NSNivin Thulasibai Sasidharan

Nivin Thulasibai Sasidharan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nivin Thulasibai Sasidharan has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Hot-Pressed SnS/rGO Electrodes for High-Power Asymmetric Supercapacitors

    by Nivin Thulasibai Sasidharan, Vijay Vaiyapuri, Karvannan Elamurugan, Ajaijawahar Kaliyaperumal, Navaneethan Mani, Karthigeyan Annamalai

    Herein, we present the rational engineering of SnS/reduced graphene oxide (rGO) composites to enhance pseudocapacitance through carrier concentration optimization. The orthorhombic pnma-based SnS showed transitions from p- to n-type transport with the addition of rGO. This leads to changes in the bandgap, Fermi levels, conductivity, and diffusion coefficient to achieve the desired properties. The SnS/rGO 5% composite illustrates a specific capacitance of 200 F/g at 1 A/g, three times higher than that of pure SnS owing to its extrinsic pseudocapacitive nature and diffusion-controlled kinetics. The half-cell demonstrates exceptional capacitance retention of 93% over 1200 cycles, attributed to the conducting framework provided by rGO. In a full-cell configuration, using SnS/rGO 5% as the anode and activated carbon as the cathode, an operational voltage of 1.2 V is obtained. This configuration delivers a specific capacitance of 100 F/g at 1 A/g and maintains a capacity retention of 88% at 40 A/g for 5000 cycles. The energy density is 20.081 Wh/kg, and the power density is 22,454 W/kg for the asymmetric SnS/rGO||activated carbon (AC) device. Furthermore, two identical full cells can power a red LED for 128 s, an orange LED for 83 s, and a green LED for 61 s, demonstrating their practical potential in energy storage applications.

  • Growth Temperature of Integrated 2D SnS Microrods with Sulfur Vacancies Enabling Ultrahigh Power Na-Ion Microbatteries

    by Nivin Thulasibai Sasidharan, Varun Karthik Murugesan, Rajesh Kumar, K. Kamala Bharathi, Karthigeyan Annamalai

    “Microbatteries” are known to be the key to device miniaturization, but the practicality associated with one such domain of SnS thin films in Na-ion microbatteries (Na-μBs) is limited by slow Na+ kinetics and cycling-induced pulverization. These issues are strongly affected by microstructure, crystallinity, and interface quality, which can be tuned through growth temperature; however, their correlation with electrochemical performance remains unclear. Herein, SnS thin films with a thickness of 86.76 ± 4 nm were prepared via hydrothermal-assisted thermal evaporation at varying growth substrate temperatures. The optimal film growth occurs at 200 °C under sulfur-deficient conditions, yielding a high areal discharge capacity of 55 μAh/cm2 at a high current density of 200 μA/cm2 and remarkable retention of 88.6% over 150 cycles. The CV and DFT analyses reveal the capacitive–diffusive kinetics and charge localization around sulfur in SnS, facilitating Na–S bonds in conversion alloying reactions. Furthermore, demonstrations of powering LEDs highlight the practical applicability of SnS thin films as anodes in Na-μBs.

  • Engineering Composite Electrochromic Materials’ Systems: From Interfacial Design to Multifunctional Intelligent Devices

    by Nikita Ahlawat, Jatin Boyat, Bhumika Sahu, Love Bansal, Hari Mohan Rai, Subin K. Chondath, Nivin Thulasibai Sasidharan, Rajesh Kumar

    The unique capability of electrochromic (EC) materials (ECMs) to reversibly modulate optical properties through electrical stimulation has positioned them at the forefront of adaptive and energy-efficient technologies. However, the widespread deployment of conventional EC systems (like inorganic, organic, organometallic, etc.) remains constrained by fundamental challenges, including limited electrical conductivity, insufficient cycling durability, and restricted functionality. This in turn limits the consequent devices’ performance. In response to these challenges, composite engineering has emerged as a transformative approach for tailoring EC performance through the synergistic integration of diverse material components. Through deliberate design of compositions, interfaces, and hierarchical structures, composite ECMs improve charge-transfer kinetics, optical contrast, and structural robustness. Recent advances in composite-based ECMs and devices are highlighted here with a focus on the design strategies and structure-performance relationships that underpin their improved functionality. Key developments in conducting polymer–metal-oxide composites, MXene-based heterostructures, quantum dot-modified systems, and plasmonic architectures capable of regulating both visible and infrared radiation are critically examined. The emerging convergence of electrochromism with energy storage, thermal regulation, and adaptive camouflage is further described as a promising route toward multifunctional intelligent systems. Finally, critical challenges related to interfacial stability, scalable manufacturing, sustainability, and performance evaluation are discussed, alongside future directions for next-generation EC technologies. Design insights for developing high-performance composite ECMs have been discussed that meet the growing demands of energy-efficient and adaptive optoelectronic applications.

  • High‐Speed Broadband Self‐Powered Photodetectors Based on Tin Sulfide/Graphitic Carbon Nitride Composites for Environmental Monitoring

    by Bhavasree Sreedhar, Nivin Thulasibai Sasidharan, Arbacheena Bora, Karthigeyan Annamalai, Yuvaraj Sivalingam, Elangovan Elamurugu

    Developing photodetectors with rapid response, broad spectral coverage, and self‐powered operation remains a major challenge since they are mutually exclusive. This challenge is tackled by compositing tin sulfide (SnS) and graphitic carbon nitride (g‐C 3 N 4 ) through a controlled incorporation of g‐C 3 N 4 (0.5–15 wt.%), to modulate depletion width, band alignment, and surface defects. The optimized composite (1 wt.% g‐ C 3 N 4 , named SG‐1) exhibits broadband absorption spanning 250–1400 nm, a strong zero‐bias photocurrent (2.24 µA), and rapid rise/decay times of 0.48/0.47 ms, which are among the fastest reported for SnS‐based photodetectors. Scanning Kelvin probe (SKP) analysis reveals a pronounced illumination‐induced work‐function modulation (ΔWF ≈ 0.23 eV), confirming enhanced built‐in field and reduced surface defect density. Correspondingly, SG‐1 achieves a responsivity of 2.8 mA/W and a detectivity of 1.9 × 10 9 Jones that is ∼4× greater than pristine SnS. The combined optical, electrical, and contact potential difference (CPD) establishes that g‐C 3 N 4 ‐driven depletion modulation is instrumental for rapid carrier dynamics. These results validate SnS/g‐C 3 N 4 composites as promising candidates for next‐generation ultrabroadband, low‐power, and high‐speed photodetectors for environmental sensing, optical communication, and IoT‐integrated systems.


  • Photo-supercapacitors for the Future: Integrating Solar Conversion and Energy Storage into a Single Platform

    by Love Bansal, Subin Kaladi Chondath, Nivin Thulasibai Sasidharan, Shailendra K. Saxena, Rajesh Kumar

    The integration of two major areas related to energy harvesting and storing photovoltaics with supercapacitors is garnering significant interest, making a wider technological impact in the domain of energy science and technology that aims to develop self-powered devices. Perovskite materials are one such photovoltaic material that is suitable for such device integration due to their exceptional power conversion efficiency and stability. While research is primarily focused on the enhancement of photovoltaic and supercapacitors' parameters separately, their low overall efficiency in integrated technology hinders their on-field applicability, keeping it away from the interest of industries. Various integration approaches, including conventional integration, three-electrode and two-electrode monolithic integration, are discussed for successful integration. Various strategies with a focus on charge transport layer and shared electrode selection, device configuration, and photoactive layer engineering have proven to be effective for the growth of integrated photovoltaic supercapacitors. The multifunctional applications of integrated technology in energy-conversion, storage, and saving applications have been discussed. Moreover, the discussion also highlights several challenges associated with the integrated technology alongside proposed measures to mitigate these bottlenecks.


  • Carrier–phonon coupling driven enhanced thermoelectric performance of Sn-substituted bismuth sulphide for intermediate-temperature applications

    by E. Karvannan, V. Vijay, T. S. Nivin, M. Navaneethan, J. Archana, A. Karthigeyan

    Sn substitution in Bi2S3 gives a significantly optimized power factor of 192 μW m−1 K−2 with a low lattice thermal conductivity of 0.340 W m−1 K−1, resulting in an enhanced zT of 0.42 at 623 K for the Bi1.90Sn0.10S3 sample.


  • Phonon engineering enabled reduction in thermal conductivity of SnS/Cu2Se composites: An experimental and numerical insights

    by Nivin Thulasibai Sasidharan, Vijay Vaiyapuri, Karvannan Elamurugan, Navaneethan Mani, Karthigeyan Annamalai