LKLucas W. Koester

Lucas W. Koester

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lucas W. Koester has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Inspection of Electronics Components for Cryogenic Temperature Operations

    by N. Poonthottathil, F. Krennrich, A. Weinstein, J. Eisch, L. J. Bond, D. Barnard, Z. Zhang, L. Koester

    Electronics operating at cryogenic temperatures play a critical role in future science experiments and space exploration programs. The Deep Underground Neutrino Experiment (DUNE) uses a cold electronics system for data taking. Specifically, it utilizes custom-designed Application Specific Integrated Circuits (ASICs). The main challenge is that these circuits will be immersed in liquid Argon and that they need to function for 20+ years without any access. Ensuring quality is critical, and issues may arise due to thermal stress, packaging, and manufacturing-related defects: if undetected, these could lead to long-term reliability and performance problems. This paper reports an investigation into non-destructive evaluation techniques to assess their potential use in a comprehensive quality control process during prototyping, testing, and commissioning of the DUNE cold electronics system. Scanning acoustic microscopy (SAM) was used to investigate permanent structural changes in the ASICs associated with thermal cycling between room and cryogenic temperatures. Data are assessed using a correlation analysis, which can detect even minimal changes happening inside the ASICs.


  • Open Access

    Investigation of Nondestructive Testing Methods for Friction Stir Welding

    by Hossein Taheri, Margaret Kilpatrick, Matthew Norvalls, Warren J. Harper, Lucas W. Koester, Timothy Bigelow, Leonard J. Bond

    Friction stir welding is a method of materials processing that enables the joining of similar and dissimilar materials. The process, as originally designed by The Welding Institute (TWI), provides a unique approach to manufacturing—where materials can be joined in many designs and still retain mechanical properties that are similar to, or greater than, other forms of welding. This process is not free of defects that can alter, limit, and occasionally render the resulting weld unusable. Most common amongst these defects are kissing bonds, wormholes and cracks that are often hidden from visual inspection. To identify these defects, various nondestructive testing methods are being used. This paper presents background to the process of friction stir welding and identifies major process parameters that affect the weld properties, the origin, and types of defects that can occur, and potential nondestructive methods for ex-situ detection and in-situ identification of these potential defects, which can then allow for corrective action to be taken.


  • In Situ Additive Manufacturing Process Monitoring With an Acoustic Technique: Clustering Performance Evaluation Using K-Means Algorithm

    by Hossein Taheri, Lucas W. Koester, Timothy A. Bigelow, Eric J. Faierson, Leonard J. Bond

    Additive manufacturing (AM) is based on layer-by-layer addition of materials. It gives design flexibility and potential to decrease costs and manufacturing lead time. Because the AM process involves incremental deposition of materials, it provides unique opportunities to investigate the material quality as it is deposited. Development of in situ monitoring methodologies is a vital part of the assessment of process performance and understanding of defects formation. In situ process monitoring provides the capability for early detection of process faults and defects. Due to the sensitivity of AM processes to different factors such as laser and material properties, any changes in aspects of the process can potentially have an impact on the part quality. As a result, in-process monitoring of AM is crucial to assure the quality, integrity, and safety of AM parts. There are various sensors and techniques that have been used for in situ process monitoring. In this work, acoustic signatures were used for in situ monitoring of the metal direct energy deposition (DED) AM process operating under different process conditions. Correlations were demonstrated between metrics and various process conditions. Demonstrated correlation between the acoustic signatures and the manufacturing process conditions shows the capability of acoustic technique for in situ monitoring of the additive manufacturing process. To identify the different process conditions, a new approach of K-means statistical clustering algorithm is used for the classification of different process conditions, and quantitative evaluation of the classification performance in terms of cohesion and isolation of the clusters. The identified acoustic signatures, quantitative clustering approach, and the achieved classification efficiency demonstrate potential for use in in situ acoustic monitoring and quality control for the additive manufacturing process.


  • In-situ acoustic signature monitoring in additive manufacturing processes

    by Lucas W. Koester, Hossein Taheri, Timothy A. Bigelow, Leonard J. Bond, Eric J. Faierson

    Additive manufacturing is a rapidly maturing process for the production of complex metallic, ceramic, polymeric, and composite components. The processes used are numerous, and with the complex geometries involved this can make quality control and standardization of the process and inspection difficult. Acoustic emission measurements have been used previously to monitor a number of processes including machining and welding. The authors have identified acoustic signature measurement as a potential means of monitoring metal additive manufacturing processes using process noise characteristics and those discrete acoustic emission events characteristic of defect growth, including cracks and delamination. Results of acoustic monitoring for a metal additive manufacturing process (directed energy deposition) are reported. The work investigated correlations between acoustic emissions and process noise with variations in machine state and deposition parameters, and provided proof of concept data that such correlations do exist.


  • NDE of additively manufactured components with embedded defects (reference standards) using conventional and advanced ultrasonic methods

    by L. Koester, R. A. Roberts, D. J. Barnard, S. Chakrapani, S. Singh, R. Hogan, L. J. Bond

    Additive manufacturing provides a unique opportunity to embed defects of known size and shape to produce reference samples for inspection and quality control purposes. This paper reports defect detectability studies with cylindrical additively manufactured cobalt-chromium alloy specimens which contain defects of known sizes and distributions. The specimens were characterized using immersion, synthetic aperture focusing (SAFT), phased array, and nonlinear ultrasonic techniques. Results include detectability, signal to noise ratios, and comparison of results between the methods and what is believed to be the first determination of a non-linearity (beta) parameter for an additively manufactured material. The results indicate that additive manufacturing provides a valuable method to produce reference samples, though additional work is required to validate the shape and morphology of the defects specified.


  • Additive manufacturing metrology: State of the art and needs assessment

    by L. Koester, H. Taheri, L. J. Bond, D. Barnard, J. Gray

    Additive manufacturing (AM) is a technology that first emerged in 1987 with stereolithography (SL) of plastic materials from 3D Systems. It saw light use for rapid prototyping and very low volume production for a number of years. However, in the past few years AM of metallic materials has become a practical fabrication technology, use is rapidly increasing and is projected to continue with double digit growth in coming years. The promise and flexibility shown by AM has spurred efforts to begin standardization of this type of process. This paper provides an assessment of the state of the art for in-situ process monitoring of AM processes with an emphasis on the production of metallic components. It is seen that with the implementation of proper process control there is potential to create reliable and reproducible materials and geometries previously unachievable using metal removal based means of production. A reliable methodology for detection and control of microstructure and defects would be of great value in terms of enabling broader AM utilization.