Karthigeyan Annamalai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Karthigeyan Annamalai has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Mani Navaneethan
Nanotechnology Research Centre, SRM Institute of Science and Technology, Kattankulathur 603203, Tamil Nadu, India
5 shared publications Ajaijawahar Kaliyaperumal
Hydrogen Storage Materials and Nanosensors Laboratory, Department of Physics and Nanotechnology, College of Engineering and Technology, SRM Institute of Science and Technology, Kattankulathur, Chengalpattu, Tamil Nadu, INDIA, 603203
3 shared publicationsGokuladeepan Periyasamy
Hydrogen Storage Materials and Nanosensors Laboratory, Department of Physics and Nanotechnology, College of Engineering and Technology, SRM Institute of Science and Technology, Kattankulathur, Chengalpattu, Tamil Nadu, INDIA, 603203
3 shared publications- Karvannan Elamurugan
SRM Institute of Science and Technology
3 shared publications - Nivin Thulasibai Sasidharan
SRM Institute of Science and Technology
3 shared publications - Ajaijawahar Kaliyaperumal
SRM Institute of Science and Technology
2 shared publications
Latest Publications
- Open Access
- 12 November 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (43) , 20903-20918
Interface-engineered SnS/MoS 2 heterostructures for self-powered broadband photodetectors with rapid response
The SnS/MoS 2 device exhibits an enhanced, intensity-dependent photoresponse with rapid switching, demonstrating its potential for self-powered optoelectronic applications.
- 12 November 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (43) , 20903-20918
Open AccessInterface-engineered SnS/MoS 2 heterostructures for self-powered broadband photodetectors with rapid response
The SnS/MoS 2 device exhibits an enhanced, intensity-dependent photoresponse with rapid switching, demonstrating its potential for self-powered optoelectronic applications.
- 6 November 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
Hot-Pressed SnS/rGO Electrodes for High-Power Asymmetric Supercapacitors
Herein, we present the rational engineering of SnS/reduced graphene oxide (rGO) composites to enhance pseudocapacitance through carrier concentration optimization. The orthorhombic pnma-based SnS showed transitions from p- to n-type transport with the addition of rGO. This leads to changes in the bandgap, Fermi levels, conductivity, and diffusion coefficient to achieve the desired properties. The SnS/rGO 5% composite illustrates a specific capacitance of 200 F/g at 1 A/g, three times higher than that of pure SnS owing to its extrinsic pseudocapacitive nature and diffusion-controlled kinetics. The half-cell demonstrates exceptional capacitance retention of 93% over 1200 cycles, attributed to the conducting framework provided by rGO. In a full-cell configuration, using SnS/rGO 5% as the anode and activated carbon as the cathode, an operational voltage of 1.2 V is obtained. This configuration delivers a specific capacitance of 100 F/g at 1 A/g and maintains a capacity retention of 88% at 40 A/g for 5000 cycles. The energy density is 20.081 Wh/kg, and the power density is 22,454 W/kg for the asymmetric SnS/rGO||activated carbon (AC) device. Furthermore, two identical full cells can power a red LED for 128 s, an orange LED for 83 s, and a green LED for 61 s, demonstrating their practical potential in energy storage applications.
- 6 November 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
Hot-Pressed SnS/rGO Electrodes for High-Power Asymmetric Supercapacitors
Herein, we present the rational engineering of SnS/reduced graphene oxide (rGO) composites to enhance pseudocapacitance through carrier concentration optimization. The orthorhombic pnma-based SnS showed transitions from p- to n-type transport with the addition of rGO. This leads to changes in the bandgap, Fermi levels, conductivity, and diffusion coefficient to achieve the desired properties. The SnS/rGO 5% composite illustrates a specific capacitance of 200 F/g at 1 A/g, three times higher than that of pure SnS owing to its extrinsic pseudocapacitive nature and diffusion-controlled kinetics. The half-cell demonstrates exceptional capacitance retention of 93% over 1200 cycles, attributed to the conducting framework provided by rGO. In a full-cell configuration, using SnS/rGO 5% as the anode and activated carbon as the cathode, an operational voltage of 1.2 V is obtained. This configuration delivers a specific capacitance of 100 F/g at 1 A/g and maintains a capacity retention of 88% at 40 A/g for 5000 cycles. The energy density is 20.081 Wh/kg, and the power density is 22,454 W/kg for the asymmetric SnS/rGO||activated carbon (AC) device. Furthermore, two identical full cells can power a red LED for 128 s, an orange LED for 83 s, and a green LED for 61 s, demonstrating their practical potential in energy storage applications.
- 11 August 2026
- Published by Wiley in Advanced Materials Technologies
- Vol. 11 (20)
High‐Speed Broadband Self‐Powered Photodetectors Based on Tin Sulfide/Graphitic Carbon Nitride Composites for Environmental Monitoring
Developing photodetectors with rapid response, broad spectral coverage, and self‐powered operation remains a major challenge since they are mutually exclusive. This challenge is tackled by compositing tin sulfide (SnS) and graphitic carbon nitride (g‐C 3 N 4 ) through a controlled incorporation of g‐C 3 N 4 (0.5–15 wt.%), to modulate depletion width, band alignment, and surface defects. The optimized composite (1 wt.% g‐ C 3 N 4 , named SG‐1) exhibits broadband absorption spanning 250–1400 nm, a strong zero‐bias photocurrent (2.24 µA), and rapid rise/decay times of 0.48/0.47 ms, which are among the fastest reported for SnS‐based photodetectors. Scanning Kelvin probe (SKP) analysis reveals a pronounced illumination‐induced work‐function modulation (ΔWF ≈ 0.23 eV), confirming enhanced built‐in field and reduced surface defect density. Correspondingly, SG‐1 achieves a responsivity of 2.8 mA/W and a detectivity of 1.9 × 10 9 Jones that is ∼4× greater than pristine SnS. The combined optical, electrical, and contact potential difference (CPD) establishes that g‐C 3 N 4 ‐driven depletion modulation is instrumental for rapid carrier dynamics. These results validate SnS/g‐C 3 N 4 composites as promising candidates for next‐generation ultrabroadband, low‐power, and high‐speed photodetectors for environmental sensing, optical communication, and IoT‐integrated systems.
- 11 August 2026
- Published by Wiley in Advanced Materials Technologies
- Vol. 11 (20)
High‐Speed Broadband Self‐Powered Photodetectors Based on Tin Sulfide/Graphitic Carbon Nitride Composites for Environmental Monitoring
Developing photodetectors with rapid response, broad spectral coverage, and self‐powered operation remains a major challenge since they are mutually exclusive. This challenge is tackled by compositing tin sulfide (SnS) and graphitic carbon nitride (g‐C 3 N 4 ) through a controlled incorporation of g‐C 3 N 4 (0.5–15 wt.%), to modulate depletion width, band alignment, and surface defects. The optimized composite (1 wt.% g‐ C 3 N 4 , named SG‐1) exhibits broadband absorption spanning 250–1400 nm, a strong zero‐bias photocurrent (2.24 µA), and rapid rise/decay times of 0.48/0.47 ms, which are among the fastest reported for SnS‐based photodetectors. Scanning Kelvin probe (SKP) analysis reveals a pronounced illumination‐induced work‐function modulation (ΔWF ≈ 0.23 eV), confirming enhanced built‐in field and reduced surface defect density. Correspondingly, SG‐1 achieves a responsivity of 2.8 mA/W and a detectivity of 1.9 × 10 9 Jones that is ∼4× greater than pristine SnS. The combined optical, electrical, and contact potential difference (CPD) establishes that g‐C 3 N 4 ‐driven depletion modulation is instrumental for rapid carrier dynamics. These results validate SnS/g‐C 3 N 4 composites as promising candidates for next‐generation ultrabroadband, low‐power, and high‐speed photodetectors for environmental sensing, optical communication, and IoT‐integrated systems.
- 24 April 2026
- Published by Springer Nature in Journal of Materials Research
- Vol. 41 (8) , 1228-1241
Structural defects and Urbach energy modulation in Ba-doped MXene for enhanced photocatalytic MB dye degradation in visible light
- 24 April 2026
- Published by Springer Nature in Journal of Materials Research
- Vol. 41 (8) , 1228-1241
Structural defects and Urbach energy modulation in Ba-doped MXene for enhanced photocatalytic MB dye degradation in visible light
- 9 January 2026
- Published by Elsevier in Thin Solid Films
- Vol. 834
Al-doped ZnO thin films for ultraviolet photodetection and solution processed PN junction formation
- 9 January 2026
- Published by Elsevier in Thin Solid Films
- Vol. 834
Al-doped ZnO thin films for ultraviolet photodetection and solution processed PN junction formation
- 7 November 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (31) , 1-25
Defect-rich 2D Ti3C2Tx MXene for rapid methylene blue degradation under visible light
- 7 November 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (31) , 1-25
Defect-rich 2D Ti3C2Tx MXene for rapid methylene blue degradation under visible light
- 26 September 2025
- Published by World Scientific Pub Co Pte Ltd in International Journal of Computational Materials Science and Engineering
Heterostructuring, electronic and hydrogen storage properties of Boron-, Carbon- and Nitrogen-based 2D nanomaterials-A DFT study
Computationally, two-dimensional layers of boron (B), carbon (C), and nitrogen (N), referred to as borophene, graphene, and nitrogene, respectively, can form stable monolayers and van der Waals heterostructures without requiring close lattice matching, provided the atomic species are adjacent in the periodic table. The heterostructures of graphene with borophene, nitrogene and h-BN layer are designed. The heterostructures graphene/borophene and graphene/nitrogene behave like a surface-doped system. Understanding the disorder in these two-dimensional systems may be helpful for device fabrication. The graphene-hBN heterostructure is quite interesting and may have more important applications compared to the other two heterostructures. With improved features, the current graphene and 2D h-BN van der Waals heterostructure presents a special chance to create novel materials with distinct characteristics as the foundation for developing new functional materials. The heterostructure’s geometrical forms and energy of atoms and molecules with varied bonds submerged in van der Waals forces are precisely predicted. Stability and synergistic effects are created by the good interaction between the multilayers, which raises the gravimetric capacity and the adsorption energy of H2 molecules. The graphene is functionalized with a different number of MgH2 and then hydrogenated to arrive at a balance between the binding of H2 and the wt.%. The study’s findings can help build and optimize heterostructures for high-capacity, effective hydrogen storage, advancing the development of sustainable and clean energy solutions.
- 26 September 2025
- Published by World Scientific Pub Co Pte Ltd in International Journal of Computational Materials Science and Engineering
Heterostructuring, electronic and hydrogen storage properties of Boron-, Carbon- and Nitrogen-based 2D nanomaterials-A DFT study
Computationally, two-dimensional layers of boron (B), carbon (C), and nitrogen (N), referred to as borophene, graphene, and nitrogene, respectively, can form stable monolayers and van der Waals heterostructures without requiring close lattice matching, provided the atomic species are adjacent in the periodic table. The heterostructures of graphene with borophene, nitrogene and h-BN layer are designed. The heterostructures graphene/borophene and graphene/nitrogene behave like a surface-doped system. Understanding the disorder in these two-dimensional systems may be helpful for device fabrication. The graphene-hBN heterostructure is quite interesting and may have more important applications compared to the other two heterostructures. With improved features, the current graphene and 2D h-BN van der Waals heterostructure presents a special chance to create novel materials with distinct characteristics as the foundation for developing new functional materials. The heterostructure’s geometrical forms and energy of atoms and molecules with varied bonds submerged in van der Waals forces are precisely predicted. Stability and synergistic effects are created by the good interaction between the multilayers, which raises the gravimetric capacity and the adsorption energy of H2 molecules. The graphene is functionalized with a different number of MgH2 and then hydrogenated to arrive at a balance between the binding of H2 and the wt.%. The study’s findings can help build and optimize heterostructures for high-capacity, effective hydrogen storage, advancing the development of sustainable and clean energy solutions.
- 19 August 2025
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 9 (17) , 4649-4659
Carrier–phonon coupling driven enhanced thermoelectric performance of Sn-substituted bismuth sulphide for intermediate-temperature applications
Sn substitution in Bi2S3 gives a significantly optimized power factor of 192 μW m−1 K−2 with a low lattice thermal conductivity of 0.340 W m−1 K−1, resulting in an enhanced zT of 0.42 at 623 K for the Bi1.90Sn0.10S3 sample.
- 19 August 2025
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 9 (17) , 4649-4659
Carrier–phonon coupling driven enhanced thermoelectric performance of Sn-substituted bismuth sulphide for intermediate-temperature applications
Sn substitution in Bi2S3 gives a significantly optimized power factor of 192 μW m−1 K−2 with a low lattice thermal conductivity of 0.340 W m−1 K−1, resulting in an enhanced zT of 0.42 at 623 K for the Bi1.90Sn0.10S3 sample.
- 3 February 2025
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 335
Tailoring charge carrier dynamics for improved thermoelectric properties in nickel-incorporated Bi₂S₃
- 3 February 2025
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 335
Tailoring charge carrier dynamics for improved thermoelectric properties in nickel-incorporated Bi₂S₃
- 20 July 2024
- Published by Springer Nature in Journal of Materials Science
- Vol. 59 (30) , 13788-13804
Effects of graphite additives in polycrystalline SnS nanostructures for thermoelectric applications
- 20 July 2024
- Published by Springer Nature in Journal of Materials Science
- Vol. 59 (30) , 13788-13804
Effects of graphite additives in polycrystalline SnS nanostructures for thermoelectric applications