Alexey S. Lebedev
Research Subjects
Alexey S. Lebedev has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
V. N. Anfilogov
South Ural Federal Research Center of Mineralogy and Geoecology, Ural Branch, Russian Academy of Sciences, Ilmen State Reserve, 456317, Miass, Chelyabinsk oblast, Russia
4 shared publications- Aleksej A. Trofimov
Scientific Laboratory of the Electrochemical Devices and Materials, Ural Federal University, Mira St. 28, 620002 Yekaterinburg, Russia
2 shared publications - Anastasia M. Leonova
Scientific Laboratory of the Electrochemical Devices and Materials, Ural Federal University, Mira St. 28, 620002 Yekaterinburg, Russia
2 shared publications - Andrey V. Suzdaltsev
Ural Federal University, Yekaterinburg, Russia
2 shared publications E. A. Trofimov
Federal State Autonomous Educational Institution of Higher Education "South Ural State University" (National Research University)
2 shared publications- Natalia M. Leonova
Ural Federal University
2 shared publications
Latest Publications
- 1 January 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (6) , 7459-7467
Corrosion of refractory materials in borosilicate melts for high-level radioactive waste vitrification
- 1 January 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (6) , 7459-7467
Corrosion of refractory materials in borosilicate melts for high-level radioactive waste vitrification
- Open Access
- 21 March 2023
- Published by Saratov State University in Electrochemical Energetics
- Vol. 23 (1)
C/SiC-based anodes for lithium-ion current sources
Compositions of ultrafine Si and C particles are promising anode materials for lithium-ion power sources with improved energy characteristics. In the work, samples of lithium-ion power sources with an anode made of ultrafine SiC fibers, as well as mixtures of SiC fibers with graphite (C/SiC) and electrolytically deposited submicron silicon fibers (C/Si/SiC) were fabricated and studied for energy characteristics. The working ability of the mixtures obtained during lithiation/delithiation was shown, and the main energy characteristics of the investigated anode half-cells were determined. After 100 cycles, the SiC anode reached a discharge capacity of 180 and 138 mA·h/g at a charge current of C/20 and C, respectively. Anodes made of mixtures (wt%) 29.5C-70.5SiC and 50Si-14.5C-35.5SiC show discharge capacities of 328 and 400 mA·h/g at a charge current of C/2. The Coulomb efficiency of all samples was above 99%.
- 21 March 2023
- Published by Saratov State University in Electrochemical Energetics
- Vol. 23 (1)
Open AccessC/SiC-based anodes for lithium-ion current sources
Compositions of ultrafine Si and C particles are promising anode materials for lithium-ion power sources with improved energy characteristics. In the work, samples of lithium-ion power sources with an anode made of ultrafine SiC fibers, as well as mixtures of SiC fibers with graphite (C/SiC) and electrolytically deposited submicron silicon fibers (C/Si/SiC) were fabricated and studied for energy characteristics. The working ability of the mixtures obtained during lithiation/delithiation was shown, and the main energy characteristics of the investigated anode half-cells were determined. After 100 cycles, the SiC anode reached a discharge capacity of 180 and 138 mA·h/g at a charge current of C/20 and C, respectively. Anodes made of mixtures (wt%) 29.5C-70.5SiC and 50Si-14.5C-35.5SiC show discharge capacities of 328 and 400 mA·h/g at a charge current of C/2. The Coulomb efficiency of all samples was above 99%.
- Open Access
- 9 January 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (2) , 901
Synthesis of C/SiC Mixtures for Composite Anodes of Lithium-Ion Power Sources
Nowadays, research aimed at the development of materials with increased energy density for lithium-ion batteries are carried out all over the world. Composite anode materials based on Si and C ultrafine particles are considered promising due to their high capacity. In this work, a new approach for carbothermal synthesis of C/SiC composite mixtures with SiC particles of fibrous morphology with a fiber diameter of 0.1–2.0 μm is proposed. The synthesis was carried out on natural raw materials (quartz and graphite) without the use of complex equipment and an argon atmosphere. Using the proposed method, C/SiC mixture as well as pure SiC were synthesized and used to manufacture anode half-cells of lithium-ion batteries. The potential use of the resulting mixtures as anode material for lithium-ion battery was shown. Energy characteristics of the mixtures were determined. After 100 cycles, pure SiC reached a discharge capacity of 180 and 138 mAh g−1 at a current of C/20 and C, respectively, and for the mixtures of (wt%) 29.5C–70.5 SiC and 50Si–14.5C–35.5SiC discharge capacity of 328 and 400 mAh g−1 at a current of C/2 were achieved. The Coulombic efficiency of the samples during cycling was over 99%.
- 9 January 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (2) , 901
Open AccessSynthesis of C/SiC Mixtures for Composite Anodes of Lithium-Ion Power Sources
Nowadays, research aimed at the development of materials with increased energy density for lithium-ion batteries are carried out all over the world. Composite anode materials based on Si and C ultrafine particles are considered promising due to their high capacity. In this work, a new approach for carbothermal synthesis of C/SiC composite mixtures with SiC particles of fibrous morphology with a fiber diameter of 0.1–2.0 μm is proposed. The synthesis was carried out on natural raw materials (quartz and graphite) without the use of complex equipment and an argon atmosphere. Using the proposed method, C/SiC mixture as well as pure SiC were synthesized and used to manufacture anode half-cells of lithium-ion batteries. The potential use of the resulting mixtures as anode material for lithium-ion battery was shown. Energy characteristics of the mixtures were determined. After 100 cycles, pure SiC reached a discharge capacity of 180 and 138 mAh g−1 at a current of C/20 and C, respectively, and for the mixtures of (wt%) 29.5C–70.5 SiC and 50Si–14.5C–35.5SiC discharge capacity of 328 and 400 mAh g−1 at a current of C/2 were achieved. The Coulombic efficiency of the samples during cycling was over 99%.
- 1 January 2020
- Published by Pleiades Publishing Ltd in Inorganic Materials
- Vol. 56 (1) , 20-27
Carbothermal Synthesis, Properties, and Structure of Ultrafine SiC Fibers
This paper briefly reports the results of the carbothermal synthesis of SiC from natural graphite and quartz in a reactor with a self-organizing protective CO–SiO atmosphere and in argon at a temperature between 1600 and 1650°C. The chemical and phase compositions of the synthesized SiC have been determined using chemical analysis, X-ray diffraction, and Raman spectroscopy. We have found conditions for obtaining the 6H-SiC or 3C-SiC polytype with a total impurity concentration within 0.3 ppm (with no allowance for the SiO2 film). The structural properties and particle size of the SiC powder obtained in a reactor with a CO–SiO atmosphere have been studied using scanning electron microscopy, laser diffraction, ellipsometry, and mathematical description of physical adsorption. The SiC powder has been shown to consist of platelike agglomerates in which the average particle size (40 to 60 μm) and shape have been inherited from the graphite used in the synthesis process and which have a specific surface area of 10.4 m2/g. The agglomerates have a fibrous structure, with fiber diameters from 100 to 300 nm (the thickness of the forming SiO2 film is 53 ± 2 nm).
- 1 January 2020
- Published by Pleiades Publishing Ltd in Inorganic Materials
- Vol. 56 (1) , 20-27
Carbothermal Synthesis, Properties, and Structure of Ultrafine SiC Fibers
This paper briefly reports the results of the carbothermal synthesis of SiC from natural graphite and quartz in a reactor with a self-organizing protective CO–SiO atmosphere and in argon at a temperature between 1600 and 1650°C. The chemical and phase compositions of the synthesized SiC have been determined using chemical analysis, X-ray diffraction, and Raman spectroscopy. We have found conditions for obtaining the 6H-SiC or 3C-SiC polytype with a total impurity concentration within 0.3 ppm (with no allowance for the SiO2 film). The structural properties and particle size of the SiC powder obtained in a reactor with a CO–SiO atmosphere have been studied using scanning electron microscopy, laser diffraction, ellipsometry, and mathematical description of physical adsorption. The SiC powder has been shown to consist of platelike agglomerates in which the average particle size (40 to 60 μm) and shape have been inherited from the graphite used in the synthesis process and which have a specific surface area of 10.4 m2/g. The agglomerates have a fibrous structure, with fiber diameters from 100 to 300 nm (the thickness of the forming SiO2 film is 53 ± 2 nm).
- Open Access
- 16 May 2019
- Published by The Russian Academy of Sciences in Доклады Академии наук
- Vol. 484 (5) , 559-562
Thermodynamic analysis of the interaction of components in the Si–C–O system in the carbothermic synthesis of silicon carbide
Phase equilibria in the Si–C–O system at temperatures of 1400–1700°C were modeled to theoretically determine the optimal conditions for implementing our proposed method of carbothermic synthesis of silicon carbide in reactors with an autonomous protective atmosphere. It was found that, depending on the ratio between the initial components and the synthesis temperature, the equilibrium products of the synthesis can be various combinations of silicon carbide, a gas phase, residual amounts of silicon oxide and carbon, andan oxide melt formed at high temperatures.
- 16 May 2019
- Published by The Russian Academy of Sciences in Доклады Академии наук
- Vol. 484 (5) , 559-562
Open AccessThermodynamic analysis of the interaction of components in the Si–C–O system in the carbothermic synthesis of silicon carbide
Phase equilibria in the Si–C–O system at temperatures of 1400–1700°C were modeled to theoretically determine the optimal conditions for implementing our proposed method of carbothermic synthesis of silicon carbide in reactors with an autonomous protective atmosphere. It was found that, depending on the ratio between the initial components and the synthesis temperature, the equilibrium products of the synthesis can be various combinations of silicon carbide, a gas phase, residual amounts of silicon oxide and carbon, andan oxide melt formed at high temperatures.
- 1 February 2019
- Published by Pleiades Publishing Ltd in Doklady Chemistry
- Vol. 484 (2) , 41-43
Thermodynamic Analysis of the Interaction of Components in the Si–C–O System in the Carbothermic Synthesis of Silicon Carbide
Phase equilibria in the Si–C–O system at temperatures of 1400–1700°C were modeled to theoretically determine the optimal conditions for implementing our proposed method of carbothermic...
- 1 February 2019
- Published by Pleiades Publishing Ltd in Doklady Chemistry
- Vol. 484 (2) , 41-43
Thermodynamic Analysis of the Interaction of Components in the Si–C–O System in the Carbothermic Synthesis of Silicon Carbide
Phase equilibria in the Si–C–O system at temperatures of 1400–1700°C were modeled to theoretically determine the optimal conditions for implementing our proposed method of carbothermic...
- Open Access
- 1 January 2019
- Published by FSAEIHE South Ural State University (National Research University) in Bulletin of the South Ural State University Series "Chemistry"
- Vol. 11 (4) , 76-84
The Thermodynamic Modeling of the Phases Quantitative Relations in the Process of the Carbothermic β-SiС Synthesis
Термодинамическое моделирование количественных отношений фаз, сосуществующих в процессе карботермического синтеза β-SiC
- 1 January 2019
- Published by FSAEIHE South Ural State University (National Research University) in Bulletin of the South Ural State University Series "Chemistry"
- Vol. 11 (4) , 76-84
Open AccessThe Thermodynamic Modeling of the Phases Quantitative Relations in the Process of the Carbothermic β-SiС Synthesis
Термодинамическое моделирование количественных отношений фаз, сосуществующих в процессе карботермического синтеза β-SiC
- 1 May 2016
- Published by Pleiades Publishing Ltd in Doklady Chemistry
- Vol. 468 (1) , 156-158
Porous ceramics based on silicon carbide
- 1 May 2016
- Published by Pleiades Publishing Ltd in Doklady Chemistry
- Vol. 468 (1) , 156-158
Porous ceramics based on silicon carbide