Arthur L. Malkani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Arthur L. Malkani has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
C S Bates
1 shared publicationDavid Helfet
1 shared publicationDouglas Pedersen
1 shared publicationGreg Rennirt
1 shared publicationK A Fee
1 shared publicationM J Voor
1 shared publication
Latest Publications
- 1 October 2001
- Published by Wolters Kluwer Health
- Vol. 51 (4) , 704-709
Increased Peak Contact Stress after Incongruent Reduction of Transverse Acetabular Fractures: A Cadaveric Model
The objective of this study was to determine the peak contact pressure with varying degrees of articular cartilage step-off in a transtectal acetabular fracture model. Five fresh frozen cadaveric hip joints were potted in a custom loading fixture. The five specimens were then tested at loads of 445 N (newton) (100 lb) and 1,335 N (300 lb) intact and after a transverse osteotomy at step-off levels from 0 to 5 mm in 1-mm increments. Articular cartilage step-off of greater than 1 mm led to significantly increased contact stress at the loaded acetabular articular surface. Mean peak pressure measured at 1,335 N of loading in all intact specimens before the osteotomy was approximately 10 MPa. Peak pressure after a transverse acetabular fracture did not change when the fracture was perfectly reduced. At 1 mm of step-off, the peak pressure increased by approximately 20% but was not statistically significant. With step-off of > 2 mm or greater, the peak pressure increase was approximately 50% and was statistically significant. On the basis of our study, transverse acetabular fractures with greater than 1 mm of displacement can lead to significant increase in peak pressure at the articular surface.
- 1 October 2001
- Published by Wolters Kluwer Health
- Vol. 51 (4) , 704-709
Increased Peak Contact Stress after Incongruent Reduction of Transverse Acetabular Fractures: A Cadaveric Model
The objective of this study was to determine the peak contact pressure with varying degrees of articular cartilage step-off in a transtectal acetabular fracture model. Five fresh frozen cadaveric hip joints were potted in a custom loading fixture. The five specimens were then tested at loads of 445 N (newton) (100 lb) and 1,335 N (300 lb) intact and after a transverse osteotomy at step-off levels from 0 to 5 mm in 1-mm increments. Articular cartilage step-off of greater than 1 mm led to significantly increased contact stress at the loaded acetabular articular surface. Mean peak pressure measured at 1,335 N of loading in all intact specimens before the osteotomy was approximately 10 MPa. Peak pressure after a transverse acetabular fracture did not change when the fracture was perfectly reduced. At 1 mm of step-off, the peak pressure increased by approximately 20% but was not statistically significant. With step-off of > 2 mm or greater, the peak pressure increase was approximately 50% and was statistically significant. On the basis of our study, transverse acetabular fractures with greater than 1 mm of displacement can lead to significant increase in peak pressure at the articular surface.