Rachid Abdessemed
Rachid Abdessemed has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Amor Ounissi
Univ Batna 2, Fac Technol, Dept Elect Engn, Batna, Algeria
4 shared publications - Azeddine Kaddouri
University of Moncton
3 shared publications - A. L. Nemmour
Laboratoire d'Electrotechnique LEC, Université Mentouri, Constantine, Algeria
1 shared publication - Abdelhamid Benakcha
Electrical Engineering Laboratory of Biskra LGEB, University of Biskra, Biskra, Algeria
1 shared publication - Abdelmalek Khezzar
University Fréres Mentouri Constantine 1, Algeria
1 shared publication - Azeddine Chaiba
Research Automatics Laboratory of Setif (LAS), Department of Electrical Engineering, Ferhat ABBAS University of Setif-1, Setif, Algeria; Department of Industrial Engineering, University of Khenchela, Algeria
1 shared publication
Latest Publications
- Open Access
- 5 November 2024
- Published by Dewspublication
- Vol. 20 (6) , 1089-1101
Measurement Of The Optimal Dimensions Of A Conduction Magneto-Hydrodynamic Pump Using The Tabu Search Optimization Technique
The focus of this article is the optimal design of a conduction magneto-hydrodynamic pump using the tabu search method. Tabu Search is a meta-heuristic that directs a local heuristic search procedure to investigate the solution space beyond local optimality. One of the primary components of tabu search is the use of adaptable memory, which offers a more flexible search. The optimization process considers mass minimization with geometric and electromagnetic constraints, presenting the results obtained.
- 5 November 2024
- Published by Dewspublication
- Vol. 20 (6) , 1089-1101
Open AccessMeasurement Of The Optimal Dimensions Of A Conduction Magneto-Hydrodynamic Pump Using The Tabu Search Optimization Technique
The focus of this article is the optimal design of a conduction magneto-hydrodynamic pump using the tabu search method. Tabu Search is a meta-heuristic that directs a local heuristic search procedure to investigate the solution space beyond local optimality. One of the primary components of tabu search is the use of adaptable memory, which offers a more flexible search. The optimization process considers mass minimization with geometric and electromagnetic constraints, presenting the results obtained.
- 19 March 2024
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEGLĄD ELEKTROTECHNICZNY
- Vol. 1 (3) , 127-131
Radial Basis Function Networks Based Synergetic Terminal Controller For Piezoelectric Actuator With Colman-Hodgdon Hysteresis Model
This article proposes an intelligent nonlinear control approach based on the concept of combining neural networks and the methodology of synergistic terminal control. We have introduced the notion of convergence in finite time through the improvement induced on the macrovariable. This approach is associated with the approximation criteria of unknown nonlinearities by a radial basis function neural network to a class of PEA piezoelectric actuator positioning mechanisms.RBF weights are adjusted using the terminal attractor concept in the PEA finite time control process.the stability of a closed-loop system is ensured by the Lyapunov method.The simulation results have demonstrated the robustness of the proposed approach and provide good results in terms of tracking the trajectory and provides a better overall performance than that of classical synergetic control.
- 19 March 2024
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEGLĄD ELEKTROTECHNICZNY
- Vol. 1 (3) , 127-131
Radial Basis Function Networks Based Synergetic Terminal Controller For Piezoelectric Actuator With Colman-Hodgdon Hysteresis Model
This article proposes an intelligent nonlinear control approach based on the concept of combining neural networks and the methodology of synergistic terminal control. We have introduced the notion of convergence in finite time through the improvement induced on the macrovariable. This approach is associated with the approximation criteria of unknown nonlinearities by a radial basis function neural network to a class of PEA piezoelectric actuator positioning mechanisms.RBF weights are adjusted using the terminal attractor concept in the PEA finite time control process.the stability of a closed-loop system is ensured by the Lyapunov method.The simulation results have demonstrated the robustness of the proposed approach and provide good results in terms of tracking the trajectory and provides a better overall performance than that of classical synergetic control.
- 25 July 2023
- Published by Springer Nature in Electrical Engineering
- Vol. 105 (6) , 4139-4156
Sensorless real-time implementation-based FS-MPCC and deadbeat predictive control with delay and dead-time compensation of PMSM using MRAS and T‐S fuzzy speed controller
- 25 July 2023
- Published by Springer Nature in Electrical Engineering
- Vol. 105 (6) , 4139-4156
Sensorless real-time implementation-based FS-MPCC and deadbeat predictive control with delay and dead-time compensation of PMSM using MRAS and T‐S fuzzy speed controller
- Open Access
- 1 June 2023
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 14 (2) , 827-832
NARMAX approach for micro positioning stage piezoelectric actuator hysteresis identification
The structure of the model may either be inferred via an experimental study or just by looking at the input and output data. A novel nonlinear autoregressive with exogenous inputs (NARMAX) method for identifying PEA piezoelectric positioning mechanisms is put forward in this study. The developed model enables accurate prediction of the hysteresis of the PEAs. The accuracy of the model built from the input and output data will be assessed by comparison with a LuGre model. The results of the identification show that the recommended approach is successful and that it has a high degree of identification precision within an absolute error range of one micron. The findings demonstrated the potential of the suggested method for classifying nonlinear PEAs.
- 1 June 2023
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 14 (2) , 827-832
Open AccessNARMAX approach for micro positioning stage piezoelectric actuator hysteresis identification
The structure of the model may either be inferred via an experimental study or just by looking at the input and output data. A novel nonlinear autoregressive with exogenous inputs (NARMAX) method for identifying PEA piezoelectric positioning mechanisms is put forward in this study. The developed model enables accurate prediction of the hysteresis of the PEAs. The accuracy of the model built from the input and output data will be assessed by comparison with a LuGre model. The results of the identification show that the recommended approach is successful and that it has a high degree of identification precision within an absolute error range of one micron. The findings demonstrated the potential of the suggested method for classifying nonlinear PEAs.
- Open Access
- 1 December 2022
- Published by Institute of Advanced Engineering and Science in International Journal of Applied Power Engineering (IJAPE)
- Vol. 11 (4) , 264-270
Synergetic control of micro positioning stage piezoelectric actuator
The work carried out in this article essentially relates to the application of a synergetic control to the piezoelectric positioning mechanism or piezoelectric actuator (PEA). A LuGre model has been followed, capturing the most physical phenomena, in order to be able to follow the most realistic and representative model possible. From this model, which is then identified by particle swarm optimization (PSO), we apply the synergetic control technique, which is a very efficient control method that allows demonstrating the good functioning of the stability of nonlinear system in closed loop. The simulation results have been compared to those obtained when using sliding mode to confer the best performance in terms of tracking error and minimization of oscillations.
- 1 December 2022
- Published by Institute of Advanced Engineering and Science in International Journal of Applied Power Engineering (IJAPE)
- Vol. 11 (4) , 264-270
Open AccessSynergetic control of micro positioning stage piezoelectric actuator
The work carried out in this article essentially relates to the application of a synergetic control to the piezoelectric positioning mechanism or piezoelectric actuator (PEA). A LuGre model has been followed, capturing the most physical phenomena, in order to be able to follow the most realistic and representative model possible. From this model, which is then identified by particle swarm optimization (PSO), we apply the synergetic control technique, which is a very efficient control method that allows demonstrating the good functioning of the stability of nonlinear system in closed loop. The simulation results have been compared to those obtained when using sliding mode to confer the best performance in terms of tracking error and minimization of oscillations.
- Open Access
- 25 October 2016
- Published by The Korean Institute of Electrical and Electronic Material Engineers in Transactions on Electrical and Electronic Materials
- Vol. 17 (5) , 252-256
The Study of the Electroconductive Liquids Flow in a Conduction Magnetohydrodynamic Pump
- 25 October 2016
- Published by The Korean Institute of Electrical and Electronic Material Engineers in Transactions on Electrical and Electronic Materials
- Vol. 17 (5) , 252-256
Open AccessThe Study of the Electroconductive Liquids Flow in a Conduction Magnetohydrodynamic Pump
- Open Access
- 1 January 2015
- Published by National Library of Serbia in Serbian Journal of Electrical Engineering
- Vol. 12 (3) , 333-343
Study of applying a hybrid standalone wind-photovoltaic generation system
The purpose of this paper is the study of applying a hybrid system wind/photovoltaic to supply a community in southern Algeria. Diesel generators are always used to provide such remote regions with energy. Using renewable energy resources is a good alternative to overcome such pollutant generators. Hybrid Optimization Model for Electric Renewable (HOMER) software is used to determine the economic feasibility of the proposed configuration. Assessment of renewable resources consisting in wind and solar potentials, load profile determination and sensitivity of different parameters analysis were performed. The cost of energy (COE) of 0.226 $/kWh is very competitive with those found in literature.
- 1 January 2015
- Published by National Library of Serbia in Serbian Journal of Electrical Engineering
- Vol. 12 (3) , 333-343
Open AccessStudy of applying a hybrid standalone wind-photovoltaic generation system
The purpose of this paper is the study of applying a hybrid system wind/photovoltaic to supply a community in southern Algeria. Diesel generators are always used to provide such remote regions with energy. Using renewable energy resources is a good alternative to overcome such pollutant generators. Hybrid Optimization Model for Electric Renewable (HOMER) software is used to determine the economic feasibility of the proposed configuration. Assessment of renewable resources consisting in wind and solar potentials, load profile determination and sensitivity of different parameters analysis were performed. The cost of energy (COE) of 0.226 $/kWh is very competitive with those found in literature.
- Open Access
- 1 January 2013
- Published by National Library of Serbia in Serbian Journal of Electrical Engineering
- Vol. 10 (2) , 261-274
Comparative study of a small size wind generation system efficiency for battery charging
This paper presents an energetic comparison between two control strategies of a small size wind generation system for battery charging. The output voltage of the direct drive PMSG is connected to the battery through a switch mode rectifier. A DC-DC boost converter is used to regulate the battery bank current in order to achieve maximum power from the wind. A maximum powertracking algorithm calculates the current command that corresponds to maximum power output of the turbine. The DC-DC converter uses this current to calculate the duty cycle witch is necessary to control the pulse width modulated (PWM) active switching device (IGPT). The system overview and modeling are presented including characteristics of wind turbine, generator, batteries, power converter, control system, and supervisory system. A simulation of the system is performed using MATLAB/SIMULINK.
- 1 January 2013
- Published by National Library of Serbia in Serbian Journal of Electrical Engineering
- Vol. 10 (2) , 261-274
Open AccessComparative study of a small size wind generation system efficiency for battery charging
This paper presents an energetic comparison between two control strategies of a small size wind generation system for battery charging. The output voltage of the direct drive PMSG is connected to the battery through a switch mode rectifier. A DC-DC boost converter is used to regulate the battery bank current in order to achieve maximum power from the wind. A maximum powertracking algorithm calculates the current command that corresponds to maximum power output of the turbine. The DC-DC converter uses this current to calculate the duty cycle witch is necessary to control the pulse width modulated (PWM) active switching device (IGPT). The system overview and modeling are presented including characteristics of wind turbine, generator, batteries, power converter, control system, and supervisory system. A simulation of the system is performed using MATLAB/SIMULINK.
- 21 March 2010
- Published by Elsevier in Renewable Energy
- Vol. 35 (10) , 2375-2380
Advanced Backstepping controller for induction generator using multi-scalar machine model for wind power purposes
- 21 March 2010
- Published by Elsevier in Renewable Energy
- Vol. 35 (10) , 2375-2380
Advanced Backstepping controller for induction generator using multi-scalar machine model for wind power purposes
- 1 January 2009
- Published by Inderscience Publishers in International Journal of Power and Energy Conversion
- Vol. 1 (4) , 399
STATCOM based voltage-frequency regulation for SEIG driven by an uncontrolled speed turbine
This article presents the analysis and the control of a stand-alone self excited induction generator (SEIG) intended for rural applications. SEIG along with the STATCOM with battery energy storage (BES) in its DC side makes it possible to control the terminal voltage and frequency during rotor speed and load variation. Constant frequency control is carried out by the load angle 'δ', without rotor speed control, while constant terminal voltage control is achieved via the modulation index 'm'. The 'SEIG' magnetisation characteristic and the 'STATCOM' rating are taken into consideration to determine the load interval where the terminal voltage and frequency can be controlled. The simulation results show good performances of the SEIG-STATCOM system under different perturbations.
- 1 January 2009
- Published by Inderscience Publishers in International Journal of Power and Energy Conversion
- Vol. 1 (4) , 399
STATCOM based voltage-frequency regulation for SEIG driven by an uncontrolled speed turbine
This article presents the analysis and the control of a stand-alone self excited induction generator (SEIG) intended for rural applications. SEIG along with the STATCOM with battery energy storage (BES) in its DC side makes it possible to control the terminal voltage and frequency during rotor speed and load variation. Constant frequency control is carried out by the load angle 'δ', without rotor speed control, while constant terminal voltage control is achieved via the modulation index 'm'. The 'SEIG' magnetisation characteristic and the 'STATCOM' rating are taken into consideration to determine the load interval where the terminal voltage and frequency can be controlled. The simulation results show good performances of the SEIG-STATCOM system under different perturbations.