Ilyas Deveci
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Ilyas Deveci has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Yasemin İspirli Doğaç
Chemistry and Chemical Processing Technology Department, Muğla Vocational School, Muğla Sıtkı Koçman University, Muğla, Turkey
3 shared publications - Mustafa Teke
Chemistry Department, Faculty of Science, Muğla Sıtkı Koçman University, Muğla, Türkiye
2 shared publications A. Ozen
1 shared publication- Abdalaziz Aljabour
Johannes Kepler University Linz
1 shared publication - Adem Sarilmaz
Karamanoglu Mehmetbey University, Department of Metallurgical and Materials Engineering, 70200, Karaman, Turkey
1 shared publication - Adem Yar
Department of Mechanical Engineering, Bingöl University, Bingöl, Türkiye
1 shared publication
Latest Publications
- 15 July 2026
- Published by Black Sea Journal of Engineering and Science in Black Sea Journal of Engineering and Science
- Vol. 9 (4) , 1737-1748
Enhanced Sonocatalytic Degradation of Organic Pollutants Using Noble-Metal-Doped Electrospun TiO2 Nanofibers
In this study, the sonocatalytic oxidation performance of electrospun TiO2 nanofibers modified with noble metals (Pt, Pd, Ag, Ce, Cu) was systematically investigated for the degradation of Rhodamine B (RhB) as a model organic pollutant. TiO2 nanofibers were synthesized via the electrospinning method and calcined at 550 °C to obtain stable anatase-phase structures. Metal incorporation was performed through wet impregnation followed by thermal treatment, resulting in homogeneously dispersed metal nanoparticles anchored on the TiO2 surface. Characterization analyses (SEM, XRD, FTIR, BET) confirmed uniform fibrous morphology, preservation of the anatase phase, and increased surface area upon metal loading. Sonocatalytic degradation experiments were conducted under varying pH (3–10) and oxidant (H₂O₂) concentrations. Among the investigated catalysts, the sonocatalytic activity followed the order Pt–TiO₂ > Ce–TiO₂ > Cu–TiO₂ ≈ Pd–TiO₂ > TiO₂ > Ag–TiO₂, with Pt–TiO₂ exhibiting the highest RhB degradation efficiency. Among the tested catalysts, Pt–TiO2 nanofibers exhibited the highest degradation efficiency (~95%), followed by Ce–TiO2 (~70%), while Pd–TiO2 and Cu–TiO2 showed moderate activity (45–55%). The Ag–TiO2 sample displayed the lowest performance (~40%) due to possible nanoparticle aggregation and reduced active surface area. Kinetic analysis revealed that the degradation process predominantly followed pseudo-first-order kinetics, with apparent rate constants (k) of 0.0020, 0.0146, 0.0033, 0.0005, 0.0011, and 0.0034 min⁻¹ for TiO₂, Pt–TiO₂, Pd–TiO₂, Ag–TiO₂, Ce–TiO₂, and Cu–TiO₂, respectively. The optimal degradation occurred at neutral pH, whereas the addition of 0.001 M H₂O₂ lowered efficiency through radical scavenging effects. These results demonstrate that noble-metal-enriched TiO2 nanofibers synthesized via electrospinning possess high activity, stability, and recyclability under ultrasonic irradiation, offering great potential for sustainable wastewater treatment and the advancement of green sonochemical oxidation technologies.
- 15 July 2026
- Published by Black Sea Journal of Engineering and Science in Black Sea Journal of Engineering and Science
- Vol. 9 (4) , 1737-1748
Enhanced Sonocatalytic Degradation of Organic Pollutants Using Noble-Metal-Doped Electrospun TiO2 Nanofibers
In this study, the sonocatalytic oxidation performance of electrospun TiO2 nanofibers modified with noble metals (Pt, Pd, Ag, Ce, Cu) was systematically investigated for the degradation of Rhodamine B (RhB) as a model organic pollutant. TiO2 nanofibers were synthesized via the electrospinning method and calcined at 550 °C to obtain stable anatase-phase structures. Metal incorporation was performed through wet impregnation followed by thermal treatment, resulting in homogeneously dispersed metal nanoparticles anchored on the TiO2 surface. Characterization analyses (SEM, XRD, FTIR, BET) confirmed uniform fibrous morphology, preservation of the anatase phase, and increased surface area upon metal loading. Sonocatalytic degradation experiments were conducted under varying pH (3–10) and oxidant (H₂O₂) concentrations. Among the investigated catalysts, the sonocatalytic activity followed the order Pt–TiO₂ > Ce–TiO₂ > Cu–TiO₂ ≈ Pd–TiO₂ > TiO₂ > Ag–TiO₂, with Pt–TiO₂ exhibiting the highest RhB degradation efficiency. Among the tested catalysts, Pt–TiO2 nanofibers exhibited the highest degradation efficiency (~95%), followed by Ce–TiO2 (~70%), while Pd–TiO2 and Cu–TiO2 showed moderate activity (45–55%). The Ag–TiO2 sample displayed the lowest performance (~40%) due to possible nanoparticle aggregation and reduced active surface area. Kinetic analysis revealed that the degradation process predominantly followed pseudo-first-order kinetics, with apparent rate constants (k) of 0.0020, 0.0146, 0.0033, 0.0005, 0.0011, and 0.0034 min⁻¹ for TiO₂, Pt–TiO₂, Pd–TiO₂, Ag–TiO₂, Ce–TiO₂, and Cu–TiO₂, respectively. The optimal degradation occurred at neutral pH, whereas the addition of 0.001 M H₂O₂ lowered efficiency through radical scavenging effects. These results demonstrate that noble-metal-enriched TiO2 nanofibers synthesized via electrospinning possess high activity, stability, and recyclability under ultrasonic irradiation, offering great potential for sustainable wastewater treatment and the advancement of green sonochemical oxidation technologies.
- Open Access
- 17 March 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (12) , 18805-18813
Nonlinear Kinetics and Isotherm Modeling of Rhodamine B Adsorption onto Al 2 O 3 Decorated Laponite
The present study investigates the adsorption of Rhodamine B (RhB), a persistent cationic dye, onto Al2O3-decorated Laponite synthesized via a two-step modification process. In this method, cetyltrimethylammonium bromide (CTAB) was utilized to modify the Laponite surface, effectively preventing the gelation tendency of pristine Laponite and enhancing surface functionality. The characterization analyses yielded a BET surface area of 237.1 m2/g for the modified sample, in comparison to 319.0 m2/g for the unmodified Laponite. This was accompanied by an increase in mesopore volume (0.218 cm3/g vs 0.165 cm3/g). Experiments designed to optimize adsorption processes were conducted utilizing a Central Composite Design (CCD). The experimental outcomes demonstrated that under conditions deemed optimal (C0 ≈ 50 mg/L, dosage ≈ 30 mg, contact time ≈ 100 min), the maximum attainable removal efficiency for Rhodamine B (RhB) exceeded 92%. Kinetic analysis indicated that the Elovich model provided the most suitable fit (R2 = 0.994), thus confirming the heterogeneous and chemisorptive nature of the process. Among the isotherm models that were examined, the Toth model demonstrated the most optimal fit (qmax = 169.7 mg/g; R2 = 0.993), with the Sips and Redlich–Peterson models following closely behind, surpassing the performance of the Langmuir model (qmax = 156.9 mg/g; R2 = 0.991). Thermodynamic analysis revealed an endothermic adsorption process (ΔH = +11.16 kJ/mol), a positive entropy change (ΔS = +24.1 J/mol·K), and a range of ΔG values between +3.5 and +4.0 kJ/mol, suggesting a spontaneous tendency at higher temperatures. The findings of this study demonstrate that CTAB/Al2O3-modified Laponite is a highly effective adsorbent for the removal of RhB from wastewater.
- 17 March 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (12) , 18805-18813
Open AccessNonlinear Kinetics and Isotherm Modeling of Rhodamine B Adsorption onto Al 2 O 3 Decorated Laponite
The present study investigates the adsorption of Rhodamine B (RhB), a persistent cationic dye, onto Al2O3-decorated Laponite synthesized via a two-step modification process. In this method, cetyltrimethylammonium bromide (CTAB) was utilized to modify the Laponite surface, effectively preventing the gelation tendency of pristine Laponite and enhancing surface functionality. The characterization analyses yielded a BET surface area of 237.1 m2/g for the modified sample, in comparison to 319.0 m2/g for the unmodified Laponite. This was accompanied by an increase in mesopore volume (0.218 cm3/g vs 0.165 cm3/g). Experiments designed to optimize adsorption processes were conducted utilizing a Central Composite Design (CCD). The experimental outcomes demonstrated that under conditions deemed optimal (C0 ≈ 50 mg/L, dosage ≈ 30 mg, contact time ≈ 100 min), the maximum attainable removal efficiency for Rhodamine B (RhB) exceeded 92%. Kinetic analysis indicated that the Elovich model provided the most suitable fit (R2 = 0.994), thus confirming the heterogeneous and chemisorptive nature of the process. Among the isotherm models that were examined, the Toth model demonstrated the most optimal fit (qmax = 169.7 mg/g; R2 = 0.993), with the Sips and Redlich–Peterson models following closely behind, surpassing the performance of the Langmuir model (qmax = 156.9 mg/g; R2 = 0.991). Thermodynamic analysis revealed an endothermic adsorption process (ΔH = +11.16 kJ/mol), a positive entropy change (ΔS = +24.1 J/mol·K), and a range of ΔG values between +3.5 and +4.0 kJ/mol, suggesting a spontaneous tendency at higher temperatures. The findings of this study demonstrate that CTAB/Al2O3-modified Laponite is a highly effective adsorbent for the removal of RhB from wastewater.
- 1 March 2026
- Published by Konya Muhendislik Bilimleri Dergisi in Konya Journal of Engineering Sciences
- Vol. 14 (1) , 413-432
SYNTHESIS AND CHARACTERIZATION OF KAOLIN–ALUMINA COMPOSITE ADSORBENT FOR REMOVAL OF RHODAMINE B
In this study, a kaolin–alumina composite adsorbent was synthesized and characterized for the removal of Rhodamine B (RhB) from aqueous solutions. Kaolin clay was modified with Al₂O₃ using the sol–gel method to improve surface properties and enhance adsorption capacity. The resulting composite was characterized by SEM–EDX, XRD, FTIR, and N₂ adsorption–desorption analyses, which confirmed increased surface area and porosity compared to raw kaolin. Batch adsorption experiments were conducted to examine the effects of contact time, initial dye concentration, and adsorbent dosage on RhB removal efficiency. The adsorption process was optimized using Response Surface Methodology (RSM) with a Central Composite Design (CCD). Regression analysis indicated that the initial dye concentration was the most influential factor controlling removal efficiency. Equilibrium data were best described by the Sips isotherm model, with a maximum adsorption capacity of 37.38 mg g⁻¹. Kinetic analysis showed that the pseudo-nth-order model most accurately represented the adsorption mechanism. Thermodynamic evaluation confirmed that the process was spontaneous and exothermic. Overall, the kaolinite–alumina composite appears to be a promising and cost-effective adsorbent for the treatment of dye-contaminated wastewater.
- 1 March 2026
- Published by Konya Muhendislik Bilimleri Dergisi in Konya Journal of Engineering Sciences
- Vol. 14 (1) , 413-432
SYNTHESIS AND CHARACTERIZATION OF KAOLIN–ALUMINA COMPOSITE ADSORBENT FOR REMOVAL OF RHODAMINE B
In this study, a kaolin–alumina composite adsorbent was synthesized and characterized for the removal of Rhodamine B (RhB) from aqueous solutions. Kaolin clay was modified with Al₂O₃ using the sol–gel method to improve surface properties and enhance adsorption capacity. The resulting composite was characterized by SEM–EDX, XRD, FTIR, and N₂ adsorption–desorption analyses, which confirmed increased surface area and porosity compared to raw kaolin. Batch adsorption experiments were conducted to examine the effects of contact time, initial dye concentration, and adsorbent dosage on RhB removal efficiency. The adsorption process was optimized using Response Surface Methodology (RSM) with a Central Composite Design (CCD). Regression analysis indicated that the initial dye concentration was the most influential factor controlling removal efficiency. Equilibrium data were best described by the Sips isotherm model, with a maximum adsorption capacity of 37.38 mg g⁻¹. Kinetic analysis showed that the pseudo-nth-order model most accurately represented the adsorption mechanism. Thermodynamic evaluation confirmed that the process was spontaneous and exothermic. Overall, the kaolinite–alumina composite appears to be a promising and cost-effective adsorbent for the treatment of dye-contaminated wastewater.
- 9 February 2026
- Published by Wiley in ChemistrySelect
- Vol. 11 (6)
Valorization of Spent Bleaching Clay via Silica Modification for High‐Performance Rhodamine B Adsorption: Optimization, Isotherm, and Kinetic Analysis
This study investigated the valorization of spent bleaching clay (SBC) to produce high‐surface‐area adsorbents for dye removal. Unlike conventional regeneration routes that involve high‐temperature treatment and result in surface deterioration, the organic matter on SBC was replaced with cetyltrimethylammonium bromide, followed by silica modification of the interlayer structure. The obtained materials were compared with raw bleaching clay (RBC) and pyrolyzed bleaching clay (PBC). The surface areas of PBC and silica‐modified bleaching clay (Si‐BC) were 49.92 and 96.77 m 2 /g, respectively. A 3‐factor, 3‐level design was used to evaluate Rhodamine B (Rh‐B) removal performance. For all samples, removal efficiency decreased with increasing pH. Among the tested isotherms, the Khan model provided the best fit. Langmuir monolayer capacities were 230.8, 69.9, and 131.8 mg/g for RBC, PBC, and Si‐BC, respectively. Kinetic results indicated pseudo‐second‐order behavior for RBC, Elovich kinetics for PBC, and pseudo‐first‐order behavior for Si‐BC. Thermodynamic analysis showed that Rh‐B adsorption onto RBC and PBC was exothermic and spontaneous, whereas adsorption onto Si‐BC was endothermic but still spontaneous. Overall, silica modification significantly enhanced the structural properties and adsorption performance of SBC‐derived materials.
- 9 February 2026
- Published by Wiley in ChemistrySelect
- Vol. 11 (6)
Valorization of Spent Bleaching Clay via Silica Modification for High‐Performance Rhodamine B Adsorption: Optimization, Isotherm, and Kinetic Analysis
This study investigated the valorization of spent bleaching clay (SBC) to produce high‐surface‐area adsorbents for dye removal. Unlike conventional regeneration routes that involve high‐temperature treatment and result in surface deterioration, the organic matter on SBC was replaced with cetyltrimethylammonium bromide, followed by silica modification of the interlayer structure. The obtained materials were compared with raw bleaching clay (RBC) and pyrolyzed bleaching clay (PBC). The surface areas of PBC and silica‐modified bleaching clay (Si‐BC) were 49.92 and 96.77 m 2 /g, respectively. A 3‐factor, 3‐level design was used to evaluate Rhodamine B (Rh‐B) removal performance. For all samples, removal efficiency decreased with increasing pH. Among the tested isotherms, the Khan model provided the best fit. Langmuir monolayer capacities were 230.8, 69.9, and 131.8 mg/g for RBC, PBC, and Si‐BC, respectively. Kinetic results indicated pseudo‐second‐order behavior for RBC, Elovich kinetics for PBC, and pseudo‐first‐order behavior for Si‐BC. Thermodynamic analysis showed that Rh‐B adsorption onto RBC and PBC was exothermic and spontaneous, whereas adsorption onto Si‐BC was endothermic but still spontaneous. Overall, silica modification significantly enhanced the structural properties and adsorption performance of SBC‐derived materials.
- Open Access
- 6 February 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1) , 7615
A new anti-soiling approach based on oleic acid-modified Al₂O₃ nanocoatings for photovoltaic panels
This study investigates the effectiveness of oleic acid-functionalized Al₂O₃ nanoparticle thin-film coatings in reducing dust-induced performance losses in photovoltaic (PV) systems. Coating performance was evaluated using spraying durations of 20, 40, and 80 s and oleic acid concentrations between 0.5% and 4.5%. Characterization results indicated that the optimal coating was obtained using a 40-second spraying time and a 1.5% oleic acid concentration, resulting in a 231 nm film thickness and a water contact angle of 75.47°, confirming improved surface properties. Laboratory experiments showed that the coated surfaces accumulated, on average, 6.9 mg/cm² less dust than uncoated ones, preventing 0.6–3.0% efficiency loss. A central composite design (CCD) approach was applied by considering temperature, relative humidity, wind speed, and initial dust load as environmental variables. Field tests performed under real outdoor conditions demonstrated that coated Mini-PV modules produced 0.5–0.8 W more daily energy compared to uncoated panels. However, environmental factors such as temperatures above 35 °C and the presence of hydrophobic pollutants reduced long-term coating effectiveness. Overall, the findings indicate that oleic acid-modified Al₂O₃ coatings may serve as a passive strategy for mitigating dust accumulation and enhancing PV panel performance under certain conditions.
- 6 February 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1) , 7615
Open AccessA new anti-soiling approach based on oleic acid-modified Al₂O₃ nanocoatings for photovoltaic panels
This study investigates the effectiveness of oleic acid-functionalized Al₂O₃ nanoparticle thin-film coatings in reducing dust-induced performance losses in photovoltaic (PV) systems. Coating performance was evaluated using spraying durations of 20, 40, and 80 s and oleic acid concentrations between 0.5% and 4.5%. Characterization results indicated that the optimal coating was obtained using a 40-second spraying time and a 1.5% oleic acid concentration, resulting in a 231 nm film thickness and a water contact angle of 75.47°, confirming improved surface properties. Laboratory experiments showed that the coated surfaces accumulated, on average, 6.9 mg/cm² less dust than uncoated ones, preventing 0.6–3.0% efficiency loss. A central composite design (CCD) approach was applied by considering temperature, relative humidity, wind speed, and initial dust load as environmental variables. Field tests performed under real outdoor conditions demonstrated that coated Mini-PV modules produced 0.5–0.8 W more daily energy compared to uncoated panels. However, environmental factors such as temperatures above 35 °C and the presence of hydrophobic pollutants reduced long-term coating effectiveness. Overall, the findings indicate that oleic acid-modified Al₂O₃ coatings may serve as a passive strategy for mitigating dust accumulation and enhancing PV panel performance under certain conditions.
- Open Access
- 13 April 2024
- Published by Springer Nature in Adsorption
- Vol. 30 (6) , 729-746
Synthesis of Na-Alginate templated Montmorillonite-Silica Composite as adsorbent for removal of Rhodamine B
In this study, mesoporous Montmorillonite-Silica composites prepared by using different amount Alginate as sacrificial template, for removal of Rhodamine B is investigated. By alternating Alginate amount it is aimed to switch the porosity of adsorbents thus the adsorption capacities of adsorbents. Synthesized adsorbents had been characterized by using Scanning Electron Microscopy, X-ray diffraction, Fourier transform infrared spectroscopy and N2-Ads/Des techniques. It is observed that beside the decrease in the micropore volume, the total pore volume of the adsorbents increased with the increasing of used Alginate amount. The total pore volumes of adsorbents synthesized with different Clay/Alginate ratio (10, 5, 1) were found as 0.116, 0.172, and 0.178 cm3/g, respectively. Batch adsorption studies showed that the maximum removal efficiencies were obtained at acidic conditions and the adsorbents had better fit with Freundlich isotherm. Qm values obtained from Langmuir isotherm were found as 24.47, 31.97 and 28.48 mg/g for synthesized adsorbents. Also, adsorption kinetic studies showed that for all adsorbents, experimental data had good fit to the pseudo-second order kinetics model. The model parameters were found as 5.9,6.3 and 6.5 (10–3 g/ (mg min). Thermodynamic parameters were also investigated in the study. Negative ∆Go values pointed out that the adsorption of RhB onto synthesized adsorbents was favorable process. Positive values of ∆Ho and ΔS indicated that the adsorption of RhB on adsorbents were endothermic and rising of randomness during the adsorption of RhB on the surface of the adsorbent. Adsorbents could be recovered at least five times without significant decrease in adsorption capacity.
- 13 April 2024
- Published by Springer Nature in Adsorption
- Vol. 30 (6) , 729-746
Open AccessSynthesis of Na-Alginate templated Montmorillonite-Silica Composite as adsorbent for removal of Rhodamine B
In this study, mesoporous Montmorillonite-Silica composites prepared by using different amount Alginate as sacrificial template, for removal of Rhodamine B is investigated. By alternating Alginate amount it is aimed to switch the porosity of adsorbents thus the adsorption capacities of adsorbents. Synthesized adsorbents had been characterized by using Scanning Electron Microscopy, X-ray diffraction, Fourier transform infrared spectroscopy and N2-Ads/Des techniques. It is observed that beside the decrease in the micropore volume, the total pore volume of the adsorbents increased with the increasing of used Alginate amount. The total pore volumes of adsorbents synthesized with different Clay/Alginate ratio (10, 5, 1) were found as 0.116, 0.172, and 0.178 cm3/g, respectively. Batch adsorption studies showed that the maximum removal efficiencies were obtained at acidic conditions and the adsorbents had better fit with Freundlich isotherm. Qm values obtained from Langmuir isotherm were found as 24.47, 31.97 and 28.48 mg/g for synthesized adsorbents. Also, adsorption kinetic studies showed that for all adsorbents, experimental data had good fit to the pseudo-second order kinetics model. The model parameters were found as 5.9,6.3 and 6.5 (10–3 g/ (mg min). Thermodynamic parameters were also investigated in the study. Negative ∆Go values pointed out that the adsorption of RhB onto synthesized adsorbents was favorable process. Positive values of ∆Ho and ΔS indicated that the adsorption of RhB on adsorbents were endothermic and rising of randomness during the adsorption of RhB on the surface of the adsorbent. Adsorbents could be recovered at least five times without significant decrease in adsorption capacity.
- 4 April 2022
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 33 (15) , 11896-11905
Uridine as additive in antisolvent for improving performance and reproducibility of perovskite solar cells
- 4 April 2022
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 33 (15) , 11896-11905
Uridine as additive in antisolvent for improving performance and reproducibility of perovskite solar cells
- 23 December 2021
- Published by Bentham Science Publishers Ltd. in Anti-Cancer Agents in Medicinal Chemistry
- Vol. 21 (18) , 2553-2562
Synthesis of Silica Based Nanoparticles Against the Proliferation of Human Prostate Cancer
Background: Prostate cancer(PCa) has the second-highest morbidity and mortality rates in men. Possessing facile surface chemistry and unique optical properties make silica nanoparticles(SiO2-NPs) promising cancer therapy materials. Objective: This study aimed to investigate the effects of SiO2-NPs and their derivatives, including SiNP-NH2, SiNP-Cl, and SiNP-SH against PCa and clarify their molecular mechanism on cell death, gene, and protein expressions. Methods: Following the synthesis and derivation of SiO2-NPs, their characterization was carried out using TEM, DLS, BET, and FT-IR. Cytotoxic properties of the compounds were investigated against different human cancerous cells, including HUH-7, A549, DLD-1, HeLa, NCI-H295R, and PC-3, as well as human healthy epithelium cell line PNT1A. Results: SiNP-NH2, SiNP-Cl, and SiNP-SH dose-dependently inhibited the proliferation of PC-3 cells with an IC50 value as 55.46 μg/mL, 55.09 μg/mL and 72.89 μg/mL, respectively. SiNP-SH significantly(p2-NPs and its derivatives. Conclusion: Our results demonstrated that –SH functioned SiO2-NPs can prevent the proliferation of human PCa by increasing apoptosis by upregulating gene and protein expression of p53(TP53) as well as caspase-3, caspase-9, and caspase-12 in the apoptotic pathway. Besides, the increased level of Smad-4 has also implicated the decreased cell proliferation. Hence, low sized SiNP-SH nanoparticles might be a suitable candidate for the treatment of human PCa.
- 23 December 2021
- Published by Bentham Science Publishers Ltd. in Anti-Cancer Agents in Medicinal Chemistry
- Vol. 21 (18) , 2553-2562
Synthesis of Silica Based Nanoparticles Against the Proliferation of Human Prostate Cancer
Background: Prostate cancer(PCa) has the second-highest morbidity and mortality rates in men. Possessing facile surface chemistry and unique optical properties make silica nanoparticles(SiO2-NPs) promising cancer therapy materials. Objective: This study aimed to investigate the effects of SiO2-NPs and their derivatives, including SiNP-NH2, SiNP-Cl, and SiNP-SH against PCa and clarify their molecular mechanism on cell death, gene, and protein expressions. Methods: Following the synthesis and derivation of SiO2-NPs, their characterization was carried out using TEM, DLS, BET, and FT-IR. Cytotoxic properties of the compounds were investigated against different human cancerous cells, including HUH-7, A549, DLD-1, HeLa, NCI-H295R, and PC-3, as well as human healthy epithelium cell line PNT1A. Results: SiNP-NH2, SiNP-Cl, and SiNP-SH dose-dependently inhibited the proliferation of PC-3 cells with an IC50 value as 55.46 μg/mL, 55.09 μg/mL and 72.89 μg/mL, respectively. SiNP-SH significantly(p2-NPs and its derivatives. Conclusion: Our results demonstrated that –SH functioned SiO2-NPs can prevent the proliferation of human PCa by increasing apoptosis by upregulating gene and protein expression of p53(TP53) as well as caspase-3, caspase-9, and caspase-12 in the apoptotic pathway. Besides, the increased level of Smad-4 has also implicated the decreased cell proliferation. Hence, low sized SiNP-SH nanoparticles might be a suitable candidate for the treatment of human PCa.
- 1 September 2021
- Published by Elsevier in Materials Today Energy
- Vol. 21
A general review on the thiospinels and their energy applications
- 1 September 2021
- Published by Elsevier in Materials Today Energy
- Vol. 21
A general review on the thiospinels and their energy applications