aleyna Çağan, Yasemin İspirli Doğaç

    Living organisms are continuously exposed to a diverse array of naturally occurring and synthetic chemicals. Over the past century, industrial expansion has introduced hundreds of novel synthetic c...

  • Open Access

    Genomic and Kinetic Modeling Involving Nanoparticle-Mediated Delivery of a Novel Chitinase Enzyme to Outpace Tuta absoluta Damage

    by Yasemin Ispirli, Ahmet Can, Mehmet Kececi, Saliha S. Sahin, Sumeray Ezgi Ayan, Omur Baysal

    The tomato leafminer, Tuta absoluta, poses a severe global agricultural threat due to its rapid leaf-mining behavior and swift development of resistance to conventional chemical pesticides. While microbial chitinases are potent biopesticides, their field efficacy is limited by environmental degradation and the short exposure window before larvae penetrate leaf tissues. This study evaluates a stimuli-responsive, controlled-release nanobiopesticide system utilizing a novel chitinase from newly characterized Serratia marcescens GBS19. A 61.1 kDa chitinase (GBS19_ChiA) was heterologously expressed in Escherichia coli and purified to a specific activity of 215.01 U/mg. The enzyme was immobilized onto starch-coated silica nanoparticles designed for target-triggered release via host alpha-amylase. Genomic profiling and R-based kinetic modeling were integrated to evaluate the efficacy of purified and immobilized forms against T. absoluta. Immobilization enhanced thermal and pH stability, with the nanocarrier maintaining 85% activity over 10 weeks. In larval bioassays, immobilization increased mortality from 21.9% to 59.4% (5000 U/mL) by day 3, reaching 62.5% by day 6. Genomic analysis identified an expansive secretome and a Type VI Secretion System (T6SS), characterizing GBS19 as a multi-pronged pathogen. Kinetic modeling established that while immobilized enzymes are effective, the 2.5-hour exposure time on T. absoluta requires the synergistic action of chitinases (ChiA/B/C) to reach the lethal desiccation threshold before larvae establish protective mines. Starch-coated silica nanoparticles significantly improve chitinase stability and delivery. However, overcoming the rapid penetration of T. absoluta necessitates a whole-cell or multi-enzyme synergistic approach to outpace larval behavioural defences.

  • Open Access

    Sustainable biodiesel from an invasive fish using immobilized lipase on magnetic nanogels as a novel management approach

    by Gülşah Saç, Gökmen Arabacı, Aleyna Çağan, Sevan Ağdamar, Müfit Özuluğ, Yasemin İspirli Doğaç

    An alternative strategy to mitigate the ecological and economic challenges posed by invasive fish species is to transform these organisms into valuable resources, generating economic benefits while simultaneously addressing ecosystem-related concerns. However, while the search for sustainable feedstocks continues, the specific potential of highly resilient invasive fish species for high-yield biodiesel production has not yet been evaluated. The aim of this study was to address this research gap by producing high-yield biodiesel using the invasive fish Carassius gibelio as an oil source. In this context, lipase immobilized MnFe2O4- polyhydroxymethyl methacrylate magnetic nanogels were prepared and the production system conditions (lipase amount, methanol/oil molar ratio, and temperature) were optimized. Optimal conditions were obtained using a 4000 U lipase amount, a 5:1 methanol/oil molar ratio and a temperature of 55 °C. A 97.45% biodiesel yield was achieved with this system prepared under optimum conditions, and this prepared biocatalysis system was able to produce biodiesel with at least 50% yield 13 times. This study is the first to use the highly invasive C. gibelio as a sustainable raw material for biodiesel production. It introduces a novel biocatalytic approach by integrating invasive fish species utilization with a reusable MnFe2O4-pHEMA nanogel system, achieving both high efficiency and operational stability.

  • Open Access

    Antibiofilm and Anti-Quorum Sensing Potential of Safely-Synthesized Hydrated Zirconium Oxide-Coated Alginate Beads against Some Pathogenic Bacteria

    by Alfred Ngenge Tamfu, Yasemin Ispirli Dogaç, Ozgur Ceylan, Andreea Botezatu Dediu, Selahattin Bozkurt, Rodica Mihaela Dinica

    Water is essential to life, but access to uncontaminated water remains a global challenge. Metal oxides possess particular characteristics required for removing heavy metals, inorganic and organic pollutants from wastewater as well as inhibiting microorganisms. Zirconium oxide and alginate which are nontoxic materials were used to synthesize hydrated zirconium oxide-alginate coated materials, ZAB-1 (1.5 alginate) and ZAB-2 (2.0 alginate). FT-IR was used to characterize the functional groups while surface morphology was characterized using SEM. XRD was used to characterize the material structure of the resulting composite. Against Chromobacterium violaceum CV12472, minimal inhibitory concentrations (MICs) were 0.625mg/mL for ZAB-1 and ZAB-2 while against C. violaceum CV026, the MIC values were 0.625mg/mL and 1.25mg/mL for ZAB-1 and ZAB-2, respectively. At MIC and sub-MIC concentrations, the synthesized beads inhibited the production of violacein in C. violaceum CV12472 and C. violaceum CV026, indicating that they can reduce QS-mediated virulence factors in bacteria. Antimicrobial activity was evaluated against Staphylococcus aureus, Enterococcus faecalis, Listeria monocytogenes, Escherichia coli, Pseudomonas aeruginosa, Salmonella typhi, Candida albicans, and Candida tropicalis, and MIC values ranged from 1.25mg/mL to 10mg/mL. Biofilm inhibition percentages were relatively high against S. aureus, E. coli, and C. albicans. It is observed that the increase in the alginate amount from 1.5 to 2.0 improves the antimicrobial, anti-QS, and antibiofilm effects. The alginate makes the zirconium oxide particles biocompatible and easily recoverable from water after treatment. ZAB-1 and ZAB-2 materials can therefore be sustainable materials for water treatment since it can inhibit pathogenic bacteria in water and equally satisfy environmental friendliness. The synthesized particles reduced the chances for antimicrobial resistance since they disrupted QS in bacteria and eliminated biofilms, thereby preventing biofouling of microbial communities in water. Future prospects of this study involve biofiltration, that is, the use of the synthesized composite in the development of a safe and compatible biofilter for water purification.


  • NiFe 2 O 4 /polyhydroxymethyl methacrylate and Fe 3 O 4 /polyhydroxymethyl methacrylate magnetic nanogels for lipase immobilization

    by Yasemin İspirli Doğaç, Gökmen Arabacı, Hanife Erden, Funda Öztürk

    In this study, the optimization and characterization of NiFe2O4/Polyhydroxymethyl methacrylate (NF-pHEMA) and Fe3O4/Polyhydroxymethyl methacrylate (M-pHEMA) magnetic nanogel structures were carried out and the usability of these magnetic nanogels for the immobilization of lipase enzyme was investigated. Fe3O4/pHEMA (M-pHEMA) nanogel and NiFe2O4/pHEMA (NF-pHEMA) nanogel structures were produced by the photochemical method. The characterization of these materials was performed by FTIR, SEM, AFM analysis. Then, the lipase enzyme was immobilized on magnetic nanogels by adsorption and after that cross-linking method under optimum conditions. For the characterization of lipase immobilized magnetic nanogels; optimum temperature, thermal stability, optimum pH, pH stability, reusability and kinetic parameters were investigated and nature and immobilized lipase were compared. It was observed that there was a significant improvement in the thermal and pH stability of the immobilized enzyme compared to the free enzyme. Lipase-immobilized M-pHEMA lost 50% of its activity after 15 uses and after 16 uses of lipase-immobilized NF-pHEMA. The results show that immobilization to the synthesized magnetic nanogels provides an improvement in the properties of the lipase enzyme. It is thought that the synthesized magnetic nanogels can be an alternative for different applications, especially drug delivery systems. Graphical Abstract


  • An application of CoFe2O4/alginate magnetic beads: drug delivery system of 5-fluorouracil

    by Ayşegül YILDIRIM, Yasemin İsPi̇rLi̇ Doğaç

    Magnetic hyperthermia therapy is expected to play an important role in the treatment of more and more cancers. The synergistic effects of using together hyperthermia and cancer drugs have been shown by literature studies to be more effective than either hyperthermia treatment alone or chemotherapy alone. In addition, magnetic materials that can be used as a contrast agent enable magnetic resonance imaging of the tumor, which is also useful in seeing the treatment progress. This study, which was designed for this purpose, occurred in three parts: In the first part, magnetic CoFe2O4/alginate composite beads were prepared and characterized with thermogravimetric analysis (TGA) and scanning electron microscope (SEM). In the second part, the swelling behaviour of magnetic composite beads was investigated at pH 1.2, pH 7.4 and pH 6.8. It was seen that at pH 7.4 and pH 6.8, that is, near neutral pH, CFA swelled by 81.54% and 82.69%, respectively. In the third part, 5-Fluorouracil was encapsulated at the different ratios in CoFe2O4/alginate composite beads, and release experiments were performed at pH 1.2, pH 7.4 and pH 6.8. 5-FU release was calculated with Korsmeyer-Peppas, Higuchi, first-order, and zero-order models. It was seen that the drug release systems prepared were suitable for all kinetic models. Magnetic CoFe2O4/alginate composite bead, which is the drug carrier, was determined to be suitable for controlled release for 5-Fluorouracil.


  • MnFe2O4/alginate magnetic beads as platform for cancer drug delivery: an in vitro study of 5-Fluorouracil release

    by Ayşegül Yıldırım, Yasemin İspirli Doğaç

    MnFe2O4/alginate magnetic beads was prepared, by drop-by-drop process, characterized and evaluated for use in cancer drug (5-Fluorouracil) delivery. In the literature, there are many studies in controlled drug systems where different magnetic composites, which are not used in this study, are used as carriers and different drugs are loaded. When they were evaluated, it was seen that Fe3O4 was generally preferred as the magnetic center. In this sense, the MnFe2O4 magnetic particles used in this study are thought to contribute to the literature. So, the preparation parameters of MnFe2O4/alginate magnetic beads were determined, TGA and SEM were used for the characterization of magnetic beads and also swelling profile of the magnetic beads were defined. 5-Fluorouracil, a model cancer drug, was encapsulated at different amounts in magnetic beads. Delivery studies were performed at pH 7.4, pH 6.8 and pH 1.2 and delivery profiles was determined by using Korsmeyer-Peppas, Higuchi, first-order and zero-order models. Graphical Abstract


  • Drug delivery systems of CoFe2O4/chitosan and MnFe2O4/chitosan magnetic composites

    by Ayşegül Yildirim, Yasemin Ispirli Doğaç

    The study consists of three parts. In the first part, synthesis and characterization of core-shell magnetic composite beads based on chitosan and containing two different magnetic nanoparticles were carried out. The beads were formed from CoFe2O4/chitosan and MnFe2O4/chitosan. TGA and SEM were used for the characterization of core-shell materials. In the second part, swelling experiments of magnetic beads were performed. In the third part, 5-Fluorouracil was encapsulated at different rates in two different magnetic materials, release experiments were carried out at pH 7.4, pH 6.8, and pH 1.2, and the model of drug release was determined. Korsmeyer–Peppas, Higuchi, first-order, and zero-order models were used for mathematical modeling. Both prepared systems were found to be suitable for controlled release for 5-Fluorouracil.


  • Urease immobilized electrospun PVA/chitosan nanofibers with improved stability and reusability characteristics: an application for removal of urea from artificial blood serum

    by Nur Kutlu, Yasemin İspirli Doğaç, İlYas Deveci, Mustafa Teke

    Electrospun polyvinyl alcohol (PVA)/Chitosan nanofibers were successfully prepared and were used as carriers for the first time in urease immobilization. Also, urease immobilized electrospun PVA/Chitosan nanofibers were applied for the removal of urea from artificial blood serum by recycled reactor. The nanofibers were optimized and synthesized by electrospinning technique according to the operational parameters. The morphology and structure of the nanofibers were characterized by scanning electron microscopy (SEM), attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) and thermogravimetric analysis (TGA). Urease was immobilized on the nanofibers by adsorption and crosslinking methods. According to immobilization results, nanofiber enhanced urease stability properties like thermal stability, pH stability, and reusability. Urease immobilized electrospun PVA/Chitosan nanofiber protected its activity by 85% after 10 uses and 45% after 20 uses. Urea removal rates of artificial blood serum were as follows: 100% at 1st cycle, 95% at 2nd, 3rd and 4th cycles; 85% at the 5th cycle; 76% at the 6th cycle, and 65% at the last three cycles.